Study of molecular interactions between a phospholipidic layer and a pH-sensitive polymer using the Langmuir balance technique

Switchable Lipids: From Conformational Switch to Macroscopic Changes in Lipid Vesicles

It has been shown that the use of conformationally pH-switchable lipids can drastically enhance the cytosolic drug delivery of lipid vesicles. Understanding the process by which the pH-switchable lipids disturb the lipid assembly of nanoparticles and trigger the cargo release is crucial to optimize the rational design of pH-switchable lipids. Here, we gather morphological observations (FF-SEM, Cryo-TEM, AFM, confocal microscopy), physicochemical characterization (DLS, ELS), as well as phase behavior studies (DSC, ²H NMR, Langmuir isotherm, and MAS NMR) to propose a mechanism of pH-triggered membrane destabilization. We demonstrate that the switchable lipids are homogeneously incorporated with other co-lipids (DSPC, cholesterol, and DSPE-PEG₂₀₀₀) and promote a liquid-ordered phase insensitive to temperature variation. Upon acidification, the protonation of the switchable lipids triggers a conformational switch altering the self-assembly properties of lipid nanoparticles. These modifications do not lead to a phase separation of the lipid membrane; however, they cause fluctuations and local defects, which result in morphological changes of the lipid vesicles. These changes are proposed to affect the permeability of vesicle membrane, triggering the release of the cargo encapsulated in the lipid vesicles (LVs). Our results confirm that pH-triggered release does not require major morphological changes, but can result from small defects affecting the lipid membrane permeability.

Magnetic Thermosensitive Liposomes Loaded with Doxorubicin

Liposome-mediated anticancer drug delivery has the advantage of limiting the massive cytotoxicity of chemotherapeutic agents. Doxorubicin (DOX) PEG-liposomal does however have a slow-release rate that hinders its therapeutic efficacy. In this study, an integrated therapeutic system based on magnetic thermosensitive liposomes was designed. The chelated gadolinium acquired magnetic properties in the liposomes. The hyperthermia induced by ultra-high-field magnetic resonance imaging (UHF-MRI) enhances the chemotherapeutic effects of DOX. The DOX release from liposomes was facilitated over a narrow range of temperatures owing to the phase transition temperature of the liposomes. The magnetic properties of the liposomes were evident by the elevation of contrast after the exposure to UHF-MRI. Moreover, triple-negative breast cancer (TNBC) cells showed a significant decrease in cellular viability reaching less than 40% viability after 1 h of exposure to UHF-MRI. The liposomes demonstrated a physiological coagulation time and a minimal hemolytic potential in hemocompatibility studies; therefore, they were considered safe for physiological application. As a result, magnetic-thermosensitive liposomal guidance of local delivery of DOX could increase the therapeutic index, thereby reducing the amount of the drug required for systemic administration and the chance of affecting the adjacent tissues.

A Review of Phospholipid Encapsulated Ultrasound Contrast Agent Microbubble Physics

Ultrasound contrast agent microbubbles have expanded the utility of biomedical ultrasound from anatomic imaging to the assessment of microvascular blood flow characteristics and ultrasound-assisted therapeutic applications. Central to their effectiveness in these applications is their resonant and non-linear oscillation behaviour. This article reviews the salient physics of an oscillating microbubble in an ultrasound field, with particular emphasis on phospholipid-coated agents. Both the theoretical underpinnings of bubble vibration and the experimental evidence of non-linear encapsulated bubble dynamics and scattering are discussed and placed within the context of current and emerging applications.

