Sum Frequency Generation Spectroscopy Study of an Ionic Liquid at a Graphene-BaF2 (111) Interface

Vacuum Interfacial Structure and X-ray Reflectivity of Imidazolium-Based Ionic Liquids with Perfluorinated Anions from a Theory and Simulations Perspective

We report studies of the vacuum interfacial structure of a series of 1-methyl-3-alkylimidazolium bis(perfluoroalkanesulfonyl)imide ionic liquids (ILs) and predict and explain their Fresnel-normalized X-ray reflectivity. To better interpret the results, we use a theory we recently developed dubbed "the peaks and antipeaks analysis of reflectivity" which splits the overall signal into that of different pair subcomponents. Whereas the overall reflectivity signal is not very informative, the peak and trough intensities for the pair subcomponents provide rich information for analysis. When species containing cationic alkyl or anionic fluoroalkyl tails are present at the interface, a tail layer is found next to a vacuum, and this tail layer can be composed of both alkyl and fluoroalkyl moieties. To maintain the positive-negative alternation of charged groups, alkyl and fluoroalkyl tails must necessarily be nearby and cannot segregate. Charged groups are found in the subsequent layer just below the interface and arranged to achieve lateral charge neutrality. In general, fluctuations at and away from the interface are based on polarity (i.e., heads and tails) and not on charge; when there are no significant alkyl or fluoroalkyl moieties in the IL, atomic density fluctuations away from the interface are small and appear to exist for the purpose of achieving lateral charge balance. For all the systems reported here, the persistence length of density fluctuations does not go beyond ∼7 nm.

Effect of Ion Pair on Contact Angle for Phosphonium Ionic Liquids

The wettability of ionic liquids (ILs) is relevant to their use in various applications. However, a mechanistic understanding of how the cation-anion pair affects wettability is still evolving. Here, focusing on phosphonium ILs, wettability was characterized in terms of contact angle using experiments and classical molecular dynamics simulations. Both experiments and simulations showed that the contact angle was affected by the anion and increased as benzoate < salicylate < saccharinate. Further, the simulations showed that the contact angle decreased with increasing cation alkyl chain length for these anions paired with five different tetra-alkyl-phosphonium cations. The trends were explained in terms of adhesive and cohesive energies in the simulations and then correlated to the atomic scale differences between the anions and the cations.

Investigation of Multilayered Structures of Ionic Liquids on Graphite and Platinum Using Atomic Force Microscopy and Molecular Simulations

The molecular-level orientation and structure of ionic liquids (ILs) at liquid-solid interfaces are significantly different than in the bulk. The interfacial ordering influences both IL properties, such as dielectric constants and viscosity, and their efficacy in devices, such as fuel cells and electrical capacitors. Here, we report the layered structures of four ILs on unbiased, highly ordered pyrolytic graphite (HOPG) and Pt(111) surfaces, as determined by atomic force microscopy. The ILs investigated are 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([emim][Tf₂N]), 1-ethyl-3-methylimidazolium perfluorobutylsulfonate ([emim][C₄F₉SO₃]), 7-methyl-1,5,7-triazabicyclo[4.4.0]dec-5-ene bis(trifluoromethylsulfonyl)imide ([MTBD][Tf₂N]), and 7-methyl-1,5,7-triazabicyclo[4.4.0]dec-5-ene perfluorobutylsulfonate ([MTBD][C₄F₉SO₃]). Molecular dynamics simulations provide complementary information on the position and orientation of the ions. These ILs form a cation layer at the IL-solid interface, followed by a layer of anions. [Emim]⁺ and [MTBD]⁺ have similar orientations at the surface, but [MTBD]⁺ forms a thinner layer compared to [emim]⁺ on both HOPG and Pt(111). In addition, [Tf₂N]^- shows stronger interactions with Pt(111) surfaces than [C₄F₉SO₃]^-.

Insights into Ionic Liquids: From Z-Bonds to Quasi-Liquids

Ionic liquids (ILs) hold great promise in the fields of green chemistry, environmental science, and sustainable technology due to their unique properties, such as a tailorable structure, the various types available, and their environmentally friendly features. On the basis of multiscale simulations and experimental characterizations, two unique features of ILs are as follows: (1) strong coupling interactions between the electrostatic forces and hydrogen bonds, namely in the Z-bond, and (2) the unique semiordered structure and properties of ultrathin films, specifically regarding the quasi-liquid. In accordance with the aforementioned theoretical findings, many cutting-edge applications have been proposed: for example, CO₂ capture and conversion, biomass conversion and utilization, and energy storage materials. Although substantial progress has been made recently in the field of ILs, considerable challenges remain in understanding the nature of and devising applications for ILs, especially in terms of e.g. in situ/real-time observation and highly precise multiscale simulations of the Z-bond and quasi-liquid. In this Perspective, we review recent developments and challenges for the IL research community and provide insights into the nature and function of ILs, which will facilitate future applications.

Screening of hydrogen bonding interactions by a single layer graphene

A single layer of graphene when transferred to a solid substrate has the ability to screen or transmit interactions from the underlying substrate, which has direct consequences in applications of this 2D material to flexible electronics and sensors. Previous reports using a multitude of techniques present contradictory views on graphene's ability to screen or transmit van der Waals (vdW) and polar interactions. In the present study, we use interface-sensitive spectroscopy to demonstrate that a single layer graphene is opaque to hydrogen bonding interactions (a subset of acid-base interactions), answering a question that has remained unresolved for a decade. Similar frequency shifts of sapphire hydroxyl (OH) peak for graphene-coated sapphire in contact with air and polydimethylsiloxane (PDMS) demonstrate the insensitivity of sapphire OH to PDMS. The screening ability of graphene is also evident in the smaller magnitude of this frequency shift for graphene-coated sapphire in comparison to that for bare sapphire. The screening of acid-base interactions by a single layer graphene results in the significant reduction of adhesion hysteresis for PDMS lens on graphene-coated substrates (sapphire and silicon wafer, SiO₂/Si) than bare substrates. Our results have implications in the use of PDMS stamps to transfer graphene to other substrates eliminating the need for a wet-transfer process.

Imaging the reactivity and width of graphene's boundary region

The reactivity of graphene at its boundary region has been imaged using non-linear spectroscopy to address the controversy whether the terraces of graphene or its edges are more reactive. Graphene was functionalised with phenyl groups, and we subsequently scanned our vibrational sum-frequency generation setup from the functionalised graphene terraces across the edges. A greater phenyl signal is clearly observed at the edges, showing evidence of increased reactivity in the boundary region. We estimate an upper limit of 1 mm for the width of the CVD graphene boundary region.

Graphene Meets Ionic Liquids: Fermi Level Engineering via Electrostatic Forces

Graphene-based two-dimensional (2D) materials are promising candidates for a number of different energy applications. A particularly interesting one is in next generation supercapacitors, where graphene is being explored as an electrode material in combination with room temperature ionic liquids (ILs) as electrolytes. Because the amount of energy that can be stored in such supercapacitors critically depends on the electrode-electrolyte interface, there is considerable interest in understanding the structure and properties of the graphene/IL interface. Here, we report the changes in the properties of graphene upon adsorption of a homologous series of alkyl imidazolium tetrafluoroborate ILs using a combination of experimental and theoretical tools. Raman spectroscopy reveals that these ILs cause n-type doping of graphene, and the magnitude of doping increases with increasing cation chain length despite the expected decrease in the density of surface-adsorbed ions. Molecular modeling simulations show that doping originates from the changes in the electrostatic potential at the graphene/IL interface. The findings described here represent an important step in developing a comprehensive understanding of the graphene/IL interface.

Successive Surface Reactions on Hydrophilic Silica for Modified Magnetic Nanoparticle Attachment Probed by Sum-Frequency Generation Spectroscopy

Successive surface reactions on hydrophilic silica substrates were designed and performed to immobilize ethanolamine-modified magnetic ferrite-based nanoparticle (NP) for surface characterization. The various surfaces were monitored using sum-frequency generation (SFG) spectroscopy. The surface of the hydrophilic quartz substrate was first converted to a vinyl-terminated surface by utilizing a silanization reaction, and then, the surface functional groups were converted to carboxylic-terminated groups via a thiol-ene reaction. The appearance and disappearance of the vinyl (═CH₂) peak at ∼2990 cm^-1 in the SFG spectra were examined to confirm the success of the silanization and thiol-ene reactions, respectively. Acyl chloride (-COCl) formation from carboxy (-COOH) functional group was then performed for further attachment of magnetic amine-functionalized magnesium ferrite nanoparticles (NPs) via amide bond formation. The scattered NPs attached on the modified silica substrate was then used to study the changes in the spectral profile of the ethanolamine modifier of the NPs for in situ lead(II) (Pb²⁺) adsorption at the solid-liquid interface using SFG spectroscopy. However, due to the limited number of NPs attached and sensitivity of SFG spectroscopy toward expected change in the modifier spectroscopically, no significant change was observed in the SFG spectrum of the modified silica with magnetic NPs during exposure to Pb²⁺ solution. Nevertheless, SFG spectroscopy as a surface technique successfully monitored the modifications from a clean fused substrate to -COCl formation that was used to immobilize the decorated magnetic nanoparticles. The method developed in this study can provide a reference for many surface or interfacial studies important for selective attachment of adsorbed organic or inorganic materials or particles.

