Tetracycline-Loaded Biomimetic Apatite: An Adsorption Study

Sodium fusidate loaded apatitic calcium phosphates: Adsorption behavior, release kinetics, antibacterial efficacy, and cytotoxicity assessment

The present work reports the adsorption, release, antibacterial properties, and in vitro cytotoxicity of sodium fusidate (SF) associated with a carbonated calcium phosphate bone cement. The adsorption study of SF on cement powder compared to stoichiometric hydroxyapatite and nanocrystalline carbonated apatite was investigated to understand the interaction between this antibiotic and the calcium phosphate phases involved in the cement formulation and setting reaction. The adsorption data revealed a fast kinetic process. However, the evolution of the amount of adsorbed SF was well described by a Freundlich-type isotherm characterized by a low adsorption capacity of the materials toward the SF molecule. The in vitro release results indicated a prolonged and controlled SF release for up to 34 days. The SF amounts eluted daily were at a therapeutic level (0.5-2 mg/L) and close to the antibiotic minimum inhibitory concentration (0.1-0.9 mg/L). Furthermore, the release data fitting and modeling suggested that the drug release occurred mainly by a diffusion mechanism. The antibacterial activity showed the effectiveness of SF released from the formulated cements against Staphylococcus aureus. Furthermore, the biological in vitro study demonstrated that the tested cements didn't show any cytotoxicity towards human peripheral blood mononuclear cells and did not significantly induce inflammation markers like IL-8.

Development of calcium phosphate-chitosan composites with improved removal capacity toward tetracycline antibiotic: Adsorption and electrokinetic properties

Two eco-friendly and highly efficient adsorbents, namely brushite-chitosan (DCPD-CS), and monetite-chitosan (DCPA-CS) composites were synthesized via a simple and low-cost method and used for tetracycline (TTC) removal. The removal behavior of TTC onto the composite particles was studied considering various parameters, including contact time, pollutant concentration, and pH. The maximum TTC adsorption capacity was 138.56 and 112.48 mg/g for the DCPD-CS and DCPA-CS, respectively. Increasing the pH to 11 significantly enhanced the adsorption capacity to 223.84 mg/g for DCPD-CS and 205.92 mg/g for DCPA-CS. The antibiotic adsorption process was well-fitted by the pseudo-second-order kinetic and Langmuir isotherm models. Electrostatic attractions, complexation, and hydrogen bonding are the main mechanisms governing the TTC removal process. Desorption tests demonstrated that the (NH4)2HPO4 solution was the most effective desorbing agent. The developed composites were more efficient than DCPD and DCPA reference samples and could be used as valuable adsorbents of TTC from contaminated wastewater.

One-Pot Synthesis of Bioinspired Peptide-Decorated Apatite Nanoparticles for Nanomedicine

Hybrid organic-inorganic bio-inspired apatite nanoparticles (NPs) are attractive for biomedical applications and especially in nanomedicine. Unfortunately, their applications in nanomedicine are limited by their broad particle size distributions and uncontrolled drug loading due to their multistep synthesis process.  Besides, very few attempts at exposing bioactive peptides on apatite NPs are made. In this work, an original one-pot synthesis of well-defined bioactive hybrid NPs composed of a mineral core of bioinspired apatite surrounded by an organic corona of bioactive peptides is reported. Dual stabilizing-bioactive agents, phosphonated polyethylene glycol-peptide conjugates, are prepared and directly used during apatite precipitation i) to form the organic corona during apatite precipitation, driving the size and shape of resulting hybrid NPs with colloidal stabilization and ii) to expose peptide moieties (RGD or YIGSR sequences) at the NPs periphery in view of conferring additional surface properties to enhance their interaction with cells. Here, the success of this approach is demonstrated, the functionalized NPs are fully characterized by Fourier-transform infrared, Raman, X-ray diffraction, solid and liquid state NMR, transmission electron microscopy, and dynamic light scattering, and their interaction with fibroblast cells is followed, unveiling a synergistic proliferative effect.

Reviewing particulate delivery systems loaded with repurposed tetracyclines - From micro to nanoparticles

Tetracyclines (TCs) are a class of broad-spectrum antibacterial agents recognized for their multifaceted properties, including anti-inflammatory, angiogenic and osteogenic effects. This versatility positions them as suitable candidates for drug repurposing, benefitting from well-characterized safety and pharmacological profiles. In the attempt to explore both their antibacterial and pleiotropic effects locally, innovative therapeutic strategies were set on engineering tetracycline-loaded micro and nanoparticles to tackle a vast number of clinical applications. Moreover, the conjoined drug carrier can function as an active component of the therapeutic approach, reducing off-target effects and accumulation, synergizing to an improvement of the therapeutic efficacy. In this comprehensive review we will critically evaluate recent advances involving the use of tetracyclines loaded onto micro- or nanoparticles, intended for biomedical applications, and discuss emerging approaches and current limitations associated with these drug carriers. Owing to their distinctive physical, chemical, and biological properties, these novel carriers have the potential to become a platform technology in personalized regenerative medicine and other therapeutic applications.

