Fluorescence probing of interior, interfacial, and exterior regions in solution aggregates of poly(ethylene oxide)- poly(propylene oxide)-poly(ethylene oxide) triblock copolymers

Dynamics of small molecules within the F127 PEO-PPO-PEO triblock copolymer gel and sol phases studied at the molecular scale

Triplet excited states of guest molecules with different hydrophobicities were used to probe the association and dissociation dynamics of these guests with F127 micelles in the gel and sol phases. The dynamics probed was on a longer length scale than amenable with fluorescence techniques, but at a shorter length scale than probed in translational diffusion studies. The mobility of the guests at the molecular scale showed that subtle changes in the guest's structure affect the guest's release time from the micelles, where the structural features of the guest are more important than the phase, gel vs. sol, of the system.

Nature of Saccharide-Induced F127 Micellar Dehydration: An Insight with FDAPT (2-Formyl-5-(4'-N,N-dimethylaminophenyl)thiophene), a Multiparametric Fluorescent Probe

FDAPT (2-formyl-5-(4'-N,N-dimethylaminophenyl)thiophene) is an efficient environment-sensitive fluorescent probe, which senses the alteration of its microenvironment with six different fluorescent parameters, namely, emission intensity, wavelength, fluorescence anisotropy, and corresponding three time-dependent parameters fluorescence lifetime, time-resolved emission spectrum, and anisotropy decay. In the present work, the nature of saccharide-induced dehydration of a F127 polymeric micelle is investigated in detail with FDAPT emission. Using a multiparametric fluorescence approach, it is observed that the saccharide molecules not only decrease the critical micellization temperature of the F127 solution but also strongly alter the physical properties inside the micellar structures. The local polarity and fluidity significantly decrease in the saccharide-induced micelle as compared to the normal F127 micelle. The probe solvation dynamics study reveals that the water content in the core as well as corona domain diminishes significantly in the saccharide-induced micelle as compared to the normal micelle. More precisely, dehydration occurs more in the core region than in the corona region. Also, the saccharide-induced dehydration alters the relative size of the core and corona regions. The extent of dehydration varies with different saccharide molecules. It is also found that the dehydration efficiency order is trisaccharide (raffinose) > disaccharide (sucrose) > monosaccharide (glucose and fructose).

Mechanistic Insights into the Growth of Anisotropic Nanostructures Inside Reverse Micelles: A Solvation Perspective

Reverse micelles (RMs) as soft templates have been successfully used in tailoring the structural characteristics (size and morphology) of nanomaterials that in turn have been used in various applications. In this work, we have focused on the local perturbations in the different interior domains of the cetyltrimethylammonium bromide-reverse micelle-based soft template en route to nanorod formation by monitoring the solvation response of coumarin-based solvatochromic probes (C343 and C153). We have observed an appreciable retardation of the solvent coordinate during the initial phases of nanorod growth, which we have attributed to the reorientational motion of the water molecules lodged in the interfacial region. Moreover, these rigid nanostructures leave their imprints on the soft interfacial layer as was observed from the direct correlation in the solvation response of RM-containing nanostructures and respective surfactant aggregates in supernatant solution. Supporting data from time-resolved anisotropy studies further reinforced our conclusions from the solvation experiments. Our study proves that the hydration dynamics can be a promising tool in tracking the heterogeneous growth evolution of nanostructure formation in RMs since solvent reorganization provides insights into the intrinsic, molecular-level features of the micellar assemblies.

