Relationship between the Broad OH Stretching Band of Methanol and Hydrogen-Bonding Patterns in the Liquid Phase

Core-shell structured alginate-based hydrogel beads modified by starch and protocatechuic acid: Preparation, characterization, phenolic slow release and stable antioxidant potential

A novel core-shell structured alginate-based hydrogel bead modified by co-gelatinizing with starch and protocatechuic acid (PA), was designed to modulate physical properties of beads, release behavior and antioxidant stability of encapsulated bioactives. Core was fabricated by ionotropic gelation, and its formulation (ratio of sodium alginate/starch) was determined by particle size/starch distribution, texture and bioactive encapsulation capacity of core. Then, coating core with shell-forming solution co-gelatinized with different doses of PA, and subsequently cross-linked with Ca2+ to obtain core-shell structured beads. Surface microstructure, mechanical characteristics, and swelling ratio of beads were affected by concentrations of PA. Besides, core-shell structure containing PA could enhance delivery and sustained release of encapsulated phenolic bioactives during in vitro digestion, and improve their antioxidant potential stability. Furthermore, interaction between PA and polysaccharide components was elucidated by FTIR and TGA. The present information was beneficial for the advancement of functional food materials and bioactive delivery systems.

Strong Dipole Moments from Ferrocene Methanol Clusters Boost Exciton Dissociation in Quantum-Confined Perovskite for CO2 Photoreduction

Perovskite nanocrystals (PCNs) exhibit a significant quantum confinement effect that enhances multiexciton generation, making them promising for photocatalytic CO2 reduction. However, their conversion efficiency is hindered by poor exciton dissociation. To address this, we synthesized ferrocene-methanol-functionalized CsPbBr3 (CPB/FcMeOH) using a ligand engineering approach. By manipulating the electronic coupling between ligands and the PCN surface, facilitated by the increased dipole moment from hydrogen bonding in FcMeOH molecules, we effectively controlled exciton dissociation and interfacial charge transfer. Under 5 h of irradiation, the CO yield of CPB/FcMeOH reached 772.79 μmol g-1, 4.95 times higher than pristine CPB. This high activity is due to the formation of hydrogen-bonded FcMeOH clusters on the CPB surface. The nonpolar disruption and strong dipole moment of FcMeOH molecules enhance electronic coupling between the FcMeOH ligands and the CPB surface, reducing the surface barrier energy. Consequently, exciton dissociation and interfacial charge transfer are promoted, efficiently utilizing multiple excitons in quantum-confined domains. Transient absorption spectroscopy confirms that CPB/FcMeOH exhibits optimized exciton behavior with fast internal relaxation, trapping, and a short recombination time, allowing photogenerated charges to more rapidly participate in CO2 reduction.

Structural, physicochemical, and digestive properties of enzymatic debranched rice starch modified by phenolic compounds with varying structures

The physicochemical properties of starch and phenolic acid (PA) complexes largely depend on the effect of non-covalent interactions on the microstructure of starch. However, whether there are differences and commonalities in the interactions between various types of PAs and starch remains unclear. The physicochemical properties and digestive characteristics of the complexes were investigated by pre-gelatinization of 16 structurally different PAs and pullulanase-modified rice starches screened. FT-IR and XRD results revealed that PA complexed with debranched rice starch (DRS) through hydrogen bonding and hydrophobic interaction. Benzoic/phenylacetic acid with polyhydroxy groups could enter the helical cavities of the starch chains to promote the formation of V-shaped crystals, and cinnamic acid with p-hydroxyl structure acted between starch chains in a bridging manner, both of which increased the relative crystallinity of DRS, with DRS-ellagic acid increasing to 20.03 %. The digestion and hydrolysis results indicated that the acidification and methoxylation of PA synergistically decreased the enzyme activity leading to a decrease in the digestibility of the complexes, and the resistant starch content of the DRS-vanillic acid complexes increased from 28.27 % to 71.67 %. Therefore, the selection of structurally appropriate PAs can be used for the targeted preparation of starch-based foods and materials.

