Molecular Dynamics Studies of Hydrated and Dehydrated Na+-Zeolite-4A

Carbon dioxide capture with zeotype materials

This review describes the application of zeotype materials for the capture of CO2 in different scenarios, the critical parameters defining the adsorption performances, and the challenges of zeolitic adsorbents for CO2 capture.

Adsorption of water in Na-LTA zeolites: an ab initio molecular dynamics investigation

The very wide range of applications of LTA zeolites, including the storage of tritiated water, implies that a detailed and accurate atomic-scale description of the adsorption processes taking place in their structure is crucial. To unravel with an unprecedented accuracy the mechanisms behind the water filling in NaA, we have conducted a systematic ab initio molecular dynamics investigation. Two LTA structural models, the conventional Z4A and the reduced one ZK4, have been used for static and dynamic ab initio calculations, respectively. After assessing this reduced model with comparative static DFT calculations, we start the filling of the α and β cages by water, molecule by molecule. This allowed us to thoroughly study the interaction of water molecules with the zeolite structure and between water molecules, progressively forming H-bond chains and ring patterns as the cage is being filled. The adsorption energies could then be calculated with an unprecedented accuracy, which showed that the interaction of the molecules with the zeolite weakens as their number increases. By these methods, we have been able to highlight the primary role of Na⁺ cations in the interaction of water with zeolite, and inversely, the role of water in the displacement of cations when it is sufficiently solvated, allowing the passage between the α and β cages. This phenomenon is possible thanks to the inhomogeneous distribution of water molecules on the cationic sites, as shown by our AIMD simulations, which allows the formation of water clusters. These results are important because they help in understanding how the coverage of cationic sites by water will affect the adsorption of other molecules inside the Na-LTA zeolite.

Connecting theory and simulation with experiment for the study of diffusion in nanoporous solids

Nanoporous solids are ubiquitous in chemical, energy, and environmental processes, where controlled transport of molecules through the pores plays a crucial role. They are used as sorbents, chromatographic or membrane materials for separations, and as catalysts and catalyst supports. Defined as materials where confinement effects lead to substantial deviations from bulk diffusion, nanoporous materials include crystalline microporous zeotypes and metal–organic frameworks (MOFs), and a number of semi-crystalline and amorphous mesoporous solids, as well as hierarchically structured materials, containing both nanopores and wider meso- or macropores to facilitate transport over macroscopic distances. The ranges of pore sizes, shapes, and topologies spanned by these materials represent a considerable challenge for predicting molecular diffusivities, but fundamental understanding also provides an opportunity to guide the design of new nanoporous materials to increase the performance of transport limited processes. Remarkable progress in synthesis increasingly allows these designs to be put into practice. Molecular simulation techniques have been used in conjunction with experimental measurements to examine in detail the fundamental diffusion processes within nanoporous solids, to provide insight into the free energy landscape navigated by adsorbates, and to better understand nano-confinement effects. Pore network models, discrete particle models and synthesis-mimicking atomistic models allow to tackle diffusion in mesoporous and hierarchically structured porous materials, where multiscale approaches benefit from ever cheaper parallel computing and higher resolution imaging. Here, we discuss synergistic combinations of simulation and experiment to showcase theoretical progress and computational techniques that have been successful in predicting guest diffusion and providing insights. We also outline where new fundamental developments and experimental techniques are needed to enable more accurate predictions for complex systems.

Molecular simulation study of the competitive adsorption of H2O and CO2 in zeolite 13X

The presence of H2O in postcombustion gas streams is an important technical issue for deploying CO2-selective adsorbents. Because of its permanent dipole, H2O can interact strongly with materials where the selectivity for CO2 is a consequence of its quadrupole interacting with charges in the material. We performed molecular simulations to model the adsorption of pure H2O and CO2 as well as H2O/CO2 mixtures in 13X, a popular zeolite for CO2 capture processes that is commercially available. The simulations show that H2O reduces the capacity of these materials for adsorbing CO2 by an order of magnitude and that at the partial pressures of H2O relevant for postcombustion capture, 13X will be essentially saturated with H2O .

Molecular dynamics of equilibrium and pressure-driven transport properties of water through LTA-type zeolites

We consider an atomistic model to investigate the flux of water through thin Linde type A (LTA) zeolite membranes with differing surface chemistries. Using molecular dynamics, we have studied the flow of water under hydrostatic pressure through a fully hydrated LTA zeolite film (~2.5 nm thick) capped with hydrophilic and hydrophobic moieties. Pressure drops in the 50-400 MPa range were applied across the membrane, and the flux of water was monitored for at least 15 ns of simulation time. For hydrophilic membranes, water molecules adsorb at the zeolite surface, creating a highly structured fluid layer. For hydrophobic membranes, a depletion of water molecules occurs near the water/zeolite interface. For both types of membranes, the water structure is independent of the pressure drop established in the system and the flux through the membranes is lower than that observed for the bulk zeolitic material; the latter allows an estimation of surface barrier effects to pressure-driven water transport. Mechanistically, it is observed that (i) bottlenecks form at the windows of the zeolite structure, preventing the free flow of water through the porous membrane, (ii) water molecules do not move through a cage in a single-file fashion but rather exhibit a broad range of residence times and pronounced mixing, and (iii) a periodic buildup of a pressure difference between inlet and outlet cages takes place which leads to the preferential flow of water molecules toward the low-pressure cages.

