Spatiotemporal control of synergistic gel disintegration consisting of boroxole- and glyco-based polymers via photoinduced proton transfer

The Rise of Boron-Containing Compounds: Advancements in Synthesis, Medicinal Chemistry, and Emerging Pharmacology

Boron-containing compounds (BCC) have emerged as important pharmacophores. To date, five BCC drugs (including boronic acids and boroles) have been approved by the FDA for the treatment of cancer, infections, and atopic dermatitis, while some natural BCC are included in dietary supplements. Boron's Lewis acidity facilitates a mechanism of action via formation of reversible covalent bonds within the active site of target proteins. Boron has also been employed in the development of fluorophores, such as BODIPY for imaging, and in carboranes that are potential neutron capture therapy agents as well as novel agents in diagnostics and therapy. The utility of natural and synthetic BCC has become multifaceted, and the breadth of their applications continues to expand. This review covers the many uses and targets of boron in medicinal chemistry.

Fabrication of Cationic Poly(vinyl alcohol) Films Cross-Linked Using Copolymers Containing Quaternary Ammonium Cations, Benzoxaborole, and Carboxy Groups

Water-insoluble cationic poly(vinyl alcohol) (PVA) films were fabricated using a mixed aqueous solution of PVA and poly([2-(methacryloyloxy)ethyl]trimethylammonium chloride (METAC)-co-methacrylic acid (MAAc)-co-5-methacrylamido-1,2-benzoxaborole (MAAmBO)) copolymer (3D). The surface of the PVA film is typically negatively charged, and simple fabrication methods for water-insoluble PVA films with cationic surface charges are required to expand their application fields. METAC, which has a permanent positive charge owing to the presence of a quaternary ammonium cation, was selected as the cationic unit. The MAAc and MAAmBO units were used as two types of cross-linking structures for the thermal cross-linking of the hydroxy and carboxy groups of the MAAc unit (covalent bonding) as well as the diol and benzoxaborole groups of the MAAmBO unit (dynamic covalent bonding). The films were thermally cross-linked at 135 °C for 4 h without the addition of materials. After immersion in surplus water at 80 °C for 3 h, the cross-linked PVA/3D films retained almost 100% of their weights. The ζ-potential of the water-insoluble PVA/3D film was 9.4 ± 0.8 mV. The PVA/3D film was strongly dyed using anionic acid red 1 (AR1) because of its positively charged surface. Interestingly, it could also be slightly dyed using cationic methylene blue (MB) and became transparent (original state) after immersion in water for 2 days. These results suggested that positive and negative charges coexisted in the PVA/3D film, and the surface properties were positively inclined. Moreover, the degree of hemolysis of the PVA/3D films was similar to that of the negative control, which showed high blood compatibility. To our knowledge, this is the first report on the fabrication of water-insoluble cationic PVA films using two types of cross-linking structures containing carboxy and benzoxaborole groups. The cross-linked PVA films were analyzed using Fourier transform infrared (FT-IR) spectroscopy, differential scanning calorimetry (DSC), and contact angle (CA) and ζ-potential measurement, as well as by determining the mechanical properties, adsorption of charged molecules, and biocompatibility. These readily fabricated water-insoluble PVA films with positive charges can show potential applications in sensors, adsorption systems, and antimicrobial materials.

Osmotic squat actuation in stiffness adjustable bacterial cellulose composite hydrogels

Stimuli-responsive stiffness change and squat actuation were realized in bacterial cellulose hydrogels by utilizing internal osmotic pressure changes.

Preparation of cross-linked poly(vinyl alcohol) films from copolymers with benzoxaborole and carboxylic acid groups, and their degradability in an oxidizing environment

Functionalized PVA films were prepared from copolymers with benzoxaborole and carboxyl groups.

Self-crosslinking smart hydrogels through direct complexation between benzoxaborole derivatives and diols from hyaluronic acid

By tailoring the structure of benzoxaborole (BOR), self-crosslinking hydrogels based on hyaluronic acid (HA) modified with BOR derivatives are obtained for the first time through the direct BOR-HA diol complexation at physiological pH.

