Co-micellization behavior in poloxamers: dissipative particle dynamics study

DPD simulations on mixed polymeric DOX-loaded micelles assembled from PCL-SS-PPEGMA/PDEA-PPEGMA and their dual pH/reduction-responsive release

The design of mixed polymeric micelles by a combination of two or more dissimilar polymers is a potential strategy to achieve multiple stimuli-response for anti-cancer drug delivery. However, their drug loading co-micellization behavior and multiple stimuli-responsive drug release mechanism have been poorly understood at the mesoscopic level, especially in the system that involves reduction-response due to the difficulty of simulation on the cleavage of chemical bonds. In this work, the co-micellization behavior, drug distribution regularities and dual pH/reduction-responsive drug release process of mixed micelles formed by disulfide-linked polycaprolactone-b-polyethylene glycol methyl ether methacrylate (PCL-SS-PPEGMA) and poly(ethylene glycol) methyl ether-b-poly(N,N-diethylamino ethyl methacrylate) (PDEA-PPEGMA) were studied by dissipative particle dynamics (DPD) mesoscopic simulations. A dedicated bond-breaking script was employed to accomplish the disulfide bond-breaking simulations. The results showed that PCL₅₅-SS-PPEGMA₁₀ and PDEA₃₄-PPEGMA₁₁ could be well mixed to form superior DOX-loaded micelles with good drug-loading capacity and drug-controlled release performance. To prepare the DOX-loaded micelles with optimized properties, the simulation results suggested the feed ratio of DOX:PCL₅₅-SS-PPEGMA₁₀:PDEA₃₄-PPEGMA₁₁ set to 3:4:4. Compared with the two single stimuli-response, the dual pH/reduction-response process perfectly combined both pH-response and reduction-response together, providing a higher release rate of DOX. Therefore, this study provides theoretical guidance aimed at the property optimization and micellar structure design of the dual pH/reduction-responsive mixed micelles.

DPD Study on the Interfacial Properties of PEO/PEO-PPO-PEO/PPO Ternary Blends: Effects of Pluronic Structure and Concentration

Using the method of dissipative particle dynamics (DPD) simulations, we investigated the interfacial properties of PEO/PEO-PPO-PEO/PPO ternary blends composed of the Pluronics L64(EO₁₃PO₃₀EO₁₃), F68(EO₇₆PO₂₉EO₇₆), F88(EO₁₀₄PO₃₉EO₁₀₄), or F127(EO₁₀₆PO₇₀EO₁₀₆) triblock copolymers. Our simulations show that: (i) The interfacial tensions (γ) of the ternary blends obey the relationship γF68 < γL64 < γF88 < γF127, which indicates that triblock copolymer F68 is most effective in reducing the interfacial tension, compared to L64, F88, and F127; (ii) For the blends of PEO/L64/PPO and the F64 copolymer concentration ranging from c_cp = 0.2 to 0.4, the interface exhibits a saturation state, which results in the aggregation and micelle formation of F64 copolymers added to the blends, and a lowered efficiency of the L64 copolymers as a compatibilizer, thus, the interfacial tension decreases slightly; (iii) For the blends of PEO/F68/PPO, elevating the Pluronic copolymer concentration can promote Pluronic copolymer enrichment at the interfaces without forming the micelles, which reduces the interfacial tension significantly. The interfacial properties of the blends contained the PEO-PPO-PEO triblock copolymer compatibilizers are, thus, controlled by the triblock copolymer structure and the concentration. This work provides important insights into the use of the PEO-PPO-PEO triblock copolymer as compatibilizers in the PEO and PPO homopolymer blend systems.

