Molecular Dynamics Simulations of Hen Egg White Lysozyme Adsorption at a Charged Solid Surface

Tuning Electrostatic Interactions To Control Orientation of GFP Protein Adsorption on Silica Surface

The adsorption of green fluorescent protein (GFP) on silica surfaces has been the subject of growing interest due to its potential applications in various fields, including biotechnology and biomedicine. In this study, we used all-atom molecular dynamics simulations to investigate the charge-driven adsorption of wild type GFP and its supercharged variants on silica surfaces. The results showed that the positively charged variant of GFP adsorbed on the negatively charged silica surface with minimal loss in its secondary structure. Further studies were conducted to understand the role of surface charge distribution on two other positively charged variants of GFP, and the results showed that the orientation of GFP on silica can be easily tuned by careful mutations of the charged amino acid residues on the GFP. This study provides valuable molecular insights into the role of electrostatic-driven adsorption of GFP and highlights the importance of charge interactions in the adsorption process.

Structural and Dynamic Insights into SARS-CoV-2 Spike-Protein-Montmorillonite Interactions

The spike (S) protein of SARS-CoV-2 has been found to play a decisive role in the cell entry mechanism of the virus and has been the prime target of most vaccine development efforts. Although numerous vaccines are already in use and more than half of the world population has been fully vaccinated, the emergence of new variants of the virus poses a challenge to the existing vaccines. Hence, developing an effective drug therapy is a crucial step in ending the pandemic. Nanoparticles can play a crucial role as a drug or a drug carrier and help tackle the pandemic effectively. Here, we performed explicit all-atom molecular dynamics simulations to probe interactions between S protein and Montmorillonite (MMT) nano clay surface. We built two systems with different counterions (Na+ and Ca2+), namely Na-MMT and Ca-MMT, to investigate the effect of different ions on S protein-MMT interaction. Structural modification of S protein was observed in the presence of MMT surface, particularly the loss of helical content of S protein. We revealed that electrostatic and hydrophobic interactions synergistically govern the S protein-MMT interactions. However, hydrophobic interactions were more pronounced in the Na-MMT system than in Ca-MMT. We also revealed residues and glycans of S protein closely interacting with the MMT surface. Interestingly, N165 and N343, which we found to be closely interacting with MMT in our simulations, also have a critical role in cell entry and in thwarting the cell's immune response in recent studies. Overall, our work provides atomistic insights into S protein-MMT interaction and enriches our understanding of the nanoparticle-S protein interaction mechanism, which will help develop advanced therapeutic techniques in the future.

Functionalisation of Inorganic Material Surfaces with Staphylococcus Protein A: A Molecular Dynamics Study

Staphylococcus protein A (SpA) is found in the cell wall of Staphylococcus aureus bacteria. Its ability to bind to the constant Fc regions of antibodies means it is useful for antibody extraction, and further integration with inorganic materials can lead to the development of diagnostics and therapeutics. We have investigated the adsorption of SpA on inorganic surface models such as experimentally relevant negatively charged silica, as well as positively charged and neutral surfaces, by use of fully atomistic molecular dynamics simulations. We have found that SpA, which is itself negatively charged at pH7, is able to adsorb on all our surface models. However, adsorption on charged surfaces is more specific in terms of protein orientation compared to a neutral Au (111) surface, while the protein structure is generally well maintained in all cases. The results indicate that SpA adsorption is optimal on the siloxide-rich silica surface, which is negative at pH7 since this keeps the Fc binding regions free to interact with other species in solution. Due to the dominant role of electrostatics, the results are transferable to other inorganic materials and pave the way for new diagnostic and therapeutic designs where SpA might be used to conjugate antibodies to nanoparticles.

Adsorption of lysozyme into a charged confining pore

Several applications arise from the confinement of proteins on surfaces because their stability and biological activity are enhanced. It is also known that the way in which a protein adsorbs on the surface is important for its biological function since its active sites should not be obstructed. In this study, the adsorption properties of hen egg-white lysozyme, HEWL, into a negatively charged silica pore is examined by employing a coarse-grained model and constant-pH Monte Carlo simulations. The role of electrostatic interactions is taken into account via including the Debye-Hückel potentials into the Cα structure-based model. We evaluate the effects of pH, salt concentration, and pore radius on the protein preferential orientation and spatial distribution of its residues regarding the pore surface. By mapping the residues that stay closer to the pore surface, we find that the increase of pH leads to orientational changes of the adsorbed protein when the solution pH gets closer to the HEWL isoelectric point. Under these conditions, the pK_a shift of these important residues caused by the adsorption into the charged confining surface results in a HEWL charge distribution that stabilizes the adsorption in the observed protein orientation. We compare our observations to the results of the pK_a shift for HEWL available in the literature and to some experimental data.