Hydroxyapatite: An antibiotic recruiting moiety for local treatment and prevention of bone infections

Treatment of chronic osteomyelitis by radical debridement and filling of the dead space with antibiotic containing calcium sulfate/hydroxyapatite (CaS/HA) bone substitute has shown excellent long-term outcomes. However, in extensive infections, sessile bacteria may remain in bone cells or soft tissues protected by biofilm leading to recurrences. The primary aim of this study was to evaluate if systemically administrated tetracycline (TET) could bind to pre-implanted HA particles and impart an antibacterial effect locally. In vitro studies indicated that the binding of TET to nano- and micro-sized HA particles was rapid and plateaued already at 1 h. Since protein passivation of HA after in-vivo implantation could affect HA-TET interaction, we investigated the effect of serum exposure on HA-TET binding in an antibacterial assay. Although, serum exposure reduced the zone of inhibition (ZOI) of Staphylococcus aureus, a significant ZOI could still be observed after pre-incubation of HA with serum. We could in addition show that zoledronic acid (ZA) competes for the same binding sites as TET and that exposure to high doses of ZA led to reduced TET-HA binding. In an in-vivo setting, we then confirmed that systemically administered TET seeks HA particles that were pre-implanted in muscle and subcutaneous pouches in rats and mice respectively, preventing HA particles from being colonized by S. aureus. Clinical Significance: This study describes a new drug delivery method that could prevent bacterial colonization of a HA biomaterial and reduce recurrences in bone infection.

Biocompatible MgFeCO3 Layered Double Hydroxide (LDH) for Bone Regeneration-Low-Temperature Processing through Cold Sintering and Freeze-Casting

Layered Double Hydroxides (LDHs) are inorganic compounds of relevance to various domains, where their surface reactivity and/or intercalation capacities can be advantageously exploited for the retention/release of ionic and molecular species. In this study, we have explored specifically the applicability in the field of bone regeneration of one LDH composition, denoted "MgFeCO₃", of which components are already present in vivo, so as to convey a biocompatibility character. The propensity to be used as a bone substitute depends, however, on their ability to allow the fabrication of 3D constructs able to be implanted in bone sites. In this work, we display two appealing approaches for the processing of MgFeCO₃ LDH particles to prepare (i) porous 3D scaffolds by freeze-casting, involving an alginate biopolymeric matrix, and (ii) pure MgFeCO₃ LDH monoliths by Spark Plasma Sintering (SPS) at low temperature. We then explored the capacity of such LDH particles or monoliths to interact quantitatively with molecular moieties/drugs in view of their local release. The experimental data were complemented by computational chemistry calculations (Monte Carlo) to examine in more detail the mineral-organic interactions at play. Finally, preliminary in vitro tests on osteoblastic MG63 cells confirmed the high biocompatible character of this LDH composition. It was confirmed that (i) thermodynamically metastable LDH could be successfully consolidated into a monolith through SPS, (ii) the LDH particles could be incorporated into a polymer matrix through freeze casting, and (iii) the LDH in the consolidated monolith could incorporate and release drug molecules in a controlled manner. In other words, our results indicate that the MgFeCO₃ LDH (pyroaurite structure) may be seen as a new promising compound for the setup of bone substitute biomaterials with tailorable drug delivery capacity, including for personalized medicine.

Sustainable soy protein microsponges for efficient removal of lead (II) from aqueous environments

Protein-based materials recently emerged as good candidates for water cleaning applications, due to the large availability of the constituent material, their biocompatibility and the ease of preparation. In this work, new adsorbent biomaterials were created from Soy Protein Isolate (SPI) in aqueous solution using a simple environmentally friendly procedure. Protein microsponge-like structures were produced and characterized by means of spectroscopy and fluorescence microscopy methods. The efficiency of these structures in removing lead (Pb²⁺) ions from aqueous solutions was evaluated by investigating the adsorption mechanisms. The molecular structure and, consequently, the physico-chemical properties of these aggregates can be readily tuned by selecting the pH of the solution during production. In particular, the presence of β-structures typical of amyloids as well as an environment characterized by a lower dielectric constant seem to enhance metal binding affinity revealing that hydrophobicity and water accessibility of the material are key features affecting the adsorption efficiency. Presented results provide new knowledge on how raw plant proteins can be valorised for the production of new biomaterials. This may offer extraordinary opportunities towards the design and production of new tailorable biosorbents which can also be exploited for several cycles of purification with minimal reduction in performance. SYNOPSIS: Innovative, sustainable plant-protein biomaterials with tunable properties are presented as green solution for water purification from lead (II) and the structure-function relationship is discussed.

Surface Tailoring of 3D Scaffolds to Promote Osteogenic Differentiation

Customized bone scaffolds with osteogenic activities are desired for the regenerative repair of large-scale or irregularly shaped bone defects. This study developed a facile method to create osteogenic surfaces on three-dimensional (3D) printed scaffolds through coating-induced mineralization. The coating was synthesized using chemical vapor deposition of a polyelectrolyte containing oppositely charged groups. The opposite charges on the 3D scaffold played a crucial role in promoting the formation of nanoapatites without agglomeration, resulting in the retention of micro- and nanoscale pore openings needed for preosteoblasts to proliferate, differentiate, and migrate. The nanoapatite scaffold exhibited significant enhancement in osteoinductivity with a 107% increase in alkaline phosphatase expression and a 163% increase in osteocalcin activity compared to the pristine scaffold. The nanoapatite scaffold provided cues for preosteoblasts to grow along aligned features and migrate collectively. The findings of this study demonstrate the synergistic effect of oppositely charged polyelectrolytes and mineralized nanoapatites on promoting osteogenic activities on scaffold surfaces.

