Catalytically Active Oxygen Species in La1-xSrxCoO3-δ Studied by XPS and XAFS Spectroscopy

Effects of Using Aluminum Sulfate as an Accelerator and Acrylic Acid, Aluminum Fluoride, or Alkanolamine as a Regulator in Early Cement Setting

Aluminum sulfate was employed as the main accelerator in order to explore new non-chloride and alkali-free cement accelerators. Acrylic acid, aluminum fluoride, or alkanolamine were used as regulators to further accelerate cement setting. The setting time, compressive, and flexural strengths in cement early strength progress were detected, and both the cement (raw material) and hydrated mortar were fully characterized. The cement setting experiments revealed that only loading acrylic acid as the regulator would decrease the setting time of cement and increase the compressive and flexural strengths of mortar, but further introduction of aluminum fluoride or alkanolamine improved this process drastically. In the meantime, structural characterizations indicated that the raw material (cement) used in this work was composed of C₃S (alite), while hydrated mortar consisted of quartz and C₃A (tricalcium aluminate). During this transformation, the coordination polyhedron of Al³⁺ was changed from a tetrahedron to octahedron. This work puts forward a significant strategy for promoting the activity of aluminum sulfate in cement setting and would contribute to the future design of new non-chloride and alkali-free cement accelerators.

Enhanced catalytic activity of perovskite La1−xSrxMnO3+δ for the oxygen reduction reaction

The relationship between the ORR catalytic activity of LaMnO3+δ and its Mn–O bond length was examined by replacing La with Sr, and it was found that the shorter the bond length, the higher the activity.

Enhancing the Intrinsic Activity and Stability of Perovskite Cobaltite at Elevated Temperature Through Surface Stress

Perovskite-based oxides attract great attention as catalysts for energy and environmental devices. Nanostructure engineering is demonstrated as an effective approach for improving the catalytic activity of the materials. The mechanism for the enhancement, nevertheless, is still not fully understood. In this study, it is demonstrated that compressive strain can be introduced into freestanding perovskite cobaltite La_0.8 Sr_0.2 CoO_{3- δ} (LSC) nanofibers with sufficient small size. Crystal structure analysis suggests that the LSC fiber is characterized by compressive strain along the ab plane and less distorted CoO₆ octahedron compared to the bulk powder sample. Accompanied by such structural changes, the nanofiber shows significantly higher oxygen reduction reaction (ORR) activity and better stability at elevated temperature, which is attributed to the higher oxygen vacancy concentration and suppressed Sr segregation in the LSC nanofibers. First-principle calculations further suggest that the compressive strain in LSC nanofibers effectively shortens the distance between the Co 3d and O 2p band center and lowers the oxygen vacancy formation energy. The results clarify the critical role of surface stress in determining the intrinsic activity of perovskite oxide nanomaterials. The results of this work can help guide the design of highly active and durable perovskite catalysts via nanostructure engineering.

Precursor accumulation on nanocarbons for the synthesis of LaCoO3 nanoparticles as electrocatalysts for oxygen evolution reaction

Oxygen evolution reaction (OER) is a key step in energy storage devices. Lanthanum cobaltite (LaCoO₃) perovskite is an active catalyst for OER in alkaline solutions, and it is expected to be a low-cost alternative to the state-of-the-art catalysts (IrO₂ and RuO₂) because transition metals are abundant and inexpensive. For efficient catalysis with LaCoO₃, nanosized LaCoO₃ with a high surface area is desirable for increasing the number of catalytically active sites. In this study, we developed a novel synthetic route for LaCoO₃ nanoparticles by accumulating the precursor molecules over nanocarbons. This precursor accumulation (PA) method for LaCoO₃ nanoparticle synthesis is simple and involves the following steps: (1) a commercially available carbon powder is soaked in a solution of the nitrate salts of lanthanum and cobalt and (2) the sample is dried and calcined in air. The LaCoO₃ nanoparticles prepared by the PA method have a high specific surface area (12 m² g⁻¹), comparable to that of conventional LaCoO₃ nanoparticles. The morphology of the LaCoO₃ nanoparticles is affected by the nanocarbon type, and LaCoO₃ nanoparticles with diameters of less than 100 nm were obtained when carbon black (Ketjen black) was used as the support. Further, the sulfur impurities in nanocarbons significantly influence the formation of the perovskite structure. The prepared LaCoO₃ nanoparticles show excellent OER activity owing to their high surface area and perovskite structure. The Tafel slope of these LaCoO₃ nanoparticles is as low as that of the previously reported active LaCoO₃ catalyst. The results strongly suggest that the PA method provides nanosized LaCoO₃ without requiring the precise control of chemical reactions, harsh conditions, and/or special apparatus, indicating that it is promising for producing active OER catalysts at a large scale.

