Surface-enhanced Raman spectroscopy using gold-core platinum-shell nanoparticle film electrodes: toward a versatile vibrational strategy for electrochemical interfaces

In situ Raman reveals the critical role of Pd in electrocatalytic CO2 reduction to CH4 on Cu-based catalysts

Electrocatalytic CO2 reduction reaction (CO2RR) for CH4 production presents a promising strategy to address carbon neutrality, and the incorporation of a second metal has been proven effective in enhancing catalyst performance. Nevertheless, there remains limited comprehension regarding the fundamental factors responsible for the improved performance. Herein, the critical role of Pd in electrocatalytic CO2 reduction to CH4 on Cu-based catalysts has been revealed at a molecular level using in situ surface-enhanced Raman spectroscopy (SERS). A "borrowing" SERS strategy has been developed by depositing Cu-Pd overlayers on plasmonic Au nanoparticles to achieve the in situ monitoring of the dynamic change of the intermediate during CO2RR. Electrochemical tests demonstrate that Pd incorporation significantly enhances selectivity toward CH4 production, and the Faradaic efficiency (FE) of CH4 is more than two times higher than that for the catalysts without Pd. The key intermediates, including *CO2-, *CO, and *OH, have been directly identified under CO2RR conditions, and their evolution with the electrochemical environments has been determined. It is found that Pd incorporation promotes the activation of both CO2 and H2O molecules and accelerates the formation of abundant active *CO and hydrogen species, thus enhancing the CH4 selectivity. This work offers fundamental insights into the understanding of the molecular mechanism of CO2RR and opens up possibilities for designing more efficient electrocatalysts.

Multidimensional Electrochemistry Decodes the Operando Mechanism of Hydrogen Oxidation

Being an efficient approach to the utilization of hydrogen energy, the hydrogen oxidation reaction (HOR) is of particular significance in the current carbon-neutrality time. Yet the mechanistic picture of the HOR is still blurred, mostly because the elemental steps of this reaction are rapid and highly entangled, especially when deviating from the thermodynamic equilibrium state. Here we report a strategy for decoding the HOR mechanism under operando conditions. In addition to the wide-potential-range I-V curves obtained using gas diffusion electrodes, we have applied the AC impedance spectroscopy to provide independent and complementary kinetic information. Combining multidimensional data sources has enabled us to fit, in mathematical rigor, the core kinetic parameter set in a 5-D data space. The reaction rate of the three elemental steps (Tafel, Heyrovsky, and Volmer reactions), as a function of the overpotential, can thus be distilled individually. Such an undocumented kinetic picture unravels, in detail, how the HOR is controlled by the elemental steps on polarization. For instance, at low polarization region, the Heyrovsky reaction is relatively slow and can be ignored; but at high polarization region, the Heyrovsky reaction will surpass the Tafel reaction. Additionally, the Volmer reaction has been the fastest within overpotentials of interest. Our findings not only offer a better understanding of the HOR mechanism, but also lay the foundation for the development of improved hydrogen energy utilization systems.

Sixty years of electrochemical optical spectroscopy: a retrospective

Sixty years ago, Reddy, Devanatan, and Bockris performed the first in situ electrochemical ellipsometry experiment, which ushered in a new era in the study of electrochemistry, using optical spectroscopy. After six decades of development, electrochemical optical spectroscopy, particularly electrochemical vibrational spectroscopy, has advanced from a phase of immaturity with few methods and limited applications to a phase of maturity with excellent substrate generality and significantly improved resolutions. Here, we divide the development of electrochemical optical spectroscopy into four phases, focusing on the proof-of-concept of different electrochemical optical spectroscopy studies, the emergence of plasmonic enhancement-based electrochemical optical spectroscopic (in particular vibrational spectroscopic) methods, the realization of electrochemical vibrational spectroscopy on well-defined surfaces, and the efforts to achieve operando spectroelectrochemical applications. Finally, we discuss the future development trend of electrochemical optical spectroscopy, as well as examples of new methodology and research paradigms for operando spectroelectrochemistry.

