HEPES-stabilized encapsulation of Salmonella typhimurium

Rapid antimicrobial susceptibility profiling using impedance spectroscopy

The present antibiotic susceptibility testing (AST) techniques based on bacterial culture, gene amplification and mass spectrometry are highly time consuming, labour intensive or expensive. Impedance spectroscopy is an emerging tool for rapid bacterial analysis as it is label-free, real-time, affordable and high-throughput. The over-reliance of this technique on complex chip designs and cell enrichment strategies has, however, slowed its foray into clinical AST. We demonstrate a label-free approach in which a low conductivity zwitterionic buffer is used for boosting impedance sensitivity in simple interdigitated electrodes (IDEs) allowing rapid AST in just 20 min without any liquid flow, biofunctionalization or cell enrichment steps. The detection principle relies on measuring changes in solution resistance due to antibiotic-induced bacterial cell death or growth. While the death-based approach is faster (20 min), it's restricted to surface-acting bactericidal antibiotics. The cell growth approach is longer (60-80 min) but more versatile as it applies to all drug types. Results for antibiotic sensitivity analysis and minimum inhibitory concentration (MIC) determination are illustrated for Escherichia coli, Klebsiella pneumoniae and Staphylococcus aureus against a wide class of antibiotics (penicillins, cephalosporins, polymyxins, carbapenems etc.).

Zwitterions for impedance spectroscopy: The new buffers in town

Studying the role of buffers in impedance spectroscopy is a relatively unexplored area. We demonstrate a special class of biologically relevant buffers known as Good's zwitterionic buffers that show improved performance over standard electrolyte buffers (e.g. PBS) currently widely used in impedance spectroscopy measurements of bacterial suspensions. Our theoretical and experimental comparisons of conductivity of classical and zwitterionic buffers at various different concentrations show that ion-ion interaction effects are significantly higher in zwitterionic buffers as compared to classical buffers at the concentrations at which they are used. This and the fact that zwitterions have larger sizes leads to the lowering of their conductivity which significantly improves their impedance sensing ability. We illustrate through an example of heat-induced ionic release in model S. typhi and S. aureus bacteria that having a low conductivity buffer is indeed beneficial for biological impedance measurements. In fact, the best buffer for impedance studies can be chosen solely based on their electrical properties as long as they are also biologically compatible. This gives Good's zwitterionic buffers an edge over conventional media as they satisfy both these criteria.

DEPIS: A combined dielectrophoresis and impedance spectroscopy platform for rapid cell viability and antimicrobial susceptibility analysis

Antimicrobial resistance (AMR) is caused by inappropriate or excessive antibiotic consumption. Early diagnosis of bacterial infections can greatly curb empirical treatment and thus AMR. Current diagnostic procedures are time-consuming as they rely on gene amplification and cell culture techniques that are inherently limited by the doubling rate of the involved species. Further, biochemical methods for species identification and antibiotic susceptibility testing for drug/dose effectiveness take several days and are non-scalable. We report a real-time, label-free approach called DEPIS that combines dielectrophoresis (DEP) for bacterial enrichment and impedance spectroscopy (IS) for cell viability analysis under 60 min. Target bacteria are captured on interdigitated electrodes using DEP (30 min) and their antibiotic-induced stress response is measured using IS (another 30 min). This principle is used to generate minimum bactericidal concentration (MBC) plots by measuring impedance change due to ionic release by dying bacteria in a low conductivity buffer. The results are rapid since they rely on cell death rather than cell growth which is an intrinsically slower process. The results are also highly specific and work across all bactericidal antibiotics studied, irrespective of their cellular target or drug action mechanism. More importantly, preliminary results with clinical isolates show that methicillin-susceptible Staphylococcus aureus (MSSA) can easily be differentiated from methicillin-resistant S. aureus (MRSA) under 1 h. This rapid cell analyses approach can aid in faster diagnosis of bacterial infections and benefit the clinical decision-making process for antibiotic treatment, addressing the critical issue of AMR.