A simple synthetic process for LaCoO₃ nanoparticles based on the accumulation of precursors on nanocarbon supports was presented. The LaCoO₃ nanoparticles showed excellent OER activity owing to their high surface area and perovskite structure.

Effect of grain boundaries in La0.84Sr0.16CoO3-δ on oxygen diffusivity and surface exchange kinetics

The single crystal and polycrystalline specimens of La0.84Sr0.16CoO3-δ oxide were synthesized and characterized by X-ray powder diffraction analysis, energy dispersive X-ray microanalysis, the electron backscatter diffraction technique, and X-ray photoelectron spectroscopy. A thin slab was prepared from the grown single crystal with its surface corresponding to the (110) plane. The kinetics of the oxygen exchange between the gas phase and a single crystal and a polycrystalline specimen was studied by means of 16O/18O oxygen isotope exchange at T = 750-850 °C and PO2 = 5.3 × 10-3-2.2 × 10-2 atm. Temperature dependencies of the oxygen heterogeneous exchange rate, the oxygen dissociative adsorption and incorporation rates, and oxygen diffusion coefficients were obtained. The relationship between the crystallographic orientation of oxides and the kinetic parameters of oxides has been established. Correlations between the surface state and the rates of individual stages of oxygen exchange as well as oxygen diffusion pathways in the single crystal compared with those in the polycrystalline specimen are considered.

Aqueous Room Temperature Mono-Dehydration of Sugar Alcohols Using Functionalized Yttrium Oxide Nanocatalysts

The aqueous room temperature mono-dehydration of sugar alcohols (D-sorbitol and D-mannitol) was conducted using functionalized yttrium oxide nanocatalysts prepared via sol-gel methods. Materials exhibited high selectivity to mono-dehydration products. Solvent and catalyst effects were also investigated and discussed. The introduction of titanium into the yttrium oxide framework would decrease both substrate conversion and mono-dehydration efficiency. In addition, studies of the catalytic mechanism indicate high mono-dehydration efficiency may come from the stability of the formed intermediate during catalysis. This work provides a highly efficient and benign system for catalytic mono-dehydration of sugar alcohols.

Electric Field and Mobile Oxygen Promote Low-Temperature Oxidative Coupling of Methane over La1-x Ca x AlO3-δ Perovskite Catalysts

Oxidative coupling of methane (OCM) over La_1-x M _x AlO_3-δ (M = Ca, Sr, Ba; x = 0, 0.1, 0.2, 0.3) in an electric field at low temperature (423 K) was investigated. Among the tested catalysts, the La_0.7Ca_0.3AlO_3-δ catalyst showed the highest performance in terms of C₂H₆ + C₂H₄ yield (11.1%). Surface mobile oxygen species (O₂ ^2- or O^-), which were considered as active oxygen species for the OCM reaction, increased with increasing Ca doping amount, and thereby the La_0.7Ca_0.3AlO_3-δ catalyst showed the best catalytic activity.

Molten Salt Flux Synthesis, Crystal Facet Design, Characterization, Electronic Structure, and Catalytic Properties of Perovskite Cobaltite

We present a simple and cost-effective molten salt synthetic route toward phase-pure perovskite cobaltite microcrystallines and successfully regulate different crystal facets for perovskite LaCoO₃ by the strong interaction between Cl^- anions and Sr²⁺ cations in molten salt system and polar plane. We then take LaCoO₃ (100 and 110), LaCoO₃ (111), and La_0.7Sr_0.3CoO₃ (111) as comparison models, and we characterize their crystal structure, morphology, composition, electronic state, and catalytic properties. X-ray photoelectron spectroscopy (XPS) shows that the prepared samples with high-energy (111) crystal facets contain more surface oxygen species and active Co ions than La enrichment perovskite LaCoO₃ (110 and 100) on the surface. Furthermore, combining with ambient-pressure XAS, valence band spectroscopy, and density functional calculations, we find that exposed high-energy (111) crystal facets and doping Sr ions can enhance the hybridization between Co cations and O anions and their O p-band center is closer to the Fermi level, compared with that of LaCoO₃ (100 and 110). As expected, the samples with high-energy (111) crystal facets show better CO oxidation activity than LaCoO₃ (100 and 110), and La_0.7Sr_0.3CoO₃ (111) exhibits the highest catalytic activity. Our findings provide a new avenue to prepare high-energy facet perovskite catalysts and we also clearly reveal the relationship between surface electronic structure and intrinsic CO oxidation activity of perovskite cobaltite.