Recent Advances of Seed-Mediated Growth of Metal Nanoparticles: from Growth to Applications

Unprecedented advances in metal nanoparticle synthesis have paved the way for broad applications in sensing, imaging, catalysis, diagnosis, and therapy by tuning the optical properties, enhancing catalytic performance, and improving chemical and biological properties of metal nanoparticles. The central guiding concept for regulating the size and morphology of metal nanoparticles is identified as the precise manipulation of nucleation and subsequent growth, often known as seed-mediated growth methods. However, since the growth process is sensitive not only to the metal seeds but also to capping agents, metal precursors, growth solution, growth/incubation time, reductants, and other influencing factors, the precise control of metal nanoparticle morphology is multifactorial. Further, multiple reaction parameters are entangled with each other, so it is necessary to clarify the mechanism by which each factor precisely regulates the morphology of metal nanoparticles. In this review, to exploit the generality and extendibility of metal nanoparticle synthesis, the mechanisms of growth influencing factors in seed-mediated growth methods are systematically summarized. Second, a variety of critical properties and applications enabled by grown metal nanoparticles are focused upon. Finally, the current progress and offer insights on the challenges, opportunities, and future directions for the growth and applications of grown metal nanoparticles are reviewed.

Material design, development, and trend for surface-enhanced Raman scattering substrates

Surface-enhanced Raman scattering (SERS) is a powerful and non-invasive spectroscopic technique that can provide rich and specific chemical fingerprint information for various target molecules through effective SERS substrates. In view of the strong dependence of the SERS signals on the properties of the SERS substrates, design, exploration, and construction of novel SERS-active nanomaterials with low cost and excellent performance as the SERS substrates have always been the foundation and the top priority for the development and application of the SERS technology. This review specifically focuses on the extensive progress made in the SERS-active nanomaterials and their enhancement mechanism since the first discovery of SERS on the nanostructured plasmonic metal substrates. The design principles, unique functions, and influencing factors on the SERS signals of different types of SERS-active nanomaterials are highlighted, and insight into their future challenge and development trends is also suggested. It is highly expected that this review could benefit a complete understanding of the research status of the SERS-active nanomaterials and arouse the research enthusiasm for them, leading to further development and wider application of the SERS technology.

Finding a Sensitive Surface-Enhanced Raman Spectroscopic Thermometer at the Nanoscale by Examining the Functional Groups

Temperature variation at the nanoscale is pivotal for the thermodynamics and kinetics of small entities. Surface-enhanced Raman spectroscopy (SERS) is a promising technique for monitoring temperature variations at the nanoscale. A key but ambiguous topic is methods to design a sensitive SERS thermometer. Here, we elucidate that the type of chemical bond of molecular probes and the surface chemical bonding effect are crucial for maximizing the sensitivity of the SERS thermometer, as illustrated by the variable-temperature SERS measurements and quantum chemistry calculations for the frequency-temperature functions of a series of molecules. The sensitivity of the frequency-temperature function follows the sequence of triple bond > double bond > single bond, which is available for both aliphatic and aromatic molecules. The surface chemical bonding effect between the SERS substrate and molecular probe substantially increases the sensitivity of the frequency-temperature function. These results provide universally available guidelines for the rational design of a sensitive SERS thermometer by examining the functional groups of molecular probes.

In situ surface enhanced Raman spectroscopy study of electrode-polyelectrolyte interfaces

As polyelectrolytes play a more and more important role in electrochemical fields, further understanding of the electrode-polyelectrolyte interface is in high demand. Surface-enhanced Raman spectroscopy (SERS) is utilized widely in electrode-solution interface research due to its ultra-high sensitivity, but is still rarely in the study of the electrode-polyelectrolyte interface due to difficulties in constructing appropriate electrochemical in situ devices. Additionally, the reported electrochemical in situ Raman works on the electrode-polyelectrolyte interface have a common problem of the coexistence of electrode-solution interfaces and electrode-polyelectrolyte interfaces. Here, we used screen printing electrodes (SPE) with a compact planar three-electrode structure to carry out a new electrochemical in situ SERS test method, which was suitable for the study of the electrode-polyelectrolyte interface. Polyelectrolyte membranes can be conveniently and closely coated on the SPE's planar three electrodes to achieve isolated electrode-polyelectrolyte interfaces without electrode-solution interfaces coexisting. Strongly potential-dependent signals were obtained from the Pt-Nafion™ interface directly across the Nafion™ membrane, which verifies that this method is practical for the electrochemical in situ SERS study of the electrode-polyelectrolyte interface.

Plasmonic Core-Shell Nanomaterials and their Applications in Spectroscopies

Plasmonic core-shell nanostructures have attracted considerable attention in the scientific community recently due to their highly tunable optical properties. Plasmon-enhanced spectroscopies are one of the main applications of plasmonic nanomaterials. When excited by an incident laser of suitable wavelength, strong and highly localized electromagnetic (EM) fields are generated around plasmonic nanomaterials, which can significantly boost excitation and/or radiation processes that amplify Raman, fluorescence, or nonlinear signals and improve spectroscopic sensitivity. Herein, recent developments in plasmon-enhanced spectroscopies utilizing core-shell nanostructures are reviewed, including shell-isolated nanoparticle-enhanced Raman spectroscopy (SHINERS), plasmon-enhanced fluorescence spectroscopy, and plasmon-enhanced nonlinear spectroscopy.

