Probing the Interactions between Ionic Liquids and Water: Experimental and Quantum Chemical Approach

Towards Enhanced Tunability of Aqueous Biphasic Systems: Furthering the Grasp of Fluorinated Ionic Liquids in the Purification of Proteins

This work unfolds functionalized ABSs composed of FILs ([C2C1Im][C4F9SO3] and [N1112(OH)][C4F9SO3]), mere fluoro-containing ILs ([C2C1Im][CF3SO3] and [C4C1Im][CF3SO3]), known globular protein stabilizers (sucrose and [N1112(OH)][C4F9SO3]), low-molecular-weight carbohydrate (glucose), and even high-charge density salt (K3PO4). The ternary phase diagrams were determined, stressing that FILs highly increased the ability for ABS formation. The functionalized ABSs (FILs vs. mere fluoro-containing ILs) were used to extract lysozyme (Lys). The ABSs' biphasic regions were screened in terms of protein biocompatibility, analyzing the impact of ABS phase-forming components in Lys by UV-VIS spectrophotometry, CD spectroscopy, fluorescence spectroscopy, DSC, and enzyme assay. Lys partition behavior was characterized in terms of extraction efficiency (% EE). The structure, stability, and function of Lys were maintained or improved throughout the extraction step, as evaluated by CD spectroscopy, DSC, enzyme assay, and SDS-PAGE. Overall, FIL-based ABSs are more versatile and amenable to being tuned by the adequate choice of the phase-forming components and selecting the enriched phase. Binding studies between Lys and ABS phase-forming components were attained by MST, demonstrating the strong interaction between Lys and FILs aggregates. Two of the FIL-based ABSs (30 %wt [C2C1Im][C4F9SO3] + 2 %wt K3PO4 and 30 %wt [C2C1Im][C4F9SO3] + 25 %wt sucrose) allowed the simultaneous purification of Lys and BSA in a single ABS extraction step with high yield (extraction efficiency up to 100%) for both proteins. The purity of both recovered proteins was validated by SDS-PAGE analysis. Even with a high-charge density salt, the FIL-based ABSs developed in this work seem more amenable to be tuned. Lys and BSA were purified through selective partition to opposite phases in a single FIL-based ABS extraction step. FIL-based ABSs are proposed as an improved extraction step for proteins, based on their biocompatibility, customizable properties, and selectivity.

Computational study on organochlorine insecticides extraction using ionic liquids

Insecticides pose hazardous environmental effects and can enter the food chain and contaminate water resources. Ionic liquids (ILs) have recently drawn much interest as environmentally friendly solvents and have been an efficient choice for extracting pesticides because of their outstanding thermophysical characteristics and tunable nature. In this study, ILs were screened using COSMO-RS (Conductor-like Screening Model for Real Solvents) to extract organochlorine insecticides from water at 289 K. A total of 165 ILs, a combination of 33 cations with five anions, were screened by COSMO-RS to predict the selectivity and capacity of the organochlorine insecticides at infinite dilution. The Organochlorine insecticide compounds, such as benzene hexachloride (BHC), Heptachlor, Aldrin, Gamma-Chlordane (γ-Chlordane), Endrin, and Methoxychlor are selected for this study. Charge density profiles show that Endrin and Methoxychlor compounds are strong H-bond acceptors and weak H-bond donors, while the rest of the compounds are H-bond donors with no H-bond acceptor potential. Moreover, it has been shown that ILs composed of halides and heteroatomic anions in conjunction with cations have enhanced selectivity and capacity for insecticides. Moreover, the hydrophobic phosphonium-based ILs have enhanced selectivity and capacity for insecticides. In BHC extraction, the selectivity of 1,3-dimethyl-imidazolium chloride was found to be the highest at 1074.06, whereas 2-hydroxyethyl trimethyl ammonium chloride exhibited the highest capacity being 84.0.1,3-dimethyl-imidazolium chloride exhibits the highest performance index, which is 57064.77. In addition, the ILs that have been chosen are well-recognized as environmentally friendly and very effective solvents to extract insecticides from water. As a result, this study evaluated that ILs could be promising solvents that may be further developed for the extraction of insecticides from contaminated water.