Aggregation of Lysozyme in the Presence of a Mixed Bilayer of POPC and POPG

Understanding the molecular mechanisms by which amyloidogenic proteins interact with membranes is a challenging task. Amyloid accumulates from many human diseases have been observed to contain membrane lipids. In this work, coarse-grained molecular dynamics simulations have been used to inspect hen egg white lysozyme (HEWL) aggregation and membrane association in the presence of a pure POPC (1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine) bilayer and a POPC and POPG (1-palmitoyl-2-oleoyl-sn-glycero-3-phosphatidylglycerol) mixed bilayer. It was observed that, in both cases, two HEWLs formed aggregates. In the presence of a mixed bilayer, after aggregation, the aggregated system started to interact with the membrane. It has been found that one of the lysozymes which came closer to the mixed bilayer unfolded more. The process of the initial insertion of an aggregated system in the mixed bilayer has been analyzed. The structural rearrangements of the protein and lipids were analyzed as well along the course of the simulation. Although with a pure POPC bilayer, aggregation was observed, the aggregated system moved away from the membrane. We believe that our study will provide considerable insights into lysozyme aggregation in the presence of a membrane environment.

Brownian Dynamics Simulations of Proteins in the Presence of Surfaces: Long-Range Electrostatics and Mean-Field Hydrodynamics

Simulations of macromolecular diffusion and adsorption in confined environments can offer valuable mechanistic insights into numerous biophysical processes. In order to model solutes at atomic detail on relevant time scales, Brownian dynamics simulations can be carried out with the approximation of rigid body solutes moving through a continuum solvent. This allows the precomputation of interaction potential grids for the solutes, thereby allowing the computationally efficient calculation of forces. However, hydrodynamic and long-range electrostatic interactions cannot be fully treated with grid-based approaches alone. Here, we develop a treatment of both hydrodynamic and electrostatic interactions to include the presence of surfaces by modeling grid-based and long-range interactions. We describe its application to simulate the self-association and many-molecule adsorption of the well-characterized protein hen egg-white lysozyme to mica-like and silica-like surfaces. We find that the computational model can recover a number of experimental observables of the adsorption process and provide insights into their determinants. The computational model is implemented in the Simulation of Diffusional Association (SDA) software package.

Lysozyme Adsorption on Different Functionalized MXenes: A Multiscale Simulation Study

Recently, MXenes, due to their abundant advantages, have been widely applied in energy storage, separation, catalysis, biosensing, et al. In this study, parallel tempering Monte Carlo and molecular dynamics methods were performed to investigate lysozyme adsorption on different functionalized Ti₃C₂T_x (-O, -OH, and -F). The simulation results show that lysozyme can adsorb effectively on Ti₃C₂T_x surfaces, and the order of interaction strength is Ti₃C₂O₂ > Ti₃C₂F₂ > Ti₃C₂(OH)₂. Electrostatics together with van der Waals interactions control protein adsorption. The orientation distributions of lysozyme adsorbed on the Ti₃C₂O₂ and Ti₃C₂F₂ surfaces are more concentrated than that on the Ti₃C₂(OH)₂ surface. During adsorption, the conformation of lysozyme remains stable, suggesting the good biocompatibility of Ti₃C₂T_x. Besides, the distribution of the interfacial water layer on the Ti₃C₂T_x surface has a certain impact on protein adsorption. This study provides theoretical insights for understanding the biocompatibility of 2D Ti₃C₂T_x materials and may help us evaluate the engineering of their surfaces for future biorelated applications.

Research progress and application opportunities of nanoparticle-protein corona complexes

Nanoparticles (NPs) can be used to design for nanomedicines with different chemical surface properties owing to their size advantages and the capacity of specific delivery to targeted sites in organisms. The discovery of the presence of protein corona (PC) has changed our classical view of NPs, stimulating researchers to investigate the in vivo fate of NPs as they enter biological systems. Both NPs and PC have their specificity but complement each other, so they should be considered as a whole. The formation and characterization of NP-PC complexes provide new insights into the design, functionalization, and application of nanocarriers. Based on progress of recent researches, we reviewed the formation, characterization, and composition of the PC, and introduced those critical factors influencing PC, simultaneously expound the effect of PC on the biological function of NPs. Especially we put forward the opportunities and challenges when NP-PC as a novel nano-drug carrier for targeted applications. Furthermore, we discussed the pros versus cons of the PC, as well as how to make better PC in the future application of NPs.