Bimetallic Ag-Cu Alloy Microflowers as SERS Substrates with Single-Molecule Detection Limit

Bimetallic Ag-Cu alloy microflowers with tunable surface compositions were fabricated as surface-enhanced Raman spectroscopy (SERS) substrates with a limit of detection in the zeptomolar range for the analyte molecule rhodamine 6G (R6G). The substrates were prepared on a glass coverslip through a bottom-up strategy by simple thermolysis of metal-alkyl ammonium halide precursors. The reaction temperature and composition of the alloy were varied sequentially to find out the maximum SERS efficiency from the substrates. While UV-vis spectroscopy was employed to characterize the optical properties of the substrates, the bulk and surface compositions of the microflowers were determined using energy-dispersive X-ray fluorescence (ED-XRF) and X-ray photoelectron spectroscopy (XPS) techniques, respectively. Also, the structural and morphological characterizations of the substrates were performed by X-ray diffraction and scanning electron microscope (SEM), respectively. For alloys, the ED-XRF studies confirmed that the bulk compositions matched with the feed ratio, while the surface compositions were found to be rich in copper in the form of both elementary copper and copper oxide, as revealed by XPS studies. From the efficiency studies for different compositions prepared, it was found that 10% Ag-Cu alloy microflowers produced the maximum SERS intensity for resonant R6G molecules as probes. In fact, R6G evidences a 50-fold enhancement in SERS spectra with 10% alloy microflowers as against pure Ag microflowers. Using 1, 2, 3-benzotriazole as a nonresonant Raman probe, uniform enhancement factors on the order of ≈10⁸ were achieved from different parts of the 10% Ag-Cu alloy microflower. The same substrate showed excellent Raman response for detecting R6G at very low concentrations such as 10 zM, leading to detection and analysis of SERS spectra from a single R6G molecule.

In Situ Surface-Enhanced Raman Spectroscopy Characterization of Electrocatalysis with Different Nanostructures

As energy demands increase, electrocatalysis serves as a vital tool in energy conversion. Elucidating electrocatalytic mechanisms using in situ spectroscopic characterization techniques can provide experimental guidance for preparing high-efficiency electrocatalysts. Surface-enhanced Raman spectroscopy (SERS) can provide rich spectral information for ultratrace surface species and is extremely well suited to studying their activity. To improve the material and morphological universalities, researchers have employed different kinds of nanostructures that have played important roles in the development of SERS technologies. Different strategies, such as so-called borrowing enhancement from shell-isolated modes and shell-isolated nanoparticle-enhanced Raman spectroscopy (SHINERS)-satellite structures, have been proposed to obtain highly effective Raman enhancement, and these methods make it possible to apply SERS to various electrocatalytic systems. Here, we discuss the development of SERS technology, focusing on its applications in different electrocatalytic reactions (such as oxygen reduction reactions) and at different nanostructure surfaces, and give a brief outlook on its development.

Surface-enhanced Raman spectroscopic investigation on adsorption kinetic of carbon monoxide at the solid-gas interface

A molecular-level understanding of CO adsorption behavior would be greatly beneficial to resolving the problem of CO poisoning in fuel cells and medical science. Herein, an efficient borrowing strategy based on surface enhanced Raman scattering (SERS) has been developed to investigate the adsorption behavior of CO at the gas-solid interface. A composite SERS substrate with high uniformity was fabricated by electrochemical deposition of optimal Pt over-layers onto an Au nanoparticle film. The results indicated that the linearly bonded mode follows the Langmuir adsorption curve (type I), while the multiply bonded did not. It took a longer time for the C-O_M vibration to reach the adsorption equilibrium than that of C-O_L. The variation tendency toward the Pt-CO_L frequency was in opposition to that of C-O_L, caused by the chemical and dipole-dipole coupling effects. The increase in dynamic coupling effects of the CO molecules caused a blue shift in ν_CO and a red shift of the Pt-CO band, while its shielding effect on SERS intensity cannot be ignored. Additionally, higher pressure is more conducive for linear adsorption to achieve saturation. Density functional theory calculations were employed to explore the adsorption mechanisms. It should also be noted that the substrate with good recycling performance greatly expands its practical application value. The present study suggested that the SERS-based borrowing strategy shows sufficient even valuable capacity to investigate gas adsorption kinetics behavior.

