Chemisorption of Organics on Platinum. 2. Chemisorption of C2Hx and CHx on Pt(111)

Molecular mechanisms of methane dry reforming on Co3Mo3N catalyst with dual sites

With density functional theory and microkinetic modeling, mechanisms responsible for the promoted dry reforming of methane (DRM) reactivity and coke resistance on the dual-site Co₃Mo₃N(111) surface are explained.

Reaction mechanism and kinetics for ammonia synthesis on the Fe(211) reconstructed surface

To provide guidelines to accelerate the Haber-Bosch (HB) process for synthesis of ammonia from hydrogen and nitrogen, we used Quantum Mechanics (QM) to determine the reaction mechanism and free energy reaction barriers under experimental reaction conditions (400 °C and 20 atm) for all 10 important surface reactions on the Fe(211) reconstructed (Fe(211)R) surface. These conditions were then used in full kMC modeling for 30 minutes to attain steady state. We find that the stable surface under Haber-Bosch conditions is the missing row 2 × 1 reconstructed surface (211)R and that the Turn Over Frequency (TOF) is 18.7 s^-1 per 2 × 2 surface site for 1.5 Torr NH₃ pressure, but changes to 3.5 s^-1 for 1 atm, values close (within 6%) to the ones on Fe(111). The experimental ratio between (211) and (111) rates at low (undisclosed) NH₃ pressure was reported to be 0.75. The excellent agreement with experiment on two very different surfaces and reaction mechanisms is a testament of the accuracy of QM modeling. In addition, our kinetic analysis indicates that Fe(211)R is more active than Fe(111) at high pressure, close to HB industrial conditions, and that (211)R is more abundant than (111) via a steady-state Wulff construction under HB conditions. Thus, at variance with common thinking, we advocate the Fe(211)R surface as the catalytically active phase of pure iron ammonia synthesis catalyst under HB industrial conditions.

Investigation on the conversion of ethylene to ethylidyne on Pt(100) and Pd(100) using density functional theory

The comprehensive formation network of ethylidyne (CH₃C) from ethylene (CH₂CH₂) is investigated on Pt(100) and Pd(100) using the density functional theory method. The structural and energetic features of all intermediate products were considered. We found that the trend of the activation barriers in each pathway on Pt(100) and Pd(100) are the same, whereas the barriers on Pt(100) are higher than that on Pd(100). The activation barriers of 1,2-H shift reactions are relatively high compared with the other reactions. We screened three possible pathways and selected the optimal route as CH₂CH₂(ethylene) → CH₂CH(vinyl) → CH₂C(vinylidene) → CH₃C(ethylidyne).

Nitrite reduction mechanism on a Pd surface

Nitrate (NO3-) is one of the most harmful contaminants in the groundwater, and it causes various health problems. Bimetallic catalysts, usually palladium (Pd) coupled with secondary metallic catalyst, are found to properly treat nitrate-containing wastewaters; however, the selectivity toward N2 production over ammonia (NH3) production still requires further improvement. Because the N2 selectivity is determined at the nitrite (NO2-) reduction step on the Pd surface, which occurs after NO3- is decomposed into NO2- on the secondary metallic catalyst, we here performed density functional theory (DFT) calculations and experiments to investigate the NO2- reduction pathway on the Pd surface activated by hydrogen. Based on extensive DFT calculations on the relative energetics among ∼100 possible intermediates, we found that NO2- is easily reduced to NO* on the Pd surface, followed by either sequential hydrogenation steps to yield NH3 or a decomposition step to N* and O* (an adsorbate on Pd is denoted using an asterisk). Based on the calculated high migration barrier of N*, we further discussed that the direct combination of two N* to yield N2 is kinetically less favorable than the combination of a highly mobile H* with N* to yield NH3. Instead, the reduction of NO2- in the vicinity of the N* can yield N2O* that can be preferentially transformed into N2 via diverse reaction pathways. Our DFT results suggest that enhancing the likelihood of N* encountering NO2- in the solution phase before combination with surface H* is important for maximizing the N2 selectivity. This is further supported by our experiments on NO2- reduction by Pd/TiO2, showing that both a decreased H2 flow rate and an increased NO2- concentration increased the N2 selectivity (78.6-93.6% and 57.8-90.9%, respectively).

