Highly-Branched Poly(N-isopropylacrylamide) as a Component in Poly(dopamine) Films

Experimental Methods to Get Polydopamine Films: A Comparative Review on the Synthesis Methods, the Films' Composition and Properties

In 2007, polydopamine (PDA) films were shown to be formed spontaneously on the surface of all known classes of materials by simply dipping those substrates in an aerated dopamine solution at pH = 8.5 in the presence of Tris(hydroxymethyl) amino methane buffer. This universal deposition method has raised a burst of interest in surface science, owing not only to the universality of this water based one pot deposition method but also to the ease of secondary modifications. Since then, PDA films and particles are shown to have applications in energy conversion, water remediation systems, and last but not least in bioscience. The deposition of PDA films from aerated dopamine solutions is however a slow and inefficient process at ambient temperature with most of the formed material being lost as a precipitate. This incited to explore the possibility to get PDA and related films based on other catecholamines, using other oxidants than dissolved oxygen and other deposition methods. Those alternatives to get PDA and related films are reviewed and compared in this paper. It will appear that many more investigations are required to get better insights in the relationships between the preparation method of PDA and the properties of the obtained coatings.

Fabrication and Characterization of Polyelectrolyte Coatings by Polymerization and Co-Deposition of Acrylic Acid Using the Dopamine in Weak Acid Solution

Existing medical materials (such as silicone rubber, glass slides, etc.) fail to meet the functional requirements of biosensing, cell culture, and drug delivery due to their poor wettability. The preparation of polyelectrolyte coatings with excellent wettability and protein adsorption helps broaden the application of medical materials. Poly(acrylic acid) (PAA) is a common polyelectrolyte with stronger protein adsorption, but the existing methods for obtaining PAA coating have certain shortcomings to limit their industrial applications. In this study, dopamine (DA) was used to polymerize and co-deposit acrylic acid (AA) in weak acid solution to functionalize the surface of materials, and the effects of different mass ratios of DA/AA on the wettability and protein adsorption of the coating were deeply investigated. The results demonstrate that PDA/PAA coating is successfully prepared on the surface of four substrates and greatly reduces the water contact angle of these surfaces. Moreover, these coatings show excellent protein adsorption, and the amount of adsorbed protein on the coated QCM chip is increased by 57.74% than the uncoated QCM chip. In addition, the coating has a certain pH responsiveness, and its wettability and protein adsorption are closely related to the pH of the solution. The preparation strategy proposed is simple and substrate-independent, which provides valuable insights into the application of the one-step polymerization and co-deposition strategy under weak acid conditions.

Recent advances in dopamine-based materials constructed via one-pot co-assembly strategy

Dopamine-based materials have attracted widespread interest due to the outstanding physicochemical and biological properties. Since the first report on polydopamine (PDA) films, great efforts have been devoted to develop new fabrication strategies for obtaining novel nanostructures and desirable properties. Among them, one-pot co-assembly strategy offers a unique pathway for integrating multiple properties and functions into dopamine-based platform in a single simultaneous co-deposition step. This review focuses on the state of the art development of one-pot multicomponent self-assembly of dopamine-based materials and summarizes various single-step co-deposition approaches, including PDA-assisted adaptive encapsulation, co-assembly of dopamine with other molecules through non-covalent interactions or covalent interactions. Moreover, emerging applications of dopamine-based materials in the fields ranging from sensing, cancer therapy, catalysis, oil/water separation to antifouling are outlined. In addition, some critical remaining challenges and opportunities are discussed to pave the way towards the rational design and applications of dopamine-based materials.

Polymerization-Mediated Multifunctionalization of Living Cells for Enhanced Cell-Based Therapy

Surface decoration of living cells by exogenous substances offers a unique tool for understanding and tuning cell behaviors, which plays a critical role in cell-based therapy. Here, a facile yet versatile approach for decorating individual living cells with multimodal coatings is reported. By simply co-depositing with dopamine under a cytocompatible condition, various functional small molecules and polymers can be encoded to form a multifunctional coating on a cell's surface. The accessibility and versatility of this method to decorate diverse cells, including bacteria, fungi, and mammalian cells is demonstrated. With the ability to tune surface functions, ligand co-deposited gut microbiota is prepared as oral therapeutics for targeted treatment of colitis. Given the dual cytoprotective and targeting effects of the coating, decorated cells show more than 30-times higher bioavailability in the gut and fourfold higher accumulation in the inflamed tissue in comparison with those of uncoated bacteria. Multimodal therapeutic cells further validate strikingly increased treatment efficacy over clinical aminosalicylic acid in colitis mice. Decorating with multifunctional coatings proposes a robust platform for developing multimodal cells for enhanced cell-based therapy.