Recent progress in controlling the synthesis and assembly of nanostructures: Application for electrochemical determination of p-nitroaniline in water

The development of nanoparticle research has grown considerably in recent years. One of the reasons for the considerable current interest in nanoparticles is because such materials frequently display unusual physical (structural, electronic, magnetic, and optical) and chemical (catalytic) properties. The development of nanomaterials is of interest to the scientific community and industrial companies. Different methods (physical, chemical, and biological) allow their manufacture. In particular, a major effort has been devoted to the development and improvement of synthesis methods in order to obtain nano-objects of controlled size and shape, a necessary pre-requisite to their organization, and to the study of their intrinsic and collective properties. Reviews play an important role in keeping interested parties up to date on the current state of the research in any academic field. This review aims to focus on the development of nanoparticles and stabilization with adsorbed/covalently attached ligands in solution phase since these factors are deeply related to the origins of the particles' stability, the media to which they are exposed, and the involved applications. This study also examines the factors that influence the synthesis of nanoparticles. It aims to provide an overview of existing electrochemical sensors, particularly those that operate with nanomaterial-based electrode modifications for p-nitroaniline (PNA) determination and to propose guidelines for related research and development activities. Emphasis was placed on the procedure for the analysis of PNA in water samples using nanosilver-based electrodes.

Observation of Substituent Effects in the Electrochemical Adsorption and Hydrogenation of Alkynes on Pt{hkl} Using SHINERS

By combining cyclic voltammetry (CV) and shell-isolated nanoparticle-enhanced Raman spectroscopy (SHINERS), the adsorption behavior of two alkynes, propargyl alcohol (PA) and 2-methyl-3-butyn-2-ol (MeByOH), undergoing hydrogenation on Pt basal plane single-crystal electrodes is investigated. It is found that PA and MeByOH give rise to strong surface sensitivities in relation to both hydrogenation activity and molecular fragmentation into adsorbed species such as CO. For PA, irreversible adsorption is strongly favored for Pt{100} and Pt{110} but is weak in the case of Pt{111}. It is suggested that the presence of the primary alcohol substituent is key to this behavior, with the order of surface reactivity being Pt{100} > Pt{110} > Pt{111}. In contrast, for MeByOH, strong irreversible adsorption is observed on all three basal plane Pt surfaces and we propose that this reflects the enhanced activity of the alkyne moiety arising from the inductive effect of the two methyl groups, coupled with the decreased activity of the tertiary alcohol substituent toward fragmentation. Pt{111} also exhibits singular behavior in relation to MeByOH hydrogenation in that a sharp Raman band at 1590 cm^-1 is observed corresponding to the formation of a di-σ/π-bonded surface complex as the alkyne adsorbs. This band frequency is some 20 cm^-1 higher than the analogous broadband observed for PA and MeByOH adsorbed on all other basal plane Pt surfaces and may be viewed as a fingerprint of Pt{111} terraces being present at a catalyst surface undergoing hydrogenation. Insights into the hydrogenation activity of different Pt{hkl} surfaces are obtained using quantitative comparisons between Raman bands at hydrogenation potentials and at 0.4 V vs Pd/H, the beginning of the double-layer potential region, and it is asserted (with support from CV) that Pt{110} is the most active plane for hydrogenation due to the presence of surface defects generated via the lifting of the (1 × 2) to (1 × 1) clean surface reconstruction following flame annealing and hydrogen cooling. Our findings are also consistent with the hypothesis that Pt{111} planes are most likely to provide semihydrogenation selectivity of alkynes to alkenes, as reported previously.

Electrochemical immunosensor based on binary nanoparticles decorated rGO-TEPA as magnetic capture and Au@PtNPs as probe for CEA detection

Using gold and magnetic nanoparticles co-decorated reduced graphene oxide-tetraethylenepentamine (rGO-TEPA/Au-MNPs) as the magnetic platform for capturing the primary antibody (Ab₁), separation and preconcentration of immunocomplex, a novel homogeneous electrochemical immunosensor was successfully developed. The newly prepared magnetic rGO-TEPA/Au-MNPs, compared with MNPs, exhibited better stability and enhanced electrical conductivity attributed to rGO-TEPA, and showed higher biorecognition efficiency due to AuNPs. In addition, Au@PtNPs were prepared and modified with secondary antibody (Ab₂) as an efficient signal probe for signal readout. Using carcinoembryonic antigen (CEA) as a model analyte, the prepared immunosensor demonstrated satisfactory properties like high stability, good repeatability and selectivity, wide linear range (5.0 pg mL^-1~200.0 ng mL^-1) as well as low detection limit (1.42 pg mL^-1). The homogenous electrochemical immunosensor was applied to the detection of CEA in human serum and was found to exhibit good correlation with the reference method. Thus, the proposed rGO-TEPA/Au-MNPs-based homogenous immunoassay platform might open up a new way for biomarker diagnosis. Graphical Abstract.