Molecular simulation of water/alcohol mixtures' adsorption and diffusion in zeolite 4A membranes

The COMPASS (condensed-phase optimized molecular potentials for atomistic simulation studies) force field with two sets of partial atomic charges of water was used to simulate adsorption and diffusion behavior of water/methanol and water/ethanol mixtures in zeolite 4A at 298 K. The adsorption of alcohol first increased and then decreased with increasing pressure, whereas the adsorption of water increased progressively until an adsorption equilibrium was reached. Both the adsorbed molecules and the zeolite framework were treated as a fully flexible model in MD simulations. The simulation results show that the effects of the size and steric hindrance of the diffusing molecules on diffusivity are significant. The diffusivity of water, methanol, and ethanol molecules decreases by 1 order of magnitude in the order of water > methanol > ethanol. The diffusivity of water molecules depends on the mass fraction and the partial charges of water in zeolite 4A. The ethanol and methanol molecules have restricted motion through the alpha-cages, whereas the water molecules can easily pass through the alpha-cages window at low feed alcohol concentrations. And the extent of hydrogen bonding increased with increasing water concentration.

Dynamical properties of confined water nanoclusters: Simulation study of hydrated zeolite NaA: structural and vibrational properties

Water nanoclusters confined to zeolitic cavities have been extensively investigated by various experimental techniques. We report a series of molecular dynamics simulations at different temperatures and for water nanoclusters of different sizes in order to attempt an atomistic interpretation of the properties of these systems. The cavities of zeolite NaA are spherical in shape and about 1 nm in diameter and can host nanoclusters of water containing nearly up to 24 water molecules. A modified interaction potential, yielding a better reproduction of experimental hydration energy and water diffusivity across a number of different zeolites, is proposed. Molecular dynamics simulations reproduce the known experimental structural features obtained by X-ray diffraction. Variations of simulated vibrational IR and IINS spectra with temperature and size of nanoclusters are in good agreement with experiment. The simulated water nanoclusters in zeolite NaA are found to be too small to crystallize and, at low temperature, behave as amorphous ice, in agreement with recent experimental results for similar water nanoclusters in reverse micelles.

Neutron spectroscopy of water dynamics in NaX and NaA zeolites

We have investigated the dynamics of water molecules in zeolites NaA and NaX by high-resolution quasielastic neutron scattering methods. Between 260 and 310 K, the local translational diffusive motion of water in the zeolites is one to two orders of magnitude slower than in bulk water. The Q dependence of the scattering shows effects of confinement and the presence of both relatively mobile and immobile molecules. The speed of the diffusive motion depends strongly on hydration level. Comparison with other hydrated siliceous materials indicates that the host charge per water molecule is a major factor in determining the time scale of diffusion.

Modelling studies of water in crystalline nanoporous aluminosilicates

The paper presents a review of molecular modelling studies of hydrated nanoporous aluminosilicates (zeolites and clays) performed during the last decade. A special emphasis is set on the calculation of the dynamical quantities and collective properties of the confined water. Some new results concerning the behaviour of water molecules in the siliceous silicalite and zeolite beta structures are presented.

Gibbs ensemble Monte Carlo simulation of supercritical CO2 adsorption on NaA and NaX zeolites

Adsorption of supercritical carbon dioxide on two kinds of zeolites with identical chemical composition but different pore structure (NaA and NaX) was studied using the Gibbs ensemble Monte Carlo simulation. The model frameworks for the two zeolites with SiAl ratio being unity have been chosen as the solid structures in the simulation. The adsorption behaviors of supercritical CO2 on the NaA and NaX zeolites, based on the adsorption isotherms and isosteric heats of adsorption, were discussed in detail and were compared with the available experimental results. A good agreement between the simulated and experimental results is obtained for both the adsorbed amount and the bulk phase density. The intermediate configurational snapshots and the radial distribution functions between zeolite and adsorbed CO2 molecules were collected in order to investigate the preferable adsorption locations and the confined structure behavior of CO2. The structure behaviors of the adsorbed CO2 molecules show various performances, as compared with the bulk phase, due to the confined effect in the zeolite pores.

The Reaction of Acetylene with Hydroxyl Radicals

The potential energy surface for the reaction between OH and acetylene has been calculated using the RQCISD(T) method and extrapolated to the complete basis-set limit. Rate coefficients were determined for a wide range of temperatures and pressures, based on this surface and the solution of the one-dimensional and two-dimensional master equations. With a small adjustment to the association energy barrier (1.1 kcal/mol), agreement with experiments is good, considering the discrepancies in such data. The rate coefficient for direct hydrogen abstraction is significantly smaller than that commonly used in combustion models. Also in contrast to previous models, ketene + H is found to be the main product at normal combustion conditions. At low temperatures and high pressures, stabilization of the C2H2OH adduct is the dominant process. Rate coefficient expressions for use in modeling are provided.

Predicting the structure of screw dislocations in nanoporous materials

Extended microscale crystal defects, including dislocations and stacking faults, can radically alter the properties of technologically important materials. Determining the atomic structure and the influence of defects on properties remains a major experimental and computational challenge. Using a newly developed simulation technique, the structure of the 1/2a <100> screw dislocation in nanoporous zeolite A has been modelled. The predicted channel structure has a spiral form that resembles a nanoscale corkscrew. Our findings suggest that the dislocation will enhance the transport of molecules from the surface to the interior of the crystal while retarding transport parallel to the surface. Crucially, the dislocation creates an activated, locally chiral environment that may have enantioselective applications. These predictions highlight the influence that microscale defects have on the properties of structurally complex materials, in addition to their pivotal role in crystal growth.