Nontoxic block copolymer nanospheres: design and characterization

Application of biomacromolecule-based passive penetration enhancement technique in superficial tumor therapy: A review

Transdermal drug delivery (TDD) has shown great promise in superficial tumor therapy due to its noninvasive and avoidance of the first-pass effect. Especially, passive penetration enhancement technique (PPET) provides the technical basis for TDD by temporarily altering the skin surface structure without requiring external energy. Biomacromolecules and their derived nanocarriers offer a wide range of options for PPET development, with outstanding biocompatibility and biodegradability. Furthermore, the abundant functional groups on biomacromolecule surfaces can be modified to yield functional materials capable of targeting specific sites and responding to stimuli. This enables precise drug delivery to the tumor site and controlled drug release, with the potential to replace traditional drug delivery methods and make PPET-related personalized medicine a reality. This review focuses on the mechanism of biomacromolecules and nanocarriers with skin, and the impact of nanocarriers' surface properties of nanocarriers on PPET efficiency. The applications of biomacromolecule-based PPET in superficial tumor therapy are also summarized. In addition, the advantages and limitations are discussed, and their future trends are projected based on the existing work of biomacromolecule-based PPET.

Tyrosine-derived polymeric surfactant nanospheres insert cholesterol in cell membranes

HYPOTHESIS

The design of biodegradable tyrosine-derived polymeric surfactants (TyPS) through the use of calculated thermodynamic parameters could lead to phospholipid membrane surface modifiers capable of controlling cellular properties such as viability. Delivery of cholesterol by TyPS nanospheres into membrane phospholipid domains could provide further controlled modulation of membrane physical and biological properties.

EXPERIMENT

Calculated Hansen solubility parameters (∂_T) and hydrophile:lipophile balances (HLB) were applied to design and synthesize a small family of diblock and triblock TyPS with different hydrophobic blocks and PEG hydrophilic blocks. Self-assembled TyPS/cholesterol nanospheres were prepared in aqueous media via co-precipitation. Cholesterol loading and Langmuir film balance surface pressures of phospholipid monolayers were obtained. TyPS and TyPS/cholesterol nanosphere effects on human dermal cell viability were evaluated by cell culture using poly(ethylene glycol) (PEG) and Poloxamer 188 as controls.

FINDINGS

Stable TyPS nanospheres incorporated between 1% and 5% cholesterol. Triblock TyPS formed nanosphere with dimensions significantly smaller than diblock TyPS nanospheres. In accord calculated thermodynamic parameters, cholesterol binding increased with increasing TyPS hydrophobicity. TyPS inserted into phospholipid monolayer films in a manner consistent with their thermodynamic properties and TyPS/cholesterol nanospheres delivered cholesterol into the films. Triblock TyPS/cholesterol nanospheres increased human dermal cell viability, which was indicative of potentially beneficial TyPS effects on cell membrane surface properties.

Tyrosine-Derived Polymers as Potential Biomaterials: Synthesis Strategies, Properties, and Applications

Peptide-based polymers are evolving as promising materials for various biomedical applications. Among peptide-based polymers, polytyrosine (PTyr)-based and l-tyrosine (Tyr)-derived polymers are unique, due to their excellent biocompatibility, degradability, and functional as well as engineering properties. To date, different polymerization techniques (ring-opening polymerization, enzymatic polymerization, condensation polymerization, solution-interfacial polymerization, and electropolymerization) have been used to synthesize various PTyr-based and Tyr-derived polymers. Even though the synthesis starts from Tyr, different synthesis routes yield different polymers (polypeptides, polyarylates, polyurethanes, polycarbonates, polyiminocarbonate, and polyphosphates) with unique functional characteristics, and these polymers have been successfully used for various biomedical applications in the past decades. This Review comprehensively describes the synthesis approaches, classification, and properties of various PTyr-based and Tyr-derived polymers employed in drug delivery, tissue engineering, and biosensing applications.