A kinetics study of copper-catalysed click reactions in ionic liquids

Copper(I)-catalyzed azide-alkyne cycloaddition (CuAAC) reactions are of extensive interest in chemical synthesis. While the use of ionic liquids (ILs) as solvents for synthesis has been widely explored in recent years, the understanding of their influence on the mechanism and reactivity of CuAAC reactions remains poorly understood. Here, we investigate the kinetics of a phenylacetylene-benzylazide and acetylene-benzylazide CuAAC reaction to probe the influence of IL structure, including the role of the base used to promote the reaction and the importance of water content. The use of 'wet' ILs led to remarkable changes in the kinetic profile of the reaction by eliminating the initial induction period. The reaction rate was found to be dependent on the copper(I) source. The effect of an added base was also studied, with the use of a tertiary amine-bearing IL leading to high conversions in under 5 min at ambient temperature. The results of this study highlight the nature and complexity of CuAAC reactions in ILs. As more ILs are getting involved in industrial processes, the data obtained from this study are valuable for better understanding processes that affect the CuAAC reaction in IL media and for creating customized systems for organic synthesis, thus improving the efficiency and sustainability of such processes.

Screening ionic liquids for efficiently extracting perfluoroalkyl chemicals (PFACs) from wastewater

Liquid-liquid extraction (LLE) using ionic liquids (ILs)-based methods to remove perfluoroalkyl chemicals (PFACs), such as perfluorooctanoic acid (PFOA) and perfluorooctane sulfonic acid (PFOS), from wastewater, is an important strategy. However, the lack of physicochemical and LLE data limits the selection of the most suitable ILs for the extraction of PFACs. In this work, 1763 ILs for PFACs extraction from water were systematically screened using COSMOtherm to estimate the infinite dilution activity coefficient (lnγ^∞)of PFOA and PFOS in water and ILs. To evaluate the accuracy of COSMOtherm, 8 ILs with various lnγ^∞ values were selected, and their extraction efficiency (E) and distribution coefficient (D_exp) were measured experimentally. The results showed that the predicted lnγ^∞ decreased as the increase of experimental extraction efficiency of PFOA or PFOS, while the tendency of predicted distribution coefficient (D_pre) was consistent with the experimental (D_exp) results. This work provides an efficient basis for selecting ILs for the extraction of PFACs from wastewater.

Anion Effect on Forward Osmosis Performance of Tetrabutylphosphonium-Based Draw Solute Having a Lower Critical Solution Temperature

The applicability of ionic liquids (ILs) as the draw solute in a forward osmosis (FO) system was investigated through a study on the effect of the structural change of the anion on the FO performance. This study evaluated ILs composed of tetrabutylphosphonium cation ([P₄₄₄₄]⁺) and benzenesulfonate anion ([BS]^-), para-position alkyl-substituted benzenesulfonate anions (p-methylbenzenesulfonate ([MBS]^-) and p-ethylbenzenesulfonate ([EBS^-]), and methanesulfonate anion ([MS]^-). The analysis of the thermo-responsive properties suggested that the [P₄₄₄₄][MBS] and [P₄₄₄₄][EBS] ILs have lower critical solution temperatures (LCSTs), which play a beneficial role in terms of the reusability of the draw solute from the diluted draw solutions after the water permeation process. At 20 wt% of an aqueous solution, the LCSTs of [P₄₄₄₄][MBS] and [P₄₄₄₄][EBS] were approximately 36 °C and 25 °C, respectively. The water flux and reverse solute flux of the [P₄₄₄₄][MBS] aqueous solution with higher osmolality than [P₄₄₄₄][EBS] were 7.36 LMH and 5.89 gMH in the active-layer facing the draw solution (AL-DS) mode at osmotic pressure of 25 atm (20 wt% solution), respectively. These results indicate that the [P₄₄₄₄]⁺-based ionic structured materials with LCST are practically advantageous for application as draw solutes.