Efficient Plasmon-Mediated Energy Funneling to the Surface of Au@Pt Core-Shell Nanocrystals

The structure and ultrafast photodynamics of ∼8 nm Au@Pt core-shell nanocrystals with ultrathin (<3 atomic layers) Pt-Au alloy shells are investigated to show that they meet the design principles for efficient bimetallic plasmonic photocatalysis. Photoelectron spectra recorded at two different photon energies are used to determine the radial concentration profile of the Pt-Au shell and the electron density near the Fermi energy, which play a key role in plasmon damping and electronic and thermal conductivity. Transient absorption measurements track the flow of energy from the plasmonic core to the electronic manifold of the Pt shell and back to the lattice of the core in the form of heat. We show that strong coupling to the high density of Pt(d) electrons at the Fermi level leads to accelerated dephasing of the Au plasmon on the femtosecond time scale, electron-electron energy transfer from Au(sp) core electrons to Pt(d) shell electrons on the sub-picosecond time scale, and enhanced thermal resistance on the 50 ps time scale. Electron-electron scattering efficiently funnels hot carriers into the ultrathin catalytically active shell at the nanocrystal surface, making them available to drive chemical reactions before losing energy to the lattice via electron-phonon scattering on the 2 ps time scale. The combination of strong broadband light absorption, enhanced electromagnetic fields at the catalytic metal sites, and efficient delivery of hot carriers to the catalyst surface makes core-shell nanocrystals with plasmonic metal cores and ultrathin catalytic metal shells promising nanostructures for the realization of high-efficiency plasmonic catalysts.

Surface enhanced Raman spectroscopic studies on the adsorption behaviour of nitric oxide on a Ru covered Au nanoparticle film

Nitric oxide (NO) is very interesting because of its effects on air pollution and especially biological systems. The adsorption behavior of NO molecules has fundamental importance with great technical challenges due to complex processes and species identification. Herein, the NO adsorption behavior on a Ru surface has been investigated using well-designed surface enhanced Raman spectroscopy (SERS) substrates. A Au nanoparticle monolayer film on ITO was employed as the electrode and Ru layers were electrochemically deposited. The internal SERS effect from the Au nanoparticles with high sensitivity and the metallic surfaces of Ru with practical application were integrated into a composite Au/Ru substrate. The molecular adsorption and dissociation of NO were observed simultaneously by SERS. A competitive relationship between adsorption and dissociation was observed at higher NO pressure, and the 3-fold and 2-fold bridge and top adsorption configurations appeared on the surface and were associated with different ν_NO vibrational frequencies. The results indicated that 3-fold bridge sites are preferred for dissociation over other structures. The dissociation of NO produced adsorbed atomic nitrogen and oxygen species to form Ru–N and Ru–O bonds, respectively. The dissociation process, especially for linear NO, was site dependent and blocked at higher pressure or coverage. Due to the change in adsorption energy and coverage, a conversion of the adsorption configuration from bridge to top was observed in the initial stage of NO adsorption, and this was followed by a mixture of bridge and top configurations of NO and dissociated species. A two-step dissociation mechanism and the steps of NO adsorption were proposed. The present study suggested that the SERS technique with appropriate attractive metal overlayers provided a significant and possibly even a valuable approach to explore adsorption behavior and kinetics at gas–solid interfaces.

A SERS borrowing strategy with well-designed substrates has been developed to monitor the adsorption and dissociation of NO at Au/Ru surfaces.

Optimization of a hybrid plasmonic configuration: particle on a corrugated film and its SERS application

Hybrid SERS configurations, which combine manufactured metallic chips with nanoparticles, have emerged as powerful and promising SERS substrates because they not only provide cost-effective and high-yield manufacture, but also demonstrate excellent sensitivity and outstanding reproducibility. Herein, a plasmonic hybrid structure, a particle on an Au film over nanoparticles (particle-AuFON) configuration, was studied for SERS application. In a previous study, we constructed a hybrid substrate by grafting Au@Ag core–shell NPs onto the AuFON structure. In this study, the hybrid substrate is designed and simulated to optimize electromagnetic enhancement while also affording exceptional uniformity, repeatability and stability, which are essential factors in SERS applications. This hybrid substrate provides good SERS performance with a detection limit of 1 × 10⁻¹⁰ M, which is 100-fold improvement compared to AuFON substrate or Au@Ag NPs. The excellent signal enhancement originates from the hotspot improvement and densification, as visualized by the FDTD calculations. Additional hotspots were created at the gaps between the Au@Ag NPs and the AuFON, thus improving the density of hotspots. Moreover, the intensity of the hotspots was improved due to EM coupling between the original hotspots and additional hotspots. To validate the feasibility of this hybrid substrate in SERS-based detection, melamine was detected as an example. The detection limit was 10 nM, which was much lower than the maximum limit of melamine in infant formula (1 ppm) legislated by the governments of both the United States and China. A calibration curve was plotted between the SERS intensity and melamine concentration with a correlation coefficient of 0.98. This hybrid SERS substrate shows great potential in SERS-based sensing and imaging, as it provides high sensitivity and outstanding reproducibility with a simple fabrication procedure, facilitating the cost-effective and high-yield manufacture of SERS substrates.

