1
|
Tran E, Carpenter AP, Richmond GL. Probing the Molecular Structure of Coadsorbed Polyethylenimine and Charged Surfactants at the Nanoemulsion Droplet Surface. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2020; 36:9081-9089. [PMID: 32668900 DOI: 10.1021/acs.langmuir.0c01095] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/11/2023]
Abstract
Nanoemulsions, nanoscale oil droplets dispersed in an aqueous medium, can be stabilized by polymer-surfactant (PS) mixtures, making them ubiquitous in commercial, industrial, and pharmaceutical applications. It is well-known that the presence of PS layers coadsorbed at the droplet surface plays a significant role in droplet stability and functionality; however, little is understood about the molecular nature of this coadsorption. Such insights are especially important for application in drug delivery where physiological conditions can vary the environmental pH and significantly impact stabilization. Hence, the focus of this study examines the surface properties of ∼300 nm nanoemulsions stabilized by the coadsorption of polyethylenimine (PEI) and charged alkyl surfactants sodium dodecyl sulfate (SDS) and dodecyltrimethylammonium bromide (DTAB). PEI is a common charge-tunable polymer used in nanocarrier templates. This study employs vibrational sum frequency scattering spectroscopy, coupled with ζ-potential and surface pressure measurements performed as a function of varying concentrations and pH. The surface specific spectroscopic results reported herein reveal that PEI adsorption and molecular ordering is influenced by both electrostatic and hydrophobic interactions. While the degree of PEI adsorption is stronger in the presence of anionic SDS than cationic DTAB, for both surfactants, PEI is molecularly disordered in acidic conditions and adopts a persistent net ordering as the solution pH becomes more basic. Both surfactants also display degrees of interfacial conformational ordering that is altered by the presence of the coadsorbed polymer. These results demonstrate the molecular-level diversity in PEI behavior at the droplet interface and provide insight into how such behavior can be controlled to yield nanocarrier technology with specific functions and enhanced efficacy.
Collapse
Affiliation(s)
- Emma Tran
- Department of Chemistry and Biochemistry, University of Oregon, Eugene, Oregon 97403, United States
| | - Andrew P Carpenter
- Department of Chemistry and Biochemistry, University of Oregon, Eugene, Oregon 97403, United States
| | - Geraldine L Richmond
- Department of Chemistry and Biochemistry, University of Oregon, Eugene, Oregon 97403, United States
| |
Collapse
|
2
|
Li P, Penfold J, Thomas RK, Xu H. Multilayers formed by polyelectrolyte-surfactant and related mixtures at the air-water interface. Adv Colloid Interface Sci 2019; 269:43-86. [PMID: 31029983 DOI: 10.1016/j.cis.2019.04.002] [Citation(s) in RCA: 23] [Impact Index Per Article: 4.6] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/07/2019] [Revised: 04/13/2019] [Accepted: 04/13/2019] [Indexed: 01/01/2023]
Abstract
The structure and occurrence of multilayered adsorption at the air-water interface of surfactants in combination with other oppositely charged species is reviewed. The main species that trigger multilayer formation are multiply charged metal, oligo- and polyions. The structures vary from the attachment of one or two more or less complete surfactant bilayers to the initial surfactant monolayer at the air-water interface to the attachment of a greater number of bilayers with a more defective structure. The majority of the wide range of observations of such structures have been made using neutron reflectometry. The possible mechanisms for the attraction of surfactant bilayers to an air-water interface are discussed and particular attention is given to the question of whether these structures are true equilibrium structures.
Collapse
Affiliation(s)
- Peixun Li
- STFC, Rutherford-Appleton Laboratory, Chilton, Didcot, Oxfordshire, OX11 0RA, United Kingdom
| | - Jeffery Penfold
- STFC, Rutherford-Appleton Laboratory, Chilton, Didcot, Oxfordshire, OX11 0RA, United Kingdom
| | - Robert K Thomas
- Physical and Theoretical Chemistry Laboratory, South Parks Road, Oxford, OX1 3QZ, United Kingdom.
