Structure, Dimensions, and Entanglement Statistics of Long Linear Polyethylene Chains

Entanglement Kinetics in Polymer Melts Are Chemically Specific

We investigate the universality of entanglement kinetics in polymer melts. We compare predictions of a recently developed constitutive equation for disentanglement to molecular dynamics simulations of both united-atom polyethylene and Kremer-Grest models for polymers in shear and extensional flow. We confirm that entanglements recover on the retraction time scale, rather than the reptation time scale. We find that the convective constraint release parameter β is independent of molecular weight, but that it increases with the ratio of Kuhn length bK to packing length p as β ∼ (bK/p)α, with an exponent α = 1.9, which may suggest that disentanglement rate correlates with an increase in the tube diameter. These results may help shed light on which polymers are more likely to undergo shear banding.

Macroscopic analogue to entangled polymers

The entangled structure of polymeric materials is often described as resembling a bowl of spaghetti, swarms of earthworms, or snakes. These analogies not only illustrate the concept, but form the foundation of polymer physics. However, the similarity between these macroscopic, athermal systems and polymers in terms of topology remains uncertain. To better understand this relationship, we conducted an experiment using X-ray tomography to study the structure of arrays of linear rubber bands. We found that, similar to linear polymers, the average number of entanglements increases linearly with the length of the ribbons. Additionally, we observed that entanglements are less frequent near the surface of the container, where there are also more ends, similar to what has been seen in trapped polymers. These findings provide the first experimental evidence supporting the visualization of polymer structures using macroscopic, athermal analogues, confirming the initial intuitive insights of the pioneers of polymer physics.

Water Dissolved in a Variety of Polymers Studied by Molecular Dynamics Simulation and a Theory of Solutions

The performance of a polymer medium as a separation membrane is determined by the dissolution free energy ΔG and diffusion coefficient D of the permeant. In this work, ΔG and D of water are investigated with all-atom molecular dynamics simulation in a wide variety of polymer species in the amorphous state. The computed ΔG is shown to agree well with the experimental value for linear homopolymers, and the degrees of polymerization of the homopolymers do not affect ΔG when they are beyond ∼10. The copolymers of ethylene-vinylidene difluoride, ethylene-vinyl acetate, and ethylene-acrylamide are then examined by changing the repeating patterns of the constituent monomers in both the periodic and graft forms. It is found that ΔG is determined primarily by the overall compositions of the monomers and is not affected by the copolymerization topology (periodic or graft). The hydrophobicity of the copolymer is enhanced, furthermore, when the hydrophobicity and hydrophilicity of the ethylene and non-ethylene parts are well contrasted and those parts are fragmented along the polymer chain. According to the computed D, the diffusivity of water tends to be larger when the (co)polymer is more hydrophobic and ΔG is more positive. D is actually seen to vary by orders of magnitude with the polymer structures, while the effect of the polymer species on the water permeation is stronger for ΔG than for D.

Molecular Dynamics Simulations of Crystal Nucleation near Interfaces in Incompatible Polymer Blends

We apply molecular dynamics (MD) simulations to investigate crystal nucleation in incompatible polymer blends under deep supercooling conditions. Simulations of isothermal nucleation are performed for phase-separated blends with different degrees of incompatibility. In weakly segregated blends, slow and incompatible chains in crystallizable polymer domains can significantly hinder the crystal nucleation and growth. When a crystallizable polymer is blended with a more mobile species in interfacial regions, enhanced molecular mobility leads to the fast growth of crystalline order. However, the incubation time remains the same as that in pure samples. By inducing anisotropic alignment near the interfaces of strongly segregated blends, phase separation also promotes crystalline order to grow near interfaces between different polymer domains.

Self-Avoiding Random Walks as a Model to Study Athermal Linear Polymers under Extreme Plate Confinement

Monte Carlo (MC) simulations, built around chain-connectivity-altering moves and a wall-displacement algorithm, allow us to simulate freely-jointed chains of tangent hard spheres of uniform size under extreme confinement. The latter is realized through the presence of two impenetrable, flat, and parallel plates. Extreme conditions correspond to the case where the distance between the plates approaches the monomer size. An analysis of the local structure, based on the characteristic crystallographic element (CCE) norm, detects crystal nucleation and growth at packing densities well below the ones observed in bulk analogs. In a second step, we map the confined polymer chains into self-avoiding random walks (SAWs) on restricted lattices. We study all realizations of the cubic crystal system: simple, body centered, and face centered cubic crystals. For a given chain size (SAW length), lattice type, origin of SAW, and level of confinement, we enumerate all possible SAWs (equivalently all chain conformations) and calculate the size distribution. Results for intermediate SAW lengths are used to predict the behavior of long, fully entangled chains through growth formulas. The SAW analysis will allow us to determine the corresponding configurational entropy, as it is the driving force for the observed phase transition and the determining factor for the thermodynamic stability of the corresponding crystal morphologies.

