Extraction and Metalation of Porphyrins in Fluorous Liquids with Carboxylic Acids and Metal Salts

Accurate LC-MS/MS Analysis of Diacylglycerols in Human Plasma with Eliminating Matrix Effect by Phospholipids Using Fluorous Biphasic Extraction

We developed an accurate method for determining diacylglycerols (DAGs) in human plasma using a fluorous biphasic liquid-liquid extraction method, followed by liquid chromatography with tandem mass spectrometry (LC-MS/MS) analysis. The lipid mixture in the plasma was first extracted with chloroform by using the Bligh-Dyer method. The resulting solution was subjected to fluorous biphasic liquid-liquid extraction to remove phospholipids, which are known to cause matrix effects during the LC-MS/MS analysis. In this method, phospholipids in a lipid mixture solution (nonfluorous solvent) were selectively extracted to tetradecafluorohexane (fluorous solvent) via the specificity of fluorous affinity by forming a complex with a perfluoropolyethercarboxylic acid-lanthanum(III) salt. The remaining DAGs in the nonfluorous solvent could be directly injected into the LC system through the positive electrospray ionization-MS/MS mode. The removal rate of the phospholipids through the fluorous biphasic extraction was more than 99.9%; thus, the matrix-effect-eliminating analysis of DAGs in human plasma with LC-MS/MS was enabled. Furthermore, the applicability of this method and the possibility of using DAGs as biomarkers were evaluated by applying this method to human plasma samples obtained from major depressive disorder as a related disease.

Detection of Trimethylamine Based on a Manganese Tetraphenylporphyrin Optical Waveguide Sensing Element

The sensitive detection of trimethylamine has been accomplished by using a homogeneous optical waveguide sensor system. Also the sensor can be easily fabricated by using tetraphenylporphyrin manganese (MnTPP) as sensitive materials to detect different volatile organic compounds (VOC). NMR (¹H-NMR), field-emission scanning electron microscopy (FESEM), and X-ray photoelectron spectroscopy (XPS), infrared (IR), and ultraviolet-visible (UV-vis) instrumental means were used to characterize its structure. Gas-sensing measurements indicated that the sensing element has shown good selectivity, high sensitivity and a low detection limit level of 0.1 ppm to trimethylamine (TMA) with the presence of interference gases at room temperature. For a range of trimethylamine concentrations from 0.1 to 1000 ppm, the sensor has shown a short response time. Also the response time and recovery time are 1.5 and 50 s, respectively. Simulation experiments (dichloromethane, chloroform and carbon tetrachloride were selected as interference gases) showed little interference with its gas sensing. That may provide an ideal candidate for detecting the freshness of fish and seafood.

Teflon AF Materials

The unique combination of chemical, thermal, and mechanical stability, high fractional free volume, low refractive index, low surface energy, and wide optical transparency has led to growing interest in Teflon Amorphous Fluoropolymers (AFs) for a wide spectrum of applications ranging from chemical separations and sensors to bioassay platforms. New opportunities arise from the incorporation of nanoscale materials in Teflon AFs. In this chapter, we highlight fractional free volume - the most important property of Teflon AFs - with the aim of clarifying the unique transport behavior through Teflon AF membranes. We then review state-of-the-art developments based on Teflon AF platforms by focusing on the chemistry behind the applications.

Properties and transport behavior of perfluorotripentylamine (FC-70)-doped amorphous teflon AF 2400 films

Teflon AF 2400 films are known to imbibe solvents, making films in the presence of solvents less fluorous than they might otherwise be. Herein, we demonstrate that doping films with perfluorotripentylamine (Fluorinert FC-70) maintains the fluorous nature of Teflon AF 2400 and improves transport selectivity for fluorine-containing organic compounds. Density measurements on the FC-70-doped films reveal that free volume decreases dramatically as the dopant concentration increases (0-12 wt %) and then increases to approach that of pure FC-70. Remarkably, films from 0 to 12 wt % FC-70 have the same w/v concentration of Teflon AF 2400, indicating that FC-70 fills the free volume of Teflon AF 2400. This is consistent with the observed increased storage modulus and significant decrease (compared to undoped films) of solute diffusion coefficients in the same range of FC-70 concentrations. In contrast, FC-70 at concentrations greater than 12 wt % dilutes Teflon AF 2400, leading to a decrease of storage modulus and dramatic increase in solute diffusion coefficients. Sorption of chloroform decreases from 11.8 g of chloroform/100 g of film (pure Teflon film) to 3.8 g of chloroform/100 g of film (27 wt % FC-70-doped Teflon film), less than the solubility of chloroform in pure FC-70 (4.06 g of chloroform/100 g of FC-70). Solute partition coefficients from chloroform to FC-70-doped films generally decrease with increased dopant concentration. However, within a series of toluenes and nitrobenzenes, selectivity for F-containing solutes over analogous H-containing solutes increases as dopant concentration increases if the substitution is on the aromatic ring but not if it is on the methyl group (toluene). Transport (partitioning × diffusion) rates, as they involve both thermodynamic and kinetic factors, are not simply related to composition.