| | - Hui Xu
- KLK OLEO, Room 1603, 16th Floor, LZY Tower, 4711 Jiao Tong Road, Putuo District, Shanghai 200331, China
| |
Collapse
|
3
|
Schulze-Zachau F, Braunschweig B. C nTAB/polystyrene sulfonate mixtures at air-water interfaces: effects of alkyl chain length on surface activity and charging state. Phys Chem Chem Phys 2019; 21:7847-7856. [PMID: 30916092 DOI: 10.1039/c9cp01107b] [Citation(s) in RCA: 11] [Impact Index Per Article: 2.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/17/2022]
Abstract
Binding and phase behavior of oppositely charged polyelectrolytes and surfactants with different chain lengths were studied in aqueous bulk solutions and at air-water interfaces. In particular, we have investigated the polyanion poly(sodium 4-styrenesulfonate) (NaPSS) and the cationic surfactants dodecyltrimethylammonium bromide (C12TAB), tetradecyltrimethylammonium bromide (C14TAB) and cetyltrimethylammonium bromide (C16TAB). In order to reveal the surfactant/polyelectrolyte binding, aggregation and phase separation of the mixtures, we have varied the NaPSS concentration systematically and have kept the surfactant concentration fixed at 1/6 of the respective critical micelle concentration. Information on the behavior in the bulk solution was gained by electrophoretic mobility and turbidity measurements, while the surface properties were studied using surface tension measurements and vibrational sum-frequency generation (SFG). This has enabled us to relate bulk to interfacial properties with respect to the charging state and the surfactants' binding efficiency. We found that the latter two are strongly dependent on the alkyl chain length of the surfactant and that binding is much more efficient as the alkyl chain length of the surfactant increases. This also results in a different phase behavior as shown by turbidity measurements of the bulk solutions. Charge neutral aggregates that are forming in the bulk adsorb onto the air-water interface - an effect that is likely caused by the increased hydrophobicity of CnTAB/PSS complexes. This conclusion is corroborated by SFG spectroscopy, where we observe a decrease in the intensity of O-H stretching bands, which is indicative of a decrease in surface charging and the formation of interfaces with negligible net charge. Particularly at mixing ratios that are in the equilibrium two-phase region, we observe weak O-H intensities and thus surface charging.
Collapse
Affiliation(s)
- Felix Schulze-Zachau
- Institute of Physical Chemistry and Center for Soft Nanoscience, Westfälische Wilhelms-Universität Münster, Corrensstraße 28/30, 48149 Münster, Germany.
| | | |
Collapse
|
4
|
Cheng Q, Zhang B, He Y, Lu Q, Kaplan DL. Silk Nanofibers as Robust and Versatile Emulsifiers. ACS APPLIED MATERIALS & INTERFACES 2017; 9:35693-35700. [PMID: 28961401 DOI: 10.1021/acsami.7b13460] [Citation(s) in RCA: 8] [Impact Index Per Article: 1.1] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/07/2023]
Abstract
Peptides have been extensively studied as emulsifiers due to their sequence and size control, biocompatibility, versatility, and stabilizing capacity. However, cost and mass production remain the challenges for broader utility for these emulsifiers. Here we demonstrate the utility of silk fibroin nanofibers as emulsifiers, with superior functions to the more traditional peptide emulsifiers. This silk nanofiber system is universal for different oil phases with various polarities and demonstrates control of microcapsule size through tuning the ratio of silk fibroin nanofiber solutions to oils. Besides the improved stabilizing capacity to peptides, these silk fibroin nanofibers endow additional stability to the emulsions formed under high salt concentration and low pH. Highly efficient encapsulation of biomarkers through interfacial networks suggests potential applications in therapeutics, food, and cosmetics. Compared to peptide emulsifiers, these silk fibroin nanofibers offer advantages in terms of cost, purification, and production scale, without compromising biocompatibility, stabilizing capacity, and versatility.
Collapse
Affiliation(s)
- Qingqing Cheng
- College of Chemistry, Chemical Engineering and Materials Science & Collaborative Innovation Center of Suzhou Nano Science and Technology, Soochow University , Suzhou 215123, People's Republic of China
- Key Laboratory of Stem Cells and Biomedical Materials of Jiangsu Province and Chinese Ministry of Science and Technology, Soochow University , Suzhou 215123, People's Republic of China
| | - Bingbo Zhang
- The Institute for Advanced Materials & Nano Biomedicine, Tongji University , Shanghai 200092, People's Republic of China
| | - Yao He
- Institute of Functional Nano & Soft Materials (FUNSOM) and Jiangsu Key Laboratory for Carbon-Based Functional Materials & Devices, Soochow University , Suzhou 215123, People's Republic of China
| | - Qiang Lu
- College of Chemistry, Chemical Engineering and Materials Science & Collaborative Innovation Center of Suzhou Nano Science and Technology, Soochow University , Suzhou 215123, People's Republic of China
- Key Laboratory of Stem Cells and Biomedical Materials of Jiangsu Province and Chinese Ministry of Science and Technology, Soochow University , Suzhou 215123, People's Republic of China
- National Engineering Laboratory for Modern Silk, Soochow University , Suzhou 215123, People's Republic of China
| | - David L Kaplan
- Department of Biomedical Engineering, Tufts University , Medford, Massachusetts 02155, United States
| |
Collapse
|
5
|
Braun L, Uhlig M, von Klitzing R, Campbell RA. Polymers and surfactants at fluid interfaces studied with specular neutron reflectometry. Adv Colloid Interface Sci 2017; 247:130-148. [PMID: 28822539 DOI: 10.1016/j.cis.2017.07.005] [Citation(s) in RCA: 62] [Impact Index Per Article: 8.9] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/29/2017] [Accepted: 07/08/2017] [Indexed: 01/18/2023]
Abstract
This review addresses the advances made with specular neutron reflectometry in studies of aqueous mixtures of polymers and surfactants at fluid interfaces during the last decade (or so). The increase in neutron flux due to improvements in instrumentation has led to routine measurements at the air/water interface that are faster and involve samples with lower isotopic contrast than in previous experiments. One can now resolve the surface excess of a single deuterated component on the second time scale and the composition of a mixture on the minute time scale, and information about adsorption processes and dynamic rheology can also be accessed. Research areas addressed include the types of formed equilibrium surface structures, the link to foam film stability and the range of non-equilibrium effects that dominate the behavior of oppositely charged polyelectrolyte/surfactant mixtures, macroscopic film formation in like-charged polymer/surfactant mixtures, and the properties of mixtures of bio-polymers with surfactants and lipids.