A free volume theory on the chain length dependence of the diffusivity of linear polymers

A free volume theory was developed to account for the crossover of the chain length dependence of the center-of-mass self-diffusion coefficient of linear polymers from unentangled to entangled regimes. Similar to the original free volume theory of Cohen and Turnbull, this theory requires information about the free volume overlapping factor (α), critical free volume per bead (v), and mean free volume per bead (〈v_f,i〉). However, one additional parameter is needed and it is the critical fraction of beads having free volume greater than or equal to αv termed as φ⁺. Here, α and v can be readily determined from the intermolecular and intramolecular radial distribution functions (i.e., g(r) and g^intra(r)) obtained from molecular dynamics (MD) simulation and they were found to be 0.5 and 0.0257 nm³, respectively, for polyethylene melts and it is not dependent on N. 〈v_f,i〉 was determined using the generic van der Waals (GvdW) equation of state and it had a value of 0.01 nm³ and the volume available to each bead can also be determined by Voronoi tessellation (VT) on the corresponding MD simulation trajectories. VT yielded exact probability of finding a certain amount of free volume and the free volume distribution was found in the form of the gamma distribution that is consistent with the positron annihilation lifetime spectroscopy observation. Finally, φ⁺ was calculated using the experimentally measured activation energies for diffusion per polyethylene molecule with different chain lengths and was found to be approximately 0.22 that was in line with what was found from MD simulations.

A coarse-grain model for entangled polyethylene melts and polyethylene crystallization

The Shinoda-DeVane-Klein (SDK) model is herein demonstrated to be a viable coarse-grain model for performing molecular simulations of polyethylene (PE), affording new opportunities to advance molecular-level, scientific understanding of PE materials and processes. Both structural and dynamical properties of entangled PE melts are captured by the SDK model, which also recovers important aspects of PE crystallization phenomenology. Importantly, the SDK model can be used to represent a variety of materials beyond PE and has a simple functional form, making it unique among coarse-grain PE models. This study expands the suite of tools for studying PE in silico and paves the way for future work probing PE and PE-based composites at the molecular level.

A new insight into the conformation and melt dynamics of hydrogenated polybutadiene as revealed by computer simulations

Extensive molecular dynamics simulations of the macromolecular conformation and the melt dynamics for model polymers of different molecular weights have been carried out. The selected models are hydrogenated polybutadienes with a 2% content of ethyl branches and linear polyethylene. It will be shown that the density and chain stiffness are clearly affected by both the molecular weight and the presence of ethyl branches. Furthermore, the results obtained from the simulations on the molecular size and, more remarkably, chain dynamics, perfectly match the neutron scattering experiments performed by Zamponi et al. in hydrogenated polybutadienes. We observe a clear chain contraction and a slow dynamics for the hydrogenated polybutadiene with respect to the linear chain of the same molecular length. Using the Likhtman-McLeish definitions, the obtained values of the entanglement relaxation time (τe) and the tube diameter (a) are found to be in agreement with the available experimental data (by rheology and neutron spin echo) as well as with those obtained by the simulations. Finally, a very good agreement of diffusion coefficients as a function of the molecular weight between simulations and experiments is observed. Therefore, there exists a clear difference between the results obtained for branched and linear polyethylene, accounting for a definitive effect of the short chain branching on the conformational properties and the melt dynamics of polyolefins.

Pulling-force-induced elongation and alignment effects on entanglement and knotting characteristics of linear polymers in a melt

We employ a primitive path (PP) algorithm and the Gauss linking integral to study the degree of entanglement and knotting characteristics of linear polymer model chains in a melt under the action of a constant pulling force applied to selected chain ends. Our results for the amount of entanglement, the linking number, the average crossing number, the writhe of the chains and their PPs and the writhe of the entanglement strands all suggest a different response at the length scale of entanglement strands than that of the chains themselves and of the corresponding PPs. Our findings indicate that the chains first stretch at the level of entanglement strands and next the PP (tube) gets oriented with the "flow." These two phases of the extension and alignment of the chains coincide with two phases related to the disentanglement of the chains. Soon after the onset of external force the PPs attain a more entangled conformation, and the number of nontrivially linked end-to-end closed chains increases. Next, the chains disentangle continuously to attain an almost unentangled conformation. Using the linking matrix of the chains in the melt, we furthermore show that these phases are accompanied by a different scaling of the homogeneity of the global entanglement in the system. The homogeneity of the end-to-end closed chains first increases to a maximum and then decreases slowly to a value characterizing a completely unlinked system.

Writhe and mutual entanglement combine to give the entanglement length

We propose a method to estimate N(e), the entanglement length, that incorporates both local and global topological characteristics of chains in a melt under equilibrium conditions. This estimate uses the writhe of the chains, the writhe of the primitive paths, and the number of kinks in the chains in a melt. An advantage of this method is that it works for both linear and ring chains, works under all periodic boundary conditions, does not require knowing the contour length of the primitive paths, and does not rely on a smooth set of data. We apply this method to linear finitely extendable nonlinear elastic chains and we observe that our estimates are consistent with those from other studies.