Fructose/glycerol/water as a biosourced LTTM solvent to design a variety of sodium alginate-based soft materials with enhanced rheological properties

Sodium alginate was associated to a ternary solvent composed of fructose, glycerol, and water in a 1:1:5 M ratio (FGW), classified as a natural Low Transition Temperature Mixture (LTTM), to generate various soft materials. The rheological properties of mixtures composed of sodium alginate and FGW were thoroughly analyzed and compared to their aqueous analogues. FGW-based solutions present a pronounced shear-thinning character combined to high viscosity, up to 8000 Pa.s. The overlap concentrations and intrinsic viscosities values evidence a good solvent character of FGW for alginate polymer chains. The increase of alginate concentration in FGW leads to materials with enhanced elasticity (up to 6000 Pa) and high energy of activation (55 kJ/mol). Interestingly, the addition of divalent calcium cations in FGW according to two optimized experimental protocols, allows for the generation of never described ionotropic gels in FGW under various shapes as bulk gels or beads of gels able to encapsulate extracted vegetal actives that are used in the cosmetic industry. Thus, FGW appears as a well-suited solvent of alginate to design a broad range of new biobased soft materials.

Preparation of starch-palmitic acid complexes by three different starches: A comparative study using the method of heating treatment and autoclaving treatment

Recent research emphasizes the growing importance of starch-lipid complexes due to their anti-digestibility ability, prompting a need to explore the impact of different starch sources and preparation methods on their properties. In this study, starch-palmitic acid (PA) complexes were prepared by three different starches including Tartary buckwheat starch (TBS), potato starch (PTS), and pea starch (PS) by heating treatment (HT) and autoclaving treatment (AT), respectively, and their physicochemical property and in vitro digestibility were systematically compared. The formation of the starch-PA complex was confirmed through various characterization techniques, including scanning electron microscopy, differential scanning calorimetry, Fourier transform infrared spectroscopy, and X-ray diffraction. Among the complexes, the PTS-PA complex exhibited the highest complexation index over 80 %, while the PS-PA complex had the lowest rapid digestible starch content (56.49-59.42 %). Additionally, the complexes prepared by AT exhibited higher resistant starch content (41.95-32.46 %) than those prepared by HT (31.42-32.49 %), while the complexes prepared by HT held better freeze-thaw stability and hydration ability than those prepared by AT. This study highlights the important role of starch sources in the physicochemical and digestibility properties of starch-lipid complex and the potential application of AT in the preparation of novel resistant starch.

Spectroscopic and Computational Study of ZnCl2-Methanol Low-Melting-Temperature Mixtures

Alcoholic electrolyte mixtures have wide applications in industries. In this study, a series of mixtures composed of ZnCl2 and methanol (MeOH) with ZnCl2 mol % from 6.7 to 25 were prepared, and their spectral, structural, and thermodynamic properties were studied using infrared (IR) spectroscopy, differential scanning calorimetry (DSC), and density functional theory (DFT) calculations. The DFT-assisted analysis of excess spectra, supported by 2D-correlation spectroscopy, led to the identification of the major constituents of ZnCl2-MeOH mixtures, namely, MeOH monomer, MeOH dimer, and ZnCl2-3MeOH complex, produced after dissociation of MeOH trimer which represents the bulk methanol. The Hirshfeld charge analysis showed that in the competition between the O-H···Cl hydrogen bond (H-bond) and Zn ← O coordination bond to transfer charge in ZnCl2-MeOH complexes, the latter always dominates, making MeOH positively charged. The phase diagram of the binary system showed the presence of V-shaped glass transition temperatures (Tg), characteristic of low-melting mixture solvents (LoMMSs). The present study provides insights into the microscopic properties of the system and sheds light on the understanding of the general principles to prepare deep-eutectic solvents (DESs) or LoMMSs using inorganic salts and alcoholic compounds.