Collapse
|
6
|
Noskov BA, Krycki MM. Formation of protein/surfactant adsorption layer as studied by dilational surface rheology. Adv Colloid Interface Sci 2017; 247:81-99. [PMID: 28716186 DOI: 10.1016/j.cis.2017.07.003] [Citation(s) in RCA: 28] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/27/2017] [Revised: 06/19/2017] [Accepted: 07/02/2017] [Indexed: 12/25/2022]
Abstract
The review discusses the mechanism of formation of protein/surfactant adsorption layers at the liquid - gas interface. The complexes of globular proteins usually preserve their compact structure a low surfactant concentrations. Therefore a simple kinetic model of the adsorption of charged compact nanoparticles is discussed first and compared with experimental data. The increase of surfactant concentrations results in various conformational transitions in the surface layer. One can obtain information on the changes of the adsorption layer structure using the dilational surface rheology. The kinetic dependencies of the dynamic surface elasticity are strongly different for the adsorption of unfolded macromolecules and compact globules, and have local maxima in the former case corresponding to different steps of the adsorption. These distinctions allow tracing the changes of the tertiary structure of protein/surfactant complexes in the surface layer. The adsorption from mixed solutions of ionic surfactants with β-casein, β-lactoglobulin, bovine serum albumin and myoglobin is discussed with some details.
Collapse
|
7
|
Welbourn RJL, Bartholomew F, Gutfreund P, Clarke SM. Neutron Reflectometry of an Anionic Surfactant at the Solid-Liquid Interface under Shear. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2017; 33:5982-5990. [PMID: 28530832 DOI: 10.1021/acs.langmuir.7b00530] [Citation(s) in RCA: 6] [Impact Index Per Article: 0.9] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/07/2023]
Abstract
Neutron reflectometry with in situ rheology is used to measure the shear response of an adsorbed anionic surfactant (sodium bis(2-ethylhexyl) sulfosuccinate, AOT) at the alumina-water interface. A low surfactant concentration is measured where a single bilayer adsorbs at the interface as well as a higher concentration where a multilamellar structure forms. The low concentration structure does not change with the imposed shear (oscillatory or steady). However, the lamellar phase shows a loss of structure under both steady and oscillatory shear. There are differences between the steady and oscillatory cases, which are discussed, with both showing a strong dependence on the strain amplitude.