Nanosphere size control by varying the ratio of poly(ester amide) block copolymer blends

HYPOTHESIS

Blending amphiphilic triblock (A-B-A) and diblock (A-B) copolymers comprised of the same hydrophobic tyrosine-derived oligomeric B-block and hydrophilic poly(ethylene glycol) methyl ether (mPEG) A-block can provide highly tunable self-assembled nanosphere particle sizes suitable for biomedical applications.

EXPERIMENT

Triblock and diblock copolymers were synthesized via carbodiimide chemistry and were characterized by nuclear magnetic resonance (NMR) and gel permeation chromatography (GPC). The amount of free PEG present in the purified copolymers was determined using a standard addition calibration curve and GPC peak deconvolution methods. Nanospheres were prepared by co-precipitation of each copolymer and of copolymer blends over a range of mole ratios. Nanospheres were characterized by dynamic light scattering (DLS), transmission electron microscopy (TEM) and % polymer recovery post-preparation.

FINDING

Precise synthesis control produced triblock and diblock copolymers with narrow molecular weight distributions and minimal residual reactants. Self-assembled nanosphere particle sizes were 33 nm for the triblock and 129 nm for the diblock, and the size of their blends increased continuously as a function of mole ratio within that biomedically relevant range. Addition of unreacted PEG had minimal impact on either triblock or diblock nanosphere particle sizes whereas addition of unreacted oligomeric B-block increased nanosphere sizes.

Local Immunosuppression for Vascularized Composite Allografts: Application of Topical FK506-TyroSpheres in a Nonhuman Primate Model

Transplantation of vascularized composite allografts (VCAs) provides a means of restoring complex anatomical and functional units following burns and other disfigurement otherwise not amenable to conventional autologous reconstructive surgery. While short- to intermediate-term VCA survival is largely dependent on patient compliance with medication, the myriad of side effects resulting from lifelong systemic immunosuppression continue to pose a significant challenge. Topical immunosuppression is therefore a logical and attractive alternative for VCA. Current formulations are limited though, by poor skin penetration but this may be mitigated by conjugation of immunosuppressive drugs to TyroSpheres for enhanced delivery. Therefore, we investigated the topical application of FK506-TyroSpheres (in the form of a gel dressing) in a clinically relevant nonhuman primate VCA model to determine if allograft survival could be prolonged at reduced levels of maintenance systemic immunosuppression. Six Major Histocompatibility Complex (MHC)-mismatched cynomolgus macaques (Macaca fascicularis) served as reciprocal donors and recipients of radial forearm fasciocutaneous flaps. Standard Bacitracin ointment and FK506-TyroSpheres were applied every other day to the VCAs of animals in groups 1 (controls, n = 2) and 2 (experimental, n = 4), respectively, before gradual taper of systemic FK506. Clinical features of VCA rejection still developed when systemic FK506 fell below 10 ng/ml despite application of FK506-TyroSpheres and prolonged VCA survival was not achieved. However, unwanted systemic FK506 absorption was avoided with TyroSphere technology. Further refinement to optimize local drug delivery profiles to achieve and maintain therapeutic delivery of FK506 with TyroSpheres is underway, leveraging significant experience in controlled drug delivery to mitigate acute rejection of VCAs.

Disassembly of Nanospheres with a PEG Shell upon Adsorption onto PEGylated Substrates

Polymeric nanospheres have the ability to encapsulate drugs and are therefore widely used in drug delivery applications. Structural transformations that affect drug release from nanospheres are governed by the surrounding environment. To understand these effects, we investigated the adsorption behavior of three types of nanospheres onto model surfaces using quartz crystal microbalance with dissipation (QCM-D) and by atomic force microscopy (AFM). Substrates were prepared from polymers with different degrees of PEGylation (0, 1, and 15%). Nanospheres were prepared via self-assembly of block copolymers. Tyrosine-derived nanospheres are A-B-A triblock copolymers with methoxy poly(ethylene glycol) (PEG) as the A-blocks and an alternating copolymer of desaminotyrosyl-tyrosine octyl ester and suberic acid oligo(DTO-SA) as the B-block. On non-PEGylated substrates, these nanospheres assembled into a close-packed structure; on PEGylated substrates, the adsorbed nanospheres formed a continuous film, thinner than the size of the nanospheres suggesting unraveling of the PEG corona and disassembly of the nanospheres. Also, the adsorption was concentration-dependent, the final thickness being attained at exponentially longer times at lower concentrations. Such substrate- and concentration-dependent behavior was not observed with Pluronic F-127 and PEG-poly(caprolactone) (PCL) nanospheres. Since the essential difference among the three nanospheres is the composition of the core, we conclude that the core influences the adsorption characteristics of the nanospheres as a consequence of their disassembly upon adsorption. These results are expected to be useful in designing nanospheres for their efficient transport across vascular barriers and for delivering drugs to their targets.