Density functional theory study of CHx (x=1–3) adsorption on clean and CO precovered Rh(111) surfaces

CH(x) (x=1-3) adsorptions on clean and CO precovered Rh(111) surfaces were studied by density functional theory calculations. It is found that CH(x) (x=1-3) radicals prefer threefold hollow sites on Rh(111) surfaces, and the bond strength between CH(x) and Rh(111) follows the order of CH(3)<CH(2)<CH. A slight attraction between adsorbed CH(x) and CH(x), CH(x) and CO, CO and CO radicals/molecules at coverage of 1/9-1/4 ML is found, and considerable repulsion is built up at coverage higher than 1/4 ML. It is found that CH(x) adsorption results in the reduction of work function due to charge transfer from the adsorbates to the substrate. For CH(3) adsorption, charge accumulation between the substrate and carbon atom is identified, which results in C-H stretch mode softening. For CO precovered surfaces, the mode softening is prevented due to the weakened interaction between CH(x) and substrates from repulsive interaction between adsorbates. Conversely, the overall charge transfer from the CH(x) (x=1-3) to the substrate enhances the charge back donation from the substrate to the empty antibonding states of adsorbed carbon monoxide, which results in the softness of the C-O stretch, respectively. The C 1s surface core-level shifts for CH(x) with and without the presence of CO were calculated, and a negative shift with respect to the carbon in atop CO on Rh(111) is found, and the negative shift follows the order of CO<CH(3)<CH(2)<CH. The results are analyzed in details by difference of charge density and projected density of states.

Interface between platinum(111) and liquid isopropanol (2-propanol): A model for molecular dynamics studies

A molecular dynamics model and its parametrization procedure are devised and used to study adsorption of isopropanol on platinum(111) (Pt(111)) surface in unsaturated and oversaturated coverages regimes. Static and dynamic properties of the interface between Pt(111) and liquid isopropanol are also investigated. The magnitude of the adsorption energy at unsaturated level increases at higher coverages. At the oversaturated coverage (multilayer adsorption) the adsorption energy reduces, which coincides with findings by Panja et al. in their temperature-programed desorption experiment [Surf. Sci. 395, 248 (1998)]. The density analysis showed a strong packing of molecules at the interface followed by a depletion layer and then by an oscillating density profile up to 3 nm. The distribution of individual atom types showed that the first adsorbed layer forms a hydrophobic methyl "brush." This brush then determines the distributions further from the surface. In the second layer methyl and methine groups are closer to the surface and followed by the hydroxyl groups; the third layer has exactly the inverted distribution. The alternating pattern extends up to about 2 nm from the surface. The orientational structure of molecules as a function of distance of molecules is determined by the atom distribution and surprisingly does not depend on the electrostatic or chemical interactions of isopropanol with the metal surface. However, possible formation of hydrogen bonds in the first layer is notably influenced by these interactions. The surface-adsorbate interactions influence the mobility of isopropanol molecules only in the first layer. Mobility in the higher layers is independent of these interactions.

Methane Activation on Pt and Pt4: A Density Functional Theory Study

The activation mechanisms of a methane molecule on a Pt atom (CH4-Pt) and on a Pt tetramer (CH4-Pt4) were investigated using density functional theory (B3LYP and PW91) calculations. The results from these two functionals are different mostly in predicting the reaction barrier, in particular for the CH4-Pt system. A new lower energy pathway was identified for the CH4 dehydrogenation on a Pt atom. In the new pathway, the PtCH2 + H2 products were formed via a transition state, in which the Pt atom forms a complex with carbene and both dissociated hydrogen atoms. We report here the first theoretical study of methane activation on a Pt4 cluster. Among the five single steps toward dehydrogenation, our results show that the rate-limiting step is the third step, that is, breaking the second C-H bond, which requires overcoming an energy barrier of 28 kcal/mol. On the other hand, the cleavage of the first C-H bond, that is, the first reaction step, requires overcoming an energy barrier of 4 kcal/mol.