Behavior and Mechanism of Cesium Biosorption from Aqueous Solution by Living Synechococcus PCC7002

Many efforts have focused on the adsorption of metals from contaminated water by microbes. Synechococcus PCC7002, a major marine cyanobacteria, is widely applied to remove metals from the ocean's photic zone. However, its ability to adsorb cesium (Cs) nuclides has received little attention. In this study, the biosorption behavior of Cs(I) from ultrapure distilled water by living Synechococcus PCC7002 was investigated based on kinetic and isotherm studies, and the biosorption mechanism was characterized by Fourier-transform infrared spectroscopy, Raman spectroscopy, scanning electron microscopy, transmission electron microscopy, energy-dispersive X-ray spectrometry, and three-dimensional excitation emission matrix fluorescence spectroscopy. Synechococcus PCC7002 showed extremely high tolerance to Cs ions and its minimal inhibitory concentration was 8.6 g/L. Extracellular polymeric substances (EPS) in Synechococcus PCC7002 played a vital role in this tolerance. The biosorption of Cs by Synechococcus PCC7002 conformed to a Freundlich-type isotherm model and pseudo-second-order kinetics. The binding of Cs(I) was primarily attributed to the extracellular proteins in EPS, with the amino, hydroxyl, and phosphate groups on the cell walls contributing to Cs adsorption. The biosorption of Cs involved two mechanisms: Passive adsorption on the cell surface at low Cs concentrations and active intracellular adsorption at high Cs concentrations. The results demonstrate that the behavior and mechanism of Cs adsorption by Synechococcus PCC7002 differ based on the Cs ions concentration.

Aptamer-assisted novel technologies for detecting bacterial pathogens

Nowadays, all people are at risk of infectious diseases that are mainly caused by bacteria causing infection. There is a permanent demand for an appropriate detection method that is affordable, practical, careful, rapid, sensitive, efficient and economical. Aptamers are single stranded DNA or RNA oligonucleotides, which can be recognized specifically and bind to their target molecules and also, be exploited in diagnostic applications. Recently, aptamer-based systems have offered great potentials in applications for the recognition of several important bacterial pathogens from clinical and food specimens. There are several reports appraising the diagnostic applicability of aptamer-based systems for the detection of pathogens. As for its excellent sensitivity, as well as its rapid and efficient detectability, this technique may be practical to indicate bacterial targets with less sample size and may consume less time than traditional methods These systems offer a promising approach for the sensitive and quick detection of food-borne and clinical agents. This review provides an overview of aptamer-based methods as a novel approach for detecting bacterial pathogens.

Bioprobes Based on Aptamer and Silica Fluorescent Nanoparticles for Bacteria Salmonella typhimurium Detection

In this study, we have developed an efficient method based on single-stranded DNA (ssDNA) aptamers along with silica fluorescence nanoparticles for bacteria Salmonella typhimurium detection. Carboxyl-modified Tris(2,2'-bipyridyl)dichlororuthenium(II) hexahydrate (RuBPY)-doped silica nanoparticles (COOH-FSiNPs) were prepared using reverse microemulsion method, and the streptavidin was conjugated to the surface of the prepared COOH-FSiNPs. The bacteria S. typhimurium was incubated with a specific ssDNA biotin-labeled aptamer, and then the aptamer-bacteria conjugates were treated with the synthetic streptavidin-conjugated silica fluorescence nanoprobes (SA-FSiNPs). The results under fluorescence microscopy show that SA-FSiNPs can be applied effectively for the labeling of bacteria S. typhimurium with great photostable property. To further verify the specificity of SA-FSiNPs out of multiple bacterial conditions, variant concentrations of bacteria mixtures composed of bacteria S. typhimurium, Escherichia coli, and Bacillus subtilis were treated with SA-FSiNPs.In addition, the feasibility of SA-FSiNPs for bacteria S. typhimurium detection in chicken samples was assessed. All the results display that the established aptamer-based nanoprobes exhibit the superiority for bacteria S. typhimurium detection, which is referentially significant for wider application prospects in pathogen detection.