Ultrasonic-assisted binding of canistel (Lucuma nervosa A.DC) seed starch with quercetin

In order to provide a reference for improving the physicochemical properties of starch, the study of starch polyphenol complex interaction has aroused considerable interest. As a common method of starch modification, ultrasound can make starch granules have voids and cracks, and make starch and polyphenols combine more closely. In this research, canistel seed starch was modified by ultrasonic treatment alone or combined with quercetin. The molecular structure, particle characteristics and properties of starch were evaluated. With the increase of ultrasonic temperature, the particle size of the dextrinized starch granules increased, but the addition of quercetin could protect the destruction of starch granule size by ultrasonic; X-ray diffraction and infrared spectra indicated that quercetin was bound to the surface of canistel seed starch through hydrogen bonding, and the complex and the original starch had the same crystal structure and increased crystallinity; by molecular simulation, quercetin bound inside the starch molecular helix preserved the crystalline helical configuration of starch to some extent and inhibited the complete unhelicalization of starch molecules. Meanwhile, hydrogen bonding was the main driving force for the binding of starch molecules to quercetin, and van der Waals interactions also promoted the binding of both. In the physicochemical properties, as the temperature increased after the combination of ultrasonic modified starch combined with quercetin, the solubility, swelling force and apparent viscosity of the compound increased significantly, and it has higher stability and shear resistance.

Hydrogen-Bond Configurations of Hydration Water around Glycerol Investigated by HOH Bending and OH Stretching Analysis

Toward a comprehensive understanding of the mechanism of glycerol as a moisturizer, studies on the hydrogen-bond (HB) structure of hydration water, which is known to be disordered by glycerol, are insufficient. To this aim, we evaluated the HB configurations based on the HOH bending and OH stretching spectra of the hydration water from those of glycerol/water mixtures by subtracting the contributions of bulk water and glycerol using dielectric relaxation spectroscopy. Analysis of the HOH bending band showed that hydration water-donating HBs lose the intermolecular bending coupling with increasing glycerol by replacing the water-water HBs with water-glycerol HBs. The OH stretching band provided more detailed insight into the HB configuration, indicating that the double-donor double-acceptor and double-donor single-acceptor configurations in bulk water change to a predominantly double-donor single-acceptor configuration in hydration water around glycerol. The formation of more donor HBs than acceptor HBs may be due to the steric constrains by glycerol and/or differences in the partial charge on the oxygen atom between water and glycerol.

The effects of methanol clustering on methanol–water nucleation

The formation of subcritical methanol clusters in the vapor phase is known to complicate the analysis of nucleation measurements. Here, we investigate how this process affects the onset of binary nucleation as dilute water–methanol mixtures in nitrogen carrier gas expand in a supersonic nozzle. These are the first reported data for water–methanol nucleation in an expansion device. We start by extending an older monomer–dimer–tetramer equilibrium model to include larger clusters, relying on Helmholtz free energy differences derived from Monte Carlo simulations. The model is validated against the pressure/temperature measurements of Laksmono et al. [Phys. Chem. Chem. Phys. 13, 5855 (2011)] for dilute methanol–nitrogen mixtures expanding in a supersonic flow prior to the appearance of liquid droplets. These data are well fit when the maximum cluster size imax is 6–12. The extended equilibrium model is then used to analyze the current data. On the addition of small amounts of water, heat release prior to particle formation is essentially unchanged from that for pure methanol, but liquid formation proceeds at much higher temperatures. Once water comprises more than ∼24 mol % of the condensable vapor, droplet formation begins at temperatures too high for heat release from subcritical cluster formation to perturb the flow. Comparing the experimental results to binary nucleation theory is challenged by the need to extrapolate data to the subcooled region and by the inapplicability of explicit cluster models that require a minimum of 12 molecules in the critical cluster.