Collapse
Affiliation(s)
- Rebecca J L Welbourn
- BP Institute and Department of Chemistry, University of Cambridge , Madingley Rise, Madingley Road, Cambridge, U.K
| | - Felicity Bartholomew
- BP Institute and Department of Chemistry, University of Cambridge , Madingley Rise, Madingley Road, Cambridge, U.K
| | | | - Stuart M Clarke
- BP Institute and Department of Chemistry, University of Cambridge , Madingley Rise, Madingley Road, Cambridge, U.K
| |
Collapse
|
8
|
Penfold J, Thomas RK, Li P. Impact of biogenic amine molecular weight and structure on surfactant adsorption at the air–water interface. J Colloid Interface Sci 2016; 463:199-206. [DOI: 10.1016/j.jcis.2015.10.058] [Citation(s) in RCA: 6] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/08/2015] [Revised: 10/22/2015] [Accepted: 10/23/2015] [Indexed: 10/22/2022]
|
9
|
Shen LC, Nguyen XT, Hankins NP. Removal of heavy metal ions from dilute aqueous solutions by polymer–surfactant aggregates: A novel effluent treatment process. Sep Purif Technol 2015. [DOI: 10.1016/j.seppur.2015.07.065] [Citation(s) in RCA: 44] [Impact Index Per Article: 4.9] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/01/2022]
|
10
|
Thomas RK, Penfold J. Multilayering of Surfactant Systems at the Air-Dilute Aqueous Solution Interface. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2015; 31:7440-7456. [PMID: 25684058 DOI: 10.1021/la504952k] [Citation(s) in RCA: 25] [Impact Index Per Article: 2.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/04/2023]
Abstract
In the last 15 years there have been a number of observations of surfactants adsorbed at the air-water interface with structures more complicated than the expected single monolayer. These observations, mostly made by neutron or X-ray reflectivity, show structures varying from the usual monolayer to monolayer plus one or two additional bilayers to multilayer adsorption at the surface. These observations have been assembled in this article with a view to finding some common features between the very different systems and to relating them to aspects of the bulk solution phase behavior. It is argued that multilayering is primarily associated with wetting or prewetting of the air-water interface by phases in the bulk system, whose structures depend on an overall attractive force between the constituent units. Two such phases, whose formation is assumed to be partially driven by strong specific ion binding, are a concentrated lamellar phase that forms at low concentrations and a swollen lamellar phase that is not space-filling. Multilayering phenomena at the air-water interface then offer a delicate and easy means of studying the finer details of the incompletely understood attraction that leads to these two phases, as well as an interesting new means of self-assembling surface structures. In addition, multilayering is often associated with unusual wetting characteristics. Examples of systems discussed, and in some cases their bulk phase behavior, include surfactants with multivalent metal counterions, surfactants with oligomers and polymers, surfactant with hydrophobin, dichain surfactants, lung surfactant, and the unusual system of ethanolamine and stearic acid. Two situations where the air-water surface is deliberately held out of equilibrium are also assessed for features in common with the steady-state/equilibrium observations.
Collapse
Affiliation(s)
- Robert K Thomas
- †Physical and Theoretical Chemistry Laboratory, University of Oxford, South Parks Road, Oxford, OX1 3QZ, United Kingdom
| | - Jeffrey Penfold
- †Physical and Theoretical Chemistry Laboratory, University of Oxford, South Parks Road, Oxford, OX1 3QZ, United Kingdom
- ‡STFC, Rutherford-Appleton Laboratory, Chilton, Didcot, Oxfordshire OX11 0RA, United Kingdom
| |
Collapse
|
11
|
Penfold J, Thomas R, Li P. Biogenic amine – Surfactant interactions at the air–water interface. J Colloid Interface Sci 2015; 449:167-74. [DOI: 10.1016/j.jcis.2014.11.011] [Citation(s) in RCA: 8] [Impact Index Per Article: 0.9] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/20/2014] [Revised: 11/04/2014] [Accepted: 11/05/2014] [Indexed: 11/16/2022]
|
12
|
An electrochemical sensor for sodium dodecyl sulfate detection based on anion exchange using eosin Y/polyethyleneimine modified electrode. Anal Chim Acta 2014; 852:63-8. [DOI: 10.1016/j.aca.2014.09.012] [Citation(s) in RCA: 24] [Impact Index Per Article: 2.4] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/03/2014] [Revised: 09/04/2014] [Accepted: 09/09/2014] [Indexed: 11/20/2022]
|
13
|
Sharipova AA, Aidarova SB, Fainerman VB, Aksenenko EV, Bekturganova NE, Tarasevich YI, Miller R. Effect of electrolyte on adsorption of polyallyl amine hydrochloride/sodium dodecyl sulphate at water/tetradecane interface. Colloids Surf A Physicochem Eng Asp 2014. [DOI: 10.1016/j.colsurfa.2014.01.074] [Citation(s) in RCA: 5] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/25/2022]
