Direct Observation of Gigahertz Coherent Guided Acoustic Phonons in Free-Standing Single Copper Nanowires

Mode specific dynamics for the acoustic vibrations of a gold nanoplate

The vibrational modes of semiconductor and metal nanostructures occur in the MHz to GHz frequency range, depending on dimensions. These modes are at the heart of nano-optomechanical devices, and understanding how they dissipate energy is important for applications of the devices. In this paper ultrafast transient absorption microscopy has been used to examine the breathing modes of a single gold nanoplate, where up to four overtones were observed. Analysis of the frequencies and amplitudes of the modes using a simple continuum mechanics model shows that the system behaves as a free plate, even though it is deposited onto a surface with no special preparation. The overtones decay faster than the fundamental mode, which is not predicted by continuum mechanics calculations of mode damping due to radiation of sound waves. Possible reasons for this effect include frequency dependent thermoelastic effects in the nanoplate, and/or flow of acoustic energy out of the excitation region.

Picosecond ultrasonics with a free-running dual-comb laser

We present a free-running 80-MHz dual-comb polarization-multiplexed solid-state laser which delivers 1.8 W of average power with 110-fs pulse duration per comb. With a high-sensitivity pump-probe setup, we apply this free-running dual-comb laser to picosecond ultrasonic measurements. The ultrasonic signatures in a semiconductor multi-quantum-well structure originating from the quantum wells and superlattice regions are revealed and discussed. We further demonstrate ultrasonic measurements on a thin-film metalized sample and compare these measurements to ones obtained with a pair of locked femtosecond lasers. Our data show that a free-running dual-comb laser is well-suited for picosecond ultrasonic measurements and thus it offers a significant reduction in complexity and cost for this widely adopted non-destructive testing technique.

Correlative Imaging of Motoneuronal Cell Elasticity by Pump and Probe Spectroscopy

Because of their role of information transmitter between the spinal cord and the muscle fibers, motor neurons are subject to physical stimulation and mechanical property modifications. We report on motoneuron elasticity investigated by time-resolved pump and probe spectroscopy. A dual picosecond geometry simultaneously probing the acoustic impedance mismatch at the cell-titanium transducer interface and acoustic wave propagation inside the motoneuron is presented. Such noncontact and nondestructive microscopy, correlated to standard atomic force microscopy or a fluorescent labels approach, has been carried out on a single cell to address some physical properties such as bulk modulus of elasticity, dynamical longitudinal viscosity, and adhesion.

Giant extraordinary transmission of acoustic waves through a nanowire

Wave concentration beyond the diffraction limit by transmission through subwavelength structures has proved to be a milestone in high-resolution imaging. Here, we show that a sound wave incident inside a solid over a diameter of 110 nm can be squeezed through a resonant meta-atom consisting of a nanowire with a diameter of 5 nm equal to λ/23, where λ is the incident acoustic wavelength, corresponding to a transmission efficiency of 500 or an energy densification of ~14,000. This remarkable level of extraordinary acoustic transmission is achieved in the absence of ultrasonic attenuation by connecting a tungsten nanowire between two tungsten blocks, the block on the input side being furnished with concentric grooves. We also demonstrate that these "solid organ pipes" exhibit Rayleigh end corrections to their effective longitudinal resonant lengths notably larger than their in-air analogs. Grooves on the output side lead to in-solid directed acoustic beams, important for nanosensing.

Ultrafast measurements of the dynamics of single nanostructures: a review

The ability to study single particles has revolutionized nanoscience. The advantage of single particle spectroscopy measurements compared to conventional ensemble studies is that they remove averaging effects from the different sizes and shapes that are present in the samples. In time-resolved experiments this is important for unraveling homogeneous and inhomogeneous broadening effects in lifetime measurements. In this report, recent progress in the development of ultrafast time-resolved spectroscopic techniques for interrogating single nanostructures will be discussed. The techniques include far-field experiments that utilize high numerical aperture (NA) microscope objectives, near-field scanning optical microscopy (NSOM) measurements, ultrafast electron microscopy (UEM), and time-resolved x-ray diffraction experiments. Examples will be given of the application of these techniques to studying energy relaxation processes in nanoparticles, and the motion of plasmons, excitons and/or charge carriers in different types of nanostructures.

Controlling the Quality Factor of a Single Acoustic Nanoresonator by Tuning its Morphology

The mechanical vibrations of individual gold nanodisks nanopatterned on a sapphire substrate are investigated using ultrafast time-resolved optical spectroscopy. The number and characteristics of the detected acoustic modes are found to vary with nanodisk geometry. In particular, their quality factors strongly depend on nanodisk aspect ratio (i.e., diameter over height ratio), reaching a maximal value of ≈70, higher than those previously measured for substrate-supported nano-objects. The peculiarities of the detected acoustic vibrations are confirmed by finite-element simulations, and interpreted as the result of substrate-induced hybridization between the vibrational modes of a nanodisk. The present findings demonstrate novel possibilities for engineering the vibrational modes of nano-objects.