Efficient Visible-Light-Driven CO2 Reduction Mediated by Defect-Engineered BiOBr Atomic Layers

Solar CO₂ reduction efficiency is largely limited by poor photoabsorption, sluggish electron-hole separation, and a high CO₂ activation barrier. Defect engineering was employed to optimize these crucial processes. As a prototype, BiOBr atomic layers were fabricated and abundant oxygen vacancies were deliberately created on their surfaces. X-ray absorption near-edge structure and electron paramagnetic resonance spectra confirm the formation of oxygen vacancies. Theoretical calculations reveal the creation of new defect levels resulting from the oxygen vacancies, which extends the photoresponse into the visible-light region. The charge delocalization around the oxygen vacancies contributes to CO₂ conversion into COOH* intermediate, which was confirmed by in situ Fourier-transform infrared spectroscopy. Surface photovoltage spectra and time-resolved fluorescence emission decay spectra indicate that the introduced oxygen vacancies promote the separation of carriers. As a result, the oxygen-deficient BiOBr atomic layers achieve visible-light-driven CO₂ reduction with a CO formation rate of 87.4 μmol g^-1  h^-1 , which was not only 20 and 24 times higher than that of BiOBr atomic layers and bulk BiOBr, respectively, but also outperformed most previously reported single photocatalysts under comparable conditions.

Oxygen defect engineering by the current effect assisted with temperature cycling in a perovskite-type La0.7Sr0.3CoO3 film

Introducing and modulating the oxygen deficiency concentration have been received as an effective way to obtain high catalytic activity in perovskite oxides. However, it is difficult to control the oxygen vacancy in conventional oxygen defect engineering due to harsh reaction conditions at elevated temperatures and the reducing atmosphere, which make it impractical for many technological applications. Herein, we report a new approach to oxygen defect engineering based on the combination of the current effect and temperature cycling at low temperature. Our investigations revealed that the electrical conductivity of the (011)-La_0.7Sr_0.3CoO₃/PMN-PT film changes continuously from metallicity to insulativity under repeated transport measurements below room temperature, which indicates the transformation of the Co⁴⁺ state to Co³⁺ in the film. Further experiments and analysis revealed that oxygen vacancies can be well regulated by the combined current effect and temperature cycling in repeated measurements, which results in a decrease of Co⁴⁺/Co³⁺ and thus the remarkable variation of conductive properties of the film. Our work provides a simple and highly efficient method to engineer oxygen vacancies in perovskite-type oxides and brings new opportunities in designing high-efficiency oxidation catalysts.

Electrostatic versus Electrochemical Doping and Control of Ferromagnetism in Ion-Gel-Gated Ultrathin La0.5Sr0.5CoO3-δ

Recently, electrolyte gating techniques employing ionic liquids/gels in electric double layer transistors have proven remarkably effective in tuning charge carrier density in a variety of materials. The ability to control surface carrier densities at levels above 10(14) cm(-2) has led to widespread use in the study of superconductivity, insulator-metal transitions, etc. In many cases, controversy remains over the doping mechanism, however (i.e., electrostatic vs electrochemical (e.g., redox-based)), and the technique has been less applied to magnetic materials. Here, we discuss ion gel gating of nanoscale 8-unit-cell-thick hole-doped La0.5Sr0.5CoO3-δ (LSCO) films, probing in detail the critical bias windows and doping mechanisms. The LSCO films, which are under compressive stress on LaAlO3(001) substrates, are metallic and ferromagnetic (Curie temperature, TC ∼ 170 K), with strong anomalous Hall effect and perpendicular magnetic anisotropy. Transport measurements reveal that negative gate biases lead to reversible hole accumulation (i.e., predominantly electrostatic operation) up to some threshold, whereas positive bias immediately induces irreversibility. Experiments in inert/O2 atmospheres directly implicate oxygen vacancies in this irreversibility, supported by atomic force microscopy and X-ray photoelectron spectroscopy. The results are thus of general importance, suggesting that hole- and electron-doped oxides may respond very differently to electrolyte gating. Reversible voltage control of electronic/magnetic properties is then demonstrated under hole accumulation, including resistivity, magnetoresistance, and TC. The sizable anomalous Hall coefficient and perpendicular anisotropy in LSCO provide a particularly powerful probe of magnetism, enabling direct extraction of the voltage-dependent order parameter and TC shift. The latter amounts to ∼7%, with potential for much stronger modulation at lower Sr doping.

