Controlling Carbon-Nanotube—Phospholipid Solubility by Curvature-Dependent Self-Assembly

Effects of Molarity and Storage Time of MWCNTs on the Properties of Cement Paste

Nowadays, nanomaterials in cement pastes are among the most important topics in the cement industry because they can be used for several applications. For this reason, this work presents a study about the influence of changing the molarity of dispersed multiple wall carbon nanotubes (MWCNTs) and varying the number of storage days on the mechanical properties of the cement paste. To achieve this objective, dispersions of 0.35% MWCNTs, varying the molarity of the surfactant as 10 mM, 20 mM, 40 mM, 60 mM, 80 mM, and 100 mM, were performed. The mixture of materials was developed using the sonication process; furthermore, materials were analyzed using UV-Vis, Z-potential, and Raman spectroscopy techniques. Materials with a molarity of 10 mM exhibited the best results, allowing them to also be stored for four weeks. Regarding the mechanical properties, an increase in the elastic modulus was observed when MWCNTs were included in the cement paste for all storage times. The elastic modulus and the maximum stress increased as the storage time increased.

Supramolecular Self-Assembly of Dipalmitoylphosphatidylcholine and Carbon Nanotubes: A Dissipative Particle Dynamics Simulation Study

Dissipative particle dynamics simulations were performed to investigate the self-assembly of dipalmitoylphosphatidylcholine (DPPC) as a model lipid membrane on the surface of carbon nanotubes (CNTs). The influence of surface curvature of CNTs on self-assembly was investigated by performing simulations on solutions of DPPC in water in contact with CNTs of different diameters: CNT (10, 10), CNT (14, 14), CNT (20, 20), and CNT (34, 34). DPPC solutions with a wide range of concentrations were chosen to allow for formation of lipid structures of various surface densities, ranging from a submonolayer to a well-organized monolayer and a CNT covered with a lipid monolayer immersed in a planar lipid bilayer. Our results are indicative of a sequence of phase-ordering processes for DPPC on the surface of CNTs. At low surface coverages, the majority of hydrocarbon tail groups of DPPC are in contact with the CNT surface. Increasing the surface coverage leads to the formation of hemimicellar aggregates, and at high surface coverages close to the saturation limit, an organized lipid monolayer self-assembles. An examination of the mechanism of self-assembly reveals a two-step mechanism. The first step involves densification of DPPC on the CNT surface. Here, the lipid molecules do not adopt the order of the target phase (lipid monolayer on the CNT surface). In the second step, when the lipid density on the CNT surface is above a threshold value (close to saturation), the lipid molecules reorient themselves to form an organized monolayer around the tube. Here, the DPPC molecules adopt stretched conformations normal to the surface, the end hydrocarbon groups adsorb on the surface, and the head groups occupy the outermost part of the monolayer. The saturation density and the degree of lipid ordering on the CNT surface depend on the surface curvature. The saturation density increases with increased surface curvature, and better-ordered structures are formed on less curved surfaces.

Supramolecular Functionalization for Improving Thermoelectric Properties of Single-Walled Carbon Nanotubes-Small Organic Molecule Hybrids

Single-walled carbon nanotube (SWCNTs-P)-small organic molecule hybrid materials are promising candidates for achieving high thermoelectric (TE) performance. In this study, we synthesized rod-coil amphiphilic molecules, that is, tri(ethylene oxide) chain-attached bis(bithiophenyl)-terphenyl derivatives (1 and 2). Supramolecular functionalization of SWCNTs-P with 1 or 2 induced charge-transfer interactions between them. Improved TE properties of the supramolecular hybrids (SWCNTs-1 and SWCNTs-2) are attributed to increased charge-carrier concentration (electrical conductivity), interfacial phonon scattering (thermal conductivity), and energy difference between the transport and Fermi levels (E_Tr - E_F; Seebeck coefficient). SWCNTs-2 exhibited a ZT of 0.42 × 10^-2 at 300 K, which is 350% larger than that of SWCNTs-P. Furthermore, 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F₄TCNQ)-doped SWCNTs-2 showed the highest ZT value of 1.96 × 10^-2 at 300 K among SWCNTs-P/small organic molecule hybrids known until now. These results demonstrated that the supramolecular functionalization of SWCNTs-P with small organic molecules could be useful for enhancement of TE performance and applications in wearable/flexible thermoelectrics.