Vibrational mode analysis of hydrogen-bonded organic frameworks (HOFs): synchrotron infrared studies

Hydrogen-bonded organic frameworks (HOFs) are a promising class of porous crystalline materials for gas sorption and gas separation technologies that can be constructed under mild synthetic conditions. In forming three-dimensional networks of flexible hydrogen bonds between donor/acceptor subunits, these materials have displayed high stability at elevated temperature and under vacuum. Although the structural properties of HOFs are commonly characterized by diffraction techniques, new complimentary methods to elucidate phase behaviour and host-guest interactions at the molecular level are sought, particularly those that can be applied under changing physical conditions or solvent environment. To this end, this study has applied synchrotron far-IR and mid-IR spectroscopy to probe the properties of two known and one new HOF system assembled from tetrahedral amidinium and carboxylate building blocks. All three frameworks produce feature-rich and resolved infrared profiles from 30 to 4000 cm^-1 that provide information on hydrogen-bonded water solvent networks and the HOF channel topography via lattice and torsional bands. Comparison of experimental peaks to frequencies and atomic displacements (eigenvectors) predicted by high-level periodic DFT calculations have allowed for the assignment of vibrational modes associated with the aforementioned physicochemical properties. Now compiled, the specific vibrational modes identified as common to charge-assisted hydrogen-bonding motifs, as well as low frequency lattice and torsional bands attributed to HOF pore morphology and water-of-hydration networks, can act as diagnostic features in future spectroscopic investigations of HOF properties, such as those toward the design and tuning of host-guest properties for targeted applications.

Study on imperatorin extracted from Angelica dahurica and its UV photocatalytic reaction with collagen

Soxhlet extraction method was used to extract imperatorin from Angelica dahurica, and the extraction ratio under different extraction condition was optimized to attain the best condition. Then, XAD-16 macroporous resin was selected as the optimal resin to boost the extraction ratio of imperatorin. Afterwards, the higher purity of imperatorin (96.84±0.2%) was separated by preparative HPLC system. Next, the photocatalytic reaction between the above imperatorin and collagen which the highest levels in skin was investigated using UV-vis spectroscopy, amino acid analysis and HPLC analysis. The results showed that imperatorin reacted with collagen only under ultraviolet light which caused the denaturation of collagen, and three new products were generated. The ultraviolet products were isolated by preparative HPLC system and separately detected by high-resolution mass spectrum. The possible UV photocatalytic reaction mechanism between imperatorin and collagen is that ultraviolet light induces the increase of the activity of the imperatorin to react with the tyrosine in the collagen, resulted in the denaturation of collagen and reestablish of the normal epidermal tissue in skin.

Structures, binding energies and non-covalent interactions of furan clusters

Understanding of the furan solvent is subjected to the knowledge of the structures of the furan clusters and interactions taking place therein. Although, furan clusters can be very important to determine the dynamics and the properties of the furan solvent, there has been only a few investigations reported on furan dimer. In this work, we have explored the potential energy surfaces (PESs) of the furan clusters using two incremental levels of theory. Structures have been initially generated using classical molecular dynamics followed by full optimization at the MP2/aug-cc-pVDZ level of theory. The results show that the most stable structure of the furan dimer has a stacking configuration while that of the trimer has a cyclic configuration. We have noted that the structures of the furan tetramer have no definite configurations. In addition, we have performed a quantum theory of atoms in molecule (QTAIM) analysis to identify all possible non-covalent interactions of the furan clusters. The results show that six different types of non-covalent interactions can be identified in furan clusters. We have noted that the CH⋯C and CH⋯O hydrogen bondings are the strongest non-covalent interactions while the H⋯H bonding interaction is found to be the weakest. Furthermore, we have assessed the performance of ten DFT functionals in calculating the binding energies of the furan clusters. The ten DFT functionals (M05, M05-2X, M06, M06-2X, M08HX, PBE0, ωB97XD, PW6B95D3, APFD and MN15) have been benchmarked to DLPNO-CCSD(T)/CBS. The functionals M05-2X and M06 are recommended for further affordable investigations of the furan clusters.