Cholic acid dimers as invertible amphiphilic pockets: synthesis, molecular modeling, and inclusion studies

Two dimers of cholic acid were synthesized through simple covalent linkers. The dimers form invertible molecular pockets in media of different polarity; hydrophobic pockets are formed in water and hydrophilic pockets are formed in organic media. Fluorescence studies show that pockets formed by these dimers can serve as invertible hosts for the hydrophobic guest pyrene and the hydrophilic guest coumarin 343. The molecular pocket also enhances dissolution of the weakly soluble cresol red sodium salt in organic media. Molecular modeling was performed to better understand the host–guest complexation process of the invertible amphiphilic pockets. The calculated free energy changes indicate that the two dimers form the most stable complexes with coumarin 343 at a host to guest ratio of 2:2, whereas the host to guest ratio differs in the formation of complexes with pyrene for the two dimers. The dimer with the shorter, less flexible linker seems to form host–guest complexes that are more stable in both water and organic solvents.

Characterization of chlorophyll derivatives in micelles of polymeric surfactants aiming photodynamic applications

The spectrophotometric properties of chlorophylls' derivatives (Chls) formulated in the Pluronics® F-127 and P-123 were evaluated and the results have shown that the Chls were efficiently solubilized in these drug delivery systems as monomers. The relative location of the Chls in the Pluronics® was estimated from the Stokes shift and micropolarity of the micellar environment. Chls with phytyl chain were located in the micellar core, where the micropolarity is similar to ethanol, while phorbides' derivatives (without phytyl chain) were located in the outer shell of the micelle, i.e., more polar environment. In addition, the thermal stability of the micellar formulations was evaluated through electronic absorption, fluorescence emission and resonance light scattering with lowering the temperature. The Chls promote the stability of the micelles at temperatures below the Critical Micellar Temperature (CMT) of these surfactants. For F-127 formulations, the water molecules drive through inside the nano-structure at temperatures below the CMT, which increased the polarity of this microenvironment and directly affected the spectrophotometric properties of the Chls with phytyl chain. The properties of the micellar microenvironment of P-123, with more hydrophobic core due to the small PEO/PPO fraction, were less affected by lowering the temperature than for F-127. These results enable us to better understand the Chls behavior in micellar copolymers and allowed us to design new drug delivery system that maintains the photosensitizer's properties for photodynamic applications.

Study on binding and fluorescence energy transfer efficiency of Rhodamine B with Pluronic F127-gold nanohybrid using optical spectroscopy methods

This work focuses on the binding efficiency and fluorescence resonance energy transfer (FRET) of fluorescent dye Rhodamine B (Rh B) to Pluronic F127-gold nanohybrid. The formation of gold nanoparticles inside Rh B doped Pluronic F127 copolymer have been characterized using dynamic light scattering study, HR-TEM images, UV-visible spectra and fluorescence studies. Fluorescence quenching and the constant fluorescence lifetime of the Rhodamine B present in the cavity of Pluronic F127-gold nanohybrid suggested a strong binding ability (3.5×10³Lmol^-1), static nature of quenching and better energy transfer efficiency of fluorescent dye towards Pluronic F127-gold (Au) nanohybrids.

Contrasting Response of Two Dipolar Fluorescence Probes in a Leucine-Based Organogel and Its Implications

The microenvironments of a leucine-based organogel are probed by monitoring the fluorescence behavior of coumarin 153 (C153) and 4-aminophthalimide (AP). The steady-state data reveals distinctly different locations of the two molecules in the gel. Whereas AP resides close to the hydroxyl moieties of the gelator and engages in hydrogen-bonding interactions, C153 is found in bulk-toluene-like regions. In contrast to C153, AP exhibits excitation-wavelength-dependent emission, indicating that the environments of the hydrogen-bonded AP molecules are not all identical. A two-component fluorescence decay of AP in gel, unlike C153, supports this model. A time-resolved fluorescence anisotropy study of the rotational motion of the molecules also reveals the strong association of only AP with the gelator. That AP influences the critical gelation concentration implies its direct involvement in the gel-formation process. The results highlight the importance of guest-gelator interactions in gels containing guest molecules.