Constant-pH Brownian Dynamics Simulations of a Protein near a Charged Surface

We have developed a rigid-body Brownian dynamics algorithm that allows for simulations of a globular protein suspended in an ionic solution confined by a charged planar boundary, with an explicit treatment of pH-dependent protein protonation equilibria and their couplings to the electrostatic potential of the plane. Electrostatic interactions are described within a framework of the continuum Poisson-Boltzmann model, whereas protein-plane hydrodynamic interactions are evaluated based on analytical expressions for the position- and orientation-dependent near-wall friction tensor of a spheroid. The algorithm was applied to simulate near-surface diffusion of lysozyme in solutions having pH in the range 4-10 and ionic strengths of 10 and 150 mM. As a reference, we performed Brownian dynamics simulations in which the protein is assigned a fixed, most probable protonation state, appropriate for given solution conditions and unaffected by the presence of the charged plane, and Brownian dynamics simulations in which the protein probes possible protonation states with the pH-dependent probability, but these variations are not coupled to the electric field generated by the boundary. We show that electrostatic interactions with the negatively charged plane substantially modify probabilities of different protonation states of lysozyme and shift protonation equilibria of both acidic and basic amino acid side chains toward higher pH values. Consequently, equilibrium energy distributions, equilibrium position-orientation distributions, and functions that characterize rotational dynamics, which for a protein with multiple ionization sites, such as lysozyme, in the presence of a charged obstacle are pH-dependent, are significantly affected by the approach taken to incorporate the solution pH into simulations.

Lysozyme Adsorption on Porous Organic Cages: A Molecular Simulation Study

Recently, porous organic cages (POCs) have emerged as a novel porous material with many merits and are widely utilized in many application fields. In this work, for the first time, molecular dynamics simulations were performed to investigate the mechanism of lysozyme adsorption onto the CC3 crystal, a kind of widely studied POC material. The simulation results show that lysozyme adsorbs onto the surface of CC3 with "top end-on," "back-on," or "side-on" orientations. It is found that the van der Waals interaction is the primary contribution to the binding; the conformation of the lysozyme is well preserved during the adsorption process. This provides some evidence for its biocompatibility and feasibility in biorelated applications. Arginine plays an important role in mediating the adsorption through nonpolar aliphatic chains. More importantly, the distribution and structure of the water layer on the POC surface has a significant impact on adsorption. This study provides insights into the development of POC materials with defined morphologies for the adsorption of biomolecules and may help the rational design of biorelated systems.

Orientation and Conformation of Proteins at the Air-Water Interface Determined from Integrative Molecular Dynamics Simulations and Sum Frequency Generation Spectroscopy

Understanding the assembly of proteins at the air-water interface (AWI) informs the formation of protein films, emulsion properties, and protein aggregation. Determination of protein conformation and orientation at an interface is difficult to resolve with a single experimental or simulation technique alone. To date, the interfacial structure of even one of the most widely studied proteins, lysozyme, at the AWI remains unresolved. In this study, molecular dynamics (MD) simulations are used to determine if the protein adopts a side-on, head-on, or axial orientation at the AWI with two different forcefields, GROMOS-53a6 + SPC/E and a99SB-disp + TIP4P-D. Vibrational sum frequency generation (SFG) spectroscopy experiments and spectral SFG calculations validate consistency between the structure determined from MD and experiments. Overall, we show with strong agreement that lysozyme adopts an axial conformation at pH 7. Further, we provide molecular-level insight as to how pH influences the binding domains of lysozyme resulting in side-on adsorption near the isoelectric point of the lysozyme.

Confining a Protein-Containing Water Nanodroplet inside Silica Nanochannels

Incorporation of biological systems in water nanodroplets has recently emerged as a new frontier to investigate structural changes of biomolecules, with perspective applications in ultra-fast drug delivery. We report on the molecular dynamics of the digestive protein Pepsin subjected to a double confinement. The double confinement stemmed from embedding the protein inside a water nanodroplet, which in turn was caged in a nanochannel mimicking the mesoporous silica SBA-15. The nano-bio-droplet, whose size fits with the pore diameter, behaved differently depending on the protonation state of the pore surface silanols. Neutral channel sections allowed for the droplet to flow, while deprotonated sections acted as anchoring piers for the droplet. Inside the droplet, the protein, not directly bonded to the surface, showed a behavior similar to that reported for bulk water solutions, indicating that double confinement should not alter its catalytic activity. Our results suggest that nanobiodroplets, recently fabricated in volatile environments, can be encapsulated and stored in mesoporous silicas.