Influence of alkali metals on water dynamics inside imidazolium-based ionic liquid nano-domains

The global need to expand the design of energy-storage devices led to the investigation of alkali metal - Ionic Liquid (IL) mixtures as a possible class of electrolytes. In this study, 1D and 2D Nuclear Magnetic Resonance (NMR) and Electrochemical Impedance Spectroscopy (EIS) as well as Molecular Dynamics (MD) simulations were used to study the intermolecular interactions in imidazolium-based IL - water - alkali halide ternary mixtures. The 1H and 23Na 1D and 1H DOSY NMR spectra revealed that the presence of small quantities of NaCl does not influence the aggregation of water molecules in the IL nano-domains. The order of adding ionic compounds to water, as well as the certain water and NaCl molecular ratios, lead to the formation of isolated water clusters. Two ternary solutions representing different orders of compounds mixing (H2O+ IL + NaCl or H2O+ NaCl + IL) showed a strong dependence of the initial solvation shell of Na+ and the self-clustering of water. Furthermore, the behaviour of water was found to be independent from the conditions applied during the solution preparation, such as temperature and/or duration of stirring and aging. These findings could be confirmed by large differences in the amount of ionic species, observed in the ternary solutions and depending on the order of mixing/solute preparation.

Effect of ammonium hydroxide-based ionic liquids' freezing point and hydrogen bonding on suppression temperature of different gas hydrates

The study presents the effect of freezing point depression and hydrogen bonding energy interaction on four ammonium hydroxide-based ionic liquids (AHILs) of gas hydrate systems. The AHILs investigated are tetramethylammonium hydroxide, tetraethylammonium hydroxide, tetrapropylammonium hydroxide, and tetrabutylammonium hydroxide. The considered hydrate system includes methane (CH₄), carbon dioxide (CO₂), and three binary mixed gas hydrates (70-30 CO₂ + CH₄, 50-50 CO₂ + CH₄, 30-70 CO₂ + CH₄), which are often encountered in the flow assurance pipelines. The experimental temperature range is between 274.0 and 285.0 K, corresponding to pipeline pressures for different gas systems. The thermodynamic influence, i.e., average suppression temperature (ΔŦ) of the studied system, was reported for different mass concentrations (1, 5, and 10 wt%) and correlated with the freezing point depression and hydrogen bonding energy interaction of AHILs. The study also covers the structural impact of AHILs (in the form of alkyl chain variation) on the thermodynamic hydrate inhibition (THI) behaviour via freezing point and hydrogen bonding energy interactions. Findings revealed that the increased alkyl chain length of AHILs reduced the ΔŦ due to a decrease in hydrogen bonding ability. The highest THI inhibition (ΔŦ = 2.27 K) is attained from the lower alkyl chain AHIL, i.e., TMAOH (10 wt%) for the CO₂ hydrate system. The freezing point depression of AHILs is a concentration-dependent phenomenon. Increased concentration of the AHILs in the system yielded lower freezing point temperature, positively influencing hydrate mitigation. Although the study provided the initial insight between the freezing point tendency and hydrogen bonding energies of AHILs on thermodynamic inhibition (ΔŦ). Based on the freezing point depression and hydrogen bonding energy interaction, a more generalized correlation should be developed to predict any potential ionic liquids regarded as promising hydrate inhibitors.