A plasmonic hybrid structure of particles on a Au film over nanoparticles (particle-AuFON) configuration was studied for application in SERS. It showed great potential in SERS-based sensing and it provides outstanding uniformity, repeatability and stability.

Slanted Ag-Al alloy nanorods arrays for highly active and stable surface-enhanced Raman scattering substrates

Aluminum has been established as an earth-abundant and low-cost alternative to gold and silver for plasmonic applications. Particularly, aluminum largely tends to combines with oxygen compared with silver. Here, a simple glancing angle deposition technique is presented to prepare Ag-Al alloy nanorods (NRs) with a small amount of aluminum. The effect of aluminum is to combine oxygen or corroded substances under certain conditions, such as in the air and in etchants. Beside this, owing to the large diffusion coefficient of aluminum in a Si wafer, the aluminum diffuses easily into a Si wafer, so the bonding force between the Ag-Al alloy NRs and Si wafer can be improved accordingly. In this work, 3.5 at% Al alloy NRs are optimal to exhibit high surface-enhanced Raman scattering (SERS) sensitivity, long-time stability as well as strong bonding force with a Si wafer. Ag-Al alloy NRs make a metal-metal alloy a promising material platform to develop pretty sensitive as well as stable SERS substrates.

Platinum for hydrogen sensing: surface and grain boundary scattering antagonistic effects in Pt@Au core-shell nanoparticle assemblies prepared using a Langmuir-Blodgett method

Hydrogen resistive sensors are fabricated through the synthesis of a series of Pt@Au core-shell nanoparticles showing various Pt shell thicknesses. Resulting colloids are assembled as hexagonal close-packed 2D monolayers of various dimension characteristics using a simple Langmuir-Blodgett method. The fabricated sensors show attractive hydrogen sensing performances with reversible responses in extended sensing ranges, a good specificity towards H₂, short response and recovery times… Sensing measurements and data analyses allow the demonstration of the associated sensing mechanisms. The dissociative chemisorption of H₂ and O₂ on the Pt surface through a Langmuir-Hinshelwood mechanism leads to the formation of chemisorbed hydrogen and hydroxyl groups. This surface nature change induces the modification of the scattering of the conduction electrons at both the grain surface and intercontacts, tuned by the extent of hydrogen and hydroxyl group coverages. In assemblies made of particles showing thin Pt shells, the predominance of the surface scattering described by the Fuchs-Sondheimer model accounts for the observed conductive responses as the number of involved grain boundaries is limited. In contrast, in assemblies made of particles with thick Pt shells, the scattering at the grain boundaries described by the Mayadas-Shatzkes model mostly contributes to the observed resistive responses. The sensor behavior is balanced by these two antagonistic effects.

In situ SERS study of surface plasmon resonance enhanced photocatalytic reactions using bifunctional Au@CdS core-shell nanocomposites

Surface plasmon resonance (SPR) has been utilized in many fields, such as surface-enhanced Raman spectroscopy (SERS) and solar energy conversion. Here we developed an Au@CdS core-shell nanostructure, a bifunctional nanoparticle, used as an efficient catalyst for SPR enhanced photocatalytic degradation, and as a substrate for in situ SERS detection of methylene blue (MB) and p-nitrophenol (pNTP). With integration of an Au nanoparticle into a CdS shell, the degradation process was significantly accelerated under 500 nm long-pass (λ > 500 nm) visible light irradiation, which was caused by the injection of hot electrons. Moreover, a highly uniform, monolayer film of Au@CdS nanoparticles (NPs) has been prepared and used as both a SERS substrate and catalyst. The decomposition of MB molecules and nitrogen coupling reaction of pNTP were observed during the 638 nm laser illumination. We demonstrate that a plasmonic core-semiconductor shell nanocomposite can be a promising material for photocatalysis and in situ SERS study.