Enhanced biosensing strategies using electrogenerated chemiluminescence: recent progress and future prospects

An overview of enhancement strategies for highly sensitive ECL-based sensing of bioanalytes enabling early detection of cancer.

A novel polydopamine electrochemiluminescence organic nanoparticle-based biosensor for parathyroid hormone detection

In this work, polydopamine electrochemiluminescence (ECL)-organic nanoparticles (EONs) based immunosensing strategy was designed for parathyroid hormone (PTH) detection. Dopamine is oxidized and polymerized to form polydopamine organic nanoparticle via self-polymerization process. Unlike the low photoluminescent efficiency and unsatisfactory fluorescence characters of the fluorescent organic nanoparticles (FONs), the polydopamine EONs do not only show unique physicochemical properties and excellent biocompatibility, but also provide ideal electrochemical properties and bright ECL signals, which can be employed as high-quality ECL luminophores. The ECL-related properties and performance of the EONs are further discussed in this paper. The sensing method has a linear response in the range of 0.05-8 ng/mL with a detection limit of 17 pg/mL. The applicability of this method is evaluated through the determination of PTH in human plasma samples with satisfactory results. To our best knowledge, this was the first time about the exploration of polydopamine organic nanoparticles as ECL luminophores in the biosensing application.

Co-deposition Kinetics of Polydopamine/Polyethyleneimine Coatings: Effects of Solution Composition and Substrate Surface

Polydopamine-based chemistry has been employed for various surface modifications attributed to the advantages of universality, versatility, and simplicity. Co-deposition of polydopamine (PDA) with polyethyleneimine (PEI) has then been proposed to realize one-step fabrication of functional coatings with improved morphology uniformity, surface hydrophilicity, and chemical stability. Herein, we report the co-deposition kinetics related to the solution composition with different dopamine/PEI ratios, PEI molecular weights, dopamine/PEI concentrations, and the substrate surface with varying chemistry and wettability. The addition of PEI to dopamine solution suppresses the precipitation of PDA aggregates, resulting in an expanded time window of steady co-deposition compared with that of PDA deposition. Low-molecular-weight PEI at low concentration accelerates the co-deposition process, while high-molecular-weight PEI and high concentration of either PEI or dopamine/PEI are detrimental to the co-deposition efficiency. Meanwhile, the surface morphology and chemical composition of the co-deposition coatings can be regulated by the solution conditions during co-deposition. Moreover, obvious deviations in the co-deposition rate and the amount of substrates bearing various functional groups, such as alkyl, phenyl, hydroxyl, and carboxyl, are revealed, which are quite different from PDA deposition. The initial adsorption rates further reflect the change in interactions between the aggregates and these substrates caused by PEI, which follows the sequence of carboxyl > hydroxyl > alkyl > phenyl. These results provide deep insights into the PDA/PEI co-deposition process on various substrates.

Tetrapolymer Network Hydrogels via Gum Ghatti-Grafted and N-H/C-H-Activated Allocation of Monomers for Composition-Dependent Superadsorption of Metal Ions

