Humidity-modulated phase control and nanoscopic transport in supramolecular assemblies

Universal Access to Water-Compatible and Nanostructured Materials via the Self-Assembly of Cationic Alternating Copolymers

Herein, we report the water-assisted self-assembly of alternating copolymers bearing imidazolium cations and hydrophobic groups to create water-compatible and nanostructured materials. The copolymers efficiently absorbed water into the cationic segments from the outer environments, depending on the relative humidity. The absorbed water serves as hydrophilic molecules to modulate the weight fraction of hydrophilic/hydrophobic units in the samples. Thus, the morphologies and domain spacing of the nanostructures can be controlled by not only the side chains, but also the amount of absorbed water. The self-assembly of the cationic copolymers, developed herein, afforded universal access to various morphologies, including lamella, gyroid, and cylinder, in addition to the precision control of the domain spacing at the 0.01 nm level.

Homeotropic orientation of an ion-channel forming mesophase induced by nanotemplate wetting

Anodic aluminum oxide (AAO) membranes were used as templates to control orientation of an ion-channel forming columnar mesophase obtained by self assembly of a wedge-shaped sulfonate molecule. Inside the AAO structure, the director vector of the mesophase is oriented parallel to the pore axis due to the confinement effect. The molecular arrangement induced by the spatial confinement within the pores is extended over several microns into the remnant film on the AAO surface. The homeotropic alignment of the channels promotes unidimensional ion conduction through the film plane, which is manifested by a considerable increase in conductivity relative to isotropic samples.

Bicontinuous Gyroid Phase of a Water-Swollen Wedge-Shaped Amphiphile: Studies with In-Situ Grazing-Incidence X-ray Scattering and Atomic Force Microscopy

We report on formation of a bicontinuous double gyroid phase by a wedge-shaped amphiphilic mesogen, pyridinium 4′-[3″,4″,5″-tris-(octyloxy)benzoyloxy]azobenzene-4-sulfonate. It is found that this compound can self-organize in zeolite-like structures adaptive to environmental conditions (e.g., temperature, humidity, solvent vapors). Depending on the type of the phase, the structure contains 1D, 2D, or 3D networks of nanometer-sized ion channels. Of particular interest are bicontinuous phases, such as the double gyroid phase, as they hold promise for applications in separation and energy. Specially designed environmental cells compatible with grazing-incidence X-ray scattering and atomic force microscopy enable simultaneous measurements of structural parameters/morphology during vapor-annealing treatment at different temperatures. Such in-situ approach allows finding the environmental conditions at which the double gyroid phase can be formed and provide insights on the supramolecular structure of thin films at different spatial levels.

New complexes of liquid crystal discotic triphenylenes: induction of the double gyroid phase

Electron donor-acceptor liquid crystals have been attracting considerable attention due to possible applications in optoelectronics and photonics. The creation of such charge transfer complexes is a powerful and flexible instrument for modifying the structures and properties compared to those of the initial components. In the present work, such an approach is exemplified on new complexes formed via non-covalent interactions of triphenylene discotics, namely, 2,3,6,7,10,11-hexakis(pentyloxy) triphenylene (H5T) and 2-(acryloyloxypropyloxy)-3,6,7,10,11-pentapentylox-triphenylene (TPh-3A), with an electron acceptor, β-(2,4,7-trinitro-9-fluorenylideneaminooxy) propionic acid (TNF-carb). The structure of thin supported films of H5T, TPh-3A and their blends with TNF-carb was investigated by grazing-incidence wide-angle X-ray scattering using a synchrotron source. At room temperature, the pristine discotics crystallize in orthorhombic unit cells whereas the self-assembly of H5T and TPh-3A with TNF-carb results in a double gyroid and hexagonal phases, respectively. Formation of the double gyroid phase with the lattice parameter of 36.5 Å is driven by phase separation between the aromatic and alkyl regions of the system. It is supposed that the TNF-carb molecules of the complex are positioned in the nodes of the structure while the H5T molecules are located in the struts adjoining the nodes via triple junctions. For the hexagonal crystal of the TPh-3A/TNF-carb complex, the acceptor molecules are likely located in the interstices between the neighboring supramolecular columns of TPh-3A. The molecular structures of the blends were also explored by means of FTIR spectroscopy. A detailed FTIR spectra analysis illustrates fine changes in inter-molecular bonds. For example, the initially dimerized acceptor molecules totally disappear in the complex structures whereas in TPh-3A/TNF-carb additional H-bonds between the carboxylate group in TNF-carb and the ester group of TPh-3A form. The experimental data allows putting forward possible molecular models of the complex structures.

