Decrease of Droplet Size of the Reverse Microemulsion 1-Butyl-3-methylimidazolium Tetrafluoroborate/Triton X-100/Cyclohexane by Addition of Water

Synergic effects of ultrasound and ionic liquids on fluconazole emulsion

The aim of this work was to evaluate the influence of US on the properties of the fluconazole emulsions prepared using imidazolium-based ILs ([C_n C₁im]Br). The effects of the preparation method (mechanical stirring or US), US amplitude, alkyl chain length (of [C₁₂C₁im]Br or [C₁₆C₁im]Br), and IL concentration on the physicochemical properties were evaluated. Properties such as droplet size, span index, morphology, viscosity encapsulation efficiency, and drug release profile were determined. The results showed that US-prepared emulsions had a smaller droplet size and smaller polydispersity (Span) than those prepared by mechanical stirring. Additionally, the results showed that emulsions prepared with [C₁₆C₁im]Br and US had spherical shapes and increased stability compared to emulsions prepared by MS, and also depended on the IL concentration. The emulsion prepared by US at 40% amplitude had increased encapsulation efficiency. US provided a decrease in the viscosity of emulsions containing [C₁₂C₁im]Br; however, in general, all emulsions had viscosity close to that of water. Emulsions containing [C₁₆C₁im]Br had the lowest viscosities of all the emulsions. The emulsions containing the IL [C₁₆C₁im]Br had more controlled release and a lower cumulative percentage of drug release. The IL concentration required to prepare these emulsions was lower than the amount of conventional surfactant required, which highlights the potential synergic effects of ILs and US in preparing emulsions of hydrophobic drugs.

In Situ Generated Silver Nanodot Förster Resonance Energy Transfer Pair Reveals Nanocage Sizes

Characterizing nanocages in macromolecules is one of the keys to understanding various biological activities and further utilizing nanocages for novel materials synthesis. However, fast and straightforward detection of the nanocage size remains challenging. Here, we present a new approach to detect the diameter of a nanocage by Förster resonance energy transfer (FRET) of luminescent silver nanodot pairs with reverse micelles as a model. Silver nanodot FRET pairs can be generated in situ from a single silver nanodot species with critical energy transfer distances, R₀, of 4.8-6.5 nm. We have applied this approach to clarify the size variation of the water nanocage in nonionic surfactant Triton X-100-based reverse micelles. FRET efficiency decreases as more water is added, indicating that the size of the reverse micelles continuously expands with water content. The silver element in the nanocage also enhances the visualization of the nanocage under cryo-TEM imaging. The diameter of the water nanocage measured with the above approach is consistent with that obtained by cryo-TEM, demonstrating that the FRET measurement of silver nanodots can be a fast and accurate tool to detect nanocage dimensions. The above demonstration allows us to apply our strategy to other protein-based nanocages.

Thermally Stable Ionic Liquid-Based Microemulsions for High-Temperature Stabilization of Lysozyme at Nanointerfaces

The development of new strategies for thermal stability and storage of enzymes is very important, considering the nonretention of catalytic activity by enzymes under harsh conditions of temperature. Following this, herein, a new approach based on the interfacial adsorption of lysozyme (LYZ) at nanointerfaces of ionic liquid (IL)-based microemulsions, for enhanced thermal stability of LYZ, is reported. Microemulsions (MEs) composed of dialkyl imidazolium-based surface active ILs (SAILs) as surfactants, ILs as the nonpolar phase, and ethylene glycol (EG) as the polar phase, without any cosurfactants, have been prepared and characterized in detail. Various regions corresponding to polar-in-IL, bicontinuous, and IL-in-polar phases have been characterized using conductivity measurements. Dynamic light scattering (DLS) measurements have provided insights into the size distribution of microdroplets, whereas temperature-dependent DLS measurements established the thermal stability of the MEs. Nanointerfaces formed by SAILs with EG in thermally stable reverse MEs act as fluid scaffolds to adsorb and provide thermal stability, up to 120 °C, to LYZ. Thermally treated LYZ upon extraction into a buffer shows enzyme activity owing to negligible change in the active site of LYZ, as marked by retention of microenvironment of Trp residues present in the active site of LYZ. The present work is expected to establish a new platform for the development of novel nanointerfaces utilizing biobased components for other biomedical applications.