|
14
|
Effect of surfactant hydrophobicity on the interfacial properties of polyallylamine hydrochloride/sodium alkylsulphate at water/hexane interface. Colloids Surf A Physicochem Eng Asp 2013. [DOI: 10.1016/j.colsurfa.2012.12.013] [Citation(s) in RCA: 22] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/23/2022]
|
15
|
Wen T, Li NB, Luo HQ. A Turn-On Fluorescent Sensor for Sensitive and Selective Detection of Sodium Dodecyl Sulfate Based on the Eosin Y/Polyethyleneimine System. Anal Chem 2013; 85:10863-8. [DOI: 10.1021/ac402241m] [Citation(s) in RCA: 33] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/24/2023]
Affiliation(s)
- Ting Wen
- Key Laboratory on Luminescence
and Real-Time Analysis, Ministry of Education, School of Chemistry
and Chemical Engineering, Southwest University, 2, Tiansheng Road, BeiBei District, Chongqing 400715, PR China
| | - Nian Bing Li
- Key Laboratory on Luminescence
and Real-Time Analysis, Ministry of Education, School of Chemistry
and Chemical Engineering, Southwest University, 2, Tiansheng Road, BeiBei District, Chongqing 400715, PR China
| | - Hong Qun Luo
- Key Laboratory on Luminescence
and Real-Time Analysis, Ministry of Education, School of Chemistry
and Chemical Engineering, Southwest University, 2, Tiansheng Road, BeiBei District, Chongqing 400715, PR China
| |
Collapse
|
16
|
Fechner M, Koetz J. Polyampholyte/surfactant complexes at the water-air interface: a surface tension study. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2013; 29:7600-7606. [PMID: 23721398 DOI: 10.1021/la401576q] [Citation(s) in RCA: 6] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/02/2023]
Abstract
The present paper is related to interactions between strongly alternating polyampholytes, i.e., copolymers of N,N'-diallyl-N,N'-dimethylammonium chloride and maleamic acid derivatives, varying in hydrophobicity and excess charges and the oppositely charged anionic surfactant sodium dodecyl sulfate (SDS). Surface tension measurements have revealed a complex behavior with the formation of polyampholyte-SDS complexes at water-air interfaces which depends on both the hydrophobic character of the polyampholyte and electrostatic attractive forces between the polyampholyte and the anionic surfactant in dependence on pH. Hereby, maleamic acid copolymers with additional carboxylic groups in the phenylic side chain show a significant lower surface tension at the critical association concentration (CAC) due to the formation of surface-active SDS complexes and multicomplexes. In the presence of only one carboxylic group in the p-position the CAC can be strongly shifted by varying the pH due to repulsive electrostatic interactions.
Collapse
Affiliation(s)
- Mabya Fechner
- Institut für Chemie, Universität Potsdam, Karl-Liebknecht-Strasse 24-25, Haus 25, 14476 Potsdam (Golm), Germany
| | | |
Collapse
|
17
|
Halacheva SS, Penfold J, Thomas RK, Webster JRP. Effect of polymer molecular weight and solution pH on the surface properties of sodium dodecylsulfate-poly(ethyleneimine) mixtures. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2012; 28:14909-14916. [PMID: 23020669 DOI: 10.1021/la302444b] [Citation(s) in RCA: 13] [Impact Index Per Article: 1.1] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/01/2023]
Abstract
The effect of polymer molecular weight and solution pH on the surface properties of the anionic surfactant sodium dodecylsulfate, SDS, and a range of small linear poly(ethyleneimine), PEI, polyelectrolytes of different molecular weights has been studied by surface tension, ST, and neutron reflectivity, NR, at the air-solution interface. The strong SDS-PEI interaction gives rise to a complex pattern of ST behavior which depends significantly on solution pH and PEI molecular weight. The ST data correlate broadly with the more direct determination of the surface adsorption and surface structure obtained using NR. At pH 3, 7, and 10, the strong SDS-PEI interaction results in a pronounced SDS adsorption at relatively low SDS and PEI concentrations, and is largely independent of pH and PEI molecular weight (for PEI molecular weights on the order of 320, 640, and 2000 Da). At pH 7 and 10, there are combinations of SDS and PEI concentrations for which surface multilayer structures form. For the PEI molecular weights of 320 and 640 Da, these surface multilayer structures are most well-developed at pH 10 and less so at pH 7. At the molecular weight of 2000 Da, they are poorly developed at both pH 7 and 10. This evolution in the surface structure with molecular weight is consistent with previous studies, (1) where for a molecular weight of 25,000 Da no multilayer structures were observed for the linear PEI. The results show the importance with increasing polymer molecular weight of the entropic contribution due to the polymer flexibility in control of the surface multilayer formation.
