Initial Partition and Aggregation of Uncharged Polyaromatic Molecules at the Oil–Water Interface: A Molecular Dynamics Simulation Study

Inhibitory effects of nobiletin-mediated interfacial instability of bile salt emulsified oil droplets on lipid digestion

Previous lipase inhibitors studies mainly focus on the binding between inhibitors and lipase, ignoring the impact of inhibitors on the oil-water interface of lipid droplets. This study aimed to investigate the effect of nobiletin (NBT) from Citri Reticulatae Pericarpium on the oil-water interface properties and lipid digestion. Here, we found that NBT could destroy bile salt (BS)-stabilized lipid droplets and thus inhibited free fatty acid release, owing to the interaction between NBT and BS at the oil-water interface, and reducing the stability of the oil-water interface (the stability index decreased from 91.15 ± 2.6 % to 66.5 ± 3.6 %). Further, the molecular dynamics simulation and isothermal titration calorimetry revealed that NBT could combine with BS at oil-water interface through intermolecular interactions, including hydrogen bonds, Van der Waals force, and steric hindrance. These results suggest that the interfacial instability of NBT mediated BS emulsified oil droplets may be another pathway to inhibit lipid digestion.

Adsorption of Asphaltenes at Model Oil/Brine Interface: Influence of Solvent Polarity

With the exploitation of heavy oil worldwide, the influence of asphaltene aggregation in the oil phase on the stability of crude oil emulsion has been paid more and more attention. Under this background, the effects of solvent polarity on model oil/brine water interfacial properties and emulsion stability are investigated in this study. It is demonstrated that there is a critical asphaltene concentration for the formation of a stable emulsion. This critical concentration is then found to increase from 80 to 500 ppm with the mixing ratio of methylnaphthalene to n-decane changed from 2:3 to 7:3. The dynamic light scattering experiment shows that the average aggregate size increases abruptly from 132.8 to 261.1 nm at 2:3 mixing ratio of methylnaphthalene to n-decane once the asphaltenes are added to above the critical concentration. Accordingly, the diffusion coefficient of the asphaltenes decreases sharply from 4.36 × 10-12 to 5.68 × 10-13 m2/s. Similar conclusions are also found for the other mixing ratios of 1:1, 3:2, and 7:3. Besides, the aggregation degree of asphaltenes weakens, and the diffusion coefficient enlarges at the same asphaltene concentration with the enhancement of the solvent polarity. Further, the interfacial experiments manifest that the equilibrium interfacial dilation modulus decreases from 38.42 to 23.65 mN/m with the mixing ratio of methylnaphthalene to n-decane increased from 2:3 to 7:3. It can thus be inferred that the structural strength of the interfacial film decreases with the enhancement of the solvent polarity.

Simulation Investigation on the Influence Mechanism of Toluene and Heptane on the Aggregation of Asphaltene Molecules

Asphaltenes are a group of compounds that are soluble in benzene and toluene but insoluble in nonpolar small molecule n-alkanes. The asphaltene aggregation in the asphaltene-heptane-toluene system was studied using molecular dynamics (MD) simulation, and the interaction between asphaltene molecules during this process was also revealed from the evolution of the density field, radial distribution function (RDF), and intermolecular distance of asphaltenes. Three main findings were made: (1) more asphaltene precipitates (heptane) were contained, and more asphaltene dimers or trimers were formed during the MD simulation; (2) asphaltene molecules interacted with each other to form aggregates in the form of π-π or H-bond interaction. The stable distance of the π-π interaction was 3.3-3.5 Å, and the stable distance of the H-bond connection was 1.7-1.9 Å. (3) The asphaltene interaction in the heptane-rich system was dominated by π-π interaction between asphaltene molecules. However, the asphaltene interactions in the toluene-rich system were mainly the π-π interaction between asphaltene molecules and toluene and the H-bond interaction between the side chains of asphaltene molecules. The results of this study can aid in understanding how asphaltene molecules aggregate and self-associate and can also offer theoretical support for flow assurance in systems used to produce crude oil.