Orientation effects on the nanoscale adsorption behavior of bone morphogenetic protein-2 on hydrophilic silicon dioxide

Bone Morphogenetic Protein-2 (BMP-2) is a growth factor associated with different developmental functions in regenerative medicine and tissue engineering. Because of its favorable properties for the development of bone and cartilage tissue, BMP-2 promotes the biocompatibility of medical implants. In this research, molecular dynamics simulations were implemented to simulate the interaction of BMP-2 with a flat hydrophilic silicon dioxide substrate, an important biomaterial for medical applications. We considered the influence of four orthogonal protein orientations on the adsorption behavior. Results showed that arginine and lysine were the main residues to interact with the silicon dioxide substrate, directly adsorbing onto the surface and overcoming water layers. However, between these charged residues, we observed a preference for arginine to adsorb. Orientations with the α-helix loop closer to the surface at the beginning of the simulations had greater loss of secondary structure as compared to the other configurations. Among all the orientations, the end-on B configuration had favorable adsorption characteristics with a binding energy of 14 000 kJ mol-1 and retention of 21.7% β-sheets as confirmed by the Ramachandran plots. This research provides new insights into the nanoscale interaction of BMP-2 and silicon dioxide substrate with applications in orthopedic implants and regenerative medicine.

Rationalising drug delivery using nanoparticles: a combined simulation and immunology study of GnRH adsorbed to silica nanoparticles

Silica nanoparticles (SiNPs) have been shown to have significant potential for drug delivery and as adjuvants for vaccines. We have simulated the adsorption of GnRH-I (gonadotrophin releasing hormone I) and a cysteine-tagged modification (cys-GnRH-I) to model silica surfaces, as well as its conjugation to the widely-used carrier protein bovine serum albumin (BSA). Our subsequent immunological studies revealed no significant antibody production was caused by the peptide-SiNP systems, indicating that the treatment was not effective. However, the testosterone response with the native peptide-SiNPs indicated a drug effect not found with cys-GnRH-I-SiNPs; this behaviour is explained by the specific orientation of the peptides at the silica surface found in the simulations. With the BSA systems, we found significant testosterone reduction, particularly for the BSA-native conjugates, and an antibody response that was notably higher with the SiNPs acting as an adjuvant; this behaviour again correlates well with the epitope presentation predicted by the simulations. The range of immunological and hormone response can therefore be interpreted and understood by the simulation results and the presentation of the peptides to solution, paving the way for the future rational design of drug delivery and vaccine systems guided by biomolecular simulation.

Molecular Dynamics Simulation of Protein Biosurfactants

Surfaces and interfaces are ubiquitous in nature and are involved in many biological processes. Due to this, natural organisms have evolved a number of methods to control interfacial and surface properties. Many of these methods involve the use of specialised protein biosurfactants, which due to the competing demands of high surface activity, biocompatibility, and low solution aggregation may take structures that differ from the traditional head–tail structure of small molecule surfactants. As well as their biological functions, these proteins have also attracted interest for industrial applications, in areas including food technology, surface modification, and drug delivery. To understand the biological functions and technological applications of protein biosurfactants, it is necessary to have a molecular level description of their behaviour, in particular at surfaces and interfaces, for which molecular simulation is well suited to investigate. In this review, we will give an overview of simulation studies of a number of examples of protein biosurfactants (hydrophobins, surfactin, and ranaspumin). We will also outline some of the key challenges and future directions for molecular simulation in the investigation of protein biosurfactants and how this can help guide future developments.

The effects of tether placement on antibody stability on surfaces

Despite their potential benefits, antibody microarrays have fallen short of performing reliably and have not found widespread use outside of the research setting. Experimental techniques have been unable to determine what is occurring on the surface of an atomic level, so molecular simulation has emerged as the primary method of investigating protein/surface interactions. Simulations of small proteins have indicated that the stability of the protein is a function of the residue on the protein where a tether is placed. The purpose of this research is to see whether these findings also apply to antibodies, with their greater size and complexity. To determine this, 24 tethering locations were selected on the antibody Protein Data Bank (PDB) ID: 1IGT. Replica exchange simulations were run on two different surfaces, one hydrophobic and one hydrophilic, to determine the degree to which these tethering sites stabilize or destabilize the antibody. Results showed that antibodies tethered to hydrophobic surfaces were in general less stable than antibodies tethered to hydrophilic surfaces. Moreover, the stability of the antibody was a function of the tether location on hydrophobic surfaces but not hydrophilic surfaces.