Probing the distribution of ionic liquid mixtures at charged and neutral interfaces via simulations and lattice-gas theory

Room temperature ionic liquid solutions confined between neutral and charged surfaces are investigated by means of atomistic Molecular Dynamics simulations. We study 1-ethyl-3-methylimidazolium dicyanamide ([EMIm]⁺[DCA]^-) in water or dimethylsulfoxide (DMSO) mixtures in confinement between two interfaces. The analysis is based on the comparison of the molecular species involved and the charged state of the surfaces. Focus is given on the influence of different water/DMSO concentrations on the microstructuring and accumulation of each species. Thermodynamic aspects, such as the entropic contributions in the observed trends are obtained from the simulations using a lattice-gas theory. The results clearly underline the differences in these properties for the water and DMSO mixtures and unravel the underlying mechanisms and inherent details. We were able to pinpoint the importance of the size and the relative permittivity of the molecules in guiding their microstructuring in the vicinity of the surfaces, as well as their interactions with the latter, i.e. the solute-surface interactions. The influence of water and DMSO on the overscreening at charged interfaces is also discussed. The analysis on the molecular accumulation at the interfaces allows us to predict whether the accumulation is entropy or enthalpy driven, which has an impact in the removal of the molecular species from the surfaces. We discuss the impact of this work in providing an essential understanding towards a careful design of electrochemical elements.

Removal of Perfluorooctanoic Acid from Water Using a Hydrophobic Ionic Liquid Selected Using the Conductor-like Screening Model for Realistic Solvents

The conductor-like screening model for realistic solvents was used to identify ionic liquids (ILs) to efficiently extract perfluorooctanoic acid (PFOA). The infinite dilution chemical potentials of PFOA in 14 000 ILs were calculated and used as descriptors of the chemical affinities between the ILs and PFOA. Trihexyltetradecylphosphonium pivalate ([P6,6,6,14][Piv]) was found to be a good IL for extracting PFOA because it gave a well-balanced combination of a strong chemical attraction for PFOA and useful physicochemical properties. The results of experiments indicated that [P6,6,6,14][Piv] could remove >99.9% of the PFOA in an aqueous solution. However, problematic emulsification of IL in the aqueous phase occurred at PFOA/IL molar ratios <1.9-2.1, and this limited the PFOA removal rate to 80-91%. The ability of the used IL to extract PFOA was found to be partially regenerated by washing the IL with 1% NaOH, and the IL could be reused to extract PFOA with a removal rate decreased by ∼10% in each cycle.

Ion Dissociation in Ionic Liquids and Ionic Liquid Solutions

The extent to which cations and anions in ionic liquids (ILs) and ionic liquid solutions are dissociated is of both fundamental scientific interest and practical importance because ion dissociation has been shown to impact viscosity, density, surface tension, volatility, solubility, chemical reactivity, and many other important chemical and physical properties. When mixed with solvents, ionic liquids provide the unique opportunity to investigate ion dissociation from infinite dilution in the solvent to a completely solvent-free state, even at ambient conditions. The most common way to estimate ion dissociation in ILs and IL solutions is by comparing the molar conductivity determined from ionic conductivity measurements such as electrochemical impedance spectroscopy (EIS) (which measure the movement of only the charged, i.e., dissociated, ions) with the molar conductivity calculated from ion diffusivities measured by pulse field gradient nuclear magnetic resonance spectroscopy (PFG-NMR, which gives movement of all of the ions). Because the NMR measurements are time-consuming, the number of ILs and IL solutions investigated by this method is relatively limited. We have shown that use of the Stokes-Einstein equation with estimates of the effective ion Stokes radii allows ion dissociation to be calculated from easily measured density, viscosity, and ionic conductivity data (ρ, η, λ), which is readily available in the literature for a much larger number of pure ILs and IL solutions. Therefore, in this review, we present values of ion dissociation for ILs and IL solutions (aqueous and nonaqueous) determined by both the traditional molar conductivity/PFG-NMR method and the ρ, η, λ method. We explore the effect of cation and anion alkyl chain length, structure, and interaction motifs of the cation and anion, temperature, and the strength of the solvent in IL solutions.