Collapse
Affiliation(s)
- Silvia S Halacheva
- Physical and Theoretical Chemistry Laboratory, Oxford University, Oxford, United Kingdom
| | | | | | | |
Collapse
|
18
|
Angus-Smyth A, Campbell RA, Bain CD. Dynamic adsorption of weakly interacting polymer/surfactant mixtures at the air/water interface. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2012; 28:12479-92. [PMID: 22746543 DOI: 10.1021/la301297s] [Citation(s) in RCA: 26] [Impact Index Per Article: 2.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/25/2023]
Abstract
The dynamic adsorption of polymer/surfactant mixtures containing poly(ethylene oxide) (PEO) with either tetradecyltrimethylammonium bromide (C(14)TAB) or sodium dodecyl sulfate (SDS) has been studied at the expanding air/water interface created by an overflowing cylinder, which has a surface age of 0.1-1 s. The composition of the adsorption layer is obtained by a new approach that co-models data obtained from ellipsometry and only one isotopic contrast from neutron reflectometry (NR) without the need for any deuterated polymer. The precision and accuracy of the polymer surface excess obtained matches the levels achieved from NR measurements of different isotopic contrasts involving deuterated polymer, and requires much less neutron beamtime. The PEO concentration was fixed at 100 ppm and the electrolyte concentration at 0.1 M while the surfactant concentration was varied over three orders of magnitude. For both systems, at low bulk surfactant concentrations, adsorption of the polymer is diffusion-controlled while surfactant adsorption is under mixed kinetic/diffusion control. Adsorption of PEO is inhibited once the surfactant coverage exceeds 2 μmol m(-2). For PEO/C(14)TAB, polymer adsorption drops abruptly to zero over a narrow range of surfactant concentration. For PEO/SDS, inhibition of polymer adsorption is much more gradual, and a small amount remains adsorbed even at bulk surfactant concentrations above the cmc. The difference in behavior of the two mixtures is ascribed to favorable interactions between the PEO and SDS in the bulk solution and at the surface.
Collapse
|
19
|
Halacheva SS, Penfold J, Thomas RK, Webster JRP. Effect of architecture on the formation of surface multilayer structures at the air-solution interface from mixtures of surfactant with small poly(ethyleneimine)s. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2012; 28:6336-6347. [PMID: 22433069 DOI: 10.1021/la3003977] [Citation(s) in RCA: 9] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/31/2023]
Abstract
The impact of ethyleneimine architecture on the adsorption behavior of mixtures of small poly(ethyleneimines) and oligoethyleneimines (OEIs) with the anionic surfactant sodium dodecylsulfate (SDS) at the air-solution interface has been studied by surface tension (ST) and neutron reflectivity (NR). The strong surface interaction between OEI and SDS gives rise to complex surface tension behavior that has a pronounced pH dependence. The NR data provide more direct access to the surface structure and show that the patterns of ST behavior are correlated with substantial OEI/SDS adsorption and the spontaneous formation of surface multilayer structures. The regions of surface multilayer formation depend upon SDS and OEI concentrations, on the solution pH, and on the OEI architecture, linear or branched. For the linear OEIs (octaethyleneimine, linear poly(ethyleneimine) or LPEI(8), and decaethyleneimine, LPEI(10)) with SDS, surface multilayer formation occurs over a range of OEI and SDS concentrations at pH 7 and to a much lesser extent at pH 10, whereas at pH 3 only monolayer adsorption occurs. In contrast, for branched OEIs BPEI(8) and BPEI(10) surface multilayer formation occurs over a wide range of OEI and SDS concentrations at pH 3 and 7, and at pH 10, the adsorption is mainly in the form of a monolayer. The results provide important insight into how the OEI architecture and pH can be used to control and manipulate the nature of the OEI/surfactant adsorption.
Collapse
Affiliation(s)
- Silvia S Halacheva
- Physical and Theoretical Chemistry Laboratory, University of Oxford, South Parks Road, Oxford, UK
| | | | | | | |
Collapse
|
20
|
Sharipova A, Aidarova S, Mucic N, Miller R. Dilational rheology of polymer/surfactant mixtures at water/hexane interface. Colloids Surf A Physicochem Eng Asp 2011. [DOI: 10.1016/j.colsurfa.2011.04.035] [Citation(s) in RCA: 27] [Impact Index Per Article: 2.1] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/24/2022]
|
21
|
Sharipova A, Aidarova S, Fainerman V, Stocco A, Cernoch P, Miller R. Dynamics of adsorption of polyallylamine hydrochloride/sodium dodecyl sulphate at water/air and water/hexane interfaces. Colloids Surf A Physicochem Eng Asp 2011. [DOI: 10.1016/j.colsurfa.2011.02.052] [Citation(s) in RCA: 16] [Impact Index Per Article: 1.2] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/18/2022]
|
22
|
Angelescu DG, Nylander T, Piculell L, Linse P, Lindman B, Tropsch J, Detering J. Adsorption of branched-linear polyethyleneimine-ethylene oxide conjugate on hydrophilic silica investigated by ellipsometry and Monte Carlo simulations. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2011; 27:9961-9971. [PMID: 21755979 DOI: 10.1021/la2017209] [Citation(s) in RCA: 8] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/31/2023]
Abstract
The adsorption of and conformation adopted by a branched-linear polymer conjugate to the hydrophilic silica-aqueous solution interface have been studied by in situ null ellipsometry and Monte Carlo simulations. The conjugate is a highly branched polyethyleneimine structure with ethyleneoxide chains grafted to its primary and secondary amino groups. In situ null ellipsometry demonstrated that the polymer conjugate adsorbs to the silica surface from water and aqueous solution of 1 mM asymmetric divalent salt (calcium and magnesium chloride to emulate hard water) over a large pH range. The adsorbed amount is hardly affected by pH and large charge reversal on the negatively charged silica surface occurred at pH = 4.0, due to the adsorption of the cationic polyelectrolyte. The Monte Carlo simulations using an appropriate coarse-grained model of the polymer in solution predicted a core-shell structure with no sharp boundary between the ethyleneimine and ethyleneoxide moieties. The structure at the interface is similar to that in solution when the polymer degree of protonation is low or moderate while at high degree of protonation the strong electrostatic attraction between the ethyleneimine core and oppositely charged silica surface distorts the ethyleneoxide shell so that an "anemone"-like configuration is adopted. The adsorption of alkyl benzene sulfonic acid (LAS) to a preadsorbed polymer layer was also investigated by null ellipsometry. The adsorption data brought additional support for the existence of a strong polymer adsorption and showed the presence of a binding which was further enhanced by the decreased solvency of the surfactant in the salt solution and confirmed the surface charge reversal by the polymer adsorption at pH = 4.0.