Mesostructure and orientation control of lyotropic liquid crystals in a polysiloxane matrix

As a preparation method for organic–inorganic or mesoporous inorganic materials via sol–gel condensation of a metal alkoxide, the combination of lyotropic liquid crystals (LLCs) and sol–gel chemistry is a versatile tool to fabricate various nanostructures. Despite previous investigations into such systems, no attempt has been made to utilize the dynamic switching functions of such nanostructures via the phase transition of LLCs in films. A polysiloxane containing an amine-hydrochloride group and a vinyl group was recently synthesized. By controlling the relative humidity, we achieved the phase transition of LLCs and on-demand UV-curing of LLC phases in the polysiloxane film. We further developed vertically oriented organic–inorganic nanochannels by using π−π interactions between discotic molecules and the substrate surface or the spontaneous vertical alignment of LLC containing azobenzene units.

An "on-off" switchable cubic phase with exceptional thermal stability and water sorption capacity

We report on the phase behaviour of a wedge-shaped mesogen, which can exist in two different states at room temperature, a stable columnar and a metastable cubic gyroid phase. The latter reveals exceptional stability and remarkable water sorption capacity accounted for by the locally-ordered peripheral alkyl chains.

Humidity-responsive phase transition and on-demand UV-curing in a hygroscopic polysiloxane–surfactant nanohybrid film

Humidity-responsive phase transition of a lyotropic liquid crystalline surfactant and on-demand UV-curing in a hygroscopic polysiloxane film.

In-Situ GISAXS Study of Supramolecular Nanofibers having Ultrafast Humidity Sensitivity

Self assembled nanofibers derived from donor-acceptor (D-A) pair of dodecyl methyl viologen (DMV) and potassium salt of coronene tetracarboxylate (CS) is an excellent material for the development of organic electronic devices particularly for ultrafast response to relative humidity (RH). Here we have presented the results of in-situ grazing incidence small angle x-ray scattering (GISAXS) measurements to understand aridity dependent self reorganization of the nanofibers. The instantaneous changes in the organization of the nanofibers was monitored with different equilibrium RH conditions. Additionally formation of nanofibers during drying was studied by GISAXS technique - the results show two distinct stages of structural arrangements, first the formation of a lamellar mesophase and then, the evolution of a distorted hexagonal lattice. The RH dependent GISAXS results revealed a high degree of swelling in the lattice of the micelles and reduction in the distortion of the hexagonal structure with increase in RH. In high RH condition, the nanofibers show elliptical distortion but could not break into lamellar phase as observed during formation through drying. This observed structural deformation gives insight into nanoscopic structural changes of the micelles with change in RH around it and in turn explains ultrafast sensitivity in its conductivity for RH variation.

Humidity-induced formation of water channels in supramolecular assemblies of wedge-shaped amphiphiles: the effect of the molecular architecture on the channel topology

Absorption of water by wedge-shaped amphiphilic mesogens results in the formation of nanometer-sized water channels in the supramolecular structure that can have 1D or 2D-shape.

Induction of bicontinuous cubic liquid-crystalline assemblies for polymerizable amphiphiles via tailor-made design of ionic liquids

The lyotropic liquid-crystalline behavior of polymerizable amphiphiles has been tuned by using tailor-made ionic liquids as solvents so as to induce the formation of bicontinuous cubic assemblies having 3D interconnected nanochannels. The fixation of the amphiphilic assemblies has been successfully achieved by in situ photopolymerization.

Designing the topology of ion nano-channels in the mesophases of amphiphilic wedge-shaped molecules

The wedge-shaped amphiphiles bearing sulfonate groups at the tip of the wedge are prone to form ion nano-channels upon exposure to a humid atmosphere. During swelling, water molecules preferentially accumulate in polar regions of the system resulting in the formation of a lyotropic phase. In this work, the details of the structure formation processes occurring upon swelling in water vapour, including determination of the size and topology of the ion nano-channels, are explored. The electron density profiles across the channel are obtained from the fits of the X-ray scattering data with two- and three-phase structural models the applicability of which is critically analysed. The results show that the ion channel size correlates not only with water uptake but also with the molecular architecture such as the structure of the rigid molecular fragment bearing a polar group. These findings can help optimising the ion transport for development of ion-selective membranes.