What do we learn from enzyme behaviors in organic solvents? - Structural functionalization of ionic liquids for enzyme activation and stabilization

Enzyme activity in nonaqueous media (e.g. conventional organic solvents) is typically lower than in water by several orders of magnitude. There is a rising interest of developing new nonaqueous solvent systems that are more "water-like" and more biocompatible. Therefore, we need to learn from the current state of nonaqueous biocatalysis to overcome its bottleneck and provide guidance for new solvent design. This review firstly focuses on the discussion of how organic solvent properties (such as polarity and hydrophobicity) influence the enzyme activity and stability, and how these properties impact the enzyme's conformation and dynamics. While hydrophobic organic solvents usually lead to the maintenance of enzyme activity, solvents carrying functional groups like hydroxys and ethers (including crown ethers and cyclodextrins) can lead to enzyme activation. Ionic liquids (ILs) are designable solvents that can conveniently incorporate these functional groups. Therefore, we systematically survey these ether- and/or hydroxy-functionalized ILs, and find most of them are highly compatible with enzymes leading to high activity and stability. In particular, ILs carrying both ether and tert-alcohol groups are among the most enzyme-activating solvents. Future direction is to learn from enzyme behaviors in both water and nonaqueous media to design biocompatible "water-like" solvents.

Ultrafast vibrational dynamics of a trigonal planar anionic probe in ionic liquids (ILs): A two-dimensional infrared (2DIR) spectroscopic investigation

A major impediment limiting the widespread application of ionic liquids (ILs) is their high shear viscosity. Incorporation of a tricyanomethanide (TCM^-) anion in ILs leads to low shear viscosity and improvement of several characteristics suitable for large scale applications. However, properties including interactions of TCM^- with the local environment and dynamics of TCM^- have not been thoroughly investigated. Herein, we have studied the ultrafast dynamics of TCM^- in several imidazolium ILs using linear IR and two-dimensional infrared spectroscopy techniques. The spectral diffusion dynamics of the CN stretching modes of TCM^- in all ILs exhibit a nonexponential behavior with a short time component of ∼2 ps and a long time component spanning ∼9 ps to 14 ps. The TCM^- vibrational probe reports a significantly faster relaxation of ILs compared to those observed previously using linear vibrational probes, such as thiocyanate and selenocyanate. Our results indicate a rapid relaxation of the local ion-cage structure embedding the vibrational probe in the ILs. The faster relaxation suggests that the lifetime of the local ion-cage structure decreases in the presence of TCM^- in the ILs. Linear IR spectroscopic results show that the hydrogen-bonding interaction between TCM^- and imidazolium cations in ILs is much weaker. Shorter ion-cage lifetimes together with weaker hydrogen-bonding interactions account for the low shear viscosity of TCM^- based ILs compared to commonly used ILs. In addition, this study demonstrates that TCM^- can be used as a potential vibrational reporter to study the structure and dynamics of ILs and other molecular systems.

Stability of cellulase in ionic liquids: correlations between enzyme activity and COSMO-RS descriptors

Ionic liquids (ILs) are effective in pretreating cellulose for enhanced enzymatic saccharification, however ILs can inactivate cellulases. To guide the selection of ILs, the activity of cellulase was correlated with COSMO-RS calculations and descriptors of ILs including hydrogen bond (H-bond) basicity/acidity, polarity and ion size. Trends were deduced using an anion-series and a cation-series of ionic liquids in aqueous solutions. The activity in the cation-series was best correlated with the size of varied cations, whereas the activity in the anion-series showed a pronounced correlation to H-bond basicity and polarity of different anions. COSMO-RS was further used to predict the solubility of cellulose in ILs, which was correlated with cellulase activity on IL-pretreated cellulose. The best correlations were found between the enzyme activity in the anion-series ILs and the logarithmic activity coefficients, the H-bond energy, H-bond basicity and polarizability, underlining that the anion plays a crucial role in cellulose dissolution.