The Role of Microbubble Echo Phase Lag in Multipulse Contrast-Enhanced Ultrasound Imaging

In this paper, we assess the importance of microbubble shell composition for contrast-enhanced imaging sequences commonly used on clinical scanners. While the gas core dynamics are primarily responsible for the nonlinear harmonic response of microbubbles at diagnostic pressures, it is now understood that the shell rheology plays a dominant role in the nonlinear response of microbubbles subjected to low acoustic pressures. Of particular interest here, acoustic pressures of tens of kilopascal can cause a reversible phase transition of the phospholipid coatings from a stiff elastic organized state to a less stiff disorganized buckled state. Such a transition from elastic to buckled shell induces a steep variation of the shell elasticity, which alters the microbubble acoustic scattering properties. We demonstrate in this paper that this mechanism plays a dominant role in contrast pulse sequences that modulate the amplitude of the insonifying pulse pressure. The contrast-to-tissue ratio (CTR) for amplitude modulation (AM), pulse inversion (PI), and amplitude modulation pulse inversion (AMPI) is measured in vitro for Definity, Sonazoid, both lipid-encapsulted microbubbles, and the albumin-coated Optison. It is found that pulse sequences using AM significantly enhanced the nonlinear response of all studied microbubbles compared to PI (up to 15 dB more) when low insonation pressures under 200 kPa were used. Further investigation reveals that the origin of the hyperechoicity is a small phase lag occurring between the echoes from the full-and half-amplitude driving pulses, and that the effect could be attributed to the shell softening dynamics of lipid and albumin coatings. We assess that this additional phase in microbubble ultrasound scattering can have a dominant role in the CTR achieved in contrast sequences using AM. We also show that the pressure dependent phase lag is a specific marker for microbubbles with no equivalent in tissue, which can be used to segment microbubbles from the tissue harmonics and significantly increase the CTR.

Serum-Stable, Long-Circulating, pH-Sensitive PEGylated Liposomes

pH-sensitive liposomes have been designed to deliver active compounds, specifically to acidic intracellular organelles, and to augment their cytoplasmic concentrations. These systems combine the protective effects of other liposomal formulations with specific environment-controlled drug release. They are stable at physiological pH, but abruptly discharge their contents when endocytosed into acidic compartments, allowing the drug to be released before it is exposed to the harsh environment of the lysosomes.Serum-stable formulations with minimal leakage at physiological pH and rapid drug release at pH 5.0 to 5.5 can be easily prepared by inserting a hydrophobically modified N-isopropylacrylamide/methacrylic acid copolymer (poly(NIPAM-co-MAA)) in the lipid bilayer of sterically stabilized liposomes. The present chapter describes polymer synthesis, as well as the preparation and characterization of large unilamellar pH-sensitive vesicles.

Insight into the Modification of Polymeric Micellar and Liposomal Nanocarriers by Fluorescein-Labeled Lipids and Uptake-Mediating Lipopeptides

Encapsulation of diagnostic and therapeutic compounds in transporters improves their delivery to the point of need. An even more efficient treatment of diseases can be achieved using carriers with targeting or protecting moieties. In the present work, we investigated micellar and liposomal nanocarriers modified with fluorescein, peptides, and polymers that are covalently bound to fatty acids or phospholipids to ensure a self-driven incorporation into the micelles or liposomes. First, we characterized the photophysics of the fluorescent probes in the absence and in the presence of nanocarriers. Changes in the fluorescence decay time, quantum yield, and intensity of a fluorescein-labeled fatty acid (fluorescein-labeled palmitic acid [fPA]) and a fluorescein-labeled lipopeptide (P2fA2) were found. By exploiting these changes, we investigated a lipopeptide (P2A2 as an uptake-mediating unit) in combination with different nanocarriers (micelles and liposomes) and determined the corresponding association constant Kass values, which were found to be very high. In addition, the mobility of fPA was exploited using fluorescence correlation spectroscopy (FCS) and fluorescence depolarization (FD) experiments to characterize the nanocarriers. Cellular uptake experiments with mouse brain endothelial cells provided information on the uptake behavior of liposomes modified by uptake-mediating P2A2 and revealed differences in the uptake behavior between pH-sensitive and pH-insensitive liposomes.

Small molecule therapeutic-loaded liposomes as therapeutic carriers: from development to clinical applications

In this review, various methods and mechanisms for encapsulation of small therapeutic molecules in liposomes for targeted delivery and triggered release, as well as their potential in the clinical uses, are discussed.

