Spontaneous surface self-assembly in protein-surfactant mixtures: interactions between hydrophobin and ethoxylated polysorbate surfactants

The different adsorption-degradation behaviors of SARS-CoV-2 by bioactive chemicals in wastewater: The suppression kinetics and their implications for wastewater-based epidemiology

Wastewater-Based Epidemiology (WBE) is widely used to monitor the progression of SARS-CoV-2 pandemic. While there is a clear correlation between the number of COVID patients in a sewershed and the viral load in the wastewater, there is notable variability across different treatment plants. In particular, some facilities consistently exhibit higher viral content per diagnosed patient, implying a potential underestimation of the number of COVID patients, while others show a low viral load per diagnosed case, indicating potential attenuation of genetic material from the sewershed. In this study, we investigated the impact of nonylphenol ethoxylate (NPHE), linear alkylbenzene sulfonic acid (LABS), bisoctyl dimethyl ammonium chloride (BDAC), and didecyldimethylammonium chloride (DDAC), the surfactants that have been commonly used as detergents, emulsifiers, wetting agents on the stability of SARS-CoV-2 in wastewater. The results showed multiple and dynamic mechanisms, including degradation and desorption, can occur simultaneously during the interaction between SARS-CoV-2 and different chemicals depending on the physicochemical properties of each chemical. Through the elucidation of the dynamic interactions, the findings from this study could help the state health organizations and scientific community to optimize the SARS-CoV-2 wastewater-based epidemiology strategies.

Experimental techniques to study protein-surfactant interactions: New insights into competitive adsorptions via drop subphase and interface exchange

Protein surfactant (PS) interactions is an essential topic for many fundamental and technological applications such as life science, nanobiotechnology processes, food industry, biodiesel production and drug delivery systems. Several experimental techniques and data analysis approaches have been developed to characterize PS interactions in bulk and at interfaces. However, to evaluate the mechanisms and the level of interactions quantitatively, e.g., PS ratio in complexes, their stability in bulk, and reversibility of their interfacial adsorption, new experimental techniques and protocols are still needed, especially with relevance for in-situ biological conditions. The available standard techniques can provide us with the basic understanding of interactions mainly under static conditions and far from physiological criteria. However, detailed measurements at complex interfaces can be formidable due to the sophisticated tools required to carefully probe nanometric phenomena at interfaces without disturbing the adsorbed layer. Tensiometry-based techniques such as drop profile analysis tensiometry (PAT) have been among the most powerful methods for characterizing protein's and surfactant's adsorption layers at interfaces via measuring equilibrium and dynamic interfacial tension and dilational rheology analysis. PAT provides us with insightful data such as kinetics and isotherms of adsorption and related surface activity parameters. However, the data analysis and interpretation can be challenging for mixed protein-surfactant solutions via standard PAT experimental protocols. The combination of a coaxial double capillary (micro flow exchange system) with drop profile analysis tensiometry (CDC-PAT) is a promising tool to provide valuable results under different competitive adsorption/desorption conditions via novel experimental protocols. CDC-PAT provides unique experimental protocols to exchange the droplet subphase in a continuous dynamic mode during the in-situ analysis of the corresponding interfacial adsorbed layer. The contribution of diffusion/convection mechanisms on the kinetics of the adsorption/desorption processes can also be investigated using CDC-PAT. Here, firstly, we review the commonly available techniques for characterizing protein-surfactant interactions in the bulk phase and at interfaces. Secondly, we give an overview for applications of the coaxial double capillary PAT setup for investigations of mixed protein-surfactant adsorbed layers and address recently developed protocols and analysis procedures. Exploring the competitive sequential adsorption of proteins and surfactants and the reversibility of pre-adsorbed layers via the subphase exchange are the particular experiments we can perform using CDC-PAT. Also the sequential and simultaneous competitive adsorption/desorption processes of some ionic and nonionic surfactants (SDS, CTAB, DTAB, and Triton) and proteins (bovine serum albumin (BSA), lysozyme, and lipase) using CDC-PAT are discussed. Last but not least, the fabrication of micro-nanocomposite layers and membranes are additional applications of CDC-PAT discussed in this work.

Surfactants: physicochemical interactions with biological macromolecules

Macromolecules are essential cellular components in biological systems responsible for performing a large number of functions that are necessary for growth and perseverance of living organisms. Proteins, lipids and carbohydrates are three major classes of biological macromolecules. To predict the structure, function, and behaviour of any cluster of macromolecules, it is necessary to understand the interaction between them and other components through basic principles of chemistry and physics. An important number of macromolecules are present in mixtures with surfactants, where a combination of hydrophobic and electrostatic interactions is responsible for the specific properties of any solution. It has been demonstrated that surfactants can help the formation of helices in some proteins thereby promoting protein structure formation. On the other hand, there is extensive research towards the use of surfactants to solubilize drugs and pharmaceuticals; therefore, it is evident that the interaction between surfactants with macromolecules is important for many applications which includes environmental processes and the pharmaceutical industry. In this review, we describe the properties of different types of surfactants that are relevant for their physicochemical interactions with biological macromolecules, from macromolecules–surfactant complexes to hydrophobic and electrostatic interactions.