Adsorption of impurities in vegetable oil: A molecular modelling study

Here, the adsorption of impurity species from triglyceride solvent representing a model vegetable oil is studied using atomistic molecular dynamics simulations. We compare the adsorption of water, glycerol, oleic acid, monoolein, and two types of phospholipids on model silica adsorbents differing in their OH-group density, i.e. hydrogen bonding ability, quartz and cristobalite. We find that the species containing charged groups, phospholipids DOPC and DOPE, adsorb significantly stronger than the nonionic impurities. Secondary contribution to adsorption arises from hydrogen bonding capability of the impurity species, the silica surface, and also the triglyceride solvent: in general, more hydrogen bonding sites in impurity species leads to enhanced adsorption but hydrogen bonding with solvent competes for the available sites. Interestingly, adsorption is weaker on cristobalite even though it has a higher hydrogen bonding site density than quartz. This is because the hydrogen bonds can saturate each other on the adsorbent. The finding demonstrates that optimal adsorption response is obtained with intermediate adsorbent hydrogen bonding site densities. Additionally, we find that monoolein and oleic acid show a concentration driven adsorption response and reverse micelle like aggregate formation in bulk triglyceride solvent even in the absence of water. The findings offer insight into adsorption phenomena at inorganic adsorbent - apolar solvent interfaces and provide guidelines for enhanced design of adsorbent materials for example for vegetable oil purification.

Shape and Phase Transitions in a PEGylated Phospholipid System

Poly(ethylene glycol) (PEG) polymers and PEG-conjugated lipids are widely used in bioengineering and drug transport applications. A PEG layer in a drug carrier increases hydrophilic repulsion, inhibits membrane fusion and serum opsonin interactions, and prolongs the storage and circulation time. It can also change the carrier shape and have an influence on many properties related to the content release of the carrier. In this paper, we focus on the physicochemical effects of PEGylation in the lipid bilayer. We introduce laurdanC as a fluorophore for shape recognition and phase transition detection. Together with laurdanC, cryogenic transmission electron microscopy, differential scanning calorimetry, molecular dynamics simulations, and small-angle X-ray scattering/wide-angle X-ray scattering, we acquire information of the particle/bilayer morphology and phase behavior in systems containing 1,2-dipalmitoyl- sn-glycero-3-phosphocholine:1,2-distearoyl- sn-glycero-3-phosphoethanolamine-PEG(2000) with different fractions. We find that PEGylation leads to two important and potentially usable features of the system. (1) Spherical vesicles present a window of elevated chain-melting temperatures and (2) lipid packing shape-controlled liposome-to-bicelle transition. The first finding is significant for targets requiring multiple release sequences and the second enables tuning the release by composition and the PEG polymer length. Besides drug delivery systems, the findings can be used in other smart soft materials with trigger-polymers as well.

Simulations Study of Single-Component and Mixed n-Alkyl-PEG Micelles

Here, we study one-component and mixed n-alkyl-poly(ethylene glycol) (C mE n) micelles with varying poly(ethylene glycol) (PEG) chain lengths n using coarse-grained molecular simulations. These nonionic alkyl-PEG surfactants and their aggregates are widely used in bio and chemical technology. As expected, the simulations show that increasing the PEG chain length decreases the alkyl-PEG micelle core diameter and the aggregation number but also enhances PEG chain penetration to the core region and spreads the micelle corona. Both the core and corona density are heavily dependent on the PEG chain length and decrease with increasing PEG length. Furthermore, we find that the alkyl-PEG surfactants exhibit two distinct micellization modes: surfactants with short PEG chains as their hydrophilic heads aggregate with the PEG heads relatively extended. Their aggregation number and the PEG corona density are dictated by the core carbon density. For longer PEG chains, the PEG sterics, that is, the volume occupied by the PEG head group, becomes the critical factor limiting the aggregation. Finally, simulations of binary mixtures of alkyl-PEGs of two different PEG chain lengths show that even in the absence of core-freezing, the surfactants prefer the aggregate size of their single-component solutions with the segregation propelled via enthalpic contributions. The findings, especially as they provide a handle on the density and the density profile of the aggregates, raise attention to effective packing shape as a design factor of micellar systems, for example, drug transport, solubilization, or partitioning.