Thin Polymer Films with Continuous Vertically Aligned 1 nm Pores Fabricated by Soft Confinement

Membrane separations are critically important in areas ranging from health care and analytical chemistry to bioprocessing and water purification. An ideal nanoporous membrane would consist of a thin film with physically continuous and vertically aligned nanopores and would display a narrow distribution of pore sizes. However, the current state of the art departs considerably from this ideal and is beset by intrinsic trade-offs between permeability and selectivity. We demonstrate an effective and scalable method to fabricate polymer films with ideal membrane morphologies consisting of submicron thickness films with physically continuous and vertically aligned 1 nm pores. The approach is based on soft confinement to control the orientation of a cross-linkable mesophase in which the pores are produced by self-assembly. The scalability, exceptional ease of fabrication, and potential to create a new class of nanofiltration membranes stand out as compelling aspects.

Glycerol prevents dehydration in lipid cubic phases

Lipid cubic phase samples dry out and undergo phase transitions when exposed to air. We demonstrate experimentally and theoretically that adding glycerol controllably lowers the humidity at which cubic phases form. These results broaden the potential applications of cubic phases and open up the potential of a new humidity-responsive nanomaterial.

In Situ Studies of Molecular Self-Assembling during the Formation of Ion-Conducting Membranes for Fuel Cells

In present work a new setup for in situ studies of molecular self-assembling process for fabrication of ion-conducting membranes for “green” fuel cells was developed. Due to compactness, this unique setup can be used on the synchrotron beamlines. The GISAXS and optical microscopy data have shown the effectiveness of the control of molecular architecture by impact of high temperature, UV-irradiation and solvent vapors.

Experimental Evidence for Proposed Transformation Pathway from the Inverse Hexagonal to Inverse Diamond Cubic Phase from Oriented Lipid Samples

A macroscopically oriented inverse hexagonal phase (HII) of the lipid phytantriol in water is converted to an oriented inverse double diamond bicontinuous cubic phase (QII(D)). The initial HII phase is uniaxially oriented about the long axis of a capillary with the cylinders parallel to the capillary axis. The HII phase is converted by cooling to a QII(D) phase which is also highly oriented, where the cylindrical axis of the former phase has been converted to a ⟨110⟩ axis in the latter, as demonstrated by small-angle X-ray scattering. This epitaxial relationship allows us to discriminate between two competing proposed geometric pathways to convert HII to QII(D). Our findings also suggest a new route to highly oriented cubic phase coatings, with applications as nanomaterial templates.

Scalable fabrication of polymer membranes with vertically aligned 1 nm pores by magnetic field directed self-assembly

There is long-standing interest in developing membranes possessing uniform pores with dimensions in the range of 1 nm and physical continuity in the macroscopic transport direction to meet the needs of challenging small molecule and ionic separations. Here we report facile, scalabe fabrication of polymer membranes with vertically (i.e., along the through-plane direction) aligned 1 nm pores by magnetic-field alignment and subsequent cross-linking of a liquid crystalline mesophase. We utilize a wedge-shaped amphiphilic species as the building block of a thermotropic columnar mesophase with 1 nm ionic nanochannels, and leverage the magnetic anisotropy of the amphiphile to control the alignment of these pores with a magnetic field. In situ X-ray scattering and subsequent optical microscopy reveal the formation of highly ordered nanostructured mesophases and cross-linked polymer films with orientational order parameters of ca. 0.95. High-resolution transmission electron microscopy (TEM) imaging provides direct visualization of long-range persistence of vertically aligned, hexagonally packed nanopores in unprecedented detail, demonstrating high-fidelity retention of structure and alignment after photo-cross-linking. Ionic conductivity measurements on the aligned membranes show a remarkable 85-fold enhancement of conductivity over nonaligned samples. These results provide a path to achieving the large area control of morphology and related enhancement of properties required for high-performance membranes and other applications.