Temperature-dependent oxidation of BSCAPE molecule in methanol medium

Temperature-dependent solvation free energy and oxidation by free energy of ionization of 2-Phenylethyl (2E)-3-(1-benzenesulfonyl-4,5-dihydroxyphenyl) acrylate (BSCAPE) in methanol medium are the concerns of the present work. This molecule is a relevant phenolic acid enclosing multiple bioactivities. The explicit, implicit and discrete-continuum models of solvation were used. The methanol molecules were coordinated to this acid to form cluster complexes. The dual method M06-2X/6-31++G(d,p)//B3LYP/6-31G(d) was employed along with basis set superposition error correction. The results show that, the free energy of coordination and solvation are distant. Both quantities increase with temperature. From discrete-continuum treatment, there is non-spontaneity of solvation process, while coordination yielded spontaneity and non-spontaneity at cold and hot room temperatures, respectively. The ionization potential in gas phase, decreases with temperature. All the solvation models yielded lower ionization potential than that of gas phase. Thus, it follows that, the increase of temperature and methanol medium favours the oxidation of BSCAPE. Consequently, this favours its metabolism processes.

Infrared spectra of PEHA molecule and its resistance to oxidation in water and methanol media at 298.15 K: solvent cluster size dependency

The present work investigates the infrared spectra and solvation free energies (SE) of PEHA ((E)-2-(Pyridin-2-yl) ethyl 3-(3,4-dihydroxyphenyl) acrylate) and their impact on the oxidation. The latter was examined through the ionization potential parameter (IP). These investigations were carried out by the DFT method at B3LYP/6-31G(d) for optimization and frequency calculations and corrected for BSSE. X3LYP/6-311++G(2d,2p) was employed for single-point energy calculations. Water and methanol cluster sizes were used for solvation through the explicit solvent model. Thus, the infrared spectra show that the overview frequencies of PEHA compare well with the experimental results. The intense infrared absorptions of complexes are due to the stretching of O-H bonds of solvent clusters in the range 2600-3850 cm^-1. The binding energy per solvent molecule of complexes was calculated and shows that water and methanol clusters mimic the liquid state as from 5 to 10 solvent molecules. The SE of PEHA increases with the increase of the cluster size of water and methanol in the direction of the limit. The latter was censured by the solvation done using the combined explicit-implicit solvent model. As for IP parameter, the results are largely above the IP limit and lower than the IP from gas phase. Thus, water and methanol media have an effect of lowering the IP of PEHA compound. Consequently, both media favour the oxidation of PEHA molecule, which facilitates its metabolism in human organism.

Quantitative Analysis of Infrared Spectra of Binary Alcohol + Cyclohexane Solutions with Quantum Chemical Calculations

Hydrogen bonding has profound effects on the behavior of molecules. Fourier-transform infrared spectroscopy is the technique most commonly used to qualitatively identify hydrogen-bonding moieties present in a chemical sample. However, quantitative analysis of infrared (IR) spectra is nontrivial for the hydroxyl stretching region where hydrogen bonding is most prominently expressed in organic alcohols and water. Specifically, the breadth and extreme overlap of the O-H stretching bands, and the order of magnitude variability of their IR attenuation coefficients complicates the analysis. In the present work, sequential molecular dynamics simulations and quantum mechanical calculations are used to develop a function to relate the integrated IR attenuation coefficient to the vibrational frequencies of hydroxyl bands across the O-H stretching region. This relationship is then used as a guide to develop an attenuation coefficient scaling function to quantitatively determine concentrations of alcohols in a hydrocarbon solution from experimental IR spectra by integration across the entire hydroxyl frequency range.