Atomic Force Microscopy and pharmacology: from microbiology to cancerology

BACKGROUND

Atomic Force Microscopy (AFM) has been extensively used to study biological samples. Researchers take advantage of its ability to image living samples to increase our fundamental knowledge (biophysical properties/biochemical behavior) on living cell surface properties, at the nano-scale.

SCOPE OF REVIEW

AFM, in the imaging modes, can probe cells morphological modifications induced by drugs. In the force spectroscopy mode, it is possible to follow the nanomechanical properties of a cell and to probe the mechanical modifications induced by drugs. AFM can be used to map single molecule distribution at the cell surface. We will focus on a collection of results aiming at evaluating the nano-scale effects of drugs, by AFM. Studies on yeast, bacteria and mammal cells will illustrate our discussion. Especially, we will show how AFM can help in getting a better understanding of drug mechanism of action.

MAJOR CONCLUSIONS

This review demonstrates that AFM is a versatile tool, useful in pharmacology. In microbiology, it has been used to study the drugs fighting Candida albicans or Pseudomonas aeruginosa. The major conclusions are a better understanding of the microbes' cell wall and of the drugs mechanism of action. In cancerology, AFM has been used to explore the effects of cytotoxic drugs or as an innovative diagnostic technology. AFM has provided original results on cultured cells, cells extracted from patient and directly on patient biopsies.

GENERAL SIGNIFICANCE

This review enhances the interest of AFM technologies for pharmacology. The applications reviewed range from microbiology to cancerology.

Structure and biosynthesis of two exopolysaccharides produced by Lactobacillus johnsonii FI9785

Exopolysaccharides were isolated and purified from Lactobacillus johnsonii FI9785, which has previously been shown to act as a competitive exclusion agent to control Clostridium perfringens in poultry. Structural analysis by NMR spectroscopy revealed that L. johnsonii FI9785 can produce two types of exopolysaccharide: EPS-1 is a branched dextran with the unusual feature that every backbone residue is substituted with a 2-linked glucose unit, and EPS-2 was shown to have a repeating unit with the following structure: -6)-α-Glcp-(1-3)-β-Glcp-(1-5)-β-Galf-(1-6)-α-Glcp-(1-4)-β-Galp-(1-4)-β-Glcp-(1-. Sites on both polysaccharides were partially occupied by substituent groups: 1-phosphoglycerol and O-acetyl groups in EPS-1 and a single O-acetyl group in EPS-2. Analysis of a deletion mutant (ΔepsE) lacking the putative priming glycosyltransferase gene located within a predicted eps gene cluster revealed that the mutant could produce EPS-1 but not EPS-2, indicating that epsE is essential for the biosynthesis of EPS-2. Atomic force microscopy confirmed the localization of galactose residues on the exterior of wild type cells and their absence in the ΔepsE mutant. EPS2 was found to adopt a random coil structural conformation. Deletion of the entire 14-kb eps cluster resulted in an acapsular mutant phenotype that was not able to produce either EPS-2 or EPS-1. Alterations in the cell surface properties of the EPS-specific mutants were demonstrated by differences in binding of an anti-wild type L. johnsonii antibody. These findings provide insights into the biosynthesis and structures of novel exopolysaccharides produced by L. johnsonii FI9785, which are likely to play an important role in biofilm formation, protection against harsh environment of the gut, and colonization of the host.

Molecular and nanoscale compositional contrast of soft matter in liquid: interplay between elastic and dissipative interactions

We demonstrate that the phase contrast observed with an amplitude modulation atomic force microscope depends on two factors, the generation of higher harmonics components and the energy dissipated on the sample surface. Those factors are ultimately related to the chemical composition and structure of the surface. Our findings are general, but they specifically describe the results obtained while imaging soft materials in liquid. Molecular resolution experiments performed on a protein membrane surface in liquid confirm the theory.