Collapse
|
23
|
Fechner M, Koetz J. Polyampholyte-surfactant film tuning in reverse microemulsions. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2011; 27:5316-5323. [PMID: 21462956 DOI: 10.1021/la200791k] [Citation(s) in RCA: 8] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/30/2023]
Abstract
The pH-dependent influence of two different strongly alternating copolymers [poly(N,N'-diallyl-N,N'-dimethylammonium-alt-N-phenylmaleamic carboxylate) (PalPh) and poly(N,N'-diallyl-N,N'-dimethylammonium-alt-3,5-bis(carboxyphenyl)maleamic carboxylate) (PalPhBisCarb)] based on N,N'-diallyl-N,N'-dimethylammonium chloride and maleamic acid derivatives on the phase behavior of a water-in-oil (w/o) microemulsion system made from toluene-pentanol (1:1) and sodium dodecyl sulfate was investigated. It was shown that the optically clear phase range can be extended after incorporation of these copolymers, leading to an increased water solubilization capacity. Additionally, the required amount of surfactant to establish a clear w/o microemulsion depends on the pH value, which means the hydrophobicity of the copolymers. Conductivity measurements show that droplet-droplet interactions in the w/o microemulsion are decreased at acidic but increased at alkaline pH in the presence of the copolymers. From differential scanning calorimetry measurements one can further conclude that these results are in agreement with a change of the position of the copolymer in the interfacial region of the surfactant film. The more hydrophobic PalPh can be directly incorporated into the surfactant film, whereas the phenyl groups of PalPhBisCarb flip into the water core by increasing the pH value.
Collapse
Affiliation(s)
- Mabya Fechner
- Institut für Chemie, Universität Potsdam, Karl-Liebknecht-Strasse 24-25, Haus 25, 14476 Potsdam (Golm), Germany
| | | |
Collapse
|
24
|
Hellsing MS, Rennie AR, Hughes AV. Adsorption of aerosol-OT to sapphire: lamellar structures studied with neutrons. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2011; 27:4669-4678. [PMID: 21443213 DOI: 10.1021/la1048985] [Citation(s) in RCA: 16] [Impact Index Per Article: 1.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/30/2023]
Abstract
The adsorption of sodium bis 2-ethylhexyl sulfosuccinate, NaAOT, to a sapphire surface from aqueous solution has been studied by neutron reflection at concentrations above the critical micelle concentration (cmc). Complementary measurements of the bulk structure were made with small-angle neutron scattering and grazing incidence small-angle neutron scattering. At a concentration of about 1% wt (10 × cmc), lamellar phase NaAOT was observed both at the surface and in the bulk. The structure seen at the interface for a solution of 2% wt NaAOT is a 35 ± 2 Å thick bilayer adsorbed to the sapphire surface at maximum packing density, followed by an aligned stack of fluctuating bilayers of thickness 51 ± 2 Å and with an area per molecule of 40 ± 2 Å(2). Each bilayer is separated by a water: at 25 °C, this layer is 148 ± 2 Å. A simple model for the reflectivity from fluctuating layers is presented, and for 2.0% wt NaAOT the fluctuations were found to have an amplitude of 25 ± 5 Å. The temperature sensitivity of the structure at the surface was investigated in the range 15-30 °C. The effect of temperature was pronounced, with the solvent layer becoming thinner and the volume occupied by the NaAOT molecules in a bilayer increasing with temperature. The amplitude of the fluctuations, however, is approximately temperature independent in this range. The adsorption of NaAOT at the sapphire surface resembles that previously found at hydrophilic and hydrophobic silica surfaces. The coexisting bulk lamellar phase has a spacing of layers similar to that observed at the surface. These observations are an indication that the major driving force for adsorption is self-assembly, independent of the chemical nature of the interface.