A Novel Demulsifier with Strong Hydrogen Bonding for Effective Breaking of Water-in-Heavy Oil Emulsions

In the heavy petroleum industry, the development of efficient demulsifiers for the effective breaking of interfacially active asphaltenes (IAA)-stabilized water-in-heavy oil (W/HO) emulsions is a highly attractive but challenging goal. Herein, a novel nitrogen and oxygen containing demulsifier (JXGZ) with strong hydrogen bonding has been successfully synthesized through combining esterification, polymerization and amidation. Bottle tests indicated that JXGZ is effectual in quickly demulsifying the IAA-stabilized W/HO emulsions; complete dehydration (100%) to the emulsions could be achieved in 4 min at 55 °C using 400 ppm of JXGZ. In addition, the effects of demulsifier concentration, temperature and time on the demulsification performance of JXGZ are systematically analyzed. Demulsification mechanisms reveal that the excellent demulsification performance of JXGZ is attributed to the strong hydrogen bonding between JXGZ and water molecules (dual swords synergistic effect under hydrogen bond reconstruction). The interaction of the "dual swords synergistic effect" generated by two types of hydrogen bonds can quickly break the non-covalent interaction force (π-π stacking, Van der Waals force, hydrogen bonds) of IAA at the heavy oil-water interface, quickly promote the aggregation and coalescence of water molecules and finally achieve the demulsification of W/HO emulsions. These findings indicate that the JXGZ demulsifier shows engineering application prospects in the demulsification of heavy oil-water emulsions, and this work provides the key information for developing more efficient chemical demulsifiers suitable for large-scale industrial applications.

Multiscale combined techniques for evaluating emulsion stability: A critical review

Emulsions are multiscale and thermodynamically unstable systems which will undergo various unstable processes over time. The behavior of emulsifier molecules at the oil-water interface and the properties of the interfacial film are very important to the stability of the emulsion. In this paper, we mainly discussed the instability phenomena and mechanisms of emulsions, the effects of interfacial films on the long-term stability of emulsions and summarized a set of systematic multiscale combined methods for studying emulsion stability, including droplet size and distribution, zeta-potential, the continuous phase viscosity, adsorption mass and thickness of the interfacial film, interfacial dilatational rheology, interfacial shear rheology, particle tracking microrheology, visualization technologies of the interfacial film, molecular dynamics simulation and the quantitative evaluation methods of emulsion stability. This review provides the latest research progress and a set of systematic multiscale combined techniques and methods for researchers who are committed to the study of oil-water interface and emulsion stability. In addition, this review has important guiding significances for designing and customizing interfacial films with different properties, so as to obtain emulsion-based delivery systems with varying stability, oil digestibility and bioactive substance utilization.

Quercetin: Its Antioxidant Mechanism, Antibacterial Properties and Potential Application in Prevention and Control of Toxipathy

Quercetin, as a flavonol compound found in plants, has a variety of biological activities. It is widely present in nature and the human diet, with powerful oxidative properties and biological activities. In this review, the antioxidant mechanism and broad-spectrum antibacterial properties of quercetin are revealed; the intervention effects of quercetin on pesticide poisoning and the pathway of action are investigated; the toxic effects of main mycotoxins on the collection and the detoxification process of quercetin are summarized; whether it is able to reduce the toxicity of mycotoxins is proved; and the harmful effects of heavy metal poisoning on the collection, the prevention, and control of quercetin are evaluated. This review is expected to enrich the understanding of the properties of quercetin and promote its better application in clinical practice.

Interfacial and molecular interactions between fractions of heavy oil and surfactants in porous media: Comprehensive review

The oil production by the natural energy in oil reservoirs is decreasing gradually. Only 25-30% of the world's reservoirs can be produced naturally, and different methods are employed to recover the remaining oil. The use of surfactants is one of the promising methods for unlocking the residual oil after natural depletion. In such a method, one of the main challenges is to study how surfactant, oil, and water interact and how porous media affect these interactions. Molecular dynamics (MD) simulation provides an opportunity to gain insights into this challenge. MD simulation can be used to study interactions between surfactant, oil, and water statically and dynamically in porous media. This paper presents a comprehensive review of interactions between surfactants and fractions of oil/heavy oil, including asphaltene, resin, aromatics, and saturates. Also, it explains the probable mechanisms of oil detachment from reservoir rock in the presence of surfactants. A thorough grasp of molecular interactions between surface-active agents and different fractions of oil helps us to develop successful surfactant-based oil recovery methods.

Switchable-Hydrophilicity Triethylamine: Formation and Synergistic Effects of Asphaltenes in Stabilizing Emulsions Droplets

In this study, SHT (switchable-hydrophilicity triethylamine, [Et₃NH]·[HCO₃]) has been synthesized and instrumentally characterized by Fourier transform⁻infrared spectroscopy (FTIR) and ¹³C nuclear magnetic resonance (NMR). The operational synthesis conditions of SHT were optimized and determined at 25 °C, Et₃N/H₂O volume ratio of 1:2 and CO₂ injection rate at 300 mL/min. When it was used to extract heavy oil from unconventional oil ore, it was found that it could break maltenes-in-water emulsions. When asphaltenes were present in the oil phase, it was observed that SHT could cooperate with asphaltenes. These results indicated that SHT works with asphaltenes, leading to synergistic effects in stabilizing oil⁻water (o/w) emulsions.