Small-angle neutron scattering study of a dense microemulsion system formed with an ionic liquid

Mixtures of water, octane and 1-octanol with 1-tetradecyl-3-methylimidazolium chloride (C₁₄MIM·Cl), often referred to as a surface active ionic liquid (SAIL), form water-in-oil microemulsions that have potential application as extraction media for various metal ions. Here, we present a structural study by small-angle neutron scattering (SANS) of dense microemulsions formed by surfactant-rich mixtures of these four compounds to understand how the SAIL can be used to tune the structures and properties of the microemulsions. The SANS experiments revealed that the microemulsions formed are composed of two phases, a water-in-oil microemulsion and a bicontinuous microemulsion, which becomes the dominant phase at high surfactant concentration. In this concentration regime, the surfactant film becomes more rigid, having a higher bending modulus that results from the parallel stacking of the imidazolium ring of the SAIL. At lower surfactant concentrations, the molecular packing of the SAIL does not change with the water content of the microemulsion. The results presented here correlate well with previously observed changes in the interaction between the IL cation and metal ions (Y. Tong, L. Han and Y. Yang, Ind. Eng. Chem. Res., 2012, 51, 16438-16443), while the capacity of the microemulsion system for water remains high enough for using the system as an extraction medium.

About the nanostructure of the ternary system water - [BMIm]PF6 - TX-100

HYPOTHESIS

Many efforts have been made to formulate water-IL microemulsions. One of the most intensely studied systems is H₂O - 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIm]PF₆) - 4-octylphenol polyethoxylate (TX-100) and it is not questioned that this system forms microemulsions. The nanostructures observed for traditional microemulsions are postulated with the surfactant being adsorbed at the interface such that the hydrophilic EO sides intrude into the water domains, while the hydrophobic hydrocarbon chains are immersed into [BMIm]PF₆. However, the high polarity of [BMIm]PF₆ and the observation that [BMIm]PF₆ mixes well with oligoethylene oxides but hardly with non-polar solvents like toluene or alkanes are not in line with this picture.

EXPERIMENTS

We re-studied the ternary system H₂O - [BMIm]PF₆ - TX-100 by measuring phase diagrams, determining tie-lines, and carrying out ROESY NMR and PFG NMR measurements.

FINDINGS

We found that the hydrophobic part of the surfactant interacts neither with water nor with [BMIm]PF₆, while both solvents interact with the hydrophilic part of the surfactant. We suggest that the surfactant is not adsorbed at the interface between water and the IL, but forms normal spherical or elongated micelles or even continuous aggregates with the hydrocarbon chains forming the interior of the aggregates.

Aggregation of 1-alkyl-3-methylimidazolium octylsulphate ionic liquids and their interaction with Triton X-100 micelles

Halogen-free surface active and biamphiphilic ionic liquids 1-alkyl-3-methylimidazolium octylsulphates (Cnmim C₈SO₄, n = 4, 6, 8, 10) were synthesized and their aqueous solution behaviour was studied using NMR and scattering techniques.

Structure study of a microemulsion system with an ionic liquid

A ternary mixture with an IL, C₁₄MIM·Cl, exhibits a great conformational change from single crystal to microemulsion using water.

Reversible switching of amphiphilic self-assemblies between micelles and microemulsions by a thermal stimulus

The reversible transformation between micelles and microemulsions consisting of a low critical solution temperature (LCST)-type ionic liquid was realized by a thermal stimulus for the first time.

Physicochemical behaviors of cationic gemini surfactant (14-4-14) based microheterogeneous assemblies

A comprehensive study of micellization and microemulsion formation of a cationic gemini surfactant (tetramethylene-1,4-bis(dimethyltetradecylammonium bromide; 14-4-14) in the absence or presence of hydrophobically modified polyelectrolyte, sodium carboxymethylcellulose (NaCMC), has been conducted by conductometry, tensiometry, microcalorimetry, and fluorimetry methods at different temperatures. Both critical micelle concentration and degree of ionization of the surfactant have been observed to increase with increasing temperature. The interfacial and thermodynamic parameters were evaluated. The standard Gibbs free energy of micellization (ΔGm°) is negative, which decreases with increase in temperature. Larger entropic contribution is observed compared to the enthalpy. The interaction of 14-4-14 with NaCMC produces coacervates which was determined from turbidimetry method. The pseudoternary phase behavior of the microemulsion systems comprising water (or NaCMC as additive), 14-4-14, isopropanol (IP) or n-butanol (Bu) as cosurfactant, and isopropyl myristate (IPM) were studied at 298 K. Phase diagrams reveal that IP derived microemulsions (in the absence of NaCMC) offer a large isotropic region compared to Bu-derived systems at comparable physicochemical conditions. Increasing the concentration of IP or Bu decreases the isotropic region in the phase diagram. NaCMC influences the microemulsion zone, depending upon its concentration, and type of cosurfactant and surfantant/cosurfactant ratio. Dynamic light scattering and conductometric measurements show the size of the droplet, threshold temperature of percolation, scaling parameters, and activation energy of the percolation process of 14-4-14/IP or Bu derived microemulsion systems without/with NaCMC at various physicochemical conditions. Bu exerts a greater effect to reduce θt than IP as a cosurfactant (in the absence of NaCMC) at comparable ω. On the other hand, IP showed better percolating effect than Bu in the presence of NaCMC. Bu and IP (as cosurfactant) and NaCMC (as additive) influenced the microemulsion droplet size (Dh) to different extents under comparable conditions. Temperature insensitive microemulsions have been reported at the studied temperature range (298–353 K). 14-4-14/IP (1:2)-derived microemulsion showed a fractured surface at fixed ω = 15, where ω is the water and surfactant molar ratio, and temperature (298 K); whereas, large scale mesospheres comprising multiple closely winded nanoslices and spheroid morphology were formed in 14-4-14/IP and 14-4-14/Bu microemulsions, respectively, in the presence of 0.01 g % NaCMC, at comparable conditions. These systems revealed good antimicrobial activity toward the strains of Gram-positive Bacillus subtilis and Gram-negative Escherichia coli bacteria at 298 K, and inhibitory effect was governed by ω, type of cosurfactant, and bacterial strains.