Coherent Phonon Transport Measurement and Controlled Acoustic Excitations Using Tunable Acoustic Phonon Source in GHz-sub THz Range with Variable Bandwidth

We experimentally demonstrated a narrowband acoustic phonon source with simultaneous tunabilities of the centre frequency and the spectral bandwidth in the GHz-sub THz frequency range based on photoacoustic excitation using intensity-modulated optical pulses. The centre frequency and bandwidth are tunable from 65 to 381 GHz and 17 to 73 GHz, respectively. The dispersion of the sound velocity and the attenuation of acoustic phonons in silicon dioxide (SiO₂) and indium tin oxide (ITO) thin films were investigated using the acoustic phonon source. The sound velocities of SiO₂ and ITO films were frequency-independent in the measured frequency range. On the other hand, the phonon attenuations of both of SiO₂ and ITO films showed quadratic frequency dependences, and polycrystalline ITO showed several times larger attenuation than those in amorphous SiO₂. In addition, the selective excitation of mechanical resonance modes was demonstrated in nanoscale tungsten (W) film using acoustic pulses with various centre frequencies and spectral widths.

On the measurement of relaxation times of acoustic vibrations in metal nanowires

Energy relaxation of the breathing modes of metal nanostructures is controlled by radiation of sound waves in the environment.

Spatiotemporal Imaging of the Acoustic Field Emitted by a Single Copper Nanowire

The monochromatic and geometrically anisotropic acoustic field generated by 400 and 120 nm diameter copper nanowires simply dropped on a 10 μm silicon membrane is investigated in transmission using three-dimensional time-resolved femtosecond pump-probe experiments. Two pump-probe time-resolved experiments are carried out at the same time on both sides of the silicon substrate. In reflection, the first radial breathing mode of the nanowire is excited and detected. In transmission, the longitudinal and shear waves are observed. The longitudinal signal is followed by a monochromatic component associated with the relaxation of the nanowire's first radial breathing mode. Finite difference time domain (FDTD) simulations are performed and accurately reproduce the diffracted field. A shape anisotropy resulting from the large aspect ratio of the nanowire is detected in the acoustic field. The orientation of the underlying nanowires is thus acoustically deduced.

Nondestructive Complete Mechanical Characterization of Zinc Blende and Wurtzite GaAs Nanowires Using Time-Resolved Pump-Probe Spectroscopy

We have developed and demonstrated an experimental method, based on the picosecond acoustics technique, to perform nondestructive complete mechanical characterization of nanowires, that is, the determination of the complete elasticity tensor. By means of femtosecond pump-probe spectroscopy, coherent acoustic phonons were generated in an ensemble of nanowires and their dynamics was resolved. Specific phonon modes were identified and the detection mechanism was addressed via wavelength dependent experiments. We calculated the exact phonon dispersion relation of the nanowires by fitting the experimentally observed frequencies, thus allowing the extraction of the complete elasticity tensor. The elasticity tensor and the nanowire diameter were determined for zinc blende GaAs nanowires and were found to be in a good agreement with literature data and independent measurements. Finally, we have applied this technique to characterize wurtzite GaAs nanowires, a metastable phase in bulk, for which no experimental values of elastic constants are currently available. Our results agree well with previous first principle calculations. The proposed approach to the complete and nondestructive mechanical characterization of nanowires will allow the efficient mechanical study of new crystal phases emerging in nanostructures, as well as size-dependent properties of nanostructured materials.

Optical tracking of picosecond coherent phonon pulse focusing inside a sub-micron object

By means of an ultrafast optical technique, we track focused gigahertz coherent phonon pulses in objects down to sub-micron in size. Infrared light pulses illuminating the surface of a single metal-coated silica fibre generate longitudinal-phonon wave packets. Reflection of visible probe light pulses from the fibre surface allows the vibrational modes of the fibre to be detected, and Brillouin optical scattering of partially transmitted light pulses allows the acoustic wavefronts inside the transparent fibre to be continuously monitored. We thereby probe acoustic focusing in the time domain resulting from generation at the curved fibre surface. An analytical model, supported by three-dimensional simulations, suggests that we have followed the focusing of the acoustic beam down to a ~150-nm diameter waist inside the fibre. This work significantly narrows the lateral resolution for focusing of picosecond acoustic pulses, normally limited by the diffraction limit of focused optical pulses to ~1 μm, and thereby opens up a new range of possibilities including nanoscale acoustic microscopy and nanoscale computed tomography.

Imaging nano-objects by linear and nonlinear optical absorption microscopies

Absorption based microscopy measurements are emerging as important tools for studying nanomaterials. This review discusses the three most common techniques for performing these experiments: transient absorption microscopy, photothermal heterodyne imaging, and spatial modulation spectroscopy. The focus is on the application of these techniques to imaging and detection, using examples taken from the authors' laboratory. The advantages and disadvantages of the three methods are discussed, with an emphasis on the unique information that can be obtained from these experiments, in comparison to conventional emission or scattering based microscopy experiments.

Compressible Viscoelastic Liquid Effects Generated by the Breathing Modes of Isolated Metal Nanowires

Transient absorption microscopy is used to examine the breathing modes of single gold nanowires in highly viscous liquids. By performing measurements on the same wire in air and liquid, the damping contribution from the liquid can be separated from the intrinsic damping of the nanowire. The results show that viscous liquids strongly reduce the vibrational lifetimes but not to the extent predicted by standard models for nanomaterial-liquid interactions. To explain these results a general theory for compressible viscoelastic fluid-structure interactions is developed. The theory results are in good agreement with experiment, which confirms that compressible non-Newtonian flow phenomena are important for vibrating nanostructures. This is the first theoretical study and experimental measurement of the compressible viscoelastic properties of simple liquids.