The conformation of chloramphenicol in the ordered and disordered phases

The conformational behavior of chloramphenicol (CHL) in the solid, liquid and vapor phases is revisited here by means of FTIR spectroscopy and QM methods. In the crystalline phase, both the IR analysis and QM computations discard the conformer proposed by Acharya et al. (Acta Cryst., 1979, B35:1360-1363) and support the one proposed by Chatterjee et al. (J. Cryst. Mol. Struct., 1979, 9:295-304), characterized by an intramolecular OH⋯O hydrogen bond in which the primary hydroxyl group acts as hydrogen bond donor. The conformational behavior of CHL in the liquid and gas phases has been analyzed using QM calculations. The Self-Consistent Reaction Field (SCRF) method with the Onsager solvation model has been used for the initial optimizations in solution, and the lowest energy conformers have been refined using the Solvation Model based on Density (SMD). In solution environment the intramolecular OH⋯O hydrogen bond in CHL is reversed so that the secondary hydroxyl group acts as hydrogen bond donor. In addition, the dichloroacetamide group folds back further over the phenyl ring to form an intramolecular CCl⋯π halogen bond. Two different halogen bonds are actually observed (each one with a different chlorine atom) resulting in two different stable conformers, that can be detected by FTIR spectroscopy due to the conformational sensitivity of the CO group to the conformation of the dichloroacetyl group. Finally, the stability of the conformers with the polarity of the medium is also discussed.

Hydrogen-bond pattern to characterize water network

Hydrogen-bond (HB) patterns correspond to topologically distinct isomers of water clusters, and can be expressed by digraphs. The HB pattern is used to divide the configuration space of water cluster at a finite temperature. The populations of the HB patterns are transformed into the relative Helmholtz energies. The method is based on the combination of molecular simulation with graph theory. At a finite temperature it can be observed that other isomers than local minimum structures on the potential energy surface are highly populated. The dipole moment of a constituent molecule in a water cluster is enhanced depending on the local HB network around the water molecule. Rooted digraph is used to represent topologically distinct isomers of protonated water (PW) clusters. O–H bonds of PW clusters are classified into 10 topological types based on the combination of the local HB types of the contributing water molecules to the O–H bond. If the topological type is the same, vibrational frequencies of those O–H bonds of PW clusters are similar even in different isomers; i.e. vibrational frequency of O–H bond is transferable, and can be used as a vibrational spectral signature of PW clusters.

Chain length effects on the vibrational structure and molecular interactions in the liquid normal alkyl alcohols

Alkyl alcohols are widely used in academia, industry, and our everyday lives, e.g. as cleaning agents and solvents. Vibrational spectroscopy is commonly used to identify and quantify these compounds, but also to study their structure and behavior. However, a comprehensive investigation and comparison of all normal alkanols that are liquid at room temperature has not been performed, surprisingly. This study aims at bridging this gap with a combined experimental and computational effort. For this purpose, the alkyl alcohols from methanol to undecan-1-ol have been analyzed using infrared and Raman spectroscopy. A detailed assignment of the individual peaks is presented and the influence of the alkyl chain length on the hydrogen bonding network is discussed. A 2D vibrational mapping allows a straightforward visualization of the effects. The conclusions drawn from the experimental data are backed up with results from Monte Carlo simulations using the simulation package Cassandra.

Solvation energies of the proton in methanol revisited and temperature effects

Various functionals assessing solvation free energies and enthalpies of the proton in methanol.

A comparative study of ibuprofen and ketoprofen glass-forming liquids by molecular dynamics simulations

In this paper, structural and dynamical properties of ibuprofen and ketoprofen glass-forming liquids have been investigated by means of molecular dynamics simulations. Molecular mobility of both materials is analyzed with respect to the different inter-molecular linear/cyclic hydrogen bonding associations. For ibuprofen, the dominant organization is found to be composed of small hydrogen bonding aggregates corresponding to cyclic dimers through the carboxyl group. For ketoprofen, the propensity of cyclic dimers is significantly reduced by the formation of hydrogen bonds with the ketone oxygen of the molecule altering the hydrogen bond (HB) associating structures that can be formed and thus molecular dynamics. The issue of the presence/absence of the peculiar low frequency Debye-type process in dielectric relaxation spectroscopy (DRS) data in these materials is addressed. Results obtained from simulations confirm that the Debye process originates from the internal cis-trans conversion of the -COOH carboxyl group. It is shown that the specific intermolecular HB structures associated to a given profen control the main dynamical features of this conversion, in particular its separation from the α-process, which make it detectable or not from DRS. For ibuprofen, the possible role of the -CCCO torsion motion, more "local" than the -COOH motion since it is less influenced by the intermolecular HBs, is suggested in the microscopic origin of the quite intense secondary γ-relaxation process detected from DRS.

