Synthesis of Porous Single-Crystalline Platinum Nanocubes Composed of Nanoparticles

Pt Nanoparticles with High Oxidase-Like Activity and Reusability for Detection of Ascorbic Acid

Noble metal nanoenzymes such as Pt, Au, Pd, etc. exhibit magnificent activity. However, due to the scarce reserves and expensive prices of precious metals, it is essential to investigate their enzyme-like activity and explore the possibility of their reuse. In this work, the oxidase-like activity and reusability of several Pt nanoparticles with different morphologies were detected. We compared the Pt nanoparticles (NPs) with a size of about 30 nm self-assembled by 5 nm Pt nanoparticles and Pt nanoparticles (Pt-0 HCl) with a diameter of about 5 nm, and found that their Michaelis-Menten constants (Km) were close and their initial performance similar, but the Pt NPs had better reusability. This was probably attributed to the stacked structure of Pt NPs, which was conducive to the substance transport and sufficient contact. At the same time, it was found that the size, dispersion, and organic substances adsorbed on the surface of Pt nanoparticles would have a significant impact on their reusability. A colorimetric detection method was designed using the oxidase-like activity of Pt NPs to detect ascorbic acid in triplicate. The limits of detection were 131 ± 15, 144 ± 14, and 152 ± 9 nM, with little difference. This research not only showed that the morphology of the catalyst could be changed and its catalytic performance could be controlled by a simple liquid phase synthesis method, but also that it had great significance for the reuse of Pt nanoenzymes in the field of bioanalysis.

Shape Controlled Plasmonic Sn Doped CdO Colloidal Nanocrystals: A Synthetic Route to Maximize the Figure of Merit of Transparent Conducting Oxide

The synthesis of different anisotropic shaped (eight different shapes) Sn⁴⁺ doped CdO (Sn:CdO) colloidal nanocrystals (NCs) by precise tuning of precursor reactivity and proper choice of capping agent is reported. In all these systems, formation of Sn:CdO quantum dots (QDs) of 2-3 nm is identified at very early stage of reaction. The colloidally stable QDs act as a continuous source for the formation of primary nanoparticles that can be transformed selectively into specific type of nanoparticle morphology. The specific facet stabilization of fcc (face centered cubic)CdO is predicted by particular choice of ligand. Fine tuning of plasmonic absorbance band can be achieved by variation of Sn⁴⁺ doping concentration. Different anisotropic Sn:CdO NCs exhibit interesting shape dependent plasmonic absorbance features in NIR region. High quality crack free uniform dense thin film has been deposited on glass substrate to make high quality transparent conducting oxide (TCO) coatings. figure of merit of TCO can be maximized as high as 0.523 Ω^-1 with conductivity of 43 600 S cm^-1 and visible transmittance of ≈85% which is much higher than commercially available tin doped indium oxide and other transparent electrodes.

Large-scale template-free synthesis of ordered mesoporous platinum nanocubes and their electrocatalytic properties

Here we report a facile, one-pot and template-free approach to synthesize mesoporous monocrystalline Pt nanocubes with uniform shapes and sizes, in which small Pt particles with a size of ∼5 nm are three-dimensionally and periodically built up into cubes with a size of ∼50 nm. The forming process is illustrated through a novel meso-crystal self-assembly mechanism. Very interestingly, the mesoporous structures are ordered, which are thought to be beneficial to increase their catalytic activity. Compared with nonporous Pt nanoparticles and porous Pt nanoparticles without order, the ordered mesoporous Pt nanocubes exhibit a highly improved electrocatalytic ability for methanol and formic acid oxidation, and are potentially applicable as electrocatalysts for direct methanol and formic acid fuel cells. Furthermore, this approach can be used to synthesize other Pt-series metallic mesoporous nanoparticles, such as Pd.