Rational design to biologics development: The polysorbates point of view

Formulation development is an essential part of any biopharmaceuticals development programme, and this will affect quality, safety and efficacy of the final drug product. The vast majority of biopharmaceuticals on the market are therapeutic proteins; however, these are less stable compared to conventional pharmaceuticals. To counter aggregation, denaturation and surface adsorption of proteins in solution, surfactants are added to the formulations; however, the choice of the best formulation is a challenge that is faced during formulation development. Polysorbates are the most widely used surfactants in the pharmaceutical industry and are presented in >80% of commercial monoclonal antibody formulations. In this review, we provide a general overview of polysorbates and their issues, and the characteristics that have to be taken into account during formulation development. Degradation of polysorbates, namely by hydrolysis and/or oxidation, is one of the main concerns associated with their use. Furthermore, degradation of polysorbates is determined by formulation composition, pH and storage conditions, therefore underlining the importance and complexity of protein formulation development using polysorbates. A need-based approach should be used for correct selection of excipients in protein formulations that contain polysorbates.

Adsorption properties of plant based bio-surfactants: Insights from neutron scattering techniques

There is an increasing interest in biosustainable surfactants and surface active proteins for a range of applications, in home and personal care products, cosmetics, pharmaceuticals, and food and drink formulations. This review focuses on two plant derived biosurfactants, the surface active glycoside, saponin, and the surface active globular protein, hydrophobin. A particular emphasis in the review is on the role of neutron reflectivity in probing the adsorption, structure of the adsorbed layer, and their mixing at the interface with a range of more conventional surfactants and proteins.

Multilayers formed by polyelectrolyte-surfactant and related mixtures at the air-water interface

The structure and occurrence of multilayered adsorption at the air-water interface of surfactants in combination with other oppositely charged species is reviewed. The main species that trigger multilayer formation are multiply charged metal, oligo- and polyions. The structures vary from the attachment of one or two more or less complete surfactant bilayers to the initial surfactant monolayer at the air-water interface to the attachment of a greater number of bilayers with a more defective structure. The majority of the wide range of observations of such structures have been made using neutron reflectometry. The possible mechanisms for the attraction of surfactant bilayers to an air-water interface are discussed and particular attention is given to the question of whether these structures are true equilibrium structures.

Interfacial properties of lipid sponge-like nanoparticles and the role of stabilizer on particle structure and surface interactions

The advantage of using nonlamellar lipid liquid crystalline phases has been demonstrated in many applications, such as drug delivery, protein encapsulation and crystallisation. We have recently reported that a mixture of mono- and diglycerides is able to form sponge-like nanoparticles (L3-NPs) with large enough aqueous pores to encapsulate macromolecules such as proteins. Here we use small angle neutron scattering (SANS) to reveal morphology, structural and chemical composition of these polysorbate 80 (P80) stabilized sponge phase nanoparticles, not previously known. Our results suggest that L3-NPs have a core-shell sphere structure, with a shell rich in P80. It was also found that even if P80 is mostly located on the surface, it also contributes to the formation of the inner sponge phase structure. An important aspect for the application and colloidal stability of these particles is their interfacial properties. Therefore, the interfacial behaviour of the nanoparticles on hydrophilic silica was revealed by Quartz crystal microbalance with dissipation (QCM-D) and neutron reflectivity (NR). Adsorption experiments reveal the formation of a thin lipid layer, with the dimension corresponding to a lipid bilayer after L3-NPs are in contact with hydrophilic silica. This suggests that the diglycerol monoleate/Capmul GMO-50/P80 particles reorganize themselves on this surface, probably due to interactions between P80 head group and SiO2.

Antibody adsorption on the surface of water studied by neutron reflection

Surface and interfacial adsorption of antibody molecules could cause structural unfolding and desorbed molecules could trigger solution aggregation, resulting in the compromise of physical stability. Although antibody adsorption is important and its relevance to many mechanistic processes has been proposed, few techniques can offer direct structural information about antibody adsorption under different conditions. The main aim of this study was to demonstrate the power of neutron reflection to unravel the amount and structural conformation of the adsorbed antibody layers at the air/water interface with and without surfactant, using a monoclonal antibody 'COE-3' as the model. By selecting isotopic contrasts from different ratios of H₂O and D₂O, the adsorbed amount, thickness and extent of the immersion of the antibody layer could be determined unambiguously. Upon mixing with the commonly-used non-ionic surfactant Polysorbate 80 (Tween 80), the surfactant in the mixed layer could be distinguished from antibody by using both hydrogenated and deuterated surfactants. Neutron reflection measurements from the co-adsorbed layers in null reflecting water revealed that, although the surfactant started to remove antibody from the surface at 1/100 critical micelle concentration (CMC) of the surfactant, complete removal was not achieved until above 1/10 CMC. The neutron study also revealed that antibody molecules retained their globular structure when either adsorbed by themselves or co-adsorbed with the surfactant under the conditions studied.

Recent Advances in Fungal Hydrophobin Towards Using in Industry

Fungal hydrophobin is a family of low molecular weight proteins consisting of four disulfide bridges and an extraordinary hydrophobic patch. The hydrophobic patch of hydrophobins and the molecules of gaseous CO2 may interact together and form the stable CO2-nanobubbles covered by an elastic membrane in carbonated beverages. The nanobubbles provide the required energy to provoke primary gushing. Due to the hydrophobicity of hydrophobin, this protein is used as a biosurfactant, foaming agent or encapsulating agent in food products and medicine formulations. Increasing demands for using of hydrophobins led to a challenge regarding production and purification of this product. However, the main issue to use hydrophobin in the industry is the regulatory affairs: yet there is no approved legislation for using hydrophobin in food and beverages. To comply with the legislation, establishing a consistent method for obtaining pure hydrophobins is necessary. Currently, few research teams in Europe are focusing on different aspects of hydrophobins. In this paper, an up-to-date collection of highlights from those special groups about the bio-chemical and physicochemical characteristics of hydrophobins have been studied. The recent advances of those groups concerning the production and purification, positive applications and negative function of hydrophobin are also summarised.

Adsorption of Hydrophobin-Protein Mixtures at the Air-Water Interface: The Impact of pH and Electrolyte

The adsorption of the proteins β-casein, β-lactoglobulin, and hydrophobin, and the protein mixtures of β-casein/hydrophobin and β-lactoglobulin/hydrophobin have been studied at the air-water interface by neutron reflectivity, NR. Changing the solution pH from 7 to 2.6 has relatively little impact on the adsorption of hydrophobin or β-lactoglobulin, but results in a substantial change in the structure of the adsorbed layer of β-casein. In β-lactoglobulin/hydrophobin mixtures, the adsorption is dominated by the hydrophobin adsorption, and is independent of the hydrophobin or β-lactoglobulin concentration and solution pH. At pH 2.6, the adsorption of the β-casein/hydrophobin mixtures is dominated by the hydrophobin adsorption over the range of β-casein concentrations studied. At pH 4 and 7, the adsorption of β-casein/hydrophobin mixtures is dominated by the hydrophobin adsorption at low β-casein concentrations. At higher β-casein concentrations, β-casein is adsorbed onto the surface monolayer of hydrophobin, and some interpenetration between the two proteins occurs. These results illustrate the importance of pH on the intermolecular interactions between the two proteins at the interface. This is further confirmed by the impact of PBS, phosphate buffered saline, buffer and CaCl2 on the coadsorption and surface structure. The results provide an important insight into the adsorption properties of protein mixtures and their application in foam and emulsion stabilization.

Multilayering of Surfactant Systems at the Air-Dilute Aqueous Solution Interface

In the last 15 years there have been a number of observations of surfactants adsorbed at the air-water interface with structures more complicated than the expected single monolayer. These observations, mostly made by neutron or X-ray reflectivity, show structures varying from the usual monolayer to monolayer plus one or two additional bilayers to multilayer adsorption at the surface. These observations have been assembled in this article with a view to finding some common features between the very different systems and to relating them to aspects of the bulk solution phase behavior. It is argued that multilayering is primarily associated with wetting or prewetting of the air-water interface by phases in the bulk system, whose structures depend on an overall attractive force between the constituent units. Two such phases, whose formation is assumed to be partially driven by strong specific ion binding, are a concentrated lamellar phase that forms at low concentrations and a swollen lamellar phase that is not space-filling. Multilayering phenomena at the air-water interface then offer a delicate and easy means of studying the finer details of the incompletely understood attraction that leads to these two phases, as well as an interesting new means of self-assembling surface structures. In addition, multilayering is often associated with unusual wetting characteristics. Examples of systems discussed, and in some cases their bulk phase behavior, include surfactants with multivalent metal counterions, surfactants with oligomers and polymers, surfactant with hydrophobin, dichain surfactants, lung surfactant, and the unusual system of ethanolamine and stearic acid. Two situations where the air-water surface is deliberately held out of equilibrium are also assessed for features in common with the steady-state/equilibrium observations.