Cellulose in Ionic Liquids and Alkaline Solutions: Advances in the Mechanisms of Biopolymer Dissolution and Regeneration

This review is focused on assessment of solvents for cellulose dissolution and the mechanism of regeneration of the dissolved biopolymer. The solvents of interest are imidazole-based ionic liquids, quaternary ammonium electrolytes, salts of super-bases, and their binary mixtures with molecular solvents. We briefly discuss the mechanism of cellulose dissolution and address the strategies for assessing solvent efficiency, as inferred from its physico-chemical properties. In addition to the favorable effect of lower cellulose solution rheology, microscopic solvent/solution properties, including empirical polarity, Lewis acidity, Lewis basicity, and dipolarity/polarizability are determinants of cellulose dissolution. We discuss how these microscopic properties are calculated from the UV-Vis spectra of solvatochromic probes, and their use to explain the observed solvent efficiency order. We dwell briefly on use of other techniques, in particular NMR and theoretical calculations for the same purpose. Once dissolved, cellulose is either regenerated in different physical shapes, or derivatized under homogeneous conditions. We discuss the mechanism of, and the steps involved in cellulose regeneration, via formation of mini-sheets, association into “mini-crystals”, and convergence into larger crystalline and amorphous regions. We discuss the use of different techniques, including FTIR, X-ray diffraction, and theoretical calculations to probe the forces involved in cellulose regeneration.

Ion speciation: a key for the understanding of the solution properties of ionic liquid mixtures

Recently, combinations of two (or more) ionic liquids, known as ionic liquid mixtures, have become popular and have a broad range of applications. However, the fundamental knowledge on the molecular interactions that exist in ionic liquid mixtures is far from being understood. In this work, the experimental measurement of the water activity coefficient and computational modelling using Conductor-like Screening Model for Real Solvent (COSMO-RS) were carried out to get an insight into the molecular interactions that are present in ionic liquid mixtures in aqueous solution. The results show that the combination of two ionic liquids of different basicity in aqueous solution allows fine tuning of the water activities, covering a wide range of values that could replace several pure fluids. This is an important feature resulting from the unexpected ion speciation of the ionic liquid mixtures in aqueous solution.

Quantitative analysis of free water in ionic liquid-water mixtures

The purpose of this paper is to determine the amount of water in ionic liquid aqueous solutions that does not form hydrogen bonds (that is to say, free water). Here, the amount of free water was determined in mixtures of water and four ionic liquids based on the imidazolium cation: 1-Butyl-3methylimidazolium acetate, 1-Butyl-3methylimidazolium bromide, 1-Butyl-3methylimidazolium chloride, and 1-3, dimethyl-imidazolium chloride. Their ionic liquid mass fraction was between 0% and 80%. The amount of free water in the mixtures was determined from the concentration profiles obtained by analysing the near infrared spectra of the mixtures between 800 and 1070 nm using multivariate curve resolution-alternating least squares. The absorption band characteristic of the OH- group in the water is present in the spectral region considered. The analysis was done at three temperatures: 298.15, 313.15 and 333.15 K. The major conclusions obtained from a comparative analysis of the results are these: a) the length of the alkyl chain significantly affects the hydrophobicity of the cations when the molality of the ionic liquid in the solutions is higher than 1.435 mol/kg. b) for the solutions with the same cation, the amount of free water in the chloride solutions is lower than in the acetate and bromide solutions when the temperature is lower than 333.15 K. At this temperature, the capacity of acetate and bromide solutions to interact with water is the same. Between 298.15 and 333.15 K, the ionic liquid concentration at which there is no free water in the solutions ranges between 62.70% and 59.59% for the 1-3, dimethylimidazolium chloride, 66.72% and 87.75% for the 1-Butyl-3methylimidazolium chloride, 69.76% and 78.36% for the -1-Butyl-3methylimidazolium bromide and between 69.77% and 78.26% for the 1-Butyl-3methylimidazolium acetate. So, the ionic liquid with the greatest capacity to retain water is the 1-3, dimethylimidazolium chloride.

Hydration States of Cholinium Phosphate-Type Ionic Liquids as a Function of Water Content

We investigated the hydration states of cholinium phosphate-type ionic liquids (ILs) in relation to ion structure, focusing on the influence of the hydroxyl group of the cation and the alkyl chain length of the anion. Water activity measurements provided information on the macroscopic hydration states of the hydrated ILs, while NMR measurements and molecular dynamics simulations clearly showed the microscopic interactions and coordination of the water molecules. The hydrogen bonding networks in these ILs were influenced by the anion structure and water content, and the mobility of water molecules was influenced by the number of hydroxyl groups in the cation and anion.

The peculiar effect of water on ionic liquids and deep eutectic solvents

Ionic liquids (ILs) and deep eutectic solvents (DESs) have been suggested as eco-friendly alternatives to organic solvents. A trace amount of water is often unavoidable as impurity, and water is also added on purpose to reduce their problematically high viscosity and lower their high price. Understanding the distinct effects of water on the properties of ILs/DESs is highly important. In this review, we collect published experimental and theoretical results for IL/DES-H2O systems at varied water concentrations and analyze them. Results from mechanistic studies, thermodynamic modelling and advanced experiments are collected and critically discussed. Six commonly studied IL/DES-H2O systems were selected to map experimental observations onto microscopic results obtained in mechanistic studies. A great variety of distinct contours of the excess properties can be observed over the entire compositional range, indicating that the properties of IL/DES-H2O systems are highly unpredictable. Mechanistic studies clearly demonstrate that the added H2O rapidly changes the heterogeneous 3D structures of pure ILs/DESs, leading to very different properties and behaviour. There are similarities between aqueous electrolytes and IL/DES solutions but the bulky and asymmetric organic cations in ILs/DESs do not conform to the standard salt dissolution and hydration concepts. Thermodynamic modelling previously assumes ILs/DESs to be either a neutral ion-pair or completely dissociated ions, neglecting specific ion hydration effects. A new conceptual framework is suggested for thermodynamic modelling of IL/DES-H2O binary systems to enable new technologies for their practical applications.

Application of a computational model of natural deep eutectic solvents utilizing the COSMO-RS approach for screening of solvents with high solubility of rutin

The screening of natural deep eutectic solvents (NADES) to identify those with the ability to strongly solvate rutin was conducted using the COSMO-RS methodology. A NADES model was constructed that took into account the possible ionic and neutral forms of its constituents. The distributions of all forms were computed based on the equilibrium constants of neutralization reactions between amino and carboxylic acids. The proposed model was validated against the experimental solubilities of 15 NADES. A linear relationship between these data and the estimated activity coefficient values was found. The screening encompassed 126 different NADES. It was found that ten of them outperformed the best reference system. The most effective two-component solvent comprised proline combined with 2,3-diaminosuccinic acid, and the solubility of rutin in this solvent was found to be 130% greater than its solubility in the best reference system. The amino acids associated with the highest rutin solubilities were all cyclic, and the use of carboxylic acids with two carboxyl groups and a main chain consisting of two methylene groups with two amino substituents was observed to yield the best rutin solubilities. Because of the acidic properties of rutin, the presence of basic sites on the components of the NADES generally leads to enhanced solubility.

Enthalpic interactions in aqueous strong electrolytes upon addition of ionic liquids

The present study deals with the inter-ionic interactions between strong electrolytes and ionic liquids based on the thermodynamic properties such as excess partial molar enthalpy, HEIL, relative apparent molar enthalpy, φL, and the enthalpic interaction parameters. The thermodynamic properties of the systems are the key indicators to understand the interionic interactions. We have conducted a systematic investigation of the enthalpic behavior of aqueous solution of salts and ionic liquids and their mixtures. The present study also emphasizes how the HEIL values for the mixture of aqueous solution of ionic liquids and salts deviate from linearity as compared to those of the constituent aqueous ionic liquid or salt. This deviation from linearity for the HEIL values has been discussed here.