Understanding the curvature effect of silica nanoparticles on lysozyme adsorption orientation and conformation: a mesoscopic coarse-grained simulation study

In nanobiotechnology applications, curvature of nanoparticles has a significant effect on protein activities. In this work, lysozyme adsorption on different-sized silica nanoparticles (SNPs) was simulated at the microsecond timescale by using mesoscopic coarse-grained molecular dynamics simulations. It is found that, with the increase of nanoparticle size, which indicates a decrease of surface curvature, adsorbed lysozyme shows a narrower orientation distribution and a greater conformation change, as the electrostatic attraction dominates lysozyme adsorption, and this trend is more pronounced on larger SNPs. Interestingly, the effect induced by different SNP surface curvatures is not related to the direct contact area between lysozyme and SNPs, but to the interfacial hydration layer above the silica surface, since a smaller curvature can lead to a stronger interfacial hydration and make the distribution of interfacial water molecules more ordered. Besides, at higher ionic strength, lysozyme conformation is less affected by strongly negatively charged SNPs, especially for larger nanoparticles. This work might shed some light on how to prepare protein coronas with higher bioactivities in nanobiotechnology.

NanoEHS beyond Toxicity - Focusing on Biocorona

The first phase of environmental health and safety of nanomaterials (nanoEHS) studies has been mainly focused on evidence-based investigations that probe the impact of nanoparticles, nanomaterials and nano-enabled products on biological and ecological systems. The integration of multiple disciplines, including colloidal science, nanomaterial science, chemistry, toxicology/immunology and environmental science, is necessary to understand the implications of nanotechnology for both human health and the environment. While strides have been made in connecting the physicochemical properties of nanomaterials with their hazard potential in tiered models, fundamental understanding of nano-biomolecular interactions and their implications for nanoEHS is largely absent from the literature. Research on nano-biomolecular interactions within the context of natural systems not only provides important clues for deciphering nanotoxicity and nanoparticle-induced pathology, but also presents vast new opportunities for screening beneficial material properties and designing greener products from bottom up. This review highlights new opportunities concerning nano-biomolecular interactions beyond the scope of toxicity.

Bovine Serum Albumin Adsorption at a Silica Surface Explored by Simulation and Experiment

Molecular details of BSA adsorption on a silica surface are revealed by fully atomistic molecular dynamics (MD) simulations (with a 0.5 μs trajectory), supported by dynamic light scattering (DLS), zeta potential, multiparametric surface plasmon resonance (MP-SPR), and contact angle experiments. The experimental and theoretical methods complement one another and lead to a wider understanding of the mechanism of BSA adsorption across a range of pH 3-9. The MD results show how the negatively charged BSA at pH7 adsorbs to the negatively charged silica surface, and reveal a unique orientation with preserved secondary and tertiary structure. The experiments then show that the protein forms complete monolayers at ∼ pH6, just above the protein's isoelectric point (pH5.1). The surface contact angle is maximum when it is completely coated with protein, and the hydrophobicity of the surface is understood in terms of the simulated protein conformation. The adsorption behavior at higher pH > 6 is also consistently interpreted using the MD picture; both the contact angle and the adsorbed protein mass density decrease with increasing pH, in line with the increasing magnitude of negative charge on both the protein and the surface. At lower pH < 5 the protein starts to unfold, and the adsorbed mass dramatically decreases. The comprehensive picture that emerges for the formation of oriented protein films with preserved native conformation will help guide efforts to create functional films for new technologies.

How Negatively Charged Proteins Adsorb to Negatively Charged Surfaces: A Molecular Dynamics Study of BSA Adsorption on Silica

How proteins adsorb to inorganic material surfaces is critically important for the development of new biotechnologies, since the orientation and structure of the adsorbed proteins impacts their functionality. While it is known that many negatively charged proteins readily adsorb to negatively charged oxide surfaces, a detailed understanding of how this process occurs is lacking. In this work we study the adsorption of BSA, an important transport protein that is negatively charged at physiological conditions, to a model silica surface that is also negatively charged. We use fully atomistic molecular dynamics to provide detailed understanding of the noncovalent interactions that bind the BSA to the silica surface. Our results provide new insight into the competing roles of long-range electrostatics and short-range forces, and the consequences this has for the orientation and structure of the adsorbed proteins.

Peptides@mica: from affinity to adhesion mechanism

Investigating the adsorption of peptides on inorganic surfaces, on the molecular level, is fundamental for medicinal and analytical applications. Peptides can be potent as linkers between surfaces and living cells in biochips or in implantation medicine. Here, we studied the adsorption process of the positively charged pentapeptide RTHRK, a recently identified binding sequence for surface oxidized silicon, and novel analogues thereof to negatively charged mica surfaces. Homogeneous formation of monolayers in the nano- and low micromolar peptide concentration range was observed. We propose an alternative and efficient method to both quantify binding affinity and follow adhesion behavior. This method makes use of the thermodynamic relationship between surface coverage, measured by atomic force microscopy (AFM), and the concomitant free energy of adhesion. A knowledge-based fit to the autocorrelation of the AFM images was used to correct for a biased surface coverage introduced by the finite lateral resolution of the AFM. Binding affinities and mechanisms were further explored by large scale molecular dynamics (MD) simulations. The combination of well validated MD simulations with topological data from AFM revealed a better understanding of peptide adsorption processes on the atomistic scale. We demonstrate that binding affinity is strongly determined by a peptide's ability to form salt bridges and hydrogen bonds with the surface lattice. Consequently, differences in hydrogen bond formation lead to substantial differences in binding affinity despite conservation of the peptide's overall charge. Further, MD simulations give access to relative changes in binding energy of peptide variations in comparison to a lead compound.