Measuring absolute blood pressure using microbubbles

Gas microbubbles are highly compressible, which makes them very efficient sound scatterers. As another consequence of their high compressibility, the radii of the microbubbles are affected by the pressure of the fluid around them, which changes their resonance frequency. Although the pressures present within the human body cause only minor variations in the radii of uncoated microbubbles (∼0.2% per 10 mmHg) and, therefore, very small variations in the resonance frequency (∼1 kHz per 10 mmHg), it was found in the work described here, through both simulations and in vitro measurements, that large changes in resonance frequency can occur in phospholipid-coated microbubbles for small blood pressure variations because of the exotic buckling dynamics of phospholipid monolayers (up to 240 kHz per 10 mmHg). This method should allow non-invasive measurement of the gauge blood pressure in deep blood vessels as long as the microbubble physical properties are well controlled.

Bursting bubbles and bilayers

This paper discusses various interactions between ultrasound, phospholipid monolayer-coated gas bubbles, phospholipid bilayer vesicles, and cells. The paper begins with a review of microbubble physics models, developed to describe microbubble dynamic behavior in the presence of ultrasound, and follows this with a discussion of how such models can be used to predict inertial cavitation profiles. Predicted sensitivities of inertial cavitation to changes in the values of membrane properties, including surface tension, surface dilatational viscosity, and area expansion modulus, indicate that area expansion modulus exerts the greatest relative influence on inertial cavitation. Accordingly, the theoretical dependence of area expansion modulus on chemical composition - in particular, poly (ethylene glyclol) (PEG) - is reviewed, and predictions of inertial cavitation for different PEG molecular weights and compositions are compared with experiment. Noteworthy is the predicted dependence, or lack thereof, of inertial cavitation on PEG molecular weight and mole fraction. Specifically, inertial cavitation is predicted to be independent of PEG molecular weight and mole fraction in the so-called mushroom regime. In the “brush” regime, however, inertial cavitation is predicted to increase with PEG mole fraction but to decrease (to the inverse 3/5 power) with PEG molecular weight. While excellent agreement between experiment and theory can be achieved, it is shown that the calculated inertial cavitation profiles depend strongly on the criterion used to predict inertial cavitation. This is followed by a discussion of nesting microbubbles inside the aqueous core of microcapsules and how this significantly increases the inertial cavitation threshold. Nesting thus offers a means for avoiding unwanted inertial cavitation and cell death during imaging and other applications such as sonoporation. A review of putative sonoporation mechanisms is then presented, including those involving microbubbles to deliver cargo into a cell, and those - not necessarily involving microubbles - to release cargo from a phospholipid vesicle (or reverse sonoporation). It is shown that the rate of (reverse) sonoporation from liposomes correlates with phospholipid bilayer phase behavior, liquid-disordered phases giving appreciably faster release than liquid-ordered phases. Moreover, liquid-disordered phases exhibit evidence of two release mechanisms, which are described well mathematically by enhanced diffusion (possibly via dilation of membrane phospholipids) and irreversible membrane disruption, whereas liquid-ordered phases are described by a single mechanism, which has yet to be positively identified. The ability to tune release kinetics with bilayer composition makes reverse sonoporation of phospholipid vesicles a promising methodology for controlled drug delivery. Moreover, nesting of microbubbles inside vesicles constitutes a truly “theranostic” vehicle, one that can be used for both long-lasting, safe imaging and for controlled drug delivery.

pH-sensitive vesicles, polymeric micelles, and nanospheres prepared with polycarboxylates

Titratable polyanions, and more particularly polymers bearing carboxylate groups, have been used in recent years to produce a variety of pH-sensitive colloids. These polymers undergo a coil-to-globule conformational change upon a variation in pH of the surrounding environment. This conformational change can be exploited to trigger the release of a drug from a drug delivery system in a pH-dependent fashion. This review describes the current status of pH-sensitive vesicles, polymeric micelles, and nanospheres prepared with polycarboxylates and their performance as nano-scale drug delivery systems, with emphasis on our recent contribution to this field.

"Compression-only" behavior: a second-order nonlinear response of ultrasound contrast agent microbubbles

Oscillating phospholipid-coated ultrasound contrast agent microbubbles display a so-called "compression-only" behavior, where it is observed that the bubbles compress efficiently while their expansion is suppressed. Here, a theoretical understanding of the source of this nonlinear behavior is provided through a weakly nonlinear analysis of the shell buckling model proposed by Marmottant et al. [J. Acoust. Soc. Am. 118, 3499-3505 (2005)]. It is shown that the radial dynamics of the bubble can be considered as a superposition of a linear response at the fundamental driving frequency and a second-order nonlinear low-frequency response that describes the negative offset of the mean bubble radius. The analytical solution deduced from the weakly nonlinear analysis shows that the compression-only behavior results from a rapid change of the shell elasticity with bubble radius. In addition, the radial dynamics of single phospholipid-coated microbubbles was recorded as a function of both the amplitude and the frequency of the driving pressure pulse. The comparison between the experimental data and the theory shows that the magnitude of compression-only behavior is mainly determined by the initial phospholipids concentration on the bubble surface, which slightly varies from bubble to bubble.

Subharmonic behavior of phospholipid-coated ultrasound contrast agent microbubbles

Coated microbubbles, unlike tissue are able to scatter sound subharmonically. Therefore, the subharmonic behavior of coated microbubbles can be used to enhance the contrast in ultrasound contrast imaging. Theoretically, a threshold amplitude of the driving pressure can be calculated above which subharmonic oscillations of microbubbles are initiated. Interestingly, earlier experimental studies on coated microbubbles demonstrated that the threshold for these bubbles is much lower than predicted by the traditional linear viscoelastic shell models. This paper presents an experimental study on the subharmonic behavior of differently sized individual phospholipid coated microbubbles. The radial subharmonic response of the microbubbles was recorded with the Brandaris ultra high-speed camera as a function of both the amplitude and the frequency of the driving pulse. Threshold pressures for subharmonic generation as low as 5 kPa were found near a driving frequency equal to twice the resonance frequency of the bubble. An explanation for this low threshold pressure is provided by the shell buckling model proposed by Marmottant et al. [J. Acoust. Soc. Am. 118, 3499-3505 (2005)]. It is shown that the change in the elasticity of the bubble shell as a function of bubble radius as proposed in this model, enhances the subharmonic behavior of the microbubbles.

pH-sensitive immunoliposomes specific to the CD33 cell surface antigen of leukemic cells

A promising avenue in cancer therapy using liposomal formulations is the combination of site-specific delivery with triggered drug release. The use of trigger mechanisms in liposomes could be relevant for drugs susceptible to lysosomal hydrolytic/enzymatic degradation. Here, we propose a polymeric pH-sensitive liposome system that is designed to release its content inside the endosomes through a polymer structural change following receptor-mediated internalization. Specifically, pH-sensitive immunoliposomes (ILs) were obtained by including a terminally alkylated copolymer of N-isopropylacrylamide (NIPAM) in the liposome bilayer and by coupling the anti-CD33 monoclonal antibody to target leukemic cells. In vitro release of encapsulated fluorescent probes and cytosine arabinoside (ara-C) revealed that pH-sensitivity of the vector was retained in the presence of the antibody upon incubation in plasma. Flow cytometry and confocal microscopy analyses demonstrated that the pH-sensitive ILs were efficiently internalized by various CD33+ leukemic cell lines while limited interaction was found for liposomes decorated with an isotype-matched control antibody. Finally, the pH-sensitive ILs-CD33 formulation exhibited the highest cytotoxicity against HL60 cells, confirming the role of the NIPAM copolymer in promoting the escape of intact ara-C in the endosomes. These results suggest that this pH-sensitive liposomal formulation could be beneficial in the treatment of acute myeloid leukemia.