Nanospheres with a smectic hydrophobic core and an amorphous PEG hydrophilic shell: structural changes and implications for drug delivery

The structure of nanospheres with a crystalline core and an amorphous diffuse shell was investigated by small-angle neutron scattering (SANS), small-, medium-, and wide-angle X-ray scattering (SAXS, MAXS and WAXS), and differential scanning calorimetry (DSC). Nanospheres, 28 to 35 nm in diameter, were prepared from a triblock copolymer with poly(ethylene glycol) (PEG) hydrophilic end-blocks and oligomers of alternating desaminotyrosyl-tyrosine octyl ester (DTO) and suberic acid (SA) as the central hydrophobic block. In the lyophilized nanospheres, the diffraction patterns show that the PEG shell is ∼10 nm in thickness and crystalline, and the hydrophobic core is ∼10 nm in diameter with a smectic liquid crystalline texture. In aqueous dispersions, the hydrated PEG forms an amorphous shell, but the crystalline phase in the core persists at concentrations down to 1 mg ml-1 as evidenced by the sharp MAXS diffraction peak at a d-spacing of 24.4 Å and a melting endotherm at 40 °C. As the dispersion is diluted (<1 mg ml-1), the core becomes less ordered, and its diameter decreases by 50% even though the overall size of the nanosphere remains essentially unchanged. It is likely that below a critical concentration, intermixing of hydrophobic segments with the PEG segments reduces the size and the crystallinity of the core. At these concentrations, the PEG corona forms a eutectic with water. The mechanisms by which the concentration of the dispersion influences the structure of the nanospheres, and consequently their drug-release characteristics, are discussed.

Polymeric nanospheres for topical delivery of vitamin D3

This study investigates the potential application of polymeric nanospheres (known as TyroSpheres) as a formulation carrier for topical delivery of cholecalciferol (i.e., Vitamin D3, VD3) with the goal to improve the skin delivery and stability of VD3. High drug loading and binding efficiencies were obtained for VD3 when loaded in TyroSpheres. VD3 was released from TyroSpheres in a sustained manner and was delivered across the stratum corneum, which occurred independent of the initial drug loading. An ex vivo skin distribution study showed that TyroSphere formulations delivered 3-10μg of active into the epidermis which was significantly higher than that delivered from Transcutol^® (the control vehicle). In addition, an in vitro cytotoxicity assay using keratinocytes confirmed that VD3 encapsulation in the nanoparticles did not alter the drug activity. Photodegradation of VD3 followed zero-order kinetics. TyroSpheres were able to protect the active against hydrolysis and photodegradation, significantly enhancing the stability of VD3 in the topical formulation.

Nanoparticles and nanofibers for topical drug delivery

This review provides the first comprehensive overview of the use of both nanoparticles and nanofibers for topical drug delivery. Researchers have explored the use of nanotechnology, specifically nanoparticles and nanofibers, as drug delivery systems for topical and transdermal applications. This approach employs increased drug concentration in the carrier, in order to increase drug flux into and through the skin. Both nanoparticles and nanofibers can be used to deliver hydrophobic and hydrophilic drugs and are capable of controlled release for a prolonged period of time. The examples presented provide significant evidence that this area of research has - and will continue to have - a profound impact on both clinical outcomes and the development of new products.