Collapse
Affiliation(s)
- Maja S Hellsing
- Materials Physics, Department of Physics and Astronomy, Ångström Laboratory, Uppsala University, Box 516, 751 20, Uppsala, Sweden.
| | | | | |
Collapse
|
25
|
The role of electrolyte and polyelectrolyte on the adsorption of the anionic surfactant, sodium dodecylbenzenesulfonate, at the air–water interface. J Colloid Interface Sci 2011; 356:656-64. [DOI: 10.1016/j.jcis.2011.01.024] [Citation(s) in RCA: 21] [Impact Index Per Article: 1.6] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/01/2010] [Revised: 01/06/2011] [Accepted: 01/08/2011] [Indexed: 11/22/2022]
|
26
|
Zhang X, Taylor D, Thomas R, Penfold J. The effects of the addition of the polyelectrolyte, poly(ethyleneimine), on the adsorption of mixed surfactants of sodium dodecylsulfate and dodecyldimethylaminoacetate at the air–water interface. J Colloid Interface Sci 2011; 356:647-55. [DOI: 10.1016/j.jcis.2011.01.026] [Citation(s) in RCA: 6] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/01/2010] [Revised: 01/06/2011] [Accepted: 01/08/2011] [Indexed: 10/18/2022]
|
27
|
Zhang XL, Taylor DJF, Thomas RK, Penfold J. Adsorption of polyelectrolyte/surfactant mixtures at the air-water interface: modified poly(ethyleneimine) and sodium dodecyl sulfate. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2011; 27:2601-2612. [PMID: 21265512 DOI: 10.1021/la104698w] [Citation(s) in RCA: 24] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/30/2023]
Abstract
The adsorption of surfactant/polyelectrolyte mixtures of sodium dodecyl sulfate (SDS) and different modified poly(ethyleneimine) (PEI) polyelectrolytes at the air-water interface has been studied using neutron reflectivity and surface tension. Modification of the PEI by the addition of short ethylene oxide (EO) or propylene oxide (PO) groups is shown to have an impact upon the surface adsorption behavior. This is due to a modification of the polymer/surfactant interaction, an increase in the intrinsic surface activity of the modified polyelectrolyte, and changes in the relative importance of surface and solution complex formation. For the polyelectrolyte PEI, there is a marked change in the surface adsorption behavior between the addition of a single EO group and that of the (EO)3 group. The addition of a single EO or PO group to the PEI results in an SDS concentration and solution pH adsorption dependence that is broadly similar in behavior to that of the unmodified PEI/SDS mixture. That is, there is strong surface complexation and adsorption down to low SDS concentrations, and there is evidence of a strong interaction at high pH in addition to the strong electrostatic attraction at low pH. The addition of a larger ethylene oxide group, triethylene oxide (EO)3, results in a surface adsorption behavior that more closely resembles that of a neutral polymer/ionic surfactant mixture, similar to that observed for PEI with a larger ethylene oxide group, notably PEI-(EO)7. In that case, the adsorption of the polymer/surfactant complex is much less pronounced. The adsorption arises predominantly from competition between the polymer and surfactant and indicates a decrease in the polymer/surfactant interaction with increasing pH. That is, increasing the size of the ethylene oxide group induces a transition from a strong surface polymer/surfactant interaction to a weak polymer/surfactant interaction.
Collapse
Affiliation(s)
- X L Zhang
- Physical and Theoretical Chemistry Laboratory, Oxford University , South Parks Road, Oxford, U.K
| | | | | | | |
Collapse
|
28
|
Tucker I, Penfold J, Thomas RK, Dong CC, Golding S, Gibson C, Grillo I. Surface and solution properties of anionic/nonionic surfactant mixtures of alkylbenzene sulfonate and triethyleneglycol decyl ether. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2010; 26:10614-10626. [PMID: 20423066 DOI: 10.1021/la100846b] [Citation(s) in RCA: 13] [Impact Index Per Article: 0.9] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/29/2023]
Abstract
The surface adsorption behavior and the solution microstructure of mixtures of the C(6) isomer of anionic surfactant sodium para-dodecyl benzene sulfonate, ABS, with nonionic surfactant monodecyl triethyleneglycol ether, C(10)E(3,) have been investigated using a combination of neutron reflectivity, NR, and small-angle neutron scattering, SANS. In solution, the mixing of C(10)E(3) and ABS results in the formation of small globular micelles over most of the composition range (100:0 to 20:80 ABS/C(10)E(3)). