Elongation, Alignment, and Guided Electrophoretic Migration of ds-DNA in Flow-Aligned Hexagonal F127 Gels

A review of electrophoretic separations in temperature-responsive Pluronic thermal gels

Gel electrophoresis is a ubiquitous bioanalytical technique used in research laboratories to validate protein and nucleic acid samples. Polyacrylamide and agarose have been the gold standard gel materials for decades, but an alternative class of polymer has emerged with potentially superior performance. Pluronic thermal gels are water-soluble polymers that possess the unique ability to undergo a change in viscosity in response to changing temperature. Thermal gels can reversibly convert between low-viscosity liquids and high-viscosity solid gels using temperature as an adjustable parameter. The properties of thermal gels provide unmatched flexibility as a dynamic separations matrix to measure analytes ranging from small molecules to cells. This review article describes the physical and chemical properties of Pluronic thermal gels to provide a fundamental overview of polymer behavior. The performance of thermal gels is then reviewed to highlight their applications as a gel matrix for electrokinetic separations in capillary, microfluidic, and slab gel formats. The use of dynamic temperature-responsive gels in bioanalytical separations is an underexplored area of research but one that holds exciting potential to achieve performance unattainable with conventional static polymers.

Fluorescence Microscopic Investigations of Molecular Dynamics in Self-Assembled Nanostructures

Many analytical methods employ self-assembled nanostructured materials as chemical recognition media. Molecular permeation through these materials exhibits unique selectivity owing to nanoconfinement-induced enhancement of permeant-nanostructure interactions. This Personal Account introduces our efforts to investigate the detailed dynamics of single or a small number of molecules in nanostructured materials. We developed new experimental and analysis approaches built upon laser-based fluorescence microscopy to measure the detailed translational and orientational dynamics of molecules diffusing in horizontally-oriented, cylindrical nanostructures, including surfactant micelles, silica mesopores, block copolymer microdomains, and bolaamphiphile-based organic nanotubes. Our studies clarified nanoscale details on the structural/chemical heterogeneity of the nanostructures, and their impacts on molecular mass transport dynamics.

Longitudinally Controlled Modification of Cylindrical and Conical Track-Etched Poly(ethylene terephthalate) Pores Using an Electrochemically Assisted Click Reaction

In this study, the longitudinally controlled modification of the inner surfaces of poly(ethylene terephthalate) (PET) track-etched pores was explored using an electrochemically assisted Cu(I)-catalyzed azide-alkyne cycloaddition (CuAAC) click reaction. Cylindrical or conical PET track-etched pores were first decorated with ethynyl groups via the amidation of surface -COOH groups, filled with a solution containing Cu(II) and azide-tagged fluorescent dye, and then sandwiched between comb-shaped and planar gold electrodes. Cu(I) was produced at the comb-shaped working electrode by the reduction of Cu(II); it diffused along the pores toward the other electrode and catalyzed CuAAC between an azide-tagged fluorescent dye and a pore-tethered ethynyl group. The modification efficiency of cylindrical pores (ca. 1 μm in diameter) was assessed from planar and cross-sectional fluorescence microscope images of modified membranes. Planar images showed that pore modification took place only above the teeth of the comb-shaped electrode with a higher reaction yield for longer Cu(II) reduction times. Cross-sectional images revealed micrometer-scale gradient modification along the pore axis, which reflected a Cu(I) concentration profile within the pores, as supported by finite-element computer simulations. The reported approach was applicable to the asymmetric modification of cylindrical pores with two different fluorescent dyes in the opposite directions and also for the selective visualization of the tip and base openings of conical pores (ca. 3.5 μm in base diameter and ca. 1 μm in tip diameter). The method based on electrochemically assisted CuAAC provides a controlled means to fabricate asymmetrically modified nanoporous membranes and, in the future, will be applicable for chemical separations and the development of sequential catalytic reactors.

Single Molecule Catch and Release: Potential-Dependent Plasmid DNA Adsorption along Chemically Graded Electrode Surfaces

Single molecule detection methods were employed to study the potential dependent adsorption and desorption of dye labeled plasmid DNA along chemical gradients prepared on indium tin oxide (ITO) electrodes. Gradients were formed over silica-base-layer-coated ITO surfaces by exposing them in a directional fashion to aminopropyltrimethoxysilane from the vapor phase. Sessile drop water contact angle measurements, spectroscopic ellipsometry, and X-ray photoelectron spectroscopy were used to verify that a gradient was formed and to characterize its wettability, thickness, and composition as a function of position. The gradient-coated ITO electrode served as both the working electrode and a window into the electrochemical cell used to manipulate DNA adsorption. For single molecule studies, the electrochemical cell was filled with buffer solution containing YOYO-1-labeled plasmid DNA. Fluorescence videos acquired along the gradients depicted clear position-, potential-, and pH-dependent variations in DNA adsorption and desorption. The results demonstrate that DNA adsorption was largely independent of applied potential and irreversible at high amine coverage (i.e., multilayers), under pH ∼ 6 buffer. DNA adsorption became more reversible as the amine coverage decreased and the solution pH increased. Potential dependent control over DNA adsorption and desorption was best achieved at monolayer-to-submonolayer aminosilane coverage under pH ∼ 8 buffer. The knowledge gained in these studies will aid in the development of electrochemical methods for the capture and release of DNA and other polyelectrolytes at electrode surfaces.

Molecular Combing of λ-DNA using Self-Propelled Water Droplets on Wettability Gradient Surfaces

Surface wettability gradients were used to elongate and align double stranded λ-DNA. Gradients were prepared by vapor phase deposition of octyltrichlorosilane (C8-silane) and fluorinated octyltrichlorosilane (F-silane) precursors. Gradient formation was confirmed by water contact angle and ellipsometric film thickness measurements. Placement of a droplet of aqueous DNA solution on the hydrophobic end of each gradient led to spontaneous motion of the droplet toward the hydrophilic end and deposition of the DNA. Fluorescence imaging of surface-adsorbed YOYO-1 labeled DNA molecules revealed that they are elongated and aligned perpendicular to the droplet-surface contact line at all positions along the gradient, consistent with a dominant role played by surface tension forces in elongating the DNA. The density of adsorbed DNA was found to be greatest on the C8-silane gradient at its hydrophobic end. DNA density decreased toward the hydrophilic end, while the length of the elongated DNA was less dependent on position. The elongation of DNA molecules by spontaneous droplet motion on chemical gradient surfaces has possible applications in DNA barcoding and studies of DNA-protein interactions.

In-Plane Switching Mode for Liquid Crystal Displays Using a DNA Alignment Layer

We successfully fabricated the in-plane switching mode (IPS) LC display (LCD) based on a double stranded DNA (dsDNA) alignment layer. As widely known, the DNA has the right-handed double helical structure that has naturally grown grooves with a very regular period, which can be used as an alignment layer to control the orientation of liquid crystal (LC) molecules. The LC molecules on this topographical layer of DNA material align obliquely at a specific angle with respect to the direction of DNA chains, providing an instant and convenient tool for the fabrication of the IPS display compared to the conventional ways such as rubbing and mechanical shearing methods. The electro-optical performance and response time of this device were also investigated. Our result will be of great use in further exploration of the electro-optical properties of the other biomaterials.