Solubilization of Naphthalene in the Presence of Plant−Synthetic Mixed Surfactant Systems

Remediation of oil-polluted soil using anionic and non-ionic composite biosurfactants

Petroleum hydrocarbons as pervasive pollutants pose a significant threat to soil ecology and human health. Surfactant washing as an established technique can effectively remediate soils contaminated by hydrocarbons. Biosurfactants, which combine the properties of surfactants and environmental compatibility, have attracted increasing interest. However, due to the high production cost of biosurfactants, their practical application is restricted. This study addressed these limitations by selecting two biosurfactants, β-cyclodextrin (C1) and sodium carboxymethyl cellulose (C2), and developed a promising cleaning agent formula through compounding and the addition of suitable additives. When the volume ratio of C1 to C2 was 8:2 and an 8 g/L mixture of sodium humate and sodium carbonate electrolyte was added, the surfactant system's surface tension reached a minimum, yielding optimal oil removal. The formation and synergistic behaviour of mixed micelles of surfactants were explained using ideal solution theory and the Rubingh model. By optimising the oil washing process parameters - normal temperature of 25 °C, pH 11, washing time of 2 h, solid-liquid ratio of 1:5, and oscillation frequency of 200 r/min - the oil removal rate achieved 76%. This cleaning agent, characterised by low production cost, straightforward application, environmental compatibility, and rapid, significant cleaning effect, shows potential for field-scale purification of petroleum-contaminated soil.

Experimental upscaling analyses for a surfactant-enhanced in-situ chemical oxidation (S-ISCO) remediation design

Surfactant-enhanced in-situ chemical oxidation (S-ISCO) is an emerging innovative remediation technology for the treatment of dense non-aqueous phase liquids (DNAPLs). S-ISCO combines the solubilization of contaminants by means of surfactants with the chemical oxidation by an oxidizing agent, thus, potentially increasing the efficiency of the state-of-the-art ISCO technique. Scientific investigations are needed to enable the technology transfer for potential field applications based on the development of a remediation design under well-defined boundary conditions. For this purpose, experimental upscaling analyses were performed using the special infrastructure of the research facility for subsurface remediation (VEGAS). Batch tests showed that oxidation of the selected surfactant E-Mulse 3® (EM3) by activated persulfate (Na-PS) reduced the solubilization of the model contaminants 1,4-DCB, naphthalene, and PCE. As a consequence, the processes of contaminant solubilization and degradation were temporally and spatially separated in the developed remediation design. A proof of concept was provided by performing an S-ISCO medium-scale experiment (100 cm length, 70 cm height, 12.5 cm width), with 1,2-DCB as model DNAPL contaminant to be treated. A groundwater circulation well (GCW) was used to inject a 60 g/L Na-PS solution and to effectively mix the reagents. Sampling of the experiment's outflow and the soil material after treatment showed that neither rebound effects nor residual mass loadings on the soil material could be detected after termination of the S-ISCO treatment. To further evaluate the S-ISCO remediation design under field-like conditions, a large-scale S-ISCO experiment was conducted (6 m length, 3 m height, 1 m width), allowing for an extensive sampling campaign to monitor relevant processes. An efficient contaminant removal from the former source zone could be reached by surfactant solubilization, decreasing contaminant levels from initially over 2000 mg/L 1,2-DCB to final concentrations below 5 mg/L 1,2-DCB. The heterogeneously distributed contaminant degradation, implemented by a three-filter GCW, was attributed to density-induced migration processes that impeded an optimal reaction zone. A density-dependent numerical transport could qualitatively match the observations. By comparing different simulation scenarios, an adapted operation of the GCW was established that provides for a more efficient distribution of the density-influenced oxidant injection.

Study on the thermal washing of oily sludge used by rhamnolipid/sophorolipid binary mixed bio-surfactant systems

Demulsification and crude oil desorption are usually a necessary step for the treatment of oily sludge in the petroleum industry. In this study a binary mixed bio-surfactant (rhamnolipid / sophorolipid, RL/SL) was used to strengthen the removing oil efficiency for oily sludge by thermal washing method. Surface tension values of the single and the mixed surfactants were carried out to investigate the effect of mixing systems on reducing critical micelle concentrations (CMC) value. The models proposed by Clint, Rubingh and Gibbs et al. had been employed to interpret the formation of mixed micelles and synergism and found out in case of the mass ratios of 4:6 the synergism was the strongest in RL and SL mixed surfactant systems, which was selected as the washing agents to treat the oily sludge produced from Huabei oilfield. Through the optimization of oil washing process parameters, the oil removal rate reached the maximum value (95.66%, residual oil rate 1.98%) at the condition of heating temperature of 45 °C, detergents concentration of 500 mg/L, washing time of 3 h, liquid/solid mass ratio of 1:4, stirring speed of 300 r/min, and washing 4 times. The factors affecting the oil washing effect were analyzed from the composition and performance characteristics of oily sludge samples, washing oil system and washing process parameters. The results showed that low oil content of oily sludge, small specific surface area, strong wetting and solubilization of the oil-washing system all can increase the oil-washing effect and the washing time and temperature had a great influence on the oil-washing effect. Compared with the results of other researchers, the oil washing temperature and the concentration of oil washing agent were significantly lower and high oil removal rate and low residual oil rate were obtained in this study. It was confirmed that thermal oil washing method using RT/SL binary bio-surfactant mixing system was proved to a high-efficiency, low-consumption and wide range of applications technology.