Role of overexpressed CFA/I fimbriae in bacterial swimming

Enterotoxigenic Escherichia coli CFA/I is a protective antigen and has been overexpressed in bacterial vectors, such as Salmonella Typhimurium H683, to generate vaccines. Effects that overexpressed CFA/I may engender on the bacterial host remain largely unexplored. To investigate, we constructed a high CFA/I expression strain, H683-pC2, and compared it to a low CFA/I expression strain, H683-pC, and to a non-CFA/I expression strain, H683-pY. The results showed that H683-pC2 was less able to migrate into semisolid agar (0.35%) than either H683-pC or H683-pY. Bacteria that migrated showed motility halo sizes of H683-pC2 < H683-pC < H683-pY. In the liquid culture media, H683-pC2 cells precipitated to the bottom of the tube, while those of H683-pY did not. In situ imaging revealed that H683-pC2 bacilli tended to auto-agglutinate within the semisolid agar, while H683-pY bacilli did not. When the cfaBE fimbrial fiber encoding genes were deleted from pC2, the new plasmid, pC2(-), significantly recovered bacterial swimming capability. Our study highlights the negative impact of overexpressed CFA/I fimbriae on bacterial swimming motility.

Characterization of bacterial polysaccharide capsules and detection in the presence of deliquescent water by atomic force microscopy

We detected polysaccharide capsules from Zunongwangia profunda SM-A87 with atomic force microscopy (AFM). The molecular organization of the capsules at the single-polysaccharide-chain level was reported. Furthermore, we found that with ScanAsyst mode the polysaccharide capsules could be detected even in the presence of deliquescent water covering the capsule.

Expression of Escherichia coli virulence usher protein attenuates wild-type Salmonella

Generation of a live attenuated vaccine for bacterial pathogens often requires prior knowledge of the pathogen's virulence factors. We hypothesized an alternative approach of heterologous gene expression would make a wild-type (wt) pathogen more susceptible to host cell killing, thus, resulting in immunization. As proof of concept, the heterologous expression of enterotoxigenic E. coli (ETEC) colonization factor antigen I (CFA/I) was tested to attenuate Salmonella. The overexpression of CFA/I resulted in significant attenuation of wt Salmonella. In-depth studies revealed the attenuation depended on the co-expression of chaperone (CfaA) and usher (CfaC) proteins. Remarkably, the CfaAC-attenuated Salmonella conferred protection against wt Salmonella challenge. Mechanistic study indicated CfaAC made Salmonella outer membranes permeable, causing Salmonella to be vulnerable to host destruction. Thus, enhancing bacterial permeability via CfaAC represents an alternative method to attenuate pathogens despite the presence of unknown virulence factors.

Are the soft, liquid-like structures detected around bacteria by ambient dynamic atomic force microscopy capsules?

High-resolution imaging of bacterial capsules by microscopy is of paramount importance in microbiology due to their role in pathogenesis. This is, however, quite a challenging task due to their delicate nature. In this context, recent reports have claimed successful exploitation of the capacity of atomic force microscopy (AFM) for imaging of extremely deformable (even liquid) surfaces under ambient conditions to detect bacterial capsules in the form of tiny amounts of liquid-like substances around bacteria. In order to further explore this supposed capacity of AFM, in this work, three staphylococcal strains have been scrutinized for the presence of capsules using such an AFM-based approach with a phosphate buffer and water as the suspending liquids. Similar results were obtained with the three strains. AFM showed the presence of liquid-like substances identical to those attributed to bacterial capsules in the previous literature. Extensive imaging and chemical analysis point out the central role of the suspending liquid (buffer) in the formation of these substances. The phenomenon has been reproduced even by using nonliving particles, a finding that refutes the biological origin of the liquid-like substances visualized around the cells. Deliquescence of major components of biological buffers, such as K(2)HPO(4), CaCl(2), or HEPES, is proposed as the fundamental mechanism of the formation of these ultrasmall liquid-like structures. Such an origin could explain the high similarity of our results obtained with three very different strains and also the high similarity of these results to others reported in the literature based on other bacteria and suspending liquids. Finally, possible biological/biomedical implications of the presence of these ultrasmall amounts of liquids wrapping microorganisms are discussed.