The Use of Hydroxyapatite Loaded with Doxycycline (HADOX) in Dentoalveolar Surgery as a Risk-Reduction Therapeutic Protocol in Subjects Treated with Different Bisphosphonate Dosages

Medication-related osteonecrosis of the jaw (MRONJ) is considered as a severe adverse side effect of specific drugs such as anti-resorptive and anti-angiogenic medications. Evidence suggests that MRONJ is linked to invasive dental procedures, mainly dentoalveolar surgery. Several preventive strategies to minimize the risk of developing MRONJ have been investigated. However, no investigation has been attempted to evaluate the therapeutic effect of local drug-delivery technology as a preventive strategy protocol. The aim of this study is to evaluate the efficacy of hydroxyapatite-containing doxycycline (HADOX) in rats with high-risk MRONJ development. All the rats used in this study were divided into seven groups. Six groups of rats out of seven were exposed to two different doses of antiresorptive drug therapy for four weeks before undergoing an upper incisor extraction. After 28 days, all the animals were euthanized, and the bone blocks were processed for histological and histomorphometrical evaluation. The histomorphometric analysis confirmed that newly formed bone (NFB) was present in all groups, with significant differences. NFB in the HADOX group treated with zoledronic acid at 4% showed (28.38; C.I. 22.29-34.48), which represents a significant increase compared to HA (15.69; C.I. 4.89-26.48) (p = 0.02). A similar pattern was observed in the HADOX group treated with zoledronic acid 8% ZA treatment (p = 0.001). Conclusions: HADOX did not inhibit any bone repair and reduced early inflammatory response. Hence, HADOX could promote bone healing in patients undergoing antiresorptive drug therapy.

Strontium-doped apatitic bone cements with tunable antibacterial and antibiofilm ability

Injectable calcium phosphate cements (CPCs) represent promising candidates for the regeneration of complex-shape bone defects, thanks to self-hardening ability, bioactive composition and nanostructure offering high specific surface area for cell attachment and conduction. Such features make CPCs also interesting for functionalization with various biomolecules, towards the generation of multifunctional devices with enhanced therapeutic ability. In particular, strontium-doped CPCs have been studied in the last years due to the intrinsic antiosteoporotic character of strontium. In this work, a SrCPC previously reported as osteointegrative and capable to modulate the fate of bone cells was enriched with hydroxyapatite nanoparticles (HA-NPs) functionalized with tetracycline (TC) to provide antibacterial activity. We found that HA-NPs functionalized with TC (NP-TC) can act as modulator of the drug release profile when embedded in SrCPCs, thus providing a sustained and tunable TC release. In vitro microbiological tests on Escherichia coli and Staphylococcus aureus strains proved effective bacteriostatic and bactericidal properties, especially for the NP-TC loaded SrCPC formulations. Overall, our results indicate that the addition of NP-TC on CPC acted as effective modulator towards a tunable drug release control in the treatment of bone infections or cancers.

Highly Efficient Adsorption of Tetracycline Using Chitosan-Based Magnetic Adsorbent

Herein, tetracycline adsorption employing magnetic chitosan (CS·Fe₃O₄) as the adsorbent is reported. The magnetic adsorbent was synthesized by the co-precipitation method and characterized through FTIR, XRD, SEM, and VSM analyses. The experimental data showed that the highest maximum adsorption capacity was reached at pH 7.0 (211.21 mg g^-1). The efficiency of the magnetic adsorbent in tetracycline removal was dependent on the pH, initial concentration of adsorbate, and the adsorbent dosage. Additionally, the ionic strength showed a significant effect on the process. The equilibrium and kinetics studies demonstrate that Sips and Elovich models showed the best adjustment for experimental data, suggesting that the adsorption occurs in a heterogeneous surface and predominantly by chemical mechanisms. The experimental results suggest that tetracycline adsorption is mainly governed by the hydrogen bonds and cation-π interactions due to its pH dependence as well as the enhancement in the removal efficiency with the magnetite incorporation on the chitosan surface, respectively. Thermodynamic parameters indicate a spontaneous and exothermic process. Finally, magnetic chitosan proves to be efficient in TC removal even after several adsorption/desorption cycles.