Self-Assembly and Critical Aggregation Concentration Measurements of ABA Triblock Copolymers with Varying B Block Types: Model Development, Prediction, and Validation

The dissipative particle dynamics (DPD) simulation technique is a coarse-grained (CG) molecular dynamics-based approach that can effectively capture the hydrodynamics of complex systems while retaining essential information about the structural properties of the molecular species. An advantageous feature of DPD is that it utilizes soft repulsive interactions between the beads, which are CG representation of groups of atoms or molecules. In this study, we used the DPD simulation technique to study the aggregation characteristics of ABA triblock copolymers in aqueous medium. Pluronic polymers (PEG-PPO-PEG) were modeled as two segments of hydrophilic beads and one segment of hydrophobic beads. Tyrosine-derived PEG5K-b-oligo(desaminotyrosyl tyrosine octyl ester-suberate)-b-PEG5K (PEG5K-oligo(DTO-SA)-PEG5K) block copolymers possess alternate rigid and flexible components along the hydrophobic oligo(DTO-SA) chain, and were modeled as two segments of hydrophilic beads and one segment of hydrophobic, alternate soft and hard beads. The formation, structure, and morphology of the initial aggregation of the polymer molecules in aqueous medium were investigated by following the aggregation dynamics. The dimensions of the aggregates predicted by the computational approach were in good agreement with corresponding results from experiments, for the Pluronic and PEG5K-oligo(DTO-SA)-PEG5K block copolymers. In addition, DPD simulations were utilized to determine the critical aggregation concentration (CAC), which was compared with corresponding results from an experimental approach. For Pluronic polymers F68, F88, F108, and F127, the computational results agreed well with experimental measurements of the CAC measurements. For PEG5K-b-oligo(DTO-SA)-b-PEG5K block polymers, the complexity in polymer structure made it difficult to directly determine their CAC values via the CG scheme. Therefore, we determined CAC values of a series of triblock copolymers with 3-8 DTO-SA units using DPD simulations, and used these results to predict the CAC values of triblock copolymers with higher molecular weights by extrapolation. In parallel, a PEG5K-b-oligo(DTO-SA)-b-PEG5K block copolymer was synthesized, and the CAC value was determined experimentally using the pyrene method. The experimental CAC value agreed well with the CAC value predicted by simulation. These results validate our CG models, and demonstrate an avenue to simulate and predict aggregation characteristics of ABA amphiphilic triblock copolymers with complex structures.

Formulation Strategy for the Delivery of Cyclosporine A: Comparison of Two Polymeric Nanospheres

A wide range of nanoparticles has been explored for the delivery of highly hydrophobic drugs, but very few publications provide comparative data of the performance of different nanoparticles. To address this need, this publication compares poly(lactic-co-glycolic acid) (PLGA) nanoparticles and nanospheres made from tyrosine-derived tri-block copolymers (termed TyroSpheres) for their respective performance as carriers for cyclosporine A (CSA). Using previously reported data on PLGA, we followed similar experimental protocols to evaluate the in vitro characteristics of TyroSpheres. Although there are some similarities between the two particle systems for the delivery of CSA, such as effective encapsulation and epidermal skin penetration, several differences were notable. First, the methods of preparation were different, i.e., self-assembly and emulsion-diffusion-evaporation process for TyroSpheres and PLGA, respectively. Second, TyroSpheres provided 7-day diffusion-controlled release, whereas PLGA nanoparticles provided >21-day erosion-controlled release. Third, the size of TyroSpheres was measured to be ~60–70 nm irrespective of drug loading, whereas the size of PLGA nanoparticles (~100–250 nm) was dependent on drug loading and the method of preparation. Overall, this publication provides a direct comparison between two different types of nanoparticles and illuminates the respective advantages and disadvantages, using CSA as a model for the release of highly hydrophobic drugs.