Adsorption at air-water and oil-water interfaces and self-assembly in aqueous solution of ethoxylated polysorbate nonionic surfactants

The Tween nonionic surfactants are ethoxylated sorbitan esters, which have 20 ethylene oxide groups attached to the sorbitan headgroup and a single alkyl chain, lauryl, palmityl, stearyl, or oleyl. They are an important class of surfactants that are extensively used in emulsion and foam stabilization and in applications associated with foods, cosmetics and pharmaceuticals. A range of ethoxylated polysorbate surfactants, with differing degrees of ethoxylation from 3 to 50 ethylene oxide groups, have been synthesized and characterized by neutron reflection, small-angle neutron scattering, and surface tension. In conjunction with different alkyl chain groups, this provides the opportunity to modify their surface properties, their self-assembly in solution, and their interaction with macromolecules, such as proteins. Adsorption at the air-water and oil-water interfaces and solution self-assembly of the range of ethoxylated polysorbate surfactants synthesized are presented and discussed.

Structural effects of the dispersing agent polysorbate 80 on liquid crystalline nanoparticles of soy phosphatidylcholine and glycerol dioleate

Well-defined, stable and highly structured I2 (Fd3̅m) liquid crystalline nanoparticles (LCNP) of 50/50 (wt/wt) soy phosphatidylcholine (SPC)/glycerol dioleate (GDO), can be formed by using a low fraction (5-10 wt%) of the dispersing polymeric surfactant polyoxyethylene (20) sorbitan monooleate (polysorbate 80 or P80). In the present study we used small angle neutron scattering (SANS) and deuterated P80 (d-P80) to determine the location and concentration of P80 within the LCNP and small angle X-ray scattering (SAXS) to reveal the internal structure. SANS data suggests that some d-P80 already penetrates the particle core at 5%. However, the content of d-P80 is still low enough not to significantly change the internal Fd3̅m structure of the LCNP. At higher fractions of P80 a phase separation occurs, in which a SPC and P80 rich phase is formed at the particle surface. The surface layer becomes gradually richer in both solvent and d-P80 when the surfactant concentration is increased from 5 to 15%, while the core of the particle is enriched by GDO, resulting in loss of internal structure and reduced hydration. We have used neutron reflectometry to reveal the location of the stabiliser within the adsorbed layer on an anionic silica and cationic (aminopropyltriethoxysilane (APTES) silanized) surface. d-P80 is enriched closest to the supporting surface and slightly more so for the cationic APTES surface. The results are relevant not only for the capability of LCNPs as drug delivery vehicles but also as means of preparing functional surface coatings.

Applications of hydrophobins: current state and perspectives

Hydrophobins are proteins exclusively produced by filamentous fungi. They self-assemble at hydrophilic-hydrophobic interfaces into an amphipathic film. This protein film renders hydrophobic surfaces of gas bubbles, liquids, or solid materials wettable, while hydrophilic surfaces can be turned hydrophobic. These properties, among others, make hydrophobins of interest for medical and technical applications. For instance, hydrophobins can be used to disperse hydrophobic materials; to stabilize foam in food products; and to immobilize enzymes, peptides, antibodies, cells, and anorganic molecules on surfaces. At the same time, they may be used to prevent binding of molecules. Furthermore, hydrophobins have therapeutic value as immunomodulators and can been used to produce recombinant proteins.

Impact of the degree of ethoxylation of the ethoxylated polysorbate nonionic surfactant on the surface self-assembly of hydrophobin-ethoxylated polysorbate surfactant mixtures

Neutron reflectivity measurements have been used to study the surface adsorption of the polyethylene sorbitan monostearate surfactant, with degrees of ethoxylation varying from 3 to 20 ethylene oxide groups, with the globular protein hydrophobin. The surface interaction between the ethoxylated polysorbate nonionic surfactants and the hydrophobin results in self-assembly at the air-solution interface in the form of a well-defined layered surface structure. The surface interaction arises from a combination of the hydrophobic interaction between the surfactant alkyl chain and the hydrophobic patch on the surface of the hydrophobin, and the hydrophilic interaction between the ethoxylated sorbitan headgroup and the hydrophilic regions on the surface of the hydrophobin. The results presented show that varying the degree of ethoxylation of the polysorbate surfactant changes the interaction between the surfactant and the hydrophobin and the packing, and hence the evolution in the resulting surface structure. The optimal degree of ethoxylation for multilayer formation is over a broad range, from of order 6 to 17 ethylene oxide groups, and for degrees of ethoxylation of 3 and 20 only monolayer adsorption of either the surfactant or the hydrophobin is observed.