Safe-by-Design Antibacterial Peroxide-Substituted Biomimetic Apatites: Proof of Concept in Tropical Dentistry

Bone infections are a key health challenge with dramatic consequences for affected patients. In dentistry, periodontitis is a medically compromised condition for efficient dental care and bone grafting, the success of which depends on whether the surgical site is infected or not. Present treatments involve antibiotics associated with massive bacterial resistance effects, urging for the development of alternative antibacterial strategies. In this work, we established a safe-by-design bone substitute approach by combining bone-like apatite to peroxide ions close to natural in vivo oxygenated species aimed at fighting pathogens. In parallel, bone-like apatites doped with Ag⁺ or co-doped Ag⁺/peroxide were also prepared for comparative purposes. The compounds were thoroughly characterized by chemical titrations, FTIR, XRD, SEM, and EDX analyses. All doped apatites demonstrated significant antibacterial properties toward four major pathogenic bacteria involved in periodontitis and bone infection, namely Porphyromonas gingivalis (P. gingivalis), Aggregatibacter actinomycetemcomitans (A. actinomycetemcomitans), Fusobacterium nucleatum (F. nucleatum), and S. aureus. By way of complementary tests to assess protein adsorption, osteoblast cell adhesion, viability and IC₅₀ values, the samples were also shown to be highly biocompatible. In particular, peroxidated apatite was the safest material tested, with the lowest IC₅₀ value toward osteoblast cells. We then demonstrated the possibility to associate such doped apatites with two biocompatible polymers, namely gelatin and poly(lactic-co-glycolic) acid PLGA, to prepare, respectively, composite 2D membranes and 3D scaffolds. The spatial distribution of the apatite particles and polymers was scrutinized by SEM and µCT analyses, and their relevance to the field of bone regeneration was underlined. Such bio-inspired antibacterial apatite compounds, whether pure or associated with (bio)polymers are thus promising candidates in dentistry and orthopedics while providing an alternative to antibiotherapy.

Distribution of Biominerals and Mineral-Organic Composites in Plant Trichomes

Biomineralization is a common phenomenon in plants and has been shown to be chemically, functionally and topologically diverse. Silica and calcium carbonate have long been known as structural plant biominerals and calcium phosphate (apatite)–long known from animals–has recently been reported. Strikingly, up to three different biominerals may occur in a single trichome in, e.g., Urticaceae and Loasaceae, and in combination with organic compounds, can form organic/inorganic composite materials. This article presents an extension of previous studies on the distribution of these biominerals in Loasaceae trichomes with a focus on their spatial (three-dimensional) distribution and co-localization with organic substances. Light microscopy and scanning electron microscopy with high-resolution EDX element analyses of sample surfaces and sections illustrate the differential distribution and composition of the different biomineral phases across cell surfaces and cell walls. Raman spectroscopy additionally permits the identification of organic and inorganic compounds side by side. All three biominerals may be found in a nearly pure inorganic phase, e.g., on the plant surfaces and in the barbs of the glochidiate trichomes, or in combination with a larger proportion of organic compounds (cellulose, pectin). The cell lumen may be additionally filled with amorphous mineral deposits. Water-solubility of the mineral fractions differs considerably. Plant trichomes provide an exciting model system for biomineralization and enable the in-vivo study of the formation of complex composite materials with different biomineral and organic compounds involved.

Lead(II) ions adsorption onto amyloid particulates: An in depth study

The production of new cost-effective biocompatible sorbent sustainable materials, with natural origins, able to remove heavy metals from water resources is nowadays highly desirable in order to reduce pollution and increase clean water availability. In this context, self-assembled protein materials with amyloid structures seem to have a great potential as natural platform for a broader development of highly-tunable structures. In this work we show how protein particulates, a generic form of protein aggregates, with spherical micro sized shape can be used as adsorbents of Pb²⁺ ions from aqueous solution. The effect of pH, ionic medium, ionic strength and temperature of the metal ion solution on the adsorption ability and affinity has been evaluated revealing the complexity of adsorption mechanisms which are the result of the balance of specific interactions with functional groups in protein structure and not specific ones common to all polypeptide chains, and possibly related to amyloid state and to modification of particulates hydration layer.

Activated Carbon Fiber Cloth/Biomimetic Apatite: A Dual Drug Delivery System

A biomaterial that is both bioactive and capable of controlled drug release is highly attractive for bone regeneration. In previous works, we demonstrated the possibility of combining activated carbon fiber cloth (ACC) and biomimetic apatite (such as calcium-deficient hydroxyapatite (CDA)) to develop an efficient material for bone regeneration. The aim to use the adsorption properties of an activated carbon/biomimetic apatite composite to synthetize a biomaterial to be used as a controlled drug release system after implantation. The adsorption and desorption of tetracycline and aspirin were first investigated in the ACC and CDA components and then on ACC/CDA composite. The results showed that drug adsorption and release are dependent on the adsorbent material and the drug polarity/hydrophilicity, leading to two distinct modes of drug adsorption and release. Consequently, a double adsorption approach was successfully performed, leading to a multifunctional and innovative ACC-aspirin/CDA-tetracycline implantable biomaterial. In a second step, in vitro tests emphasized a better affinity of the drug (tetracycline or aspirin)-loaded ACC/CDA materials towards human primary osteoblast viability and proliferation. Then, in vivo experiments on a large cortical bone defect in rats was carried out to test biocompatibility and bone regeneration ability. Data clearly highlighted a significant acceleration of bone reconstruction in the presence of the ACC/CDA patch. The ability of the aspirin-loaded ACC/CDA material to release the drug in situ for improving bone healing was also underlined, as a proof of concept. This work highlights the possibility of bone patches with controlled (multi)drug release features being used for bone tissue repair.