Herein, gum ghatti (GGTI)-g-[sodium acrylate (SA)-co-3-(N-(4-(4-methyl pentanoate))acrylamido)propanoate (NMPAP)-co-4-(acrylamido)-4-methyl pentanoate (AMP)-co-N-isopropylacrylamide (NIPA)] (i.e., GGTI-g-TetraP), a novel interpenetrating tetrapolymer network-based sustainable hydrogel, possessing extraordinary physicochemical properties and excellent recyclability, has been synthesized via grafting of GGTI and in situ strategic protrusion of NMPAP and AMP during the solution polymerization of SA and NIPA, through systematic multistage optimization of ingredients and temperature, for ligand-selective superadsorption of hazardous metal ions (M(II)), such as Sr(II), Hg(II), and Cu(II). The in situ allocation of NMPAP and AMP via N-H and C-H activations, grafting of GGTI into the SA-co-NMPAP-co-AMP-co-NIPA (TetraP) matrix, the effect of comonomer compositions on ligand-selective adsorption, crystallinity, thermal stabilities, surface properties, swellability, adsorption capacities (ACs), mechanical properties, and the superadsorption mechanism have been apprehended via extensive microstructural analyses of unloaded and/or loaded GGTI-g-TetraP1 and GGTI-g-TetraP2 bearing SA/NIPA in 8:1 and 2:1 ratios, respectively, using Fourier transform infrared (FTIR), 1H/13C/DEPT-135 NMR, X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis, differential scanning calorimetry, X-ray diffraction, field emission scanning electron microscopy, rheological analysis, and energy-dispersive X-ray spectrometry, along with measuring % gel content, pH at point of zero charge (pHPZC), and % graft ratio. The thermodynamically spontaneous chemisorption has been inferred from FTIR, XPS, fitting of kinetics data to pseudo-second-order model, and activation energies. The chemisorption data have exhibited excellent fitting to the Langmuir isotherm model. For Sr(II), Hg(II), and Cu(II), ACs were 1940.24/1748.36, 1759.50/1848.03, and 1903.64/1781.63 mg g-1, respectively, at 293 K, 0.02 g of GGTI-g-TetraP1/2, and initial concentration of M(II) = 500-1000 ppm.

Star-Shaped Thermoresponsive Polymers with Various Functional Groups for Cell Sheet Engineering

This study demonstrates the facile preparation of poly(N-isopropylacrylamide) (PNIPAM)-immobilized Petri dishes by drop-casting a star-shaped copolymer of hyperbranched polystyrene (HBPS) possessing PNIPAM arms (HBPS-g-PNIPAM) functionalized with polar groups. HBPS was synthesized via reversible addition-fragmentation chain transfer (RAFT) self-condensing vinyl polymerization (SCVP), and HBPS polymers with different terminal structures were prepared by changing the monomer structure. HBPS-g-PNIPAM was synthesized by the grafting of PNIPAM from each terminal of HBPS. To tune the cell adhesion and detachment properties, polar functional groups such as carboxylic acid and dimethylamino groups were introduced to HBPS-g-PNIPAM. Based on surface characterization using scanning transmission electron microscopy (STEM), X-ray photoelectron spectroscopy (XPS), and contact angle measurements, the advantage of the hyperbranched structure for the PNIPAM immobilization was evident in terms of the uniformity, stability, and thermoresponsiveness. Successful cell sheet harvesting was demonstrated on dishes coated with HBPS-g-PNIPAM. In addition, the cell adhesion and detachment properties could be tuned by the introduction of polar functional groups.

Mussel-inspired hydrogel tissue adhesives for wound closure

Tissue adhesives have been introduced as a promising alternative for the traditional wound closure method of suturing.

Mixed poly(dopamine)/poly(L-lysine) (composite) coatings: from assembly to interaction with endothelial cells

Engineered polymer films are of significant importance in the field of biomedicine. Poly(dopamine) (PDA) is becoming more and more a key player in this context. Herein, we deposited mixed films consisting of PDA and poly(L-lysine) (PLL) of different molecular weights. The coatings were characterized by quartz crystal microbalance with dissipation monitoring, atomic force microscopy, and X-ray photoelectron spectroscopy. The protein adsorption to the mixed films was found to decrease with increasing amounts of PLL. PDA/PLL capsules were also successfully assembled. Higher PLL content in the membranes reduced their thickness while the ζ-potential increased. Further, endothelial cell adhesion and proliferation over 96 h were found to be independent of the type of coating. Using PDA/PLL in liposome-containing composite coatings showed that sequential deposition of the layers yielded higher liposome trapping compared to one-step adsorption except for negatively charged liposomes. Association/uptake of fluorescent cargo by adherent endothelial cells was found to be different for PDA and PDA/PLL films. Taken together, our findings illustrate the potential of PDA/PLL mixed films as coatings for biomedical applications.