Multicore Assemblies from Three-Component Linear Homo-Copolymer Systems: A Coarse-Grained Modeling Study

Multicore polymer micelles and aggregates are assemblies that contain several cores. The dual-length-scale compartmentalized solvophobic–solvophilic molecular environment makes them useful for, e.g., advanced drug delivery, high-precision synthesis platforms, confined catalysis, and sensor device applications. However, designing and regulating polymer systems that self-assemble to such morphologies remains a challenge. Using dissipative particle dynamics (DPD) simulations, we demonstrate how simple, three-component linear polymer systems consisting of free solvophilic and solvophobic homopolymers, and di-block copolymers, can self-assemble in solution to form well-defined multicore assemblies. We examine the polymer property range over which multicore assemblies can be expected and how the assemblies can be tuned both in terms of their morphology and structure. For a fixed degree of polymerization, a certain level of hydrophobicity is required for the solvophobic component to lead to formation of multicore assemblies. Additionally, the transition from single-core to multicore requires a relatively high solvophobicity difference between the solvophilic and solvophobic polymer components. Furthermore, if the solvophilic polymer is replaced by a solvophobic species, well-defined multicore–multicompartment aggregates can be obtained. The findings provide guidelines for multicore assemblies’ formation from simple three-component systems and how to control polymer particle morphology and structure.

Morphological transition of amphiphilic block copolymer/PEGylated phospholipid complexes induced by the dynamic subtle balance interactions in the self-assembled aggregates

Recently, there has been an increasing interest in the control of morphological transition of block copolymer aggregates. Here, we report how to control the morphological transition of methoxy polyethylene glycol–poly(d,l-lactic acid) (PDLLA–MPEG) by adding 1,2-distearoyl-sn-glycero-3-phosphoethanolamine-N-[methoxy(polyethylene glycol)] (DSPE–PEG). In the aggregates formed by dialyzing DSPE–PEG/PDLLA–MPEG mixed solutions against water, the two hydrophobic fatty acid tails of DSPE–PEG will preferentially anchor to the hydrophobic segment end of PDLLA–MPEG by interdigitating between these two tails and PDLLA segments. Consequently, DSPE–PEG and PDLLA–MPEG will form “ABA” temporary supra-amphiphiles in which A represents a poly(ethylene glycol) (PEG) chain segment and B is a mixed hydrophobic segment composed of PDLLA and DSPE segments; the repulsive force derived from the PEG segments of DSPE–PEG can affect the stability of “ABA” temporary supra-amphiphiles. Our results show that the dynamic subtle balance between the number of “ABA” temporary supra-amphiphiles formed and the strength of repulsive force between the PEG segments of DSPE–PEG drives the morphological structure of DSPE–PEG/PDLLA–MPEG aggregates to change from micelles to vesicles, then to semi-vesicles and finally to mixed micelles, with increasing DSPE–PEG additions.

Mesoscopic Simulations of Adsorption and Association of PEO-PPO-PEO Triblock Copolymers on a Hydrophobic Surface: From Mushroom Hemisphere to Rectangle Brush

The dissipative particle dynamics (DPD) method is used to investigate the adsorption behavior of PEO-PPO-PEO triblock copolymers at the liquid/solid interface. The effect of molecular architecture on the self-assembled monolayer adsorption of PEO-PPO-PEO triblock copolymers on hydrophobic surfaces is elucidated by the adsorption process, film properties, and adsorption morphologies. The adsorption thicknesses on hydrophobic surfaces and the diffusion coefficient as well as the aggregation number of Pluronic copolymers in aqueous solution observed in our simulations agree well with previous experimental and numerical observations. The radial distribution function revealed that the ability of self-assembly on hydrophobic surfaces is P123 > P84 > L64 > P105 > F127, which increased with the EO ratio of the Pluronic copolymers. Moreover, the shape parameter and the degree of anisotropy increase with increasing molecular weight and mole ratio of PO of the Pluronic copolymers. Depending on the conformation of different Pluronic copolymers, the morphology transition of three regimes on hydrophobic surfaces is present: mushroom or hemisphere, progressively semiellipsoid, and rectangle brush regimes induced by decreasing molecular weight and mole ratio of EO of Pluronic copolymers.