Geobacillus sp., a thermophilic soil bacterium producing volatile antibiotics

Geobacillus, a bacterial genus, is represented by over 25 species of Gram-positive isolates from various man-made and natural thermophilic areas around the world. An isolate of this genus (M-7) has been acquired from a thermal area near Yellowstone National Park, MT and partially characterized. The cells of this organism are globose (ca. 0.5 mu diameter), and they are covered in a matrix capsule which gives rise to elongate multicelled bacilliform structures (ranging from 3 to 12 mum) as seen by light and atomic force microscopy, respectively. The organism produces unique petal-shaped colonies (undulating margins) on nutrient agar, and it has an optimum pH of 7.0 and an optimum temperature range of 55-65 degrees C. The partial 16S rRNA sequence of this organism has 97% similarity with Geobacillus stearothermophilus, one of its closest relatives genetically. However, uniquely among all members of this genus, Geobacillus sp. (M-7) produces volatile organic substances (VOCs) that possess potent antibiotic activities. Some of the more notable components of the VOCs are benzaldehyde, acetic acid, butanal, 3-methyl-butanoic acid, 2-methyl-butanoic acid, propanoic acid, 2-methyl-, and benzeneacetaldehyde. An exposure of test organisms such as Aspergillus fumigatus, Botrytis cinerea, Verticillium dahliae, and Geotrichum candidum produced total inhibition of growth on a 48-h exposure to Geobacillus sp.(M-7) cells (ca.10(7)) and killing at a 72-h exposure at higher bacterial cell concentrations. A synthetic mixture of those available volatile compounds, at the ratios occurring in Geobacillus sp. (M-7), mimicked the bioactivity of this organism.

Use of atomic force microscopy as a tool to understand the action of antimicrobial peptides on bacteria

Atomic force microscopy (AFM) has been extensively used to image the three-dimensional surface morphology of a broad range of biological samples, including Gram-negative bacteria, imaged in the presence of antimicrobial peptides (AMPs). Although this technique provides high molecular resolution, it only requires minimum sample treatment and can even be performed in liquid and at varying temperatures while keeping the bacterial cells viable. In this chapter, we describe an easy, fast, and yet effective method for preparing AMP-treated Gram-negative bacteria samples for AFM imaging. The results obtained using this method show a series of morphological changes of Gram-negative bacteria upon treatment with selected AMPs, thus providing vivid insights into the mechanisms of how AMPs perturb and destroy Gram-negative bacteria in a stepwise manner. Technical details for performing AFM so as to obtain reliable and high-resolution images will also be discussed, together with some possible artifacts and troubleshooting.

Molecular scale energy dissipation in oligothiophene monolayers measured by dynamic force microscopy

We perform a combined experimental and theoretical approach to establish the atomistic origin of energy dissipation occurring while imaging a molecular surface with an amplitude modulation atomic force microscope. We show that the energy transferred by a single nano-asperity to a sexithiophene monolayer is about 0.15 eV/cycle. The configuration space sampled by the tip depends on whether it approaches or withdraws from the surface. The asymmetry arises because of the presence of energy barriers among different deformations of the molecular geometry. This is the source of the material contrast provided by the phase-shift images.

Antibody selection for immobilizing living bacteria

We report a comparative study of the efficacy of immobilizing living bacteria by means of seven antibodies against bacterial surface antigens associated with Salmonella enterica Serovar Typhimurium. The targeted bacterial antigens were CFA/I fimbriae, flagella, lipopolysaccharides (LPS), and capsular F1 antigen. The best immobilization of S. Typhimurium was achieved with the antibody against CFA/I fimbriae. The immobilization of bacteria using antiflagellin showed significant enhancement if the flagella rotary motion was paralyzed. Of the four antibodies targeting LPS structures, only one, the antibody against the O-antigen polysaccharides, showed a relatively efficient bacterial immobilization. No bacterial immobilization was achieved using the antibody against F1 antigen, presumably because F1 protein can detach from the bacterial surface easily. The results suggest that an antibody for bacterial immunoimmobilization should target a surface antigen which extends out from the bacterial surface and is tightly attached to the bacterial cell wall. The microarrays of living S. Typhimurium cells immobilized in this manner remained viable and effective for at least 2 weeks in growth medium before a thick biofilm covered the whole surface.