Amphiphile self-assemblies in supercritical CO2 and ionic liquids

Supercritical (sc) CO2 and ionic liquids (ILs) are very attractive green solvents with tunable properties. Using scCO2 and ILs as alternatives of conventional solvents (water and oil) for forming amphiphile self-assemblies has many advantages. For example, the properties and structures of the amphiphile self-assemblies in these solvents can be easily modulated by tuning the properties of solvents; scCO2 has excellent solvation power and mass-transfer characteristics; ILs can dissolve both organic and inorganic substances and their properties are designable to satisfy the requirements of various applications. Therefore, the amphiphile self-assemblies in scCO2 and ILs have attracted considerable attention in recent years. This review describes the advances of using scCO2 or/and ILs as amphiphile self-assembly media in the last decade. The amphiphile self-assemblies in scCO2 and ILs are first reviewed, followed by the discussion on combination of scCO2 and ILs in creating microemulsions or emulsions. Some future directions on the amphiphile self-assemblies in scCO2 and ILs are highlighted.

Aggregation behavior and electrical properties of amphiphilic pyrrole-tailed ionic liquids in water, from the viewpoint of dielectric relaxation spectroscopy

The self-aggregation behavior of amphiphilic pyrrole-tailed imidazolium ionic liquids (Py(CH₂)₁₂mim⁺Br⁻: Py = pyrrole, mim = methylimidazolium) in water is investigated by dielectric spectroscopy from 40 Hz to 110 MHz. Dielectric determination shows that the critical micelle concentration (CMC) is 8.5 mM, which is lower than that for traditional ionic surfactants. The thermodynamic parameter of the micellization, the Gibbs free energy ΔG, was calculated for Py(CH₂)₁₂mim⁺Br⁻ and compared to those of the corresponding C(n)mim⁺Br⁻ (n = 12, 14). It was found that the main driven forces of the Py(CH₂)₁₂mim⁺Br⁻ aggregation were hydrophobic interaction and π-π interactions among the adjacent Py groups. Further, the structure of aggregation was speculated theoretically that Py groups partially insert into the alkyl chains and the staggered arrangement in micelles is formed. When the concentration of Py(CH₂)₁₂mim⁺Br⁻ is higher than CMC, two remarkable relaxations which originated from diffusion of counterions and interfacial polarization between the micelles and solution, were observed at about 1.3 MHz and 55 MHz. The relaxation parameters representing the real properties of the whole system were obtained by fitting the experimental data with Cole-Cole equation. A dielectric model characterizing the structure and electrical properties of spherical micelles was proposed by which the conductivity, permittivity and the volume fraction of micelles as well as electrical properties of solution were calculated from the relaxation parameters. An intriguingly high permittivity of about 150 for the micelle was found to be a direct consequence of the strong orientational order of water molecules inside the core of micelle, and essentially is attributed to the special structure of the micelle. Furthermore, the calculation of the interfacial electrokinetic parameters of the micelles, i.e., the surface conductivity, surface charge density and zeta potential, were also achieved based on the relaxation parameters and phase parameters from higher frequency relaxation. On the basis of the results obtained, the aggregation behaviours and interfacial electrokinetic properties of the special micelles are discussed.

Nonaqueous microemulsions based on n,n'-alkylimidazolium alkylsulfate ionic liquids

The ternary system composed of the ionic liquid surfactant (IL-S) 1-butyl-3-methylimidazolium dodecylsulfate ([Bmim][DodSO4]), the room temperature ionic liquid (RTIL) 1-ethyl-3-methylimidazolium ethylsulfate ([Emim][EtSO4]), and toluene has been investigated. Three major mechanisms guiding the structure of the isotropic phase were identified by means of conductometric experiments, which have been correlated to the presence of oil-in-IL, bicontinuous, and IL-in-oil microemulsions. IL-S forms micelles in toluene, which swell by adding RTIL as to be shown by dynamic light scattering (DLS) and small-angle X-ray scattering (SAXS) experiments. Therefore, it is possible to form water-free IL-in-oil reverse microemulsions ≤10 nm in size as a new type of nanoreactor.