Tuning of electron transfer reactions in pluronic-surfactant supramolecular assemblies

Photoinduced electron transfer (ET) reaction between an anionic acceptor, coumarin-343 (C343), and a neutral donor, N,N-dimethylaniline (DMAN), has been investigated in composite supramolecular assemblies (mixed micelles) comprised of a pluronic copolymer (P123: EO20-PO70-EO20 or F88: EO103-PO39-EO103 where EO: ethylene oxide and PO: propylene oxide) and a cationic surfactant (CTAC: cetyltrimethylammonium chloride), following fluorescence quenching studies. Systematic increase in the quenching rates for the studied donor-acceptor system with the increasing CTAC to pluronic molar ratio in the mixed micelles demonstrates a large modulation in the ET rates. The mixed micellar systems in the present cases are formed through the incorporation of the hydrocarbon chains of CTAC into the poly-PO core of the pluronic micelles whereby the cationic head groups of CTAC are placed at the periphery of the micellar core, protruded into the hydrated poly-EO corona region, leading to the formation of a positively charged layer deep inside these mixed micelles. Thus, the anionic C343 dye, initially dissolved at the micelle-water interface, experiences a gradually increasing electrostatic attraction and is therefore systematically dragged deeper inside the micellar corona, as the CTAC composition is increased in the mixed micellar systems. Consequently, the ET rate of the C343-DMAN pair undergoes a large enhancement in the studied mixed micellar systems with the increasing CTAC to pluronic molar ratio. The present strategy of modulating ET reactions using such composite supramolecular assemblies can find applications in areas where bimolecular ET is an integral reaction step.

How does bile salt penetration affect the self-assembled architecture of pluronic P123 micelles? – light scattering and spectroscopic investigations

The triblock copolymer of the type (PEO)₂₀–(PPO)₇₀–(PEO)₂₀ (P123) forms a mixed supramolecular aggregate with different bile salts, sodium deoxycholate (NaDC) and sodium taurocholate (NaTC), having different hydrophobicity.

Solute dynamics in block-copolymer reverse micelles: do water content and copolymer concentration alter the microenvironment?

Solute dynamics has been explored in reverse micelles formed with the triblock copolymer (EO)13-(PO)30-(EO)13 (L64), where EO and PO represent ethylene oxide and propylene oxide units, respectively, with small amounts of water in p-xylene. To this effect, nonradiative rate constants (knr) and reorientation times (τr) of two carbocyanine derivatives, 3,3'-diethyloxadicarbocyanine iodide (DODCI) and merocyanine 540 (MC 540) have been measured at different mole ratios of water to copolymer (W) and also at three copolymer concentrations. By examining the nonradiative rate constants and the reorientation times of the two solutes, the microenvironment offered by L64/water/p-xylene reverse micellar system has been investigated. It has been observed that there is no variation in the nonradiative rate constants as well as in the reorientation times of both DODCI and MC 540 with an increase in W and [L64]. Since knr represents activated twist motion about the double bonds for these solutes, it is sensitive to the local friction and likewise, τr also provides information about the microenvironment. Thus, the results of this study indicate that DODCI and MC 540 are located in the cores of the L64 reverse micelles that are made up of hydrated ethylene oxide blocks and the hydration levels are not altered despite an increase in the water content and copolymer concentration. In other words, there is no variation in the microenvironment offered by L64/water/p-xylene reverse micellar system upon increasing W and [L64].

Microheterogeneity and microviscosity of F127 micelle: the counter effects of urea and temperature