Composite Drug Delivery System Based on Amorphous Calcium Phosphate-Chitosan: An Efficient Antimicrobial Platform for Extended Release of Tetracycline

One major warning emerging during the first worldwide combat against healthcare-associated infections concerns the key role of the surface in the storage and transfer of the virus. Our study is based on the laser coating of surfaces with an inorganic/organic composite mixture of amorphous calcium phosphate–chitosan–tetracycline that is able to fight against infectious agents, but also capable of preserving its activity for a prolonged time, up to several days. The extended release in simulated fluids of the composite mixture containing the drug (tetracycline) was demonstrated by mass loss and UV–VIS investigations. The drug release profile from our composite coatings proceeds via two stages: an initial burst release (during the first hours), followed by a slower evolution active for the next 72 h, and probably more. Optimized coatings strongly inhibit the growth of tested bacteria (Enterococcus faecalis and Escherichia coli), while the drug incorporation has no impact on the in vitro composite’s cytotoxicity, the coatings proving an excellent biocompatibility sustaining the normal development of MG63 bone-like cells. One may, therefore, consider that the proposed coatings’ composition can open the prospective of a new generation of antimicrobial coatings for implants, but also for nosocomial and other large area contamination prevention.

Toward a doxorubicin-loaded bioinspired bone cement for the localized treatment of osteosarcoma

Aims: Osteosarcoma represents the second most common cause of death in children and young adults. No biomaterial allowing local drug delivery has been specifically developed. However, a biocompatible bioactive implantable material could prevent some amputations, and the local release of an antitumor agent could limit risks of relapse and metastasis. Methods: We propose a proof of concept of a self-setting paste combining amorphous calcium phosphate and doxorubicin-loaded particles of bone-like carbonated nanocrystalline apatite, as a means of local release. Results: The cement formulation and doping, first with folic acid and then with doxorubicin, was successful. Its physicochemistry was scrutinized. Preliminary in vivo data on an invasive osteosarcoma rat model suggest a limiting effect on metastatic events in the lungs without signs of toxicity.

Controlled surface functionalization of Ni-S nanostructures for pH-responsive selective and superior pollutants adsorption

Herein, we developed a synthetic strategy to functionalize Ni-S nanostructures (NS) using a facile precipitation method at moderate temperature. The surface functionality of NS is controlled by varying amount of mixed surfactants to achieve the pH-responsive selective adsorption of anionic and cationic dyes and the adsorption of ciprofloxacin (CIP) and tetracycline (TC) antibiotics. Powder XRD diffraction pattern revealed the phase of NS was changed from α-NiS to mixed phases after functionalization. The surface area of functionalized NS was significantly enhanced by ~5 times of that unfunctionalized NS as 6.6 m²g^-1 to 30.3 m²g^-1. The NS selectively adsorbed methyl orange (MO) at pH 4.5 and methylene blue (MB) at pH 11.5 with separation efficiency values of 94.2% and 97.9% respectively. The maximum adsorption capacity for MO, MB, TC and CIP are obtained as 1526.3, 1031.2, 1540.8 and 632.4 mg g^-1, respectively. The electrostatic interaction is predominantly involved in the adsorption of dyes whereas adsorption of antibiotics changed to hydrogen bonding and metal coordination. Thermodynamics parameters indicated exothermic and spontaneous adsorption of dyes. The optimized adsorbent is easily recyclable. Thus, the developed strategy of functionalization of nanostructures unveils a practical approach towards selective and efficient adsorption of organic pollutants.

Non-Arrhenius kinetics and slowed-diffusion mechanism of molecular aggregation of a rhodamine dye on colloidal particles

The non-covalent association is important for many fields of science, including processes in living systems. This work elucidates the mechanism of rhodamine 123 molecular aggregation in dispersions of a layered silicate and explains the mystery of the slow kinetics of this process. Chemometric analysis of thousands of spectra recorded by stopped-flow visible spectroscopy identified two parallel diffusion processes described by a two-phase exponential function. The slow and fast processes followed the super-Arrhenius kinetics and were assigned to lateral (surface) diffusion and inter-particle diffusion of dye cations, respectively. This work, supported by a large amount of data and their in-depth analysis, provides the first evidence of how these processes coexist together and provides quantitative analysis of their dependence on the reaction conditions. The implications of this work can be crucial for understanding the mechanism of the non-covalent association of adsorbed molecules in nature.

Lead immobilization assisted by fungal decomposition of organophosphate under various pH values

Organic phosphates (OP) account for approximately 30-90% of total soil P. However, it is too stable to be utilized by plants as available P source. Aspergillus niger (A. niger) has considerable ability to secret phytase to decompose OP. Meanwhile, mineralization of lead (Pb) is efficient to achieve its remediation. This study hence investigated Pb immobilization by A. niger assisted decomposition of OP under variable acidic environments. A. niger can survive in the acidic environment as low as pH = 1.5. However, alternation of environmental pH within 3.5-6.5 significantly changed fungal phytase secretion. In particular, weakly acidic stimulation (pH of ~5.5) increased phytase activity secreted by A. niger to 0.075 µmol/min/mL, hence elevating P release to a maximal concentration of ~20 mg/L. After Pb addition, ATR-IR and TEM results demonstrated the formation of abundant chloropyromorphite [Pb5(PO4)3Cl] mineral on the surface of mycelium at pH = 5.5. Anglesite, with a higher solubility than pyromorphite, was precipitated massively in other treatments with pH lower or higher than 5.5. This study elucidated the great potential of applying OP for Pb immobilization in contaminated water.