Determination of Asphaltene Critical Nanoaggregate Concentration Region Using Ultrasound Velocity Measurements

Asphaltenes constitute the heaviest, most polar and aromatic fraction of petroleum crucial to the formation of highly-stable water-in-crude oil emulsions. The latter occur during crude oil production as well as spills and cause difficulties to efficient remediation practice. It is thought that in nanoaggregate form, asphaltenes create elastic layers around water droplets enhancing stability of the emulsion matrix. Ultrasonic characterisation is a high-resolution non-invasive tool in colloidal analysis shown to successfully identify asphaltene nanoaggregation in toluene. The high sensitivity of acoustic velocity to molecular rearrangements and ease in implementation renders it an attractive method to study asphaltene phase properties. Currently, aggregation is thought to correspond to an intersection of two concentration-ultrasonic velocity regressions. Our measurements indicate a variation in the proximity of nanoaggregation which is not accounted for by present models. We attribute this uncertainty to physico-chemical heterogeneity of the asphaltene fraction driven by variation in molecular size and propose a critical nanoaggregation region. We treated asphaltenes from North and South American crude oils with ruthenium ion catalysed oxidation to characterize their n-alkyl appendages attached to aromatic cores. Principal component analysis was performed to investigate the coupling between asphaltene structures and velocity measurements and their impact on aggregation.

Competitive Adsorption of Naphthenic Acids and Polyaromatic Molecules at a Toluene-Water Interface

The early-stage competitive co-adsorption of interfacially active naphthenic acids (NAs) and polyaromatic (PA) molecules to a toluene-water interface from the bulk toluene phase was studied using molecular dynamics (MD) simulation. The NA molecules studied had the same polar functional group but different cycloaliphatic nonpolar tails, and a perylene bisimide (PBI)-based molecule was used as a representative PA compound. The results from our simulations suggest that the size and structural features of NA molecules greatly influence the interfacial activity of PA molecules and partitioning of NA molecules at the toluene-water interface. At low concentrations of PA (∼2.3 wt %) and NA (∼0.4 wt %) molecules, NA molecules containing large cycloaliphatic rings (e.g., four rings) or with a very long aliphatic tail (e.g., carbon chain length of 14) were observed to impede the migration of PA molecules to the interface, whereas small NA molecules containing two cycloaliphatic rings had little effect on the adsorption of PA molecules at the toluene-water interface. At high NA concentrations, the adsorption of PA molecules (∼5.75-17.25 wt %) was greatly hindered by the presence of small NA molecules (∼1.6-4.8 wt %) due to the solvation of PA nanoaggregates in the bulk. Adsorption mechanisms of PA and NA molecules at toluene-water interfaces were clarified through a detailed analysis on the interactions among different species in the system. The results obtained from this work provide insights into designing appropriate chemical demulsifiers or co-demulsifiers for breaking water-in-oil emulsions of great industrial applications.

Model molecules mimicking asphaltenes

Asphalthenes are typically defined as the fraction of petroleum insoluble in n-alkanes (typically heptane, but also hexane or pentane) but soluble in toluene. This fraction causes problems of emulsion formation and deposition/precipitation during crude oil production, processing and transport. From the definition it follows that asphaltenes are not a homogeneous fraction but is composed of molecules polydisperse in molecular weight, structure and functionalities. Their complexity makes the understanding of their properties difficult. Proper model molecules with well-defined structures which can resemble the properties of real asphaltenes can help to improve this understanding. Over the last ten years different research groups have proposed different asphaltene model molecules and studied them to determine how well they can mimic the properties of asphaltenes and determine the mechanisms behind the properties of asphaltenes. This article reviews the properties of the different classes of model compounds proposed and present their properties by comparison with fractionated asphaltenes. After presenting the interest of developing model asphaltenes, the composition and properties of asphaltenes are presented, followed by the presentation of approaches and accomplishments of different schools working on asphaltene model compounds. The presentation of bulk and interfacial properties of perylene-based model asphaltene compounds developed by Sjöblom et al. is the subject of the next part. Finally the emulsion-stabilization properties of fractionated asphaltenes and model asphaltene compounds is presented and discussed.

Interfacial sciences in unconventional petroleum production: from fundamentals to applications

With the ever increasing demand for energy to meet the needs of growth in population and improvement in the living standards, in particular in developing countries, the abundant unconventional oil reserves (about 70% of total world oil), such as heavy oil, oil/tar sands and shale oil, are playing an increasingly important role in securing global energy supply.