Probing the microstructure of nonionic microemulsions with ethyl oleate by viscosity, ROESY, DLS, SANS, and cyclic voltammetry

Microemulsions are important formulations in cosmetics and pharmaceutics and one peculiarity lies in the so-called "phase inversion" that takes place at a given water-to-oil concentration ratio and where the average curvature of the surfactant film is zero. In that context, we investigated the structural transitions occurring in Brij 96-based microemulsions with the cosmetic oil ethyl oleate and studied the influence of the short chain alcohol butanol on their structure and properties as a function of water addition. The characterization has been carried out by means of transport properties, spectroscopy, DLS, SANS, and electrochemical methods. The results confirm that the nonionic Brij 96 in combination with butanol as cosurfactant forms a U-type microemulsion that upon addition of water undergoes a continuous transition from swollen reverse micelles to oil-in-water (O/W) microemulsion via a bicontinuous region. After determining the structural transition through viscosity and surface tension, the 2D-ROESY studies give an insight into the microstructure, i.e., the oil component ethyl oleate mainly is located at the hydrophobic tails of surfactant while butanol molecules reside preferentially in the interface. SANS experiments show a continuous increase of the size of the structural units with increasing water content. The DLS results are more complex and show the presence of two relaxation modes in these microemulsions for low water content and a single diffusive mode only for the O/W microemulsion droplets. The fast relaxation reflects the size of the structural units while the slower one is attributed to the formation of a network of percolated microemulsion aggregates. Electrochemical studies using ferrocene have been carried out and successfully elucidated the structural transformations with the help of diffusion coefficients. An unusual behavior of ferrocene has been observed in the present microheterogeneous medium, giving a deeper insight into ferrocene electrochemistry. NMR-ROESY experiments give information regarding the internal organization of the microemulsion droplets. In general, one finds a continuous structural transition from a W/O over a bicontinuous to an O/W microemulsion, however with a peculiar network formation over an extended concentration range, which is attributed to the somewhat amphiphilic oil ethyl oleate. The detailed knowledge of the structural behavior of this type of system might be important for their future applications.

On the formation of new reverse micelles: a comparative study of benzene/surfactants/ionic liquids systems using UV-visible absorption spectroscopy and dynamic light scattering

The microenvironment of the polar core generated in different ionic liquid reverse micelle (IL RM) systems were investigated using the solvatochromic behavior of 1-methyl-8-oxyquinolinium betaine (QB) as an absorption probe and dynamic light scattering (DLS) technique. The novel RM systems consist of two different ILs--1-butyl-3-methylimidazolium tetrafluoroborate (bmimBF4) and 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (bmimTf2N)--sequestrated by two different surfactants--Triton X-100 (TX-100) and benzyl-n-hexadecyldimethylammonium chloride (BHDC)--in order to make IL/surfactant/benzene RMs. The effect of the variation of Ws (Ws=[IL]/[surfactant]) on the QB spectroscopy was used to characterize these nonaqueous RMs. DLS results confirm the formation of these IL RM systems because increasing Ws increases the droplet sizes. Moreover it is demonstrated that the structure of the sequestrated ILs depends strongly on the type of surfactant use to create the RMs.

Temperature-induced microstructural changes in ionic liquid-based microemulsions

In the present contribution, results concerning the effect of temperature on the nonionic surfactant Triton X-100 based 1-butyl-3-methylimidazolium tetrafluoroborate (bmimBF4)-in-cyclohexane and bmimBF4-in-toluene ionic liquid (IL) reverse microemulsions are reported. Dynamic light scattering (DLS) along with freeze-fracture transmission electron microscopy (FF-TEM) measurements revealed that the sizes of single microemulsion droplets increased with increasing temperature. However, a decreased temperature led to the appearance of droplet clusters, which have also been observed previously when the single microemulsion droplets were swollen by added bmimBF4 to a certain extent (Gao, Y. A.; Vogit, A.; Hilfert, L.; Sundmacher, K. ChemPhysChem, 2008, 9, 1603-1609). Compared to traditional aqueous microemulsions, IL microemulsions revealed relatively high temperature-independence. The droplet-shaped microstructure was always kept in a large range of temperature. The temperature-independence is ascribed to the temperature-insensitive electrostatic attraction between the solubilized bmimBF4 and Triton X-100, which was considered to be the driving force for solubilizing bmimBF4 into the cores of Triton X-100 aggregates. Two-dimensional rotating frame nuclear Overhauser effect (NOE) experiments (ROESY) further confirmed the microstructural change with temperature.