Dynamic-Covalent Hydrogel with NIR-Triggered Drug Delivery for Localized Chemo-Photothermal Combination Therapy

Near-infrared (NIR) light-responsive, injectable hydrogels are among the most promising drug delivery systems for localized anticancer therapy owing to its minimally invasive administration and remote-controlled manner. However, most currently reported NIR-responsive hydrogels were usually generated through physical mixing of thermosensitive polymers and photothermal conversion agents. In this study, a novel type of dynamic-covalent hydrogel (GelPV-DOX-DBNP) with NIR light-triggered drug release behavior was rationally designed for chemo-photothermal combination treatment of tumors. Concretely, this NIR-responsive hydrogel was formed by specific benzoxaborole-carbohydrate interactions between benzoxaborole (BOB)-modified hyaluronic acid (BOB-HA) and fructose-based glycopolymer (PolyFru), where photosensitizer perylene diimide zwitterionic polymer (PDS), reductant ascorbic acid (Vc), anticancer drug doxorubicin (DOX) as well as photothermal nanoparticles (DB-NPs) were encapsulated, simultaneously. Upon 660 nm light irradiation, both PDS and Vc within the designed hydrogel can convert oxygen into hydrogen peroxide, which could make hydrogel be degraded through the breakage of dynamic covalent bonds based on benzoxaborole-carbohydrate interactions, leading to NIR light-activatable release of DOX and DB-NPs from GelPV-DOX-DBNP. Furthermore, the released DB-NPs can convert 915 nm light irradiation into heat, enabling the application of GelPV-DOX-DBNP as a NIR-responsive drug delivery platform for both chemotherapy and photothermal therapy (PTT). In vivo results prove that GelPV-DOX-DBNP exhibited a markedly enhanced chemo-photothermal synergistic therapy for 4T1 tumor model mice, compared to chemotherapy alone or PTT. This work presents a new strategy to construct NIR light-responsive hydrogel as one alternative drug delivery system for anticancer applications.

Multiresponsive and Self-Healing Hydrogel via Formation of Polymer-Nanogel Interfacial Dynamic Benzoxaborole Esters at Physiological pH

Nanocomposite hydrogels with multiresponsiveness and self-healing property are attracting extensive interest due to their enhanced performance for a wide range of applications. In this work, we have successfully developed novel hydrogels based on interfacial polymer-nanogel benzoxaborolate cross-linking at physiological pH. Temperature-sensitive nanogels (NG-Gal) containing galactose residues on the nanosurface were prepared and subsequently used as macro-cross-linkers to form a hydrogel network through formation of dynamic adducts with benzoxaborole groups of a hydrophilic copolymer poly(DMA-st-MAABO). Benefiting from the low pK_a value of benzoxaborole (∼7.2), hydrogels can be constructed rapidly at physiological pH, which is of great significance for biomedical applications. Changing the molar ratio between benzoxaborole and galactose was found to alter the mechanical properties of hydrogels as confirmed by rheological measurements. The dynamic nature of benzoxaborole esters endowed the hydrogel with moldability and self-healing ability after disruption. Moreover, the hydrogel showed multiresponsiveness toward pH, sugar, adenosine triphosphate (ATP), hydrogen peroxide (H₂O₂), and temperature. Therefore, the novel nanocomposite hydrogel we demonstrated here exhibits great potential for biomedical applications such as tissue engineering and controlled drug delivery.

Boron-incorporating hemagglutinating virus of Japan envelope (HVJ-E) nanomaterial in boron neutron capture therapy

Combining immunotherapeutic and radiotherapeutic technique has recently attracted much attention for advancing cancer treatment. If boron-incorporated hemagglutinating virus of Japan-envelope (HVJ-E) having high membrane fusion ability can be used as a boron delivery agent in boron neutron capture therapy (BNCT), a radical synergistic improvement of boron accumulation efficiency into tumor cells and antitumor immunity may be induced. In this study, we aimed to develop novel boron-containing biocompatible polymers modified onto HVJ-E surfaces. The copolymer consisting of 2-methacryloyloxyethyl phosphorylcholine (MPC) and methacrylamide benzoxaborole (MAAmBO), poly[MPC-co-MAAmBO], was successfully synthesized by using a simple free radical polymerization. The molecular structures and molecular weight of the poly[MPC-co-MAAmBO] copolymer were characterized by nuclear magnetic resonance and matrix-assisted laser desorption ionization time-of-flight mass spectrometry, respectively. The poly[MPC-co-MAAmBO] was coated onto the HVJ-E surface via the chemical bonding between the MAAmBO moiety and the sugar moiety of HVJ-E. DLS, AFM, UV-Vis, and fluorescence measurements clarified that the size of the poly[MPC-co-MAAmBO]-coated HVJ-E, HVJ-E/p[MPC-MAAmBO], to be about 130 ~ 150 nm in diameter, and that the polymer having 9.82 × 106 ~ 7 boron atoms was steadily coated on a single HVJ-E particle. Moreover, cellular uptake of poly[MPC-co-MAAmBO] could be demonstrated without cytotoxicity, and the hemolysis could be successfully suppressed by 20%. These results indicate that the HVJ-E/p[MPC-MAAmBO] may be used as boron nanocarriers in a combination of immunotherapy with BNCT.