Paclitaxel in tyrosine-derived nanospheres as a potential anti-cancer agent: in vivo evaluation of toxicity and efficacy in comparison with paclitaxel in Cremophor

Paclitaxel (PTX) has gained widespread clinical use yet its administration is associated with significant toxicity. In the present study, the toxicity and anti-tumor efficacy of tyrosine-derived nanospheres (NSP) for the delivery of PTX was compared to a clinical formulation of PTX in PBS-diluted Cremophor® EL (PTX-CrEL-D). Maximum tolerated dose was determined using a concentration series of PTX in NSP and CrEL-D, with toxicity assessed by measuring changes in body weight. Healthy mice administered PTX-NSP continued to gain weight normally while treatment with PTX-CrEL-D resulted in significant weight loss that failed to recover following treatment. Even at the dose of 50mg/kg, PTX-NSP showed better tolerance than 25mg/kg of PTX-CrEL-D. Xenograft studies of breast cancer revealed that the anti-tumor efficacy of PTX-NSP was equal to that of PTX-CrEL-D in tumors originating from both MDA-MB-435 and ZR-75-1 cancer lines. Larger volume of distribution and longer half-life were measured for PTX-NSP administration compared to those reported in the literature for a CrEL formulation. This trend suggests the potential for improved therapeutic index of PTX when administered via NSP. The findings reported here confirm that the NSP formulation is an efficient method for PTX administration with significant increase in maximum tolerated dose, offering possible clinical implications in the treatment of breast tumors.

A Molecular Dynamic Analysis of Gelatin as an Amorphous Material: Prediction of Mechanical Properties of Gelatin Systems

Biomaterials are used in regenerative medicine for induced autoregeneration and tissue engineering. This is often challenging, however, due to difficulties in tailoring and controlling the respective material properties. Since functionalization is expected to offer better control, in this study gelatin chains were modified with physically interacting groups based on tyrosine with the aim of causing the formation of physical crosslinks. This method permits application-specific properties like swelling and better tailoring of mechanical properties. The design of the crosslink strategy was supported by molecular dynamic (MD) simulations of amorphous bulk models for gelatin and functionalized gelatins at different water contents (0.8 and 25 wt.-%). The results permitted predictions to be formulated about the expected crosslink density and its influence on equilibrium swelling behavior and on elastic material properties. The models of pure gelatin were used to validate the strategy by comparison between simulated and experimental data such as density, backbone conformation angle distribution, and X-ray scattering spectra. A key result of the simulations was the prediction that increasing the number of aromatic functions attached to the gelatin chain leads to an increase in the number of physical netpoints observed in the simulated bulk packing models. By comparison with the Flory-Rehner model, this suggested reduced equilibrium swelling of the functionalized materials in water, a prediction that was subsequently confirmed by our experimental work. The reduction and control of the equilibrium degree of swelling in water is a key criterion for the applicability of functionalized gelatins when used, for example, as matrices for induced autoregeneration of tissues.

Tyrosine-derived nanospheres for enhanced topical skin penetration

The objective of this study was to investigate the passive skin penetration of lipophilic model agents encapsulated within tyrosine-derived nanospheres. The nanospheres were formed by the self-assembly of a biodegradable, non-cytotoxic ABA triblock copolymer. The A-blocks were poly(ethylene glycol) and the hydrophobic B-blocks were oligomers of suberic acid and desaminotyrosyl-tyrosine alkyl esters. These nanospheres had an average hydrodynamic diameter of about 50nm and formed strong complexes with fluorescent dyes, 5-dodecanoylaminofluorescein (DAF, LogD=7.54) and Nile Red (NR, LogD=3.10). These dyes have been used here as models for lipophilic drugs. The distribution of topically applied nanosphere-dye formulations was studied in human cadaver skin using cryosectioning and fluorescence microscopy. Permeation analysis (quantified fluorescence) over a 24h period revealed that the nanospheres delivered nine times more NR to the lower dermis than a control formulation using propylene glycol. For DAF, the nanosphere formulation was 2.5 times more effective than the propylene glycol based control formulation. We conclude that tyrosine-derived nanospheres facilitate the transport of lipophilic substances to deeper layers of the skin, and hence may be useful in topical delivery applications.

