Oxidation of Reduced Sulfur Species: Carbon Disulfide

A Soluble Porous Coordination Polymer for Fluorescence Sensing of Explosives and Toxic Anions under Homogeneous Environment

In the past decades, porous coordination polymers (PCPs) based fluorescent (FL) sensors have received intense attention due to their promising applications. In this work, a soluble Zn-PCP is presented as a sensitive probe towards explosive molecules, chromate, and dichromate ions. In former reports, PCP sensors were usually ground into fine powders and then dispersed in solvents to form FL emulsion for sensing applications. However, their insoluble characters would cause the sensing accuracy which is prone to interference from environmental effects. While in this work, the as-made PCP could be directly soluble in organic solvents to form a clear solution with bright blue emission, representing the first soluble PCP based fluorescence sensor to probe explosive molecules under a homogeneous environment. Moreover, the FL PCP solution also shows sensitive detection behaviors towards the toxic anions of CrO42- and Cr2O72-, which exhibit a good linear relationship between the fluorescence intensity of Zn-PCP and the concentrations of both analytes. This work provides a reference for designing task-specific PCP sensors utilized under a homogeneous environment.

Determination of thiram residues in fresh water using flow injection diperiodatonickelate(IV)-quinine chemiluminescence detection

This study developed a simple flow injection (FI) method based on diperiodatonickelate(IV)-sulfuric acid reaction using chemiluminescence (CL) detection for the determination of thiram (THI) fungicide in fresh water using quinine as the sensitizer. The possible mechanism of the CL reaction was described using UV-Vis. absorption and CL spectra. Experimental variables were optimized by applying a univariate approach, and a linear calibration curve was obtained in the range of 1.0 × 10^-3 -2.0 mg L^-1 (R²  = 0.9994, n = 9) with a limit of detection of 5.0 × 10^-4  mg L^-1 (S/N = 3) and an injection throughput of 200 h^-1 . This approach was successfully applied to determine THI in fresh water by using solid-phase extraction and achieved a good recovery rate of 94%-110% with a relative standard deviation of 1.9%-3.7% (n = 4). The results obtained were compared with the reported FI-CL and high-performance liquid chromatography-ultraviolet methods, and the three methods did not differ significantly at the 95% confidence limit.

Investigating role of abiotic side and finding optimum abiotic condition for improving gas biodesulfurization using Thioalkalivibrio versutus

Hydrogen sulfide (H₂S) is a super toxic substance that produces SO_x gases when combusted. Therefore, it should be removed from gas streams. Biodesulfurization is one of the developing methods for removing sulfide. Gas biodesulfurization must be accelerated to be competitive with chemical processes. This process has two sides: biotic and abiotic sides. To increase the rate of sulfide removal, this substance should be given to the bacteria in the maximum amount (Max. − R_{HS B}). Therefore, it is necessary to minimize the rate of adverse abiotic reactions of sulfide (Min. − R_{HS A}). Minimizing the sulfide reaction with biosulfur and oxygen and thiosulfate generation (Min. − R_{HS thio2}) was assessed in de-microbized medium. It was concluded that the pH should be kept as low as possible. The kinetics of thiosulfate formation from sulfide oxidation (− R_{HS thio1}) are strongly dependent on the sulfide concentration, and to minimize this reaction rate, sulfide should be gently injected into the culture. To minimize sulfide reduction to hydrogen sulfide (Min. − R_{HS rev}), the pH should be kept as high as possible. Using the Design Expert v.13, a model was driven for the abiotic side to obtain optimum condition. The pH value was found to be 8.2 and the sulfide concentration to 2.5E−05 M. Thioalkalivibrio versutus cultivation under identified abiotic conditions resulted in biological removal of sulfide up to 1.5 g/h. The culture was not able to remove 2 g/h input sulfide, and to increase this, the biotic side should be studied.

A machine-learning reduced kinetic model for H2S thermal conversion process

H2S is becoming more and more appealing as a source for hydrogen and syngas generation. Its hydrogen production potential is studied by several research groups by means of catalytic and thermal conversions. While the characterization of catalytic processes is strictly dependent on the catalyst adopted and difficult to be generalized, the characterization of thermal processes can be brought back to wide-range validity kinetic models thanks to their homogeneous reaction environments. The present paper is aimed at providing a reduced kinetic scheme for reliable thermal conversion of H2S molecule in pyrolysis and partial oxidation thermal processes. The proposed model consists of 10 reactions and 12 molecular species. Its validation is performed by numerical comparisons with a detailed kinetic model already validated by literature/industrial data at the operating conditions of interest. The validated reduced model could be easily adopted in commercial process simulators for the flow sheeting of H2S conversion processes.

Fluorescent Detection of Carbon Disulfide by a Highly Emissive and Robust Isoreticular Series of Zr-Based Luminescent Metal Organic Frameworks (LMOFs)

Carbon disulfide (CS2) is a highly volatile neurotoxic species. It is known to cause atherosclerosis and coronary artery disease and contributes significantly to sulfur-based pollutants. Therefore, effective detection and capture of carbon disulfide represents an important aspect of research efforts for the protection of human and environmental health. In this study, we report the synthesis and characterization of two strongly luminescent and robust isoreticular metal organic frameworks (MOFs) Zr6(µ3-O)4(OH)8(tcbpe)2(H2O)4 (here termed 1) and Zr6(µ3-O)4(OH)8(tcbpe-f)2(H2O)4 (here termed 2) and their use as fluorescent sensors for the detection of carbon disulfide. Both MOFs demonstrate a calorimetric bathochromic shift in the optical bandgap and strong luminescence quenching upon exposure to carbon disulfide. The interactions between carbon disulfide and the frameworks are analyzed by in-situ infrared spectroscopy and computational modelling by density functional theory. These results reveal that both the Zr metal node and organic ligand act as the preferential binding sites and interact strongly with carbon disulfide.

Temperature and Pressure Dependence of the Reaction S + CS (+M) → CS2 (+M)

Experimental data for the unimolecular decomposition of CS2 from the literature are analyzed by unimolecular rate theory with the goal of obtaining rate constants for the reverse reaction S + CS (+M) → CS2 (+M) over wide temperature and pressure ranges. The results constitute an important input for the kinetic modeling of CS2 oxidation. CS2 dissociation proceeds as a spin-forbidden process whose detailed properties are still not well understood. The role of the singlet-triplet transition involved is discussed.