Star-shaped poly(2-methyl-2-oxazoline)-based films: rapid preparation and effects of polymer architecture on antifouling properties

Star-shaped poly(2-methyl-2-oxazoline)-based films prepared through polydopamine-assistance provided enhanced antifouling properties than the linear ones, and showed superior stability than PEG films.

Cell-penetrating hyperbranched polyprodrug amphiphiles for synergistic reductive milieu-triggered drug release and enhanced magnetic resonance signals

The rational design of theranostic nanoparticles exhibiting synergistic turn-on of therapeutic potency and enhanced diagnostic imaging in response to tumor milieu is critical for efficient personalized cancer chemotherapy. We herein fabricate self-reporting theranostic drug nanocarriers based on hyperbranched polyprodrug amphiphiles (hPAs) consisting of hyperbranched cores conjugated with reduction-activatable camptothecin prodrugs and magnetic resonance (MR) imaging contrast agent (Gd complex), and hydrophilic coronas functionalized with guanidine residues. Upon cellular internalization, reductive milieu-actuated release of anticancer drug in the active form, activation of therapeutic efficacy (>70-fold enhancement in cytotoxicity), and turn-on of MR imaging (∼9.6-fold increase in T1 relaxivity) were simultaneously achieved in the simulated cytosol milieu. In addition, guanidine-decorated hPAs exhibited extended blood circulation with a half-life up to ∼9.8 h and excellent tumor cell penetration potency. The hyperbranched chain topology thus provides a novel theranostic polyprodrug platform for synergistic imaging/chemotherapy and enhanced tumor uptake.

Liposome-containing polymer films and colloidal assemblies towards biomedical applications

Liposomes are important components for biomedical applications. Their unique architecture and versatile nature have made them useful carriers for the delivery of therapeutic cargo. The scope of this minireview is to highlight recent developments of biomimetic liposome-based multicompartmentalized assemblies of polymer thin films and colloidal carriers, and to outline a selection of recent applications of these materials in bionanotechnology.

Poly(N-isopropylacrylamide)/poly(dopamine) capsules

Polymer capsules are an interesting concept considered in nanobiotechnology. Approaches that facilitate their assembly remain sought after. Poly(dopamine) (PDA) has been considered and successfully applied in this context. We recently demonstrated that PDA could be copolymerized with different types of poly(N-isopropylacrylamide) (pNiPAAm) to assemble mixed films on planar substrates. Herein, we transferred this approach onto colloidal substrates and characterized the film thickness depending on the film composition and template particles size. While the membrane of capsules assembled using 5 μm template particles exhibited strong dependency on the film composition, smaller templates led to capsules with similar membrane thickness. We then compared the permeability of different capsules using fluorescently labeled dextran and fluorescein. We found that the permeability of capsules was heavily dependent on the polymer composition and the template particle size. These fundamental findings contribute to the potential of these capsules, assembled in one-step, for biomedical applications.

Dopamine-assisted deposition of dextran for nonfouling applications

Nonfouling surfaces are essential for many biomedical applications, such as diagnostic biosensors and blood- or tissue-contacting implants. In this study, we demonstrate a simple one-step method to introduce dextran onto various substrates based on dopamine polymerization. It has been shown for the first time that dextran molecules could be incorporated into a dopamine polymerization product via mixing dextran with dopamine in a slightly alkaline solution. The codeposited film was characterized by X-ray photoelectron spectroscopy (XPS), the water contact angle, ellipsometry, and atomic force microscopy (AFM). Results reveal that it is possible to control the thickness and surface roughness via the deposition time and deposition repeat cycles. Furthermore, quartz crystal microbalance (QCM) measurements show that the dextran-modified surface inhibits protein adhesion. In addition, cell attachment has been significantly inhibited on dextran-modified surfaces even after exposure to water for as long as 2 months. The described dopamine-assisted dextran modification represents a simple and universal method for nonfouling surface preparation and can be potentially applied to improve the performance of various medical devices and materials.

Recent progress of liposomes in nanomedicine

Liposome formulations are highlighted focusing on their chemical modification, interaction with cells, and use in substrate-mediated drug delivery and cell mimicry.