Steering protein adsorption at charged surfaces: electric fields and ionic screening

Protein adsorption at charged surfaces is a common process in the development of functional technological devices.

When the Label Matters: Adsorption of Labeled and Unlabeled Proteins on Charged Surfaces

Fluorescent labels are often attached to proteins to monitor binding and adsorption processes. Docking simulations for native hen egg white lysozyme (HEWL) and HEWL labeled with fluorescein isothiocyanate show that these adsorb differently on charged surfaces. Attachment of even a small label can significantly change the interaction properties of a protein. Thus, the results of experiments with fluorescently labeled proteins should be interpreted by modeling the structures and computing the interaction properties of both labeled and unlabeled species.

Effects of polymer graft properties on protein adsorption and transport in ion exchange chromatography: a multiscale modeling study

Multiscale simulation is used to study the adsorption of lysozyme onto ion exchangers obtained by grafting charged polymers into a porous matrix, in systems with various polymer properties and strengths of electrostatic interaction. Molecular dynamics simulations show that protein partitioning into the polymer-filled pore space increases with the overall charge content of the polymers, while the diffusivity in the pore space decreases. However, the combination of greatly increased partitioning and modestly decreased diffusion results in macroscopic transport rates that increase as a function of charge content, as the large concentration driving force due to enhanced pore space partitioning outweighs the reduction in the pore space diffusivity. Matrices having greater charge associated with the grafted polymers also exhibit more diffuse intraparticle concentration profiles during transient adsorption. In systems with a high charge content per polymer and a low protein loading, the polymers preferentially partition toward the surface due to favorable interactions with the surface-bound protein. These results demonstrate the potential of multiscale modeling to illuminate qualitative trends between molecular properties and the adsorption equilibria and kinetic properties observable on macroscopic scales.

Thermodynamics of coupled protein adsorption and stability using hybrid Monte Carlo simulations

A better understanding of changes in protein stability upon adsorption can improve the design of protein separation processes. In this study, we examine the coupling of the folding and the adsorption of a model protein, the B1 domain of streptococcal protein G, as a function of surface attraction using a hybrid Monte Carlo (HMC) approach with temperature replica exchange and umbrella sampling. In our HMC implementation, we are able to use a molecular dynamics (MD) time step that is an order of magnitude larger than in a traditional MD simulation protocol and observe a factor of 2 enhancement in the folding and unfolding rate. To demonstrate the convergence of our systems, we measure the travel of our order parameter the fraction of native contacts between folded and unfolded states throughout the length of our simulations. Thermodynamic quantities are extracted with minimum statistical variance using multistate reweighting between simulations at different temperatures and harmonic distance restraints from the surface. The resultant free energies, enthalpies, and entropies of the coupled unfolding and absorption processes are in qualitative agreement with previous experimental and computational observations, including entropic stabilization of the adsorbed, folded state relative to the bulk on surfaces with low attraction.

Mesoscopic coarse-grained simulations of lysozyme adsorption

Coarse-grained simulations are adopted to study the adsorption behavior of lysozyme on different (hydrophobic, neutral hydrophilic, zwitterionic, negatively charged, and positively charged) surfaces at the mesoscopic microsecond time scale (1.2 μs). Simulation results indicate the following: (i) the conformation change of lysozyme on the hydrophobic surface is bigger than any other studied surfaces; (ii) the active sites of lysozyme are faced to the hydrophobic surface with a "top end-on" orientation, while they are exposed to the liquid phase on the hydrophilic surface with a "back-on" orientation; (iii) the neutral hydrophilic surface can induce the adsorption of lysozyme, while the nonspecific protein adsorption can be resisted by the zwitterionic surface; (iv) when the solution ionic strength is low, lysozyme can anchor on the negatively charged surface easily but cannot adsorb on the positively charged surface; (v) when the solution ionic strength is high, the positively charged lysozyme can also adsorb on the like-charged surface; (vi) the major positive potential center of lysozyme, especially the residue ARG128, plays a vital role in leading the adsorption of lysozyme on charged surfaces; (vii) when the ionic strength is high, a counterion layer is formed above the positively charged surface, which is the key factor why lysozyme can adsorb on a like-charged surface. The coarse-grained method based on the MARTINI force field for proteins and the BMW water model could provide an efficient way to understand protein interfacial adsorption behavior at a greater length scale and time scale.