Effect of polymer characteristics on structure of polymer–liposome complexes

In the current study, we examined the effect of polymer characteristics on the structure of complexes formed between poly(methacrylic acid-co-n-alkyl methacrylate) and with phosphatidylcholine/cholesterol liposomes. We varied the polymer concentration in the vesicles, the preparation concentration of lipid and polymer components during preparation, the molecular weight of the polymer chain, the molecular weight of the polymer's hydrophobic side groups and their mole fraction. The vesicle behavior indicated polymer-free bilayers and bilayers complexed with polymer coexisted at low polymer concentrations. As the polymer concentration exceeds a critical level, however, the system became homogeneous, indicating bilayer uniformity of the bilayer. As the polymer content was raised, the vesicle size and fluidity increased, and the transition temperature decreased. We found that the vesicle size mostly affects the membrane fluidity. We also found that the thermal properties (transition temperature and the magnitude of heat capacity of the peak, DeltaCp) are governed by the effects of the polymer on the structure of bilayer. The length of the alkyl chain of the polymer is shown to significantly affect the structure of polymer-liposome complexes, as did the chain molecular weight and mole concentration of hydrophobic group in the polymer.

1,2-Dimyristoyl-sn-glycero-3-phosphoglycerol (DMPG) monolayers: influence of temperature, pH, ionic strength and binding of alkaline earth cations

Ion binding and lipid ionization of the acidic phospholipid 1,2-dimyristoyl-sn-glycero-3-phosphoglycerol (DMPG) in monolayers was studied by measuring the lateral pressure Pi as a function of the molecular area A at the air/water interface at different temperatures. The pH of the subphase (pH 2 and 7) and the ionic strength (NaCl) was varied. In addition, different divalent cations (1mM MgCl2, CaCl2 and SrCl2, pH 7) were added. DMPG is partly protonated on pure water at pH 7. An increase in the NaCl concentration in the subphase leads to film expansion. This effect is caused by an ionization of the headgroup of DMPG, i.e. a shift of the apparent pK. More condensed films are obtained on pure water at pH 2, due to the reduction of electrostatic repulsion by headgroup protonation and the possibility for the formation of a hydrogen bonding network. The divalent cations Mg2+, Ca2+ and Sr2+ interact differently with a DMPG monolayer in pure water at pH 7. In the presence of 1mM CaCl2 a condensation of the DMPG film is induced, whereas an expansion of the monolayer is observed in the presence of Mg2+ and Sr2+. Two counteracting effects are operative: (a) ionization of the headgroup due to electrostatic screening leads to film expansion and (b) binding of the divalent cations to the lipid headgroups leads to condensation. The latter effect is more pronounced in the case of Ca2+, whereas the binding of Mg2+ and Sr2+ to DMPG is weaker. Site-specific cation binding has to be assumed in addition to electrostatic effects.

Study of pH-sensitive copolymer/phospholipid complexes using the langmuir balance technique: effect of anchoring sequence and copolymer molecular weight

The behavior of three copolymers of N-isopropylacrylamide (NIPAM), methacrylic acid (MAA), and hydrophobic moiety was studied at phospholipid monolayer/subphase interfaces. The hydrophobic moieties, N-terminal dioctadecylamine (DODA) and random octadecylacrylate (ODA), were used as anchoring groups. The interactions between a 1,2-distearoyl-sn-glycero-3-phosphatidylcholine (DSPC) monolayer and the copolymers were studied using the Langmuir balance technique. The effect of subphase pH, distribution of anchors along the copolymer chain, and copolymer molecular weight on the nature of the interactions between the copolymer chains and the DSPC monolayer were investigated. A first-order kinetics model was used to analyze the copolymers adsorption at the DSPC monolayer/subphase interface and allowed the interaction area between the copolymer chains and the DSPC monolayer, A(x), to be determined. The interaction area appears to depend on the subphase pH and the copolymer molecular weight. On decreasing pH, the interaction area of high molecular weight copolymers increases significantly; this is consistent with the copolymer chain phase transition from an extended coil to a collapsed globule while pH is lowered. In the latter conformation, strong hydrophobic attractive interactions between the copolymer chains and the hydrophobic part of the DSPC monolayer favor the copolymer intercalation, which could eventually provoke the phospholipidic layer destabilization or rupture.