F127 is the most widely studied triblock copolymer and due to the presence of very long polypropylene oxide (PPO) and polyethylene oxide (PEO) groups, F127 micelle has different microenvironments clearly separated into core, corona, and peripheral regions. Urea has been known to have adverse effects on the micellar properties and causes demicellization and solvation; on the other hand, rise in temperature causes micellization and solvent evacuation from the core and corona regions. In the present study, we have investigated the microheterogeneity of the core, corona, and peripheral regions of the F127 micelle using red edge excitation shift (REES) at different temperatures and urea concentrations and correlated the effect of both on the micellar system. It was found that the temperature counteracts the effect of urea and also that the counteraction is more prominent in the core region with respect to corona, and the peripheral region is least affected. Also, the core and corona regions are very much heterogeneous, while the peripheral region is more of a homogeneous nature. Using time-resolved fluorescence anisotropy, we found that the microviscosity within the micelles vary in the order of core > corona > peripheral region, and urea has a general tendency to reduce the microviscosity, especially for core and corona regions. On the other hand, rise in temperature initially increases and then decreases the microviscosity throughout, and at elevated temperatures the effect of urea is being dominated by the effect of temperature, thereby establishing the counter effects of temperature and urea on the F127 micellar system.

Anisotropic dynamics of guest molecules in aerosol OT lamellar structures

The present work is focused on developing a description of an anisotropic microheterogeneous medium, exploiting the dynamics of a guest molecule. The medium in question is the lamellar structures formed in the aqueous layer of ternary mixtures containing aerosol OT (AOT), water and n-heptane. The guest used in this study is the fluorescent probe, coumarin 153 (C153). The dynamics of this molecule, within the lamellar structure, have been studied using a combination of steady state and time resolved fluorescence, as well as fluorescence correlation spectroscopy (FCS). The fluorophore is strongly solvatochromatic and so, the wavelength of excitation can be tuned so as to selectively excite fluorescent molecules residing in different regions of the microheterogeneous media, even if the spatial separation between these regions is below the diffraction limit. The excitation wavelength in the present experiments is chosen so as to exclusively excite those C153 molecules that reside in the hydrophobic region of the lamellar structures. This triggers two different modes of diffusion, one along and the other perpendicular to the bilayers of the AOT. Thus, the dynamics of the fluorescent probe provide an elegant manifestation of the anisotropy of the host medium.

Application of time-resolved fluorescence for direct and continuous probing of release from polymeric delivery vehicles

Though accurately evaluating the kinetics of release is critical for validating newly designed therapeutic carriers for in vivo applications, few methods yet exist for release measurement in real time and without the need for any sample preparation. Many of the current approaches (e.g. chromatographic methods, absorption spectroscopy, or NMR spectroscopy) rely on isolation of the released material from the loaded vehicles, which require additional sample purification and can lead to loss of accuracy when probing fast kinetics of release. In this study we describe the use of time-resolved fluorescence for in situ monitoring of small molecule release kinetics from biodegradable polymeric drug delivery systems. This method relies on the observation that fluorescent reporters being released from polymeric drug delivery systems possess distinct excited-state lifetime components, reflecting their different environments in the particle suspensions, i.e., confined in the polymer matrices or free in the aqueous environment. These distinct lifetimes enable real-time quantitative mapping of the relative concentrations of dye in each population to obtain precise and accurate temporal information on the release profile of particular carrier/payload combinations. We found that fluorescence lifetime better distinguishes subtle differences in release profiles (e.g. differences associated with dye loading) than conventional steady-state fluorescence measurements, which represent the averaged dye behavior over the entire scan. Given the method's applicability to both hydrophobic and hydrophilic cargo, it could be employed to model the release of any drug-carrier combination.

Spectral properties of coumarin derivatives in various environments

The structural and spectral properties of coumarin derivatives in complex environments were investigated within the time-dependent density functional theory (TD DFT). Absorption spectra calculations were obtained at TD PBE0/6-31+G(d,p) level of theory for coumarin47 in the gas-phase and in various polar and non-polar organic solvents. The geometries of coumarins 6, 30, 47 and 522 in the gas phase and in inclusion complexes with the β-cyclodextrin (βCD) were determined by PM3 and DFT (HCTH/6-31G) calculations. Encapsulation of coumarin in βCD and associated changes in electronic structure produced either a red or blue shift in the absorption spectra of coumarins. A proposed cavity model for βCD-coumarin complex in water solution allowed identification of various contributions to the overall shift in the absorption spectra of coumarin upon complex formation in a solvent environment