Structural and nanomechanical properties of Termitomyces clypeatus cell wall and its interaction with chromium(VI)

Alterations of cell surface properties accompanying the complex life cycle of Termitomyces clypeatus have been monitored using atomic force microscopy (AFM). A new hyphae/mycelium is developed on cell division, and the cell wall of the mycelium undergoes a process of internal reorganization (or maturation) followed by morphological and chemical alterations. The changes of the surface ultrastructures during the growth process are correlated to the corresponding changes in relative viscoelasticity and rigidity of the cell wall by employing force spectroscopy. The cell wall rigidity and elasticity are found to be 0.34+/-0.02 N/m and 27.5+/-2.1 MPa, respectively, at the early logarithmic phase, on maturation increase to reach 0.81+/-0.08 N/m and 92.5+/-12 MPa, respectively, at the stationary phase, and thereafter decrease to 0.62+/-0.06 N/m and 61.6+/-6.6 MPa at the death phase. The alterations of the ultrastructural and nanomechanical properties of the cell surface as functions of growth phases affect the interaction involving chromium and T. clypeatus.

Nanoscale structural and mechanical properties of nontypeable Haemophilus influenzae biofilms

Nontypeable Haemophilus influenzae (NTHI) bacteria are commensals in the human nasopharynx, as well as pathogens associated with a spectrum of acute and chronic infections. Two important factors that influence NTHI pathogenicity are their ability to adhere to human tissue and their ability to form biofilms. Extracellular polymeric substances (EPS) and bacterial appendages such as pili critically influence cell adhesion and intercellular cohesion during biofilm formation. Structural components in the outer cell membrane, such as lipopolysaccharides, also play a fundamental role in infection of the host organism. In spite of their importance, these pathogenic factors are not yet well characterized at the nanoscale. Here, atomic force microscopy (AFM) was used in aqueous environments to visualize structural details, including probable Hif-type pili, of live NTHI bacteria at the early stages of biofilm formation. Using single-molecule AFM-based spectroscopy, the molecular elasticities of lipooligosaccharides present on NTHI cell surfaces were analyzed and compared between two strains (PittEE and PittGG) with very different pathogenicity profiles. Furthermore, the stiffness of single cells of both strains was measured and subsequently their turgor pressure was estimated.

Adsorption behavior of mercury on functionalized aspergillus versicolor mycelia: atomic force microscopic study

The adsorption characteristics of mercury on Aspergillus versicolor mycelia have been studied under varied environments. The mycelia are functionalized by carbon disulfide (CS(2)) treatment under alkaline conditions to examine the enhance uptake capacity and explore its potentiality in pollution control management. The functionalized A. versicolor mycelia have been characterized by scanning electron microscopy-energy dispersive X-ray analysis (SEM-EDXA), attenuated total reflection infrared (ATR-IR), and atomic force microscopy (AFM) probing. SEM and AFM images exhibit the formation of nanoparticles on the mycelial surface. ATR-IR profile confirms the functionalization of the mycelia following chemical treatment. ATR-IR and EDXA results demonstrate the binding of the sulfur groups of the functionalized mycelia to the mercury and consequent formation metal sulfide. AFM study reveals that the mycelial surface is covered by a layer of densely packed domain like structures. Sectional analysis yields significant increase in average roughness (R(rms)) value (20.5 +/- 1.82 nm) compared to that of the pristine mycelia (4.56 +/- 0.82 nm). Surface rigidity (0.88 +/- 0.06 N/m) and elasticity (92.6 +/- 10.2 MPa) obtained from a force distance curve using finite element modeling are found to increase significantly with respect to the corresponding values of (0.65 +/- 0.05 N/m and 32.8 +/- 4.5 MPa) of the nonfunctionalized mycelia. The maximum mercury adsorption capacity of the functionalized mycelia is observed to be 256.5 mg/g in comparison to 80.71 mg/g for the pristine mycelia.