Phosphorylated Zein as Biodegradable and Aqueous Nanocarriers for Pesticides with Sustained-Release and anti-UV Properties

Zein's prevalent hydrophobic character is one of the major challenges associated with ineffective utilization as an aqueous nanocarrier for pesticides. Herein, we report an effective approach to hydrophilic modification of zein by phosphorylation using nontoxic sodium tripolyphosphate (STP), thereby improving the water-solubility, foliage wettability, and adhesion ability of zein as a nanocarrier for sustained release of pesticides. The procedure relied on zein grafted with STP via N- and O- phosphate bonds and encapsulation of avermectin (AVM) as a hydrophobic model drug using phosphorylated zein (P-Zein), which achieved pH sensitivity to controlled release of AVM in various applicable environments. The chemical interaction between zein and STP was confirmed by Fourier transform infrared, thermogravimetric analysis, and differential scanning calorimetric. Scanning electron microscopy, dynamic light scattering, and zeta potential technique were applied to investigate their structural characteristics and stability, from which it was found that AVM encapsulated in P-Zein (AVM@P-Zein) formed uniform nanoparticles with average sizes in the range of 174-278 nm under different conditions, and had an excellent stability in aqueous solution. Besides, AVM@P-Zein facilitated the wettability on the foliage surface evidenced from contact angle values owing to the amphiphilic character after phosphorylation as well as enhanced the adhesion ability between liquid and leaf, restricting the pesticide runoff. Ultraviolet-visible spectroscopy was employed to explore the anti-UV property and encapsulation as well as release behavior, which revealed that the presence of P-Zein like a shell protects AVM from UV photolysis with encapsulation efficiency of approximately 81.52%, and the release of AVM from P-Zein showed pH-responsive behavior ascribed to protonation and deprotonation of phosphate under various pH conditions fitting to Elovich kinetic model, achieving the relatively more rapid release under acidic conditions. More importantly, AVM@P-Zein retained the toxicity for insecticidal effect.

Microspheres of alginate encapsulated minocycline-loaded nanocrystalline carbonated hydroxyapatite: therapeutic potential and effects on bone regeneration

Background and objective: Tetracycline and its derivatives, combined with calcium phosphates, have been proposed as a delivery system to control inflammatory processes and chronic infections. The objective of this study was to evaluate the microspheres of alginate encapsulated minocycline-loaded nanocrystalline carbonated hydroxyapatite (CHAMINO) as a biomimetic device to carry out target-controlled drug delivery for alveolar bone repair.

Methods: CHAMINO microspheres were implanted in a rat central incisor socket after 7 and 42 days. New bone was formed in both groups between 7 and 42 days of implantation. However, the bone growth was significantly higher for the CHAMINO microspheres.

Results: The minocycline (MINO) loading capacity of the nanocrystaline carbonated hydroxyapatite (CHA) nanoparticles was 25.1±2.2 µg MINO/mg CHA for adsorption over 24 hrs. The alginate microspheres containing minocycline-loaded CHA were biologically active and inhibited the Enterococcus faecalis culture growth for up to seven days of the MINO release. An osteoblastic cell viability assay based on the resazurin reduction was conducted after the cells were exposed to the CHAMINO powder and CHAMINO microspheres. Thus, it was found that the alginate extracts encapsulated the minocycline-loaded CHA microspheres and did not affect the osteoblastic cell viability, while the minocycline-doped CHA powder reduced the cell viability by 90%.

Conclusion: This study concluded that the alginate microspheres encapsulating the minocycline-loaded nanocrystalline carbonated hydroxyapatite exhibited combined antibacterial activity against Enterococcus faecalis with cytocompatibility and osteoconduction properties. The significant improvement in the new bone formation after 42 days of implantation suggests that the CHAMINO microsphere has potential in clinical applications of bone regeneration.

A novel hay-derived biochar for removal of tetracyclines in water

The biochars derived from alfalfa (AF) and bermudagrass (BG), the abundant grass hays to cows, were prepared, characterized and used for removal of tetracycline (TC) in water. The alfalfa-derived biochar (AF-BC) has exhibited outstanding TC adsorption capacity (372 mg/g), which was about 8-fold higher than that of bermudagrass-derived biochar (BG-BC). In addition, the TC adsorption capacity of AF-BC was comparable with those of the commercial activated carbons under the same conditions. The surface structure, chemistry and high ash contents of AF-BC suggested the hydrogen bonding, electrostatic interactions and surface complexation between AF-BC and TC. Furthermore, hydroxyapatite (HAP; Ca₅(PO₄)₃OH) and calcite (CaCO₃) on the surface of AF-BC may also contribute to adsorption of TC via surface complexation, hydrogen bonding and electrostatic interactions. The alkaline desorption-driven regeneration of TC-spent AF-BC led to effective adsorption-desorption for multiple cycles, which indicated AF-BC could be a cost-effective adsorbent for TC in water and wastewater.

Interaction of Folic Acid with Nanocrystalline Apatites and Extension to Methotrexate (Antifolate) in View of Anticancer Applications

Nanocrystalline apatites mimicking bone mineral represent a versatile platform for biomedical applications thanks to their similarity to bone apatite and the possibility to (multi)functionalize them so as to provide "à la carte" properties. One relevant domain is in particular oncology, where drug-loaded biomaterials and engineered nanosystems may be used for diagnosis, therapy, or both. In a previous contribution, we investigated the adsorption of doxorubicin onto two nanocrystalline apatite substrates, denoted HA and FeHA (superparamagnetic apatite doped with iron ions), and explored these drug-loaded systems against tumor cells. To widen their applicability in the oncology field, here we examine the interaction between the same two substrates and two other molecules: folic acid (FA), often used as cell targeting agent, and the anticancer drug methotrexate (MTX), an antifolate analogue. In a first stage, we investigated the adsorptive behavior of FA (or MTX) on both substrates, evidencing their specificities. At low concentration, typically under 100 mmol/L, adsorption onto HA was best described using the Sips isotherm model, while the formation of a calcium folate secondary salt was evidenced at high concentration by Raman spectroscopy. Adsorption onto FeHA was instead fitted to the Langmuir model. A larger adsorptive affinity was found for the FeHA substrate compared to HA; accordingly, a faster release was noticed from HA. In vitro tests carried out on human osteosarcoma cell line (SAOS-2) allowed us to evaluate the potential of these compounds in oncology. Finally, in vivo (subcutaneous) implantations in the mouse were run to ascertain the biocompatibility of the two substrates. These results should allow a better understanding of the interactions between FA/MTX and bioinspired nanocrystalline apatites in view of applications in the field of cancer.

Laminin functionalized biomimetic apatite to regulate the adhesion and proliferation behaviors of neural stem cells

Background

Functionalizing biomaterial substrates with biological signals shows promise in regulating neural stem cell (NSC) behaviors through mimicking cellular microenvironment. However, diverse methods for immobilizing biological molecules yields promising results but with many problems. Biomimetic apatite is an excellent carrier due to its non-toxicity, good biocompatibility, biodegradability, and favorable affinity to plenty of molecules. Therefore, it may provide a promising alternative in regulating NSC behaviors.

Methods

Biomimetic apatite immobilized with the extracellular protein - laminin (LN) was prepared through coprecipitation process in modified Dulbecco's phosphate-buffered saline (DPBS) containing LN. The amount of coprecipitated LN and their release kinetics were examined. The adhesion and proliferation behaviors of NSC on biomimetic apatite immobilized with LN were investigated.

Results

The coprecipitation approach provided well retention of LN within biomimetic apatite up to 28 days, and supported the adhesion and proliferation of NSCs without cytotoxicity. For long-term cultivation, NSCs formed neurosphere-like aggregates on non-functionalized biomimetic apatite. A monolayer of proliferated NSCs on biomimetic apatite with coprecipitated LN was observed and even more stable than the positive control of LN coated tissue-culture treated polystyrene (TCP).

Conclusion

The simple and reproducible method of coprecipitation suggests that biomimetic apatite is an ideal carrier to functionalize materials with biological molecules for neural-related applications.

Remediation of lead-contaminated water by geological fluorapatite and fungus Penicillium oxalicum

Phosphate-solubilizing fungi (PSF) can secrete large amounts of organic acids. In this study, the application of the fungus Penicillium oxalicum and geological fluorapatite (FAp) to lead immobilization was investigated. The formation and morphology of the lead-related minerals were analyzed by ATR-IR, XRD, Raman, and SEM. The quantity of organic acids secreted by P. oxalicum reached the maximum on the fourth day, which elevated soluble P concentrations from 0.4 to 108 mg/L in water. The secreted oxalic acid dominates the acidity in solution. P. oxalicum can survive in the solution with Pb concentration of ~ 1700 mg/L. In addition, it was shown that ~ 98% lead cations were removed while the fungus was cultured with Pb (~ 1700 mg/L) and FAp. The mechanism is that the released P from FAp (enhanced by organic acids) can react with Pb²⁺ to form the stable pyromorphite mineral [Pb₅(PO₄)₃F]. The precipitation of lead oxalate also contributes to Pb immobilization. However, lead oxalate is more soluble due to its relatively high solubility. P. oxalicum has a higher rate of organic acid secretion compared with other typical PSF, e.g., Aspergillus niger. This study sheds light on bright future of applying P. oxalicum in Pb remediation.

Fluorescence Quenching Investigation of Methyl Red Adsorption on Aluminum-Based Metal-Organic Frameworks

The adsorption of methyl red (MR) isomers (ortho, meta, and para) on metal-organic frameworks (MOFs) was investigated by using a fluorescence quenching technique. All three MR isomers were found to quench the fluorescence of MOFs effectively. Nonlinear fluorescence quenching trends were observed in Stern-Volmer plots. A modified nonlinear Stern-Volmer equation with the concepts of multiple adsorption sites, adsorption strength, and quencher accessibility was successfully adopted to fit the fluorescence quenching data. The fitted parameters were correlated with the structural properties of MRs and MOFs. The order of quenching efficiency was found to be m-MR > p-MR > o-MR for all MOFs. This indicates that MR molecules not only adsorb via carboxylate-metal bonding but also adsorb through π-π interactions between the aromatic rings of MR and linker molecules in MOFs. The position of the carboxylate group in MRs and the structure of the linkers in MOFs are the key factors affecting the fluorescence quenching efficiency.