Physicochemical characterization of nanoparticles and their behavior in the biological environment

Whilst the physical and chemical properties of nanoparticles in the gas or idealized solvent phase can nowadays be characterized with sufficient accuracy, this is no longer the case for particles in the presence of a complex biological environment.

Structural determinants for protein adsorption/non-adsorption to silica surface

The understanding of the mechanisms involved in the interaction of proteins with inorganic surfaces is of major interest in both fundamental research and applications such as nanotechnology. However, despite intense research, the mechanisms and the structural determinants of protein/surface interactions are still unclear. We developed a strategy consisting in identifying, in a mixture of hundreds of soluble proteins, those proteins that are adsorbed on the surface and those that are not. If the two protein subsets are large enough, their statistical comparative analysis must reveal the physicochemical determinants relevant for adsorption versus non-adsorption. This methodology was tested with silica nanoparticles. We found that the adsorbed proteins contain a higher number of charged amino acids, particularly arginine, which is consistent with involvement of this basic amino acid in electrostatic interactions with silica. The analysis also identified a marked bias toward low aromatic amino acid content (phenylalanine, tryptophan, tyrosine and histidine) in adsorbed proteins. Structural analyses and molecular dynamics simulations of proteins from the two groups indicate that non-adsorbed proteins have twice as many π-π interactions and higher structural rigidity. The data are consistent with the notion that adsorption is correlated with the flexibility of the protein and with its ability to spread on the surface. Our findings led us to propose a refined model of protein adsorption.

Spontaneous membrane-translocating peptide adsorption at silica surfaces: a molecular dynamics study

Spontaneous membrane-translocating peptides (SMTPs) have recently been shown to directly penetrate cell membranes. Adsorption of a SMTP, and some engineered extensions, at model silica surfaces is studied herein using fully atomistic molecular dynamics simulations in order to assess their potential to construct novel drug delivery systems. The simulations are designed to reproduce the electric fields above single, siloxide-rich charged surfaces, and the trajectories indicate that the main driving force for adsorption is electrostatic. An increase in the salt concentration slows down but does not prevent adsorption of the SMTP to the surface; it also does not result in peptide desorption, suggesting additional binding via hydrophobic forces. The results are used to design extensions to the peptide sequence which we find enhance adsorption but do not affect the adsorbed conformation. We also investigate the effect of surface hydroxylation on the peptide adsorption. In all cases, the final adsorbed conformations are with the peptide flattened to the surface with arginine residues, which are key to the peptide’s function, anchoring it to the surface so that they are not exposed to solution. This conformation could impact their role in membrane translocation and thus has important implications for the design of future drug delivery vehicles.

Direct observation of a single nanoparticle-ubiquitin corona formation

The advancement of nanomedicine and the increasing applications of nanoparticles in consumer products have led to administered biological exposure and unintentional environmental accumulation of nanoparticles, causing concerns over the biocompatibility and sustainability of nanotechnology. Upon entering physiological environments, nanoparticles readily assume the form of a nanoparticle-protein corona that dictates their biological identity. Consequently, understanding the structure and dynamics of a nanoparticle-protein corona is essential for predicting the fate, transport, and toxicity of nanomaterials in living systems and for enabling the vast applications of nanomedicine. Here we combined multiscale molecular dynamics simulations and complementary experiments to characterize the silver nanoparticle-ubiquitin corona formation. Notably, ubiquitins competed with citrates for the nanoparticle surface, governed by specific electrostatic interactions. Under a high protein/nanoparticle stoichiometry, ubiquitins formed a multi-layer corona on the particle surface. The binding exhibited an unusual stretched-exponential behavior, suggesting a rich binding kinetics. Furthermore, the binding destabilized the α-helices while increasing the β-sheet content of the proteins. This study revealed the atomic and molecular details of the structural and dynamic characteristics of nanoparticle-protein corona formation.