Atomic force microscopy investigation of phage infection of bacteria

Atomic force microscopy (AFM) was used to study the process of infection of bacterial cells by bacteriophages, for which purpose experimental protocols were elaborated. Three types of bacteriophages were characterized with AFM and transmission electron microscopy (TEM). Bacteriophage interaction with cells was studied for three bacterial hosts: Gram-negative Escherichia coli 057 and Salmonella enteritidis 89 and Gram-positive Bacillus thuringiensis 393. Depending on the phase of lytic cycle, different cell surface changes are observed in AFM images of infected cells in comparison with intact cells: from phage adsorption on the cells and flagella to complete lysis of the cells, accompanied by the release of a large number of newly formed phages. Control experiments (cells without phages and cells with nonspecific phages) did not reveal any surface changes. Penetration of phages inside obligate aerobe Bacillus thuringiensis was shown to be oxygen-dependent and required aeration in laboratory conditions. Our results show great potential of using AFM for numerous fundamental and applied tasks connected with pathogen-host interaction.

Interaction of chromium with resistant strain Aspergillus versicolor: investigation with atomic force microscopy and other physical studies

The interaction of chromium and a chromate resistant Aspergillus versicolor strain has been studied by atomic force (AFM) and transmission electron (TEM) microscopies. The nanomechanical properties such as cell wall rigidity and elasticity were measured by force spectroscopy and found to be 0.61 +/- 0.08 N/m, and 20.5 +/- 2.1 MPa, respectively. On chromium binding, ultrastuctural changes of the cell wall along with the formation of layered structures on the cell wall were observed. TEM and AFM micrographs demonstrate the accumulation of chromium on the cell wall, which were rough and irregular compared with the smooth pristine mycelia. The surface roughness, cell wall rigidity and elasticity increased to 35.5 +/- 3.5 nm, 0.88 +/- 0.05 N/m, and 62.5 +/- 3.5 MPa, respectively, from the corresponding values of 5.2 +/- 0.68 nm, 0.61 +/- 0.02 N/m, and 20.5 +/- 2.1 MPa for the pristine mycelia. X-ray photoelectron spectroscopy and Fourier transform infrared studies suggest that bound chromium was reduced to its trivalent state by the cell wall components. The reduced chromium species on the cell surface further electrostatically bind chromate ions forming layered structure on the cell wall.

Use of atomic force microscopy and transmission electron microscopy for correlative studies of bacterial capsules

Bacteria can possess an outermost assembly of polysaccharide molecules, a capsule, which is attached to their cell wall. We have used two complementary, high-resolution microscopy techniques, atomic force microscopy (AFM) and transmission electron microscopy (TEM), to study bacterial capsules of four different gram-negative bacterial strains: Escherichia coli K30, Pseudomonas aeruginosa FRD1, Shewanella oneidensis MR-4, and Geobacter sulfurreducens PCA. TEM analysis of bacterial cells using different preparative techniques (whole-cell mounts, conventional embeddings, and freeze-substitution) revealed capsules for some but not all of the strains. In contrast, the use of AFM allowed the unambiguous identification of the presence of capsules on all strains used in the present study, including those that were shown by TEM to be not encapsulated. In addition, the use of AFM phase imaging allowed the visualization of the bacterial cell within the capsule, with a depth sensitivity that decreased with increasing tapping frequency.

Nanoscale compositional mapping with gentle forces

Microscopists have always pursued the development of an instrument that combines topography and materials properties analyses at the highest resolution. The measurement of the tiny amount of energy dissipated by a vibrating tip in the proximity of the sample surface has provided atomic force microscopes with a robust and versatile method to determine the morphology and the compositional variations of surfaces in their natural environment. Applications in biology, polymer science and microelectronics illustrate the potential of phase-imaging force microscopy for nanoscale analysis.