Polyphilicity-An Extension of the Concept of Amphiphilicity in Polymers

Recent developments in synthetic pathways as simple reversible-deactivation radical polymerization (RDRP) techniques and quantitative post-polymerization reactions, most notoriously 'click' reactions, leading to segmented copolymers, have broadened the molecular architectures accessible to polymer chemists as a matter of routine. Segments can be blocks, grafted chains, branchings, telechelic end-groups, covalently attached nanoparticles, nanodomains in networks, even sequences of random copolymers, and so on. In this review, we describe the variety of the segmented synthetic copolymers landscape from the point of view of their chemical affinity, or synonymous philicity, in bulk or with their surroundings, such as solvents, permeant gases, and solid surfaces. We focus on recent contributions, current trends, and perspectives regarding polyphilic copolymers, which have, in addition to hydrophilic and lipophilic segments, other philicities, for example, towards solvents, fluorophilic entities, ions, silicones, metals, nanoparticles, and liquid crystalline moieties.

A General Method for Selective Recognition of Monosaccharides and Oligosaccharides in Water

Molecular recognition of carbohydrates plays vital roles in biology but has been difficult to achieve with synthetic receptors. Through covalent imprinting of carbohydrates in boroxole-functionalized cross-linked micelles, we prepared nanoparticle receptors for a wide variety of mono- and oligosaccharides. The boroxole functional monomer bound the sugar templates through cis-1,2-diol, cis-3,4-diol, and trans-4,6-diol. The protein-sized nanoparticles showed excellent selectivity for d-aldohexoses in water with submillimolar binding affinities and completely distinguished the three biologically important hexoses (glucose, mannose, and galactose). Glycosides with nonpolar aglycon showed stronger binding due to enhanced hydrophobic interactions. Oligosaccharides were distinguished on the basis of their monosaccharide building blocks, glycosidic linkages, chain length, as well as additional functional groups that could interact with the nanoparticles.

The effects of the photo-induced proton generation on the assembly formation of dual-temperature and pH responsive block copolymers

The effects caused by photo-induced proton generation on the assembly formation of dual-temperature/pH-responsive block copolymers are investigated.

Facile Functionalization of Electrospun Poly(ethylene-co-vinyl alcohol) Nanofibers via the Benzoxaborole-Diol Interaction

A facile functionalization method of poly(ethylene-co-vinyl alcohol) (EVOH) nanofiber meshes was demonstrated by utilizing the benzoxaborole-diol interaction between EVOH and benzoxaborole-based copolymers (BOP). EVOH and BOP were firstly mixed to prepare the quasi-gel-state solution with enough viscosity for electro-spinning. The fiber morphology was controlled via changing the mixing ratio of EVOH and BOP. The prepared EVOH/BOP nanofiber mesh showed good stability in aqueous solution. Over 97% of the nanofibers remained after the immersion test for 24 h in acid or alkali aqueous solutions without changing their morphology. Temperature and pH-responsive moieties were copolymerized with BOP, and cationic dye was easily immobilized into the nanofiber mesh via an electrostatic interaction. Therefore, the proposed functionalization technique is possible to perform on multi-functionalized molecule-incorporated nanofibers that enable the fibers to show the environmental stimuli-responsive property for the further applications of the EVOH materials.

Catechol/boronic acid chemistry for the creation of block copolymers with a multi-stimuli responsive junction

A series of well-defined nitrocatechol and boronic acid end-functionalized homopolymers were synthesized via the RAFT process, followed by their coupling reactions leading to block copolymers integrating a multi-stimuli responsive link in between the blocks.