Networks of Quantum Nanodots: The Role of Disorder in Modifying Electronic and Optical Properties

Three-dimensional self-assembly of chalcopyrite copper indium diselenide nanocrystals into oriented films

CuInSe2, which is one of the highest efficiency thin-film solar cell active layer materials, has been an attractive target for nanocrystal synthesis and manipulation. Here, we report unprecedented, simultaneous control of the synthesis and self-assembly behavior of CuInSe2 nanocrystals. These nanocrystals are solution-processable, monodisperse tetragonal bipyramids that exhibit photoconductivity and self-assemble into crystallographically oriented thin films. Structural characterization indicates that these nanocrystals are tetragonal phase, as is used in high-efficiency, second-generation, thin-film solar cells. Elemental analysis indicates that approximately 1:1:2 Cu/In/Se stoichiometry can be achieved, and that the elemental composition can be adjusted from copper-rich to indium-rich with reaction time.

Quantum-dot-sensitized solar cells

Quantum-dot-sensitized solar cells (QDSCs) are a promising low-cost alternative to existing photovoltaic technologies such as crystalline silicon and thin inorganic films. The absorption spectrum of quantum dots (QDs) can be tailored by controlling their size, and QDs can be produced by low-cost methods. Nanostructures such as mesoporous films, nanorods, nanowires, nanotubes and nanosheets with high microscopic surface area, redox electrolytes and solid-state hole conductors are borrowed from standard dye-sensitized solar cells (DSCs) to fabricate electron conductor/QD monolayer/hole conductor junctions with high optical absorbance. Herein we focus on recent developments in the field of mono- and polydisperse QDSCs. Stability issues are adressed, coating methods are presented, performance is reviewed and special emphasis is given to the importance of energy-level alignment to increase the light to electric power conversion efficiency.

Colloidal lithography and current fabrication techniques producing in-plane nanotopography for biological applications

Substrate topography plays a vital role in cell and tissue structure and function in situ, where nanometric features, for example, the detail on single collagen fibrils, influence cell behaviour and resultant tissue formation. In vitro investigations demonstrate that nanotopography can be used to control cell reactions to a material surface, indicating its potential application in tissue engineering and implant fabrication. Developments in the catalyst, optical, medical and electronics industries have resulted in the production of nanopatterned surfaces using a variety of methods. The general protocols for nanomanufacturing require high resolution and low cost for fabricating devices. With respect to biological investigations, nanotopographies should occur across a large surface area (ensuring repeatability of experiments and patterning of implant surfaces), be reproducible (allowing for consistency in experiments), and preferably, accessible (limiting the requirement for specialist equipment). Colloidal lithography techniques fit these criteria, where nanoparticles can be utilized in combination with a functionalized substrate to produce in-plane nanotopographies. Subsequent lithographic processing of colloidal substrates utilizing, for example, reactive ion etching allows the production of modified colloidal-derived nanotopographies. In addition to two-dimensional in-plane nanofabrication, functionalized structures can be dip coated in colloidal sols, imparting nanotopographical cues to cells within a three-dimensional environment.

Influence of intense pulsed laser irradiation on optical and morphological properties of gold nanoparticle aggregates produced by surface acid-base reactions

Gold nanoparticles were surface modified with an ionizable and pH-sensitive monolayer of thiobarbituric acid (TBA). By variation of the pH value of the solution, nanoparticle aggregates can be produced in a controlled way. The aggregates thus prepared were irradiated with an intense pulsed laser at 532 nm. The products in solution were examined by transmission electron microscopy (TEM) and optical absorption spectroscopy. The TEM images of the products revealed that the nanoparticle aggregates dissociate upon laser irradiation and form much smaller gold nanoparticles. The optical absorption spectra measured simultaneously show the gradual disappearance of the absorbance band of the aggregates at around 680 nm. Additionally, a blue shift (from 534 to 524 nm) of the resonance absorbance corresponding to isolated nanoparticles has been observed. All the observations suggest that the colloidal solution becomes more stable after laser irradiation. Both the reduced nanoparticle size and the stabilizing TBA ligands present on the particle surface contribute to the acquired stability of the colloidal solutions.

Dynamical self-assembly of nanocrystal superlattices during colloidal droplet evaporation by in situ small angle x-ray scattering

The nucleation and growth kinetics of highly ordered gold nanocrystal superlattices during the evaporation of nanocrystal colloidal droplets was elucidated by in situ time-resolved small-angle x-ray scattering. We demonstrated for the first time that the evaporation rate can affect the dimensionality of the superlattices. The formation of two-dimensional nanocrystal superlattices at the liquid-air interface of the droplet has exponential growth kinetics that originates from interface crushing.

Immobilization of the nanoparticle monolayer onto self-assembled monolayers by combined sterically enhanced hydrophobic and electrophoretic forces

The immobilization of surface-derivatized gold nanoparticles onto methyl-terminated self-assembled monolayers (SAMs) on gold surface was achieved by the cooperation of hydrophobic and electrophoretic forces. Electrochemical and scanning probe microscopy techniques were utilized to explore the influence of the SAM's structure and properties of the nanoparticle/SAM/gold system. SAMs prepared from 1-decanethiol (DT) and 2-mercapto-3-n-octylthiophene (MOT) were used as hydrophobic substrates. The DT SAM is a closely packed and organized monolayer, which can effectively block the underlying gold and inhibit a variety of solution species including organic and inorganic molecules from penetrating, whereas the MOT monolayer is poorly packed or disorganized (because of a large difference in dimension between the thiophene head and the alkylchain tail) and permeable to many organic probes in aqueous solution but not to inorganic probes. Thus, the MOT monolayer provides a more energetically favorable hydrophobic surface for the penetration and adsorption of organic species than the DT monolayer. This hypothesis is supported by experiments in which the density of hydrophobically immobilized nanoparticles on the MOT SAM is much larger than that on the DT SAM. The results also suggest new approaches for modification of macroscopic surfaces with nanoscopic particles.

Orbital picture of ionization and its breakdown in nanoarrays of quantum dots

We present exact numerical results indicating that ionization could be a useful tool to study electron correlations in artificial molecules and nanoarrays of metallic quantum dots. For nanorings consisting of Ag quantum dots of the type already fabricated, we demonstrate that the molecular orbital picture breaks down even for lowest energy ionization processes, in contrast to ordinary molecules. Our ionization results yield a transition point between localization and delocalization regimes in good agreement with various experimental data.

Architecture with designer atoms: simple theoretical considerations

The distinct electronic states of assemblies of metallic quantum dots are discussed in a simple approximation where each dot is mimicked as an "atom" that carries one valence electron. Because of their large size, the charging energy of the dots, I = energy required to add another electron, is much smaller than for ordinary atoms. The Coulomb blocking of charge migration is therefore easier to overcome. For the theory, however, this is a challenge, because ionic states, which are typically higher in energy, come down, so the density of electronic states is high, and special methods need to be adapted. Quantum dots are prepared by wet chemical methods and accordingly are not quite identical. They will have a size distribution that can be narrow (when the dots can be assembled into an ordered array) or broad. Other sources of disorder are packing imperfections, which are characteristic of a wider size distribution, ligand deformations, and chemical unevenness. Two experimental control parameters are the size of the dots and the spacing between them. We discuss the combined effects of the low charging energy and disorder and examine the distinct electronic phases that can be realized.