Structures and relative stabilities of ammonia clusters at different temperatures: DFT vs. ab initio

The global minimum energy structures of (NH₃)_n=2–10are pointed out for the first time at a given temperature.

Liquid 1-propanol studied by neutron scattering, near-infrared, and dielectric spectroscopy

Liquid monohydroxy alcohols exhibit unusual dynamics related to their hydrogen bonding induced structures. The connection between structure and dynamics is studied for liquid 1-propanol using quasi-elastic neutron scattering, combining time-of-flight and neutron spin-echo techniques, with a focus on the dynamics at length scales corresponding to the main peak and the pre-peak of the structure factor. At the main peak, the structural relaxation times are probed. These correspond well to mechanical relaxation times calculated from literature data. At the pre-peak, corresponding to length scales related to H-bonded structures, the relaxation times are almost an order of magnitude longer. According to previous work [C. Gainaru, R. Meier, S. Schildmann, C. Lederle, W. Hiller, E. Rössler, and R. Böhmer, Phys. Rev. Lett. 105, 258303 (2010)] this time scale difference is connected to the average size of H-bonded clusters. The relation between the relaxation times from neutron scattering and those determined from dielectric spectroscopy is discussed on the basis of broad-band permittivity data of 1-propanol. Moreover, in 1-propanol the dielectric relaxation strength as well as the near-infrared absorbance reveal anomalous behavior below ambient temperature. A corresponding feature could not be found in the polyalcohols propylene glycol and glycerol.

Hydrogen-bonds structure in poly(2-hydroxyethyl methacrylate) studied by temperature-dependent infrared spectroscopy

Hydrogen-bonds structure in poly(2-hydroxyethyl methacrylate) (PHEMA) were investigated by means of temperature-dependent infrared (IR) spectroscopy. Spectral variations involved with the OH…OH and C=O…HO types of hydrogen-bonds were found around the glass transition temperature of 80°C. Hydrogen-bonds among the hydroxyl groups gradually dissociate with increasing temperature. In contrast, discontinuous variation in the carbonyl bands was observed around the glass transition temperature. An association of the C=O…HO type of hydrogen-bond with increasing temperature above the glass transition temperature was revealed. These were concluded from the present study that hydrogen-bonds among the hydroxyl groups in each side chain terminal suppress the main chain mobility in the polymer matrix below the glass transition temperature, while the dissociation of the OH…OH type of hydrogen-bonds induces the association of the C=O…HO type of hydrogen-bond. As a result, the mobility of the main chain is induced by the change in hydrogen-bonds structure at the glass transition temperature.

Solvation Energies of the Proton in Methanol

pKa's, proton affinities, and proton dissociation free energies characterize numerous properties of drugs and the antioxidant activity of some chemical compounds. Even with a higher computational level of theory, the uncertainty in the proton solvation free energy limits the accuracy of these parameters. We investigated the thermochemistry of the solvation of the proton in methanol within the cluster-continuum model. The scheme used involves up to nine explicit methanol molecules, using the IEF-PCM and the strategy based on thermodynamic cycles. All computations were performed at B3LYP/6-31++G(dp) and M062X/6-31++G(dp) levels of theory. It comes out from our calculations that the functional M062X is better than B3LYP, on the evaluation of gas phase clustering energies of protonated methanol clusters, per methanol stabilization of neutral methanol clusters and solvation energies of the proton in methanol. The solvation free energy and enthalpy of the proton in methanol were obtained after converging the partial solvation free energy of the proton in methanol and the clustering free energy of protonated methanol clusters, as the cluster size increases. Finally, the recommended values for the solvation free energy and enthalpy of the proton in methanol are -257 and -252 kcal/mol, respectively.