Synthesis of sub-nanosized Pt particles on mesoporous SBA-15 material and its application to the CO oxidation reaction

In this work, we show that the size and shape of Pt nanoparticles in SBA-15 can be controlled through vacuum and air calcination. The vacuum-calcination/H2-reduction process is used to thermally treat a 0.2 wt% Pt(4+)/SBA-15 sample to obtain small 2D clusters and single atoms that can significantly increase Pt dispersion in SBA-15. Compared with thermal treatments involving air-calcination/H2-reduction, which result in ∼4.6 nm rod-like Pt particles, vacuum-calcination/H2-reduction can dramatically reduce the size of the Pt species to approximately 0.5-0.8 nm. The Pt particles undergoing air-calcination/H2-reduction have poor conversion efficiency because the fraction of terrace sites, the major sites for CO oxidation, on the rod-like Pt particles is small. In contrast, a large amount of low-coordinated Pt sites associated with 2D Pt species and single Pt atoms in SBA-15 is effectively generated through the vacuum-calcination/H2-reduction process, which may facilitate CO adsorption and induce strong reactivity toward CO oxidation. We investigated the effect of vacuum-calcination/H2-reduction on the formation of tiny 2D clusters and single atoms by characterizing the particles, elucidating the mechanism of formation, determining the active sites for CO oxidation and measuring the heat of CO adsorption.

Using structural diversity to tune the catalytic performance of Pt nanoparticle ensembles

While reducing the size, and restricting shape of nanocatalysts can improve performance, monodispersed samples are not necessarily ideal.

Synthesis and characterization of Pt nanoparticles with different morphologies in mesoporous silica SBA-15 for methanol oxidation reaction

Mesoporous SBA-15 silica materials functionalized with and without carboxylic acid groups were used to effectively control the morphology of Pt crystals, and the materials thus obtained were applied to methanol oxidation reactions. The Pt particles aggregated to form long spheroids inside the channels in pure SBA-15. When carboxylic acid groups were utilized, the SBA-15(-COOH) material facilitated the formation of higher Pt surface area, smaller Pt nanoparticles and nearly spherical shape due to the strong interaction between Pt(4+) ions and carboxylic acid on SBA-15. The Pt(4+) ions on the SBA-15(-COOH) material can be directly transformed to reduced Pt particles during calcination. The methanol oxidation activity on a Pt surface is strongly dependent on the shape of Pt particles. The near-spherical Pt nanoparticles on the SBA-15(-COOH) exhibited higher catalytic activity during methanol oxidation than Pt catalysts on unmodified SBA-15. The near-spherical Pt particles on the SBA-15(-COOH) contained large numbers of terrace sites on their surfaces, which led to high efficiency during methanol oxidation.

Mesoporous nano/micro noble metal particles: synthesis and applications

The morphology, size and composition often govern the physical and chemical properties of noble metal units with a size in the nano or micro scale. Thus, the controlled growth of noble metal crystals would help to tailor their unique properties and this would be followed by their practical application. Mesoporous nano/micro noble metal units are types of nanostructured material that have fascinating properties that can generate great potential for various applications. This review presents a general view on the growth mechanisms of porous noble metal units and is focused on recent progresses in their synthetic approaches. Then, their potential applications in the field of drug delivery, cell imaging and SERS substrates, as well as fuel cell catalysts are overviewed.

Investigation into the catalytic activity of porous platinum nanostructures

The catalytic activity of porous platinum nanostructures, viz. platinum nanonets (PtNNs) and platinum nanoballs (PtNBs), synthesized by radiolysis were studied using two model reactions (i) electron transfer reaction between hexacyanoferrate (III) and sodium thiosulfate and (ii) the reduction of p-nitrophenol by sodium borohydride to p-aminophenol. The kinetic investigations were carried out for the platinum nanostructure-catalyzed reactions at different temperatures. The pseudofirst-order rate constant for the electron transfer reaction between hexacyanoferrate (III) and sodium thiosulfate catalyzed by PtNNs and PtNBs at 293 K are (9.1 ± 0.7) × 10(-3) min(-1) and (16.9 ± 0.6) × 10(-3) min(-1), respectively. For the PtNN- and PtNB-catalyzed reduction of p-nitrophenol to p-aminophenol by sodium borohydride, the pseudofirst-order rate constant was (8.4 ± 0.3) × 10(-2) min(-1) and (12.6 ± 2.5) × 10(-2) min(-1), respectively. The accessible surface area of the PtNNs and PtNBs determined before the reaction are 99 and 110 m(2)/g, respectively. These nanostructures exhibit significantly higher catalytic activity, consistent with the largest accessible surface area reported so far for the solid platinum nanoparticles. The equilibrium of the reactants on the surface of the platinum nanostructures played an important role in the induction time (t0) observed in the reaction. A possible role of structural modifications of PtNBs catalyzed the reaction leading to change in the accessible surface area of PtNBs is being explored to explain the nonlinear behavior in the kinetic curve. The activation energy of the PtNN- and PtNB-catalyzed reduction of p-nitrophenol are 26 and 6.4 kJ/mol, respectively. These observations open up new challenges in the field of material science to design and synthesize platinum nanostructures which could withstand such reaction conditions.