Monocyclic β-lactams loaded on hydroxyapatite: new biomaterials with enhanced antibacterial activity against resistant strains

The development of biomaterials able to act against a wide range of bacteria, including antibiotic resistant bacteria, is of great importance since bacterial colonization is one of the main causes of implant failure. In this work, we explored the possibility to functionalize hydroxyapatite (HA) nanocrystals with some monocyclic N-thio-substituted β-lactams. To this aim, a series of non-polar azetidinones have been synthesized and characterized. The amount of azetidinones loaded on HA could be properly controlled on changing the polarity of the loading solution and it can reach values up to 17 wt%. Data on cumulative release in aqueous solution show different trends which can be related to the lipophilicity of the molecules and can be modulated by suitable groups on the azetidinone. The examined β-lactams-HA composites display good antibacterial activity against reference Gram-positive and Gram-negative bacteria. However, the results of citotoxicity and antibacterial tests indicate that HA loaded with 4-acetoxy-1-(methylthio)-azetidin-2-one displays the best performance. In fact, this material strongly inhibited the bacterial growth of both methicillin resistant and methicillin susceptible clinical isolates of S. aureus from surgical bone biopsies, showing to be a very good candidate as a new functional biomaterial with enhanced antibacterial activity.

A colorimetric biosensor based on guanidinium recognition for the assay of protein tyrosine phosphatase 1B and its inhibitors

A new colorimetric biosensor for the assay of PTP1B and its inhibitors based on coordination between RGC/AuNPs and MNPs/APP.

Lead immobilization by geological fluorapatite and fungus Aspergillus niger

Phosphate solubilizing fungi have high ability to secrete organic acids. In this study, fungus Aspergillus niger and geological fluorapatite were applied in lead remediation in aqueous solution. Formation and morphology of the lead minerals, e.g., pyromorphite and lead oxalate, were investigated by SEM, XRD, and ATR-IR. The total quantity of organic acids reached the maximum at the sixth day, which improved the concentration of soluble P up to ∼370mg/L from ∼0.4mg/L. The organic acids, especially the oxalic acid, enhance the solubility of fluorapatite significantly. The stable fluoropyromorphite [Pb₅(PO₄)₃F] is precipitated with the elevated solubility of fluorapatite in the acidic environment. Furthermore, A. niger grows normally with the presence of lead cations. It is shown that >99% lead cations can be removed from the solution. However, immobilization caused by the precipitation of lead oxalate cannot be ignored if the fungus A. niger was cultured in the Pb solution. This study elucidates the mechanisms of lead immobilization by FAp and A. niger, and sheds its perspective in lead remediation, especially for high Pb concentration solution.

Superparamagnetic iron-doped nanocrystalline apatite as a delivery system for doxorubicin

Iron-doped superparamagnetic apatite nanoparticles are promising materials for magnetic drug delivery systems due to their ability to strongly bind the anticancer doxorubicin and provide an active control over the drug release by using a low-frequency pulsed electromagnetic field.

Adsorption of nucleotides on biomimetic apatite: The case of cytidine 5' monophosphate (CMP)

The chemical interaction between DNA macromolecules and hard tissues in vertebrate is of foremost importance in paleogenetics, as bones and teeth represent a major substrate for the genetic material after cell death. Recently, the empirical hypothesis of DNA "protection" over time thanks to its adsorption on hard tissues was revisited from a physico-chemical viewpoint. In particular, the existence of a strong interaction between phosphate groups of DNA backbone and the surface of apatite nanocrystals (mimicking bone/dentin mineral) was evidenced on an experimental basis. In the field of nanomedicine, DNA or RNA can be used for gene transport into cells, and apatite nanocarriers then appear promising. In order to shed some more light on interactions between DNA molecules and apatite, the present study focuses on the adsorption of a "model" nucleotide, cytidine 5' monophosphate (CMP), on a carbonated biomimetic apatite sample. The follow-up of CMP kinetics of adsorption pointed out the rapidity of interaction with stabilization reached within few minutes. The adsorption isotherm could be realistically fitted to the Sips model (Langmuir-Freundlich) suggesting the influence of surface heterogeneities and adsorption cooperativity in the adsorption process. The desorption study pointed out the reversible character of CMP adsorption on biomimetic apatite. This contribution is intended to prove helpful in view of better apprehending the molecular interaction of DNA fragments and apatite compounds, independently of the application domain, such as bone diagenesis or nanomedicine. This study may also appear informative for researchers interested in the origins of life on Earth and the occurrence and behavior of primitive biomolecules.

Adsorption between TC-stabilized AuNPs and the phosphate group: application of the PTP1B activity assay

Based on the adsorption between tetracycline (TC) and phosphate groups, a general colorimetric method is explored in this work by using TC-stabilized gold nanoparticles (TC/AuNPs) and 4-aminophenyl phosphate-functionalized Fe₃O₄ magnetic nanoparticles (APP/MNPs).

Iron-incorporated mesoporous silica for enhanced adsorption of tetracycline in aqueous solution

The iron-incorporated influenced the adsorption of TC greatly and inner-sphere surface complexes formed between TC and the Fe(iii) on the adsorbent.