Study on the treatment of oily sludge in oil fields with lipopeptide/sophorolipid complex bio-surfactant

A systematic study had been carried out to get insight into the micellar behavior of anionic lipopeptide (LT) and nonionic sophorolipid (SL) in their different mass ratio mixed state using the technique of tensiometry. The models proposed by Clint, Rubingh and Gibbs et al. had been employed to interpret the formation of mixed micelles and found out synergism. The obtained experimental critical micelle concentrations (CMC) were lower than the ideal CMCs, indicating negative deviation from ideal behavior for all multi-component mixed micelles formation. A suited binary bio-surfactant mixing system was selected as the washing agents to treat the oily sludge produced from Huabei oilfield by the thermal bio-surfactant washing method. The results showed that in case of the mass ratios of 8:2 the CMC was dramatically decreased and synergism was the strongest in LT and SL bi mixed surfactant systems. The studied binary mixed bio-surfactant system showed higher washing efficiency for oily sludge than single surfactant system. In addition, the washing power of binary mixed bio-surfactants towards oily sludge was the best at below washing conditions: (a) the concentration of the mixed system (100 mg/L), (b) temperature (55 ℃), (c) ratio of sludge/liquid (1:3), (d) washing time (3 h), and (e) stirring speed (300 rpm). Certainly, the washing abilities of the selected surfactants not only depend on their mixing ratio and washing conditions but also associate with microstructure and mineral components of oily sludge.

Synergistic Solubilization of Phenanthrene by Mixed Micelles Composed of Biosurfactants and a Conventional Non-Ionic Surfactant

This study investigated the solubilization capabilities of rhamnolipids biosurfactant and synthetic surfactant mixtures for the application of a mixed surfactant in surfactant-enhanced remediation. The mass ratios between Triton X-100 and rhamnolipids were set at 1:0, 9:1, 3:1, 1:1, 1:3, and 0:1. The ideal critical micelle concentration values of the Triton X-100/rhamnolipids mixture system were higher than that of the theoretical predicted value suggesting the existence of interactions between the two surfactants. Solubilization capabilities were quantified in term of weight solubilization ratio and micellar-water partition coefficient. The highest value of the weight solubilization ratio was detected in the treatment where only Triton X-100 was used. This ratio decreased with the increase in the mass of rhamnolipids in the mixed surfactant systems. The parameters of the interaction between surfactants and the micellar mole fraction in the mixed system have been determined. The factors that influence phenanthrene solubilization, such as pH, ionic strength, and acetic acid concentration have been discussed in the paper. The aqueous solubility of phenanthrene increased linearly with the total surfactant concentration in all treatments. The mixed rhamnolipids and synthetic surfactants showed synergistic behavior and enhanced the solubilization capabilities of the mixture, which would extend the rhamnolipids application.

Sustainable and Efficient Route for the Regeneration of Carbonyl Compounds from Oximes Using Aqueous Extract of Sapindus laurifolia under Microwave Radiation

The synthesis of organic compounds using aqueous medium has become an indispensable tool for modern chemical synthesis strategies because of its ability to produce pure products with higher yield at ambient temperature. The conversion of oxime group into carbonyl group serves as a key step for several organic syntheses. This article describes the regeneration of carbonyl compounds from the oxime group present in various carbon skeletons using I₂ and aqueous extract of Sapindus laurifolia under microwave radiation. A correlation has been established between the critical micellar concentration of saponin extracted from Sapindous laurifolia and the yield percentage of regenerated different carbonyl compounds. An effortless, competent, and environmentally compassionate protocol for the regeneration of carbonyl compound with a high percent of yield in the range 45-95% could be achieved.

Study on surface properties of sodiumdodecyl sulfate and dodecyltrimethylammonium bromide mixed surfactants and their interaction with dyes

The antagonistic as well as synergetic interaction for dodecyltrimethylammonium bromide (DTAB) and sodiumdodecyl sulfate (SDS) mixed surfactants by using surface tension are investigated on the basis of the results obtained earlier, the efficiency of adsorption (pC₂₀), aggregation number (N), ΓΓmax, effective Gibbs free energy (ΔGeffo) and CMCC20 are calculated additionally with three different temperatures at T = 293.15, 298.15 and 303.15 K as the detailed surface properties. The binding constants and standard free energy change of SDS and DTAB mixture with the interaction of (2.5× 10⁻⁵ mol L^–1 of methyl orange, MO and methylene blue, MB) are carried out by using UV-Vis spectroscopy at room temperature by using different models. The closer values of the binding constants and standard free energy change for SDS and DTAB mixture with the interaction of MO and MB are included in our investigations.