Self-Assembly of Rod-Coil Block Copolymers on Carbon Nanotubes: A Route toward Diverse Surface Nanostructures

In this work, it is reported that poly(γ-benzyl-l-glutamate)-block-poly(ethylene glycol) (PBLG-b-PEG) rod-coil block copolymers (BCPs) can disperse carbon nanotubes (CNTs) in solution and form various surface nanostructures on the CNTs via solution self-assembly. In an organic solvent that dissolves the BCPs, the PBLG rod blocks adsorb on CNT surfaces, and the BCPs form conformal coatings. Then, by the introduction of water, a selective solvent for PEG blocks, the BCPs in the coatings further self-assemble into diverse surface nanostructures, such as helices (left-handed or right-handed), gyros, spheres, and rings. The morphology of the surface nanostructure can be tailored by initial organic solvent composition, preparation temperature, feeding ratio of BCPs to CNTs, degree of polymerization of PBLG blocks, and diameter of the CNTs.

Understanding carbon nanotube channel formation in the lipid membrane

Carbon nanotubes (CNTs) have been considered a prominent nano-channel in cell membranes because of their prominent ion-conductance and ion-selectivity, offering agents for a biomimetic channel platform. Using a coarse-grained molecular dynamics simulation, we clarify a construction mechanism of vertical CNT nano-channels in a lipid membrane for a long period, which has been difficult to observe in previous CNT-lipid interaction simulations. The result shows that both the lipid coating density and length of CNT affect the suitable fabrication condition for a vertical and stable CNT channel. Also, simulation elucidated that a lipid coating on the surface of the CNT prevents the CNT from burrowing into the lipid membrane and the vertical channel is stabilized by the repulsion force between the lipids in the coating and membrane. Our study provides an essential understanding of how CNTs can form stable and vertical channels in the membrane, which is important for designing new types of artificial channels as biosensors for bio-fluidic studies.

Effects of 1-hexanol on C12E10 micelles: a molecular simulations and light scattering study

The micelles of the non-ionic C₁₂E₁₀ surfactant and 1-hexanol as an aqueous solution additives are studied toward the purpose of understanding the role of alcohol additives in tuning the characteristics of alkyl-ethoxylate micellar systems. Our dynamic light scattering and cloud point experiments show that the addition of hexanol induces a response similar to an increase of temperature. We associate the change with increased attraction between the micelles at low to moderate hexanol loadings and a potential increase of the aggregate size at a high hexanol-to-surfactant ratio. Detailed molecular dynamic simulation characterization shows that hexanol solubilizes to a micelle palisade layer when the hexanol-to-C₁₂E₁₀ ratio is less than or equal to 0.5 while swollen micelles, in which a part of hexanol forms an oil core, are present when the ratio increases above approximately 1.5. The simulations indicate that the surface of the micelles is rough. Formation of reverse hexanol structures akin to those found in bulk octanol is observed in the oil core. Molecular simulations associate the increase in attraction between micelles observed via the experiments with decreased chain density in the headgroup region. This density decrease is caused by hexanol molecules solubilized between neighbouring surfactants. Altogether, these findings provide detailed physical characterization of the effect of an archetypal solution additive, hexanol, on an alkyl ethoxylate micelle system. These findings could bear a significance in designing micellar and emulsion based systems with desired solution characteristics or properties for e.g. drug delivery, catalysis, or platforms for green chemistry reactions.

Phospholipid-mediated exfoliation as a facile preparation method for graphene suspensions

This paper deals with simple, inexpensive and ‘green’ methods of production for graphene in colloidal dispersion. Herein, we report on such a method by preparing aqueous graphene dispersions via ultrasonic exfoliation in the presence of 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC). The product predominantly consists of few-layer graphene flakes coated by DOPC with a lateral size of a few tens to hundreds of nm, as confirmed by Raman and X-ray photoelectron spectroscopies, thermogravimetric analysis (TGA), dynamic light scattering (DLS) and atomic force microscopy (AFM). The novelty of this method lies in its dependence on a typical soft matter property: the fluidity of the hydrophobic chains. Stiffer phospholipids such as 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC, which possesses two palmitoyl chains) or 2-oleoyl-1-palmitoyl-sn-glycero-3-phosphocholine (POPC, one palmitoyl, one oleyl chain) are ineffective at dispersing graphene; however, in the presence of cholesterol these phospholipids also become effective mediators. The phospholipid coating renders the flakes compatible with biological environments.

A simple, inexpensive and ‘green’ method of production for graphene in colloidal dispersion.

Equimolar mixtures of aqueous linear and branched SDBS surfactant simulated on single walled carbon nanotubes

The self-assembly of mixed SDBS surfactant aggregates is strongly dependent on surface coverage, but not on tube diameter.