Core-Shell Nanoparticle-Enhanced Raman Spectroscopy

Core-shell nanoparticles are at the leading edge of the hot research topics and offer a wide range of applications in optics, biomedicine, environmental science, materials, catalysis, energy, and so forth, due to their excellent properties such as versatility, tunability, and stability. They have attracted enormous interest attributed to their dramatically tunable physicochemical features. Plasmonic core-shell nanomaterials are extensively used in surface-enhanced vibrational spectroscopies, in particular, surface-enhanced Raman spectroscopy (SERS), due to the unique localized surface plasmon resonance (LSPR) property. This review provides a comprehensive overview of core-shell nanoparticles in the context of fundamental and application aspects of SERS and discusses numerous classes of core-shell nanoparticles with their unique strategies and functions. Further, herein we also introduce the concept of shell-isolated nanoparticle-enhanced Raman spectroscopy (SHINERS) in detail because it overcomes the long-standing limitations of material and morphology generality encountered in traditional SERS. We then explain the SERS-enhancement mechanism with core-shell nanoparticles, as well as three generations of SERS hotspots for surface analysis of materials. To provide a clear view for readers, we summarize various approaches for the synthesis of core-shell nanoparticles and their applications in SERS, such as electrochemistry, bioanalysis, food safety, environmental safety, cultural heritage, materials, catalysis, and energy storage and conversion. Finally, we exemplify about the future developments in new core-shell nanomaterials with different functionalities for SERS and other surface-enhanced spectroscopies.

Carbon monoxide mediated chemical deposition of Pt or Pd quasi-monolayer on Au surfaces with superior electrocatalysis for ethanol oxidation in alkaline media

CO-mediated chemical deposition of a Pt or Pd quasi-monolayer on Au surfaces with superior electrocatalysis for ethanol oxidation in alkaline media.

Target-induced nanocatalyst deactivation facilitated by core@shell nanostructures for signal-amplified headspace-colorimetric assay of dissolved hydrogen sulfide

Colorimetric assay platforms for dissolved hydrogen sulfide (H2S) have been developed for more than 100 years, but most still suffer from relatively low sensitivity. One promising route out of this predicament relies on the design of efficient signal amplification methods. Herein, we rationally designed an unprecedented H2S-induced deactivation of (gold core)@(ultrathin platinum shell) nanocatalysts (Au@TPt-NCs) as a highly efficient signal amplification method for ultrasensitive headspace-colorimetric assay of dissolved H2S. Upon target introduction, Au@TPt-NCs were deactivated to different degrees dependent on H2S levels, and the degrees could be indicated by using a Au@TPt-NCs-triggered catalytic system as a signal amplifier, thus paving a way for H2S sensing. The combination of experimental studies and density functional theory (DFT) studies revealed that the Au@TPt-NCs with only 2-monolayer equivalents of Pt (θPt = 2) were superior for H2S-induced nanocatalyst deactivation owing to their enhanced peroxidase-like catalytic activity and deactivation efficiency stemmed from the unique synergistic structural/electronic effects between Au nanocores and ultrathin Pt nanoshells. Importantly, our analytical results showed that the designed method was indeed highly sensitive for sensing H2S with a wide linear range of 10-100 nM, a slope of 0.013 in the regression equation, and a low detection limit of 7.5 nM. Also the selectivity, reproducibility, and precision were excellent. Furthermore, the method was validated for the analysis of H2S-spiked real samples, and the recovery in all cases was 91.6-106.7%. With the merits of high sensitivity and selectivity, simplification, low cost, and visual readout with the naked eye, the colorimetric method has the potential to be utilized as an effective detection kit for point-of-care testing.

A platinum shell for ultraslow ligand exchange: unmodified DNA adsorbing more stably on platinum than thiol and dithiol on gold

A gold core and platinum shell nanoparticles allows both DNA adsorption stability and visible plasmonic properties.

Rational design of Au nanorods assemblies for highly sensitive and selective SERS detection of prostate specific antigen

A simple SERS immunosensor based on AuNRs assembly was developed for rapid detection of specific antigen in early diagnostics.

Surface- and Tip-Enhanced Raman Spectroscopy as Operando Probes for Monitoring and Understanding Heterogeneous Catalysis

ABSTRACT

Surface-enhanced Raman spectroscopy (SERS) and tip-enhanced Raman spectroscopy (TERS) were until recently limited in their applicability to the majority of heterogeneous catalytic reactions. Recent developments begin to resolve the conflicting experimental requirements for SERS and TERS on the one hand, and heterogeneous catalysis on the other hand. This article discusses the development and use of SERS and TERS to study heterogeneous catalytic reactions, and the exciting possibilities that may now be within reach thanks to the latest technical developments. This will be illustrated with showcase examples from photo- and electrocatalysis.