Extraction of consortium of hydrolytic enzymes from waste activated sludge using ultrasonication and stirring with surfactants

In the present study, the consortium of hydrolytic enzymes namely protease, α-amylase, lipase, cellulase and α-glucosidase were extracted from sludge flocs of municipal returned waste activated sludge (MRWAS) and different proportion of mixed sludge namely (MRWAS) and pulp and paper sludge using ultrasonication and stirring with TX100 (Triton X100) and AOT (Dioctyl sodium sulphosuccinate). Ultrasonication with specific energy of 27,027kJ/kg TS with duration 10min was optimized to get maximum activity of enzymes. Mixed sludge with ratio (55:75) had yielded more enzymes activity than the municipal returned waste activated sludge. Further, enzymes extraction efficiency by stirring using TX100, AOT and ultrasonication combined with TX00 and AOT methods were investigated in an optimized mixed sludge ratio (55:75) with varying dosage and stirring or sonication time. In stirring method, the optimum dosage and time of (1% v/v, 60min) and (2% v/v, 180min) respectively were obtained for TX100 and AOT. In ultrasonication method, the optimum dosage of TX100 (1% v/v) and AOT (2% v/v) were obtained at an optimized specific energy of 27,027kJ/kg for 10min. Among the extraction methods, ultrasonication combined with TX100 method exhibited maximum activity of protease, α-amylase, cellulase, lipase and α-glucosidase and these were predicted to be respectively 43.6, 54.4, 34.7, 23, 12.5Units/g VSS. It was concluded that ultrasonication combined with TX100 method is more suitable as it requires a short time and minimum dosage adequate to extract maximum activity of consortium enzymes from sludge flocs, which is essential for the enzymes to be recovered.

Solubilization of Polycyclic Aromatic Hydrocarbons by Single and Binary Mixed Rhamnolipid-Sophorolipid Biosurfactants

Biosurfactants are promising additives for surfactant enhanced remediation (SER) technologies due to their low toxicity and high biodegradability. To develop green and efficient additives for SER, the aqueous solubility enhancements of polycyclic aromatic hydrocarbons (PAHs; naphthalene, phenanthrene, and pyrene) by rhamnolipid (RL) and sophorolipid (SL) biosurfactants were investigated in single and binary mixed systems. The solubilization capacities were quantified in terms of the solubility enhancement factor, molar solubilization ratio (MSR), and micelle-water partition coefficient (). Rughbin's model was applied to evaluate the interaction parameters (β) in the mixed RL-SL micelles. The solubility of the PAHs increased linearly with the glycolipid concentration above the critical micelle concentration (CMC) in both single and mixed systems. Binary RL-SL mixtures exhibited greater solubilization than individual glycolipids. At a SL molar fraction of 0.7 to 0.8, the solubilization capacity was the greatest, and the MSR and reached their maximum values, and β values became positive. These results suggest that the two biosurfactants act synergistically to increase the solubility of the PAHs. The solubilization capacity of the RL-SL mixtures increased with increasing temperature and decreased with increasing salinity. The aqueous solubility of phenanthrene reached a maximum value at pH of 5.5. Moreover, the mixed RL-SL systems exhibited a strong ability to solubilize PAHs, even in the presence of heavy metal ions. These mixed biosurfactant systems have the potential to improve the performance of SER technologies using biosurfactants to solubilize hydrophobic organic contaminants by decreasing the applied biosurfactant concentration, which reduces the costs of remediation.

Anti-Malassezia furfur activity of natural surfactant mediated in situ silver nanoparticles for a better antidandruff shampoo formulation

Anin situone pot synthesis of Ag nanoparticles in aqueousAcaciaplant-surfactant media can be useful as a good anti-dandruff shampoo.