Theory of C2Hx species on Pt{110} (1×2): Reaction pathways for dehydrogenation

A complete reaction sequence for molecular dissociation at a surface has been characterized using density functional theory. The barriers for sequential ethane dehydrogenation on Pt{110} are found to fall into distinct energy sets: very low barriers, with values in the range of 0.29-0.42 eV, for the initial ethane dissociation to ethene and ethylidene at the surface; medium barriers, in the range of 0.72-1.10 eV, for dehydrogenation of C(2)H(4) fragments to vinylidene and ethyne; and high barriers, requiring more than 1.45 eV, for further dehydrogenation. For dissociation processes where more than one pathway has been found, the lowest energetic route links the most stable reactant adsorbed state at the surface to a product state involving the hydrocarbon moiety adsorbed in its most stable configuration at the surface. Hence there is a clear link between surface stability and kinetics for these species.

Methane oxidation mechanism on Pt(111): a cluster model DFT study

The electronic energy barriers of surface reactions pertaining to the mechanism of the electrooxidation of methane on Pt (111) were estimated with density functional theory calculations on a 10-atom Pt cluster, using both the B3LYP and PW91 functionals. Optimizations of initial and transition states were performed for elementary steps that involve the conversion of CH(4) to adsorbed CO at the Pt/vacuum interface. As a first approximation we do not include electrolyte effects in our model. The reactions include the dissociative chemisorption of CH(4) on Pt, dehydrogenation reactions of adsorbed intermediates (*CH(x) --> *CH(x-1) + *H and *CH(x)O --> *CH(x-1)O + *H), and oxygenation reactions of adsorbed CH(x) species (*CH(x) + *OH --> *CH(x)OH). Many pathways were investigated and it was found that the main reaction pathway is CH(4) --> *CH(3) --> *CH(2) --> *CH --> *CHOH --> *CHO --> *CO. Frequency analysis and transition-state theory were employed to show that the methane chemisorption elementary step is rate-limiting in the above mechanism. This conclusion is in agreement with published experimental electrochemical studies of methane oxidation on platinum catalysts that have shown the absence of an organic adlayer at electrode potentials that allow the oxidation of adsorbed CO. The mechanism of the electrooxidation of methane on Pt is discussed.

Computational Study of Multiple-Decker Sandwich and Rice-Ball Structures of Neutral Titanium−Benzene Clusters

Density functional theory calculations were applied to systematically and directly compare the relative energetic stability of multiple-decker sandwich and rice-ball structures for a variety of neutral Ti(m)Bz(n) clusters (m = 1-4, n = 1-5). Almost all structures favored the multiple-decker sandwich structure, as observed experimentally for early transition metals. The strength of each metal-benzene interaction averages 37 kcal/mol and remains relatively constant for sandwiches with three or more Ti atoms. The most stable smaller rice-ball structures did not have eta(6)-Bz bound to a single metal atom. Instead, the preferred coordination was having the plane of the benzene molecule parallel to a Ti(2) bond or a Ti(3) face, leading to some distortion of the benzene ring. The larger rice-ball structures, on the other hand, preferred to weaken the metal-metal bonds and retain eta(6)-Bz bound to a single metal atom, a structural motif shared with sandwiches.

Theory of C2Hx Species on Pt{110}(1 × 2): Structure, Stability, and Thermal Chemistry

The adsorption of C2Hx (x=0-5) hydrocarbon fragments on Pt{110}(1x2) has been investigated using calculations based on density functional theory. For all the species, the most stable adsorption site identified completes the tetravalency of each carbon atom and involves the maximum possible number of Pt atoms subject to that constraint. The most stable adsorption sites for C2Hx fragments of stoichiometry x=2-5 involve ridge atoms, while trough sites stabilize C2H and C2 species. The relative stability of the fragments involved is compared via a free energy picture.