Ionic liquids as biocompatible stabilizers of proteins

Ionic liquids (ILs) have recently emerged as versatile solvents and additives in the field of biotechnology, particularly as stabilizers of proteins and enzymes. Of interest to the biotechnology industry is the formulation of stable biopharmaceuticals, therapeutic proteins, and vaccines which have revolutionized the treatment of many diseases including debilitating conditions such as cancers and auto-immune diseases. The stabilization of therapeutic proteins is typically achieved using additives that prevent unfolding and aggregation of these proteins during manufacture, transport, and long-term storage. To determine if ILs could be used in the formulation of stable therapeutic proteins, a thorough understanding of the effects of ILs on protein stability is needed, as well as understanding the toxicity of ILs on humans, and other considerations for formulation development such as viscosity and osmolality. In this review, we summarize recent developments on the stabilization of proteins and enzymes using ILs, with emphasis on identifying biocompatible ILs that may be suitable for the formulation of stable biopharmaceuticals in the future.

Distribution of N-Methylimidazole in Ionic Liquids/Organic Solvents Systems

The partition coefficients, Kmim, of N-methylimidazole (mim) in two-component systems composed of ionic liquid (IL) and a series of organic solvents immiscible with ILs (butyl acetate, ethyl acetate, tert-butyl methyl ether, diethyl ether and cyclohexane) were determined by a shake-flask method. The influence of different factors such as temperature, solvent polarity, mim concentration, and water content on Kmim by using 1-butyl-3-methylimidazolium chloride {[C4C1im]Cl} as a model compound was comprehensively studied. The calculated thermodynamic functions of transfer (∆trG0, ∆trH0, ∆trS0) showed that the mim migration (IL→organic phase) is a thermodynamically unfavorable and enthalpy-determined process in the temperature range of 298.15 to 328.15K; however, the results suggested that mim partition toward the organic phase can be enhanced by the rational manipulation of the extraction conditions. Experiments conducted with other 1-alkyl-3-methylimidazolim chlorides (CnC1im]Cl (n = 6, 8, 10) revealed that mim possesses similar behavior and can be successfully washed out from the ILs by extraction with organic solvents. The results obtained in this study give some clues toward the choice of an appropriate solvent and conditions to be employed for the purification of halide-based ILs by means of a liquid-liquid extraction.

Aqueous ionic liquids and their effects on protein structures: an overview on recent theoretical and experimental results

Ionic liquids (ILs) are used in a variety of technological and biological applications. Recent experimental and simulation results reveal the influence of aqueous ionic liquids on the stability of protein and enzyme structures. Depending on different parameters like the concentration and the ion composition, one can observe distinct stabilization or denaturation mechanisms for various ILs. In this review, we summarize the main findings and discuss the implications with regard to molecular theories of solutions and specific ion effects. A preferential binding model is introduced in order to discuss protein-IL effects from a statistical mechanics perspective. The value of the preferential binding coefficient determines the strength of the ion influence and indicates a shift of the chemical equilibrium either to the native or the denatured state of the protein. We highlight the role of water in order to explain the self-association behavior of the IL species and discuss recent experimental and simulation results in the light of the observed binding effects.

An overview of the performance of the COSMO-RS approach in predicting the activity coefficients of molecular solutes in ionic liquids and derived properties at infinite dilution

An overview of performance of state-of-the-art thermodynamic model COSMO-RS in capturing various effects of structure on interactions in ionic liquid binary systems, expressed in terms of limiting activity coefficients of molecular solutes, is presented.

Anion Dependent Dynamics and Water Solubility Explained by Hydrogen Bonding Interactions in Mixtures of Water and Aprotic Heterocyclic Anion Ionic Liquids

Molecular dynamics simulations were used to compare water solubilities and the effects of water on the structure and dynamics of ionic liquids (ILs) composed of phosphonium cations paired with azolide and phenolate anions. The addition of water decreases ordering of the ions compared to the dry ILs with the exception of anion-anion ordering in the phenolate IL. The result is that the dynamics of the azolide ionic liquids increase significantly upon addition of water, whereas the phenolate IL dynamics show little change. The relative water solubilities were compared through calculation of Henry's law constants. Water is much more soluble in the phenolate IL due to strong hydrogen bonding interactions between water and the phenolate oxygen atom. Anions can therefore be selected to control IL-water hydrogen bonding for optimal performance in applications such as CO₂ separation.