Overcoming interfacial affinity issues in natural fiber reinforced polylactide biocomposites by surface adsorption of amphiphilic block copolymers

This work demonstrates that the interfacial properties in a natural fiber reinforced polylactide bio-composite can be tailored through surface adsorption of amphiphilic and biodegradable poly (ethylene glycol)-b-poly(l-lactide) (PEG-PLLA) block copolymers. The deposition from solvent solution of PEG-PLLA copolymers onto the fibrous substrate induced distinct mechanisms of molecular organization at the cellulosic interface, which are correlated to the hydrophobic/hydrophilic ratios and the type of solvent used. The findings of the study evidenced that the performance of the corresponding biocomposites with polylactide were effectively enhanced by using these copolymers as interfacial coupling agents. During the fabrication stage, diffusion of the polylactide in the melt induced a change in the environment surrounding block copolymers which became hydrophobic. It is proposed that molecular reorganization of the block copolymers at the interface occurred, which favored the interactions with both the hydrophilic fibers and hydrophobic polylactide matrix. The strong interactions such as intra- and intermolecular hydrogen bonds formed across the fiber-matrix interface can be accounted for the enhancement in properties displayed by the biocomposites. Although the results reported here are confined, this concept is unique as it shows that by tuning the amphiphilicity and the type of building blocks, it is possible to control the surface properties of the substrate by self-assembly and disassembly of the amphiphiles for functional materials.

Local viscosity analysis of triblock copolymer micelle with cyanine dyes as a fluorescent probe

The local viscosity of Pluronic F127 triblock copolymer micelles in water was determined with cyanine dyes as fluorescent probes. These dyes show very weak fluorescence at a low temperature, but show enhanced fluorescence at a temperature higher than the critical micellization temperature (T(cm)). This is because a viscous environment within the micelle suppresses the formation of a nonradiative twisted intramolecular charge transfer (TICT) excited state of the dyes. The good correlation between the fluorescence quantum yields of the dyes and the viscosity and the temperature of the media allows a determination of local viscosity of micelle based on the fluorescence quantum yields. The local viscosity of both core and corona regions of micelles increases at >T(cm) and shows a maximum at a temperature 7-9 °C higher than T(cm), and decreases at higher temperature due to the increased fluidity. The core viscosity is larger than that of the corona, and the corona viscosity increases toward the micelle center. The polymer concentration has different effects on the core and corona viscosity: the corona viscosity increases with a polymer concentration increase at the entire temperature range, whereas the core viscosity increases only at a low temperature. The corona viscosity increase is due to the condensation of a large number of polyethylene oxide (PEO) blocks. In contrast, the dehydration degree of polypropylene oxide (PPO) blocks in the core scarcely changes, and the core has a similar composition regardless of polymer concentration. The larger polymer concentration promotes a micelle formation at lower temperature where the fluidity increase is very weak, resulting in larger core viscosity.

Small-angle neutron scattering study of solubilization of tributyl phosphate in aqueous solutions of L64 Pluronic triblock copolymers

We have studied the solubilization behavior of tributylphosphate (TBP) in aqueous solutions of L64-Pluronics, using light and small angle neutron scattering (SANS). Varying the temperature and the oil content, the system presents a nontrivial phase behavior. In particular, at 308 K, a first solubilization followed by an emulsification failure and a resolubilization is found. We have measured the microstructure by SANS and characterized the microemulsion droplet core size, corona thickness, polydispersity, and interactions. It is shown that at low oil content, the system is made of small swollen micelles. After the phase separation, the resolubilization is carried by larger oil droplets decorated by copolymer. From specific surface measurements at large angles, a surprising change in surfactant conformation is found to accompany this morphological evolution which is also supported by previous results obtained from ¹H NMR experiments. In independent measurements, our structural modeling is confirmed using contrast-variation SANS.