Solubilization of n-alkylbenzenes into gemini surfactant micelles in aqueous medium

Solubilization of benzene, toluene, ethylbenzene, n-propylbenzene, n-butylbenzene, and n-pentylbenzene into micelles of decanediyl-1-10-bis(dimethyltetradecylammonium bromide) (14-10-14,2Br(-)) has been investigated in the temperature range from 288.2 to 308.2 K. The equilibrium concentrations of all the solubilizates are determined spectrophotometrically. The concentration of the solubilizates remains constant below the critical micelle concentration (cmc) and increases linearly with an increase in 14-10-14,2Br(-) concentration above the cmc. Compared to the mother micelle, the solubilized micelles indicate much larger hydrodynamic diameters, which are determined by dynamic light scattering. Therefore, the Gibbs energy change for the solubilization of n-alkylbenzenes has been evaluated by the partitioning of the solubilizates between the aqueous and micellar phases. Furthermore, the enthalpy and entropy changes for the solubilization could be calculated from temperature dependence of the Gibbs energy change. From the thermodynamic parameters, it is found that the solubilization for the present system is entropy-driven and that the location of the solubilizates moves into the inner core of the micelle with an elongation of their alkyl chains. The movement on the location is also supported by the results of absorption spectra, Fourier transform infrared (FTIR) spectra, and two-dimensional nuclear Overhauser effect spectroscopy (2-D NOESY).

Enhanced aqueous solubility of naphthalene and pyrene by binary and ternary Gemini cationic and conventional nonionic surfactants

A systematic study has been carried out to get insight into the micellar behavior of Gemini cationic and conventional nonionic in their single as well as equimolar bi and ternary mixed state using the technique of tensiometry. The models proposed by Clint, Rubingh and Motomura et al. have been employed to interpret the formation of mixed micelles and find out synergism. The obtained experimental CMCs are lower than the ideal CMCs, indicating negative deviation from ideal behavior for all multi-component mixed micelles formation. The solubilization capacities of selected equimolar bi and ternary surfactant systems towards polycyclic aromatic hydrocarbons (PAHs), naphthalene and pyrene, have been evaluated from measurements of the molar solubilization ratio (MSR), the micelle-water partition coefficient (K(m)), the deviation ratio (R) and the free energy of solubilization (ΔG(s)(0)) of PAHs. The results show that the solubility of naphthalene and pyrene over that in water in case of Gemini cationic surfactant is dramatically enhanced by adding equimolar nonionic surfactant in both bi and ternary mixed surfactant systems. The studied equimolar ternary surfactant system shows higher solubilizing efficiency than Gemini cationic binary system but lower than their cationic-nonionic counterpart. In addition, the solubilizing power of multi-component mixed surfactants towards naphthalene and pyrene increases with increasing logK(ow) of PAHs. Certainly, the solubilization abilities of the selected surfactants not only depend on their structure and mixing effect but also associate with solubilizing microenvironment and chemical nature of organic solutes.

Investigation on the solubilization of polycyclic aromatic hydrocarbons in the presence of single and mixed Gemini surfactants

Water solubility enhancements of naphthalene (Naph), phenanthrene (Phen) and pyrene (Py) by a series of single cationic Gemini surfactants (CG(s), s=4, 8, 12 and 16) as well as their equimolar binary combinations (CG(12-m), m=4, 8 and 16) have been investigated. The relationships between their surface properties and solubilizing capacities toward three polycyclic aromatic hydrocarbons (PAHs) have been quantified and discussed. The selected single Gemini surfactants observably enhance the water solubility of PAHs following the order of Phen>Py>Naph except for CG(8) which has a superior solubilizing ability for Py. For the same organic compound, the solubilizing abilities of single Gemini surfactants are in tune with the order of variation tendencies of CMC values. However, the different mixed Gemini surfactant systems have shown selective solubilization on various PAHs which is not simply related to their mixed molar properties. Particularly, the CG(12-16) surfactant has relatively comparable solubilization on Py and inferior solubilization on Phen compared to all other investigated solubilizing systems. It is presumably attributed to the relationships between the structure of surfactants and the chemical nature of both solutes and surfactants. The analysis studied herein has provided valuable information for the selection of mixed Gemini surfactants for solubilizing water-insoluble compounds.

Solubility Enhancement of Polycyclic Aromatic Hydrocarbons (PAHs) Using Synergistically Interacting Gemini-Conventional Surfactant Systems

The aqueous solubility of otherwise slightly soluble organic substances can be enhanced by the incorporation of surfactant micelles. In this research, the water solubility enhancements of polycyclic aromatic hydrocarbons (PAHs) viz. naphthalene, anthracene and pyrene, by micellar solutions at 30 ºC using gemini-conventional (ionic and nonionic) surfactants in their single and binary systems have been measured and compared. The solubilization capabilities of gemini surfactant butanediyl-1,4-bis(dimethylcetylammonium bromide) (G4) with cationic cetyltrimethylammonium bromide (CTAB), anionic sodium bis(2-ethylhexyl)sulfosuccinate (AOT) and nonioinic polyoxyethylene (20) cetyl ether (Brij 58) have been quantified in terms of molar solubilization ratio (MSR), partition coefficient (K m) and free energy of solubilization (ΔG s 0) of the PAHs. The order of solubilizing power of pure surfactants is Brij 58 > G4 > CTAB > AOT and in binary systems G4-Brij 58 > G4-CTAB > G4-AOT.