Water electrolysis on La(1-x)Sr(x)CoO(3-δ) perovskite electrocatalysts

Perovskite oxides are attractive candidates as catalysts for the electrolysis of water in alkaline energy storage and conversion systems. However, the rational design of active catalysts has been hampered by the lack of understanding of the mechanism of water electrolysis on perovskite surfaces. Key parameters that have been overlooked include the role of oxygen vacancies, B–O bond covalency, and redox activity of lattice oxygen species. Here we present a series of cobaltite perovskites where the covalency of the Co–O bond and the concentration of oxygen vacancies are controlled through Sr²⁺ substitution into La_1−xSr_xCoO_3−δ. We attempt to rationalize the high activities of La_1−xSr_xCoO_3−δ through the electronic structure and participation of lattice oxygen in the mechanism of water electrolysis as revealed through ab initio modelling. Using this approach, we report a material, SrCoO_2.7, with a high, room temperature-specific activity and mass activity towards alkaline water electrolysis.

Perovskite oxides are attractive candidates as catalysts for water electrolysis however their rational design is rare. Here, the authors report a series of cobaltite perovskites where the covalency of the Co-O bond and concentration of oxygen vacancies are controlled, and assess their catalytic performance.

Operando and in situ X-ray spectroscopies of degradation in La0.6Sr0.4Co0.2Fe0.8O(3-δ) thin film cathodes in fuel cells

Information from ex situ characterization can fall short in describing complex materials systems simultaneously exposed to multiple external stimuli. Operando X-ray absorption spectroscopy (XAS) was used to probe the local atomistic and electronic structure of specific elements in a La0.6Sr0.4Co0.2Fe0.8O(3-δ) (LSCF) thin film cathode exposed to air contaminated with H2O and CO2 under operating conditions. While impedance spectroscopy showed that the polarization resistance of the LSCF cathode increased upon exposure to both contaminants at 750 °C, XAS near-edge and extended fine structure showed that the degree of oxidation for Fe and Co decreases with increasing temperature. Synchrotron-based X-ray photoelectron spectroscopy tracked the formation and removal of a carbonate species, a Co phase, and different oxygen moieties as functions of temperature and gas. The combined information provides insight into the fundamental mechanism by which H2O and CO2 cause degradation in the cathode of solid oxide fuel cells.

Growth, microstructure, and infrared-ultraviolet optical conductivity of La(0.5)Sr(0.5)CoO(3) nanocrystalline films on silicon substrates by pulsed laser deposition

La(0.5)Sr(0.5)CoO(3) (LSCO) nanocrystalline (nc) films have been directly grown on silicon wafers under different substrate temperatures by pulsed laser deposition. The X-ray diffraction analysis indicate that the films are polycrystalline with the pure perovskite phase at higher substrate temperatures. The columnar growth formation with the nanocrystalline structure in the films has been confirmed by microscopy experiments. Infrared-ultraviolet optical properties of the LSCO films have been investigated with the aid of spectroscopic ellipsometry (SE). Dielectric function in the photon energy range of 1.1-3.1 eV (400-1100 nm) has been extracted by reproducing the experimental data with a Lorentz oscillator model. It is found that the real part is decreased from 4.7 to -0.7 at the near-infrared region with increasing substrate temperature. The optical conductivity shows a different variation trend for the lower and higher growth temperatures, respectively. Note that the films deposited above 650 degrees C exhibit the well-defined metallic phase behavior. The discrepancies could be mainly ascribed to different crystalline structure and surface morphology. The present results may be crucial for future applications of ferromagnetic-based optoelectronic and spin-electronic devices.