Spontaneous crystallization in athermal polymer packings

We review recent results from extensive simulations of the crystallization of athermal polymer packings. It is shown that above a certain packing density, and for sufficiently long simulations, all random assemblies of freely-jointed chains of tangent hard spheres of uniform size show a spontaneous transition into a crystalline phase. These polymer crystals adopt predominantly random hexagonal close packed morphologies. An analysis of the local environment around monomers based on the shape and size of the Voronoi polyhedra clearly shows that Voronoi cells become more spherical and more symmetric as the system transits to the ordered state. The change in the local environment leads to an increase in the monomer translational contribution to the entropy of the system, which acts as the driving force for the phase transition. A comparison of the crystallization of hard-sphere polymers and monomers highlights similarities and differences resulting from the constraints imposed by chain connectivity.

Systematic coarse-graining of the dynamics of entangled polymer melts: the road from chemistry to rheology

For optimal processing and design of entangled polymeric materials it is important to establish a rigorous link between the detailed molecular composition of the polymer and the viscoelastic properties of the macroscopic melt. We review current and past computer simulation techniques and critically assess their ability to provide such a link between chemistry and rheology. We distinguish between two classes of coarse-graining levels, which we term coarse-grained molecular dynamics (CGMD) and coarse-grained stochastic dynamics (CGSD). In CGMD the coarse-grained beads are still relatively hard, thus automatically preventing bond crossing. This also implies an upper limit on the number of atoms that can be lumped together (up to five backbone carbon atoms) and therefore on the longest chain lengths that can be studied. To reach a higher degree of coarse-graining, in CGSD many more atoms are lumped together (more than ten backbone carbon atoms), leading to relatively soft beads. In that case friction and stochastic forces dominate the interactions, and action must be undertaken to prevent bond crossing. We also review alternative methods that make use of the tube model of polymer dynamics, by obtaining the entanglement characteristics through a primitive path analysis and by simulation of a primitive chain network. We finally review super-coarse-grained methods in which an entire polymer is represented by a single particle, and comment on ways to include memory effects and transient forces.

Combined molecular algorithms for the generation, equilibration and topological analysis of entangled polymers: methodology and performance

We review the methodology, algorithmic implementation and performance characteristics of a hierarchical modeling scheme for the generation, equilibration and topological analysis of polymer systems at various levels of molecular description: from atomistic polyethylene samples to random packings of freely-jointed chains of tangent hard spheres of uniform size. Our analysis focuses on hitherto less discussed algorithmic details of the implementation of both, the Monte Carlo (MC) procedure for the system generation and equilibration, and a postprocessing step, where we identify the underlying topological structure of the simulated systems in the form of primitive paths. In order to demonstrate our arguments, we study how molecular length and packing density (volume fraction) affect the performance of the MC scheme built around chain-connectivity altering moves. In parallel, we quantify the effect of finite system size, of polydispersity, and of the definition of the number of entanglements (and related entanglement molecular weight) on the results about the primitive path network. Along these lines we approve main concepts which had been previously proposed in the literature.

Topological analysis of polymeric melts: chain-length effects and fast-converging estimators for entanglement length

Primitive path analyses of entanglements are performed over a wide range of chain lengths for both bead spring and atomistic polyethylene polymer melts. Estimators for the entanglement length N_{e} which operate on results for a single chain length N are shown to produce systematic O(1/N) errors. The mathematical roots of these errors are identified as (a) treating chain ends as entanglements and (b) neglecting non-Gaussian corrections to chain and primitive path dimensions. The prefactors for the O(1/N) errors may be large; in general their magnitude depends both on the polymer model and the method used to obtain primitive paths. We propose, derive, and test new estimators which eliminate these systematic errors using information obtainable from the variation in entanglement characteristics with chain length. The new estimators produce accurate results for N_{e} from marginally entangled systems. Formulas based on direct enumeration of entanglements appear to converge faster and are simpler to apply.

Contact network in nearly jammed disordered packings of hard-sphere chains

We present salient results of the analysis of the geometrical structure of a large fully equilibrated ensemble of nearly jammed packings of linear freely jointed chains of tangent hard spheres generated via extensive Monte Carlo simulations. In spite the expected differences due to chain connectivity, both the pair-correlation function and the contact network for chain packings are found to strongly resemble those in packings of monomeric hard spheres at the maximally random jammed (MRJ) state. A remarkable finding of the present work is the tendency of chains to form closed loops at the MRJ state as a consequence of chain collapse. Our simulations on disordered nearly jammed chain packings yield an average coordination number of 6, which fulfills the isostaticity condition and is in excellent agreement with the corresponding simulation [A. Donev, S. Torquato, and F. H. Stillinger, Phys. Rev. E 71, 011105 (2005)] and experimental [T. Aste, M. Saadatfar, and T. J. Senden, Phys. Rev. E 71, 061302 (2005)] findings for jammed packings of monatomic hard spheres. An exact correspondence between the statistical-mechanical ensembles of monomeric spheres and of hard-sphere chains offers insights regarding the structure and topology of the contact network of hard-sphere systems at the MRJ state.