In Situ Soft X-ray Studies of Ethylene Oxidation Mechanisms and Intermediates on the Pt(111) Surface

In situ studies of ethylene oxidation on Pt(111) have been performed using a powerful combination of fluorescence yield soft X-ray methods for temperatures up to 600 K and oxygen pressures up to 0.01 Torr. Absolute carbon coverages have been determined both in steady-state and dynamic catalytic conditions on the Pt(111) surface. Fluorescence yield near-edge spectroscopy (FYNES) and temperature-programmed fluorescence yield near-edge spectroscopy (TP-FYNES) experiments above the carbon K edge were used to identify the structure and bonding of the dominant surface species during oxidation. TP-FYNES experiments of preadsorbed ethylene coverages in oxygen pressures up to 0.01 Torr indicate a stable intermediate is formed over the 215-300 K temperature range. By comparing the intensity of the C-H sigma resonance at the magic angle with the intensity in the carbon continuum, the stoichiometry of this intermediate has been determined explicitly. Based on calibration with known C-H stoichiometries, the intermediate has a C(2)H(3) stoichiometry for oxygen pressures up to 0.01 Torr, indicating oxydehydrogenation occurs before skeletal oxidation. FYNES spectra at normal and glancing incidences were performed to characterize the structure and bonding of this intermediate. Using FYNES spectra of ethylene, ethylidyne, and acetylene as reference standard, this procedure indicates the oxidation intermediate is tri-sigma vinyl. Thus, oxidation of ethylene proceeds through a vinyl intermediate, with oxydehydrogenation preceding skeletal oxidation.

Chemisorption of (CHx and C2Hy) Hydrocarbons on Pt(111) Clusters and Surfaces from DFT Studies

We used the B3LYP flavor of density functional theory (DFT) to study the chemisorption of all CH(x) and C(2)H(y) intermediates on the Pt(111) surface. The surface was modeled with the 35 atom Pt(14.13.8) cluster, which was found to be reliable for describing all adsorption sites. We find that these hydrocarbons all bind covalently (sigma-bonds) to the surface, in agreement with the studies by Kua and Goddard on small Pt clusters. In nearly every case the structure of the adsorbed hydrocarbon achieves a saturated configuration in which each C is almost tetrahedral with the missing H atoms replaced by covalent bonds to the surface Pt atoms. Thus, (Pt(3))CH prefers a mu(3) hollow site (fcc), (Pt(2))CH(2) prefers a mu(2) bridge site, and PtCH(3) prefers mu(1) on-top sites. Vinyl leads to (Pt(2))CH-CH(2)(Pt), which prefers a mu(3) hollow site (fcc). The only exceptions to this model are ethynyl (CCH), which binds as (Pt(2))C=CH(Pt), retaining a CC pi-bond while binding at a mu(3) hollow site (fcc), and HCCH, which binds as (Pt)HC=CH(Pt), retaining a pi bond that coordinates to a third atom of a mu(3) hollow site (fcc) to form an off center structure. These structures are in good agreement with available experimental data. For all species we calculated heats of formation (DeltaH(f)) to be used for considering various reaction pathways on Pt(111). For conditions of low coverage, the most strongly bound CH(x) species is methylidyne (CH, BE = 146.61 kcal/mol), and ethylidyne (CCH(3), BE = 134.83 kcal/mol) among the C(2)H(y) molecules. We find that the net bond energy is nearly proportional to the number of C-Pt bonds (48.80 kcal/mol per bond) with the average bond energy decreasing slightly with the number of C ligands.

Electronic structure and catalysis on metal surfaces

The powerful computational resources available to scientists today, together with recent improvements in electronic structure calculation algorithms, are providing important new tools for researchers in the fields of surface science and catalysis. In this review, we discuss first principles calculations that are now capable of providing qualitative and, in many cases, quantitative insights into surface chemistry. The calculations can aid in the establishment of chemisorption trends across the transition metals, in the characterization of reaction pathways on individual metals, and in the design of novel catalysts. First principles studies provide an excellent fundamental complement to experimental investigations of the above phenomena and can often allow the elucidation of important mechanistic details that would be difficult, if not impossible, to determine from experiments alone.