Synthesis of colloidal metal and metal alloy nanoparticles for electrochemical energy applications

This Review is focused on the recent progresses in the synthetic approaches to the precise control of structure, size, shape, composition and multi-functionality of metal and metal alloy nanoparticles. Many of these strategies have been developed based on colloidal methods, and to limited extent, the galvanic and other methods. The shape, size and composition often govern the chemical and catalytic properties that are important for electrochemical energy applications. The structure-property relationship and the design in controllable structures and morphologies for specific reactions such as oxygen reduction reaction (ORR) are emphasized.

Polyallylamine-directed green synthesis of platinum nanocubes. Shape and electronic effect codependent enhanced electrocatalytic activity

The synthesis of Pt nanocrystals with controlled size and morphology has drawn enormous interest due to their particular catalytic activity. We present a facile and green hydrothermal method for synthesizing monodisperse Pt nanocubes (Pt-NCs) with polyallylamine hydrochloride (PAH) as a complex-forming agent, capping agent and facet-selective agent, and formaldehyde as a reductant. The formation mechanism, particle size and surface composition of the Pt-NCs were investigated by Ultraviolet and visible spectroscopy (UV-vis), Fourier transform infrared (FT-IR), transmission electron microscopy (TEM), selected area electron diffraction (SAED), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS), etc. In the proposed PAH-K(2)PtCl(4)-HCHO synthesis system, the raw material could be reutilized to re-synthesize the Pt-NCs, and the particle size of the Pt-NCs could be readily controlled by the reduction rate of the Pt(II) species in the Pt(II)-PAH complex. After UV/Ozone and electrochemical cleaning, the residual PAH on the Pt-NC surfaces still strongly influenced the d-band centre of Pt due to the strong N-Pt interaction. The as-prepared 6 nm Pt-NCs showed superior electrocatalytic activity (mass activity and specific activity) and stability towards the oxygen reduction reaction (ORR) in both H(2)SO(4) and HClO(4) electrolytes compared to the commercial E-TEK Pt black, owing to the combination of the facets effect and electronic effect.

Recent progress in the synthesis of inorganic nanoparticles

Nanoparticles probably constitute the largest class of nanomaterials. Nanoparticles of several inorganic materials have been prepared by employing a variety of synthetic strategies. Besides synthesizing nanoparticles, there has been considerable effort to selectively prepare nanoparticles of different shapes. In view of the great interest in inorganic nanoparticles evinced in the last few years, we have prepared this perspective on the present status of the synthesis of inorganic nanoparticles. This article includes a brief discussion of methods followed by reports on the synthesis of nanoparticles of various classes of inorganic materials such as metals, alloys, oxides chalcogenides and pnictides. A brief section on core-shell nanoparticles is also included.

Mesocrystals: syntheses in metals and applications

Self-assembly of nanoparticles has emerged as a powerful technique to integrate nanoparticles into well-defined ensembles with collective properties that are different from those of individual nanoparticles and bulk materials with the same chemical composition. Compared with the classical ion/molecule-mediated crystal growth, particle-mediated crystallographically ordered self-assembly is considered as "non-classical crystallization" and the resultant product is termed a "mesocrystal". In this tutorial review, we begin by summarizing the progresses of this field during last decade. Secondly, we outline developments in related fields such as grain rotation and oriented attachment as well as mesocrystals. Thridly, the recent progress in the syntheses of mesocrystals particularly in metals, and the related properties are introduced. Finally, some of the current open questions are discussed.

Shape control of platinum and palladium nanoparticles for catalysis

Platinum and palladium are important catalysts for a wide variety of industrial processes. With the increasing demands of these materials, the development of high-performance catalysts is an important area of research, and as a result, shape control synthesis has become one of the leading research focuses. This minireview surveys the different approaches in solution-phase synthesis that have been successfully adopted for achieving shaped platinum and palladium nanoparticles that are enclosed with specific crystallographic facets. In addition, catalytic studies of the shaped nanoparticles are highlighted, in which promising results have been reported in terms of enhanced activity and selectivity. The future outlook discusses the aspects in synthesis and catalysis to be considered for the development of highly efficient and effective catalysts.