Effect of Tyrosine-Derived Triblock Copolymer Compositions on Nanosphere Self-Assembly and Drug Delivery

We have obtained structure-activity relations for nanosphere drug delivery as a function of the chemical properties of a tunable family of self-assembling triblock copolymers. These block copolymers are synthesized with hydrophobic oligomers of a desaminotyrosyl tyrosine ester and diacid and hydrophilic poly(ethylene glycol). We have calculated the thermodynamic interaction parameters for the copolymers with anti-tumor drugs to provide an understanding of the drug binding by the nanospheres. We find that there is an optimum ester chain length, C8, for nanospheres in terms of their drug loading capacities. The nanospheres release the drugs under dialysis conditions, with release rates strongly influenced by solution pH. The nanospheres, which are themselves non-cytotoxic, deliver the hydrophobic drugs very effectively to tumor cells as measured by cell killing activity in vitro and thus offer the potential for effective parentarel in vivo delivery of many hydrophobic therapeutic agents.

Biomimetic membranes designed from amphiphilic block copolymers

A review dedicated to block copolymer self assembly. We discuss general progress in physicochemical interpretations and provide insight to recent developments in (hybrid) materials.

Shell click-crosslinked (SCC) nanoparticles: a new methodology for synthesis and orthogonal functionalization

A new methodology for the preparation of well-defined core-shell nanoparticles was developed, based upon the employment of a multifunctional crosslinker to coincidently stabilize supramolecular polymer assemblies and imbed into the shell unique chemical functionalities. Amphiphilic diblock copolymers of poly(acrylic acid)(80)-b-poly(styrene)(90) that had been assembled into micelles and partially functionalized throughout the corona with alkynyl groups were utilized as Click-readied nanoscaffolds for the formation of shell Click-crosslinked nanoparticles (SCCs). Divergently grown dendrimers of the zero, first, second, and third generations having increasing numbers of azide terminating groups ((N(3))(2)-[G-0], (N(3))(4)-[G-1], (N(3))(8)-[G-2], and (N(3))(16)-[G-3], respectively) were investigated as crosslinkers via Click reactions with the alkynyl groups to form covalent linkages throughout the block copolymer micelle corona, thus forming a crosslinked shell. The crosslinking reactions were characterized by (1)H NMR and IR spectroscopies, differential scanning calorimetry (DSC), and dynamic light scattering (DLS) measurements. Only the first generation dendrimer ((N(3))(4)-[G-1]) possessed a sufficient balance of polyvalency and water solubility to achieve crosslinking and establish a robust nanostructure. The resulting SCC was further characterized with atomic force microscopy (AFM), transmission electron microscopy (TEM), and analytical ultracentrifugation (AU). The dendritic crosslinker is important as it also allows for the incorporation of excess functionality that can undergo complementary reactions. Within the shell of this SCC the remaining azide termini of the dendrimer crosslinker were then consumed in a secondary Click reaction with an alkynyl-functionalized fluorescein to yield a fluorescently labeled SCC that was characterized with DLS, AFM, TEM, AU, UV-vis, and fluorescent measurements as a function of pH.

Hydrophobic drug delivery by self-assembling triblock copolymer-derived nanospheres

We describe the synthesis and characterization of a family of biocompatible ABA-triblock copolymers that comprised of hydrophilic A-blocks of poly(ethylene glycol) and hydrophobic B-blocks of oligomers of suberic acid and desaminotyrosyl-tyrosine esters. The triblock copolymers spontaneously self-assemble in aqueous solution into nanospheres, with hydrodynamic diameters between 40 and 70 nm, that do not dissociate under chromatographic and ultracentrifugation conditions. These nanospheres form strong complexes with hydrophobic molecules, including the fluorescent dye 5-dodecanoylaminofluorescein (DAF) and the antitumor drug, paclitaxel, but not with hydrophilic molecules such as fluorescein and Oregon Green. The nanosphere-paclitaxel complexes retain in vitro the high antiproliferative activity of paclitaxel, demonstrating that these nanospheres may be useful for delivery of the hydrophobic drugs.