Interaction of firefly luciferase and silver nanoparticles and its impact on enzyme activity

We report on the dose-dependent inhibition of firefly luciferase activity induced by exposure of the enzyme to 20 nm citrate-coated silver nanoparticles (AgNPs). The inhibition mechanism was examined by characterizing the physicochemical properties and biophysical interactions of the enzyme and the AgNPs. Consistently, binding of the enzyme induced an increase in zeta potential from -22 to 6 mV for the AgNPs, triggered a red-shift of 44 nm in the absorbance peak of the AgNPs, and rendered a 'protein corona' of 20 nm in thickness on the nanoparticle surfaces. However, the secondary structures of the enzyme were only marginally affected upon formation of the protein corona, as verified by circular dichroism spectroscopy measurement and multiscale discrete molecular dynamics simulations. Rather, inductively coupled plasma mass spectrometry measurement revealed a significant ion release from the AgNPs. The released silver ions could readily react with the cysteine residues and N-groups of the enzyme to alter the physicochemical environment of their neighboring catalytic site and subsequently impair the enzymatic activity.

Surface topography effects in protein adsorption on nanostructured carbon allotropes

We report a molecular dynamics (MD) simulation study of protein adsorption on the surface of nanosized carbon allotropes, namely single-walled carbon nanotubes (SWNT) considering both the convex outer surface and the concave inner surface, together with a graphene sheet for comparison. These systems are chosen to investigate the effect of the surface curvature on protein adsorption at the same surface chemistry, given by sp(2) carbon atoms in all cases. The simulations show that proteins do favorably interact with these hydrophobic surfaces, as previously found on graphite which has the same chemical nature. However, the main finding of the present study is that the adsorption strength does depend on the surface topography: in particular, it is slightly weaker on the outer convex surfaces of SWNT and is conversely enhanced on the inner concave SWNT surface, being therefore intermediate for flat graphene. We additionally find that oligopeptides may enter the cavity of common SWNT, provided their size is small enough and the tube diameter is large enough for both entropic and energetic reasons. Therefore, we suggest that proteins can effectively be used to solubilize in water single-walled (and by analogy also multiwalled) carbon nanotubes through adsorption on the outer surface, as indeed experimentally found, and to functionalize them after insertion of oligopeptides within the cavity of nanotubes of appropriate size.

Label-free biosensing with single-molecule force spectroscopy

We demonstrate here a novel single-molecule, label-free bioanalytical system capable of sensing the presence of specific ssDNA oligomer sequences and proteins with high selectivity and sensitivity. An ssDNA concentration of 1 nM and a Lyz concentration of 0.65 nM could be detected.

Kinetics of protein unfolding at interfaces

The conformation of protein molecules is determined by a balance of various forces, including van der Waals attraction, electrostatic interaction, hydrogen bonding, and conformational entropy. When protein molecules encounter an interface, they are often adsorbed on the interface. The conformation of an adsorbed protein molecule strongly depends on the interaction between the protein and the interface. Recent time-resolved investigations have revealed that protein conformation changes during the adsorption process due to the protein-protein interaction increasing with increasing interface coverage. External conditions also affect the protein conformation. This review considers recent dynamic observations of protein adsorption at various interfaces and their implications for the kinetics of protein unfolding at interfaces.

Lysozyme as a pH-responsive valve for the controlled release of guest molecules from mesoporous silica

Mesoporous silica nanoparticles show promise as a drug-carrier vehicle for biomedical applications, but the development of simple, biocompatible capping systems has remained a challenge. We have found that lysozyme molecules can act as a pH-responsive nanovalve to block and unlock the pore entrances of MCM-41 nanoparticles for guest molecules. Our experiments indicate that pore blocking is due to a pH-induced conformational change by which the effective size of the protein is changed in a reversible manner. This effect may form the basis of a controlled-release system without the need to functionalize the pore mouth and caps.

Protein diffusion and long-term adsorption states at charged solid surfaces

The diffusion pathways of lysozyme adsorbed to a model charged ionic surface are studied using fully atomistic steered molecular dynamics simulation. The simulations start from existing protein adsorption trajectories, where it has been found that one particular residue, Arg128 at the N,C-terminal face, plays a crucial role in anchoring the lysozyme to the surface [Langmuir 2010 , 26 , 15954 - 15965]. We first investigate the desorption pathway for the protein by pulling the Arg128 side chain away from the surface in the normal direction, and its subsequent readsorption, before studying diffusion pathways by pulling the Arg128 side chain parallel to the surface. We find that the orientation of this side chain plays a decisive role in the diffusion process. Initially, it is oriented normal to the surface, aligning in the electrostatic field of the surface during the adsorption process, but after resorption it lies parallel to the surface, being unable to return to its original orientation due to geometric constraints arising from structured water layers at the surface. Diffusion from this alternative adsorption state has a lower energy barrier of ∼0.9 eV, associated with breaking hydrogen bonds along the pathway, in reasonable agreement with the barrier inferred from previous experimental observation of lysozyme surface clustering. These results show the importance of studying protein diffusion alongside adsorption to gain full insight into the formation of protein clusters and films, essential steps in the future development of functionalized surfaces.