Interactions of ionic liquids and surfaces of graphene related nanoparticles under high pressures

High-pressure infrared spectroscopy was used to study the interactions between 1-methyl-3-propylimidazolium iodide [MPIM]I and graphene-based nanoparticles. The results obtained at ambient pressure indicate the imidazolium ring of the cation to be a more favorable moiety for adsorption than alkyl C-H groups at ambient pressure. Upon increasing the pressure, the dominant C²-H band of pure [MPIM]I yields a significant red frequency shift. As the mixtures, i.e., graphene oxide (GO)/[MPIM]I, reduced graphene oxide (RGO)/[MPIM]I, and graphene (G)/[MPIM]I, were compressed, mild shifts in the C²-H absorption frequency were observed. The absence of drastic red-shifts suggests that the local C²-H structures may be perturbed by the addition of GO, RGO, and G under high pressures. When pure [MPIM]I was compressed from ambient to 0.4 GPa, the alkyl C-H band at ca. 2964 cm^-1 was blue-shifted to 2984 cm^-1. This discontinuous jump occurring around 0.4 GPa becomes less obvious for the mixtures GO/[MPIM]I, RGO/[MPIM]I, and G/[MPIM]I. The results of this study suggest that the addition of GO, RGO, and G can disturb the local structures of alkyl C-H under high pressures, demonstrating that high pressures may have the potential to tune the strength of ionic liquid-surface interactions and the performance of energy storage devices (e.g. supercapacitors).

Interfacial Nanostructure and Asymmetric Electrowetting of Ionic Liquids

In this work, the interfacial nanostructure and electrowetting of ionic liquids having the same 1-ethyl-3-methylimidazolium cation ([EMIm]⁺) but different anions such as bis(trifluoromethylsulfonyl)imide (TFSI^-), trifluoromethylsulfonate (TfO^-), methylsulfonate (OMs^-), acetate (OAc^-), bis(fluorosulfonyl)imide (FSI^-), dicyanamide (DCA^-), and tris(pentafluorethyl)trifluorphosphat (FAP^-) on bare metallic electrodes were investigated. In the investigated voltammetric potential regime, the contact angle versus voltage curve is asymmetric with respect to surface polarity. The electrowetting of the ILs occurs at negative potentials but does not occur at positive potentials. In situ atomic force microscopy (AFM) shows that the IL adopts a multilayered structure at the solid/IL interface, and a cation-rich layer is present in the innermost layer during cathodic polarization. The cations can change their orientation and propagate ahead of the three-phase contact line by diffusion, leading to further spreading on the negatively charged surface. The formation of such a surface layer is also evidenced by X-ray photoelectron spectroscopy. Such a surface diffusion mechanism does not occur during anodic polarization, where anions are enriched. In addition, the influence of substrate, water, and dissolved zinc salts on the electrowetting of ILs was studied. Our findings provide valuable insights for the interfacial nanostructure and the electrowetting of ILs.

π+–π+ stacking of imidazolium cations enhances molecular layering of room temperature ionic liquids at their interfaces

The interfacial structure of room temperature ionic liquids (RTILs) is governed by the competing effects of the randomization due to the molecular polarizability and the ordered structure stabilized by π⁺–π⁺ interactions between the cationic molecules of RTILs.

Molecular origin of high free energy barriers for alkali metal ion transfer through ionic liquid–graphene electrode interfaces

We study mechanisms of solvent-mediated ion interactions with charged surfaces in ionic liquids by molecular dynamics simulations, in an attempt to reveal the main trends that determine ion–electrode interactions in ionic liquids.