GRAPHICAL ABSTRACT

Au@Pt nanoparticle encapsulated target-responsive hydrogel with volumetric bar-chart chip readout for quantitative point-of-care testing

Point-of-care testing (POCT) with the advantages of speed, simplicity, portability, and low cost is critical for the measurement of analytes in a variety of environments where access to laboratory infrastructure is lacking. While qualitative POCTs are widely available, quantitative POCTs present significant challenges. Here we describe a novel method that integrates an Au core/Pt shell nanoparticle (Au@PtNP) encapsulated target-responsive hydrogel with a volumetric bar-chart chip (V-Chip) for quantitative POCT. Upon target introduction, the hydrogel immediately dissolves and releases Au@PtNPs, which can efficiently catalyze the decomposition of H2 O2 to generate a large volume of O2 to move of an ink bar in the V-Chip. The concentration of the target introduced can be visually quantified by reading the traveling distance of the ink bar. This method has the potential to be used for portable and quantitative detection of a wide range of targets without any external instrument.

Bulk synthesis of metal-organic hybrid dimers and their propulsion under electric fields

Metal-organic hybrid particles have great potential in applications such as colloidal assembly, autonomous microrobots, targeted drug delivery, and colloidal emulsifiers. Existing fabrication methods, however, typically suffer from low throughput, high operation cost, and imprecise property control. Here, we report a facile and bulk synthesis platform that makes a wide range of metal-organic colloidal dimers. Both geometric and interfacial anisotropy on the particles can be tuned independently and conveniently, which represents a key advantage of this method. We further investigate the self-propulsion of platinum-polystyrene dimers under perpendicularly applied electric fields. In 1 × 10(-4) M KCl solution, the dimers exhibit both linear and circular motion with the polystyrene lobes facing toward the moving direction, due to the induced-charge electroosmotic flow surrounding the metal-coated lobes. Surprisingly, in deionized water, the same dimers move in an opposite direction, i.e., the metallic lobes face the forward direction. This is because of the impact of another type of electrokinetic flow: the electrohydrodynamic flow arising from the induced charges on the conducting substrate. The competition between the electrohydrodynamic flow along the substrate and the induced-charge electroosmotic flow along the metallic lobe dictates the propulsion direction of hybrid dimers under electric fields. Our synthetic approach will provide potential opportunities to study the combined impacts of the geometric and interfacial anisotropy on the propulsion, assembly, and other applications of anisotropic particles.

Surface enhanced Raman spectroscopic studies on magnetic Fe3O4@AuAg alloy core-shell nanoparticles

A facile approach has been developed to fabricate multifunctional Fe3O4@AuAg alloy core-shell nanoparticles, owning the magnetism of the core and the surface enhanced Raman spectroscopy (SERS) activities of the alloy shell. By changing the amount of HAuCl4 and AgNO3, Fe3O4@AuAg alloy nanoparticles with different component ratios of Au and Ag were successfully prepared. The surface plasmon resonance of the composition was linearly tuned in a wide range by varying the molar fraction of Ag and Au, suggesting the formation of AuAg alloy shell. SERS and magnetic enrichment effects were investigated by using thiophenol (TP) as the probe molecule. The SERS intensity was strongly dependent on the molar ratios of Au and Ag and the excitation line. Enrichment for the molecules with low concentration and on line SERS monitoring experiments were performed through combining the magnetism of the core and the SERS effect of the alloy shell. The results revealed that the magnetic enrichment efficiency was dramatically increased due to the strong magnetism of Fe3O4 core. In addition, the Fe3O4@AuAg nanoparticles were also used in the microfluidic chip to continuously detect different flowing solution in the channel. The detection time and amount of analyte were successfully decreased.

High strain sensitivity controlled by the surface density of platinum nanoparticles

We report a controllable strain gauge factor obtained using a two-dimensional nanoparticle layer formed from platinum nanoparticles. A vacuum technique is used for room temperature nanoparticle deposition that allows control of the electrical resistance of the film, exhibiting semiconducting-like behavior when nanoparticle arrays cover the surface below a threshold value while above it a metallic behavior is prevalent. The highest sensitivity is obtained for intermediate density values of the nanoparticle assemblies, which could be explained using a tunneling and hopping current expression. The device, which exhibits more than one order of magnitude higher strain sensitivity than continuous metallic films, is fabricated at room temperature through standard lithographic processing allowing for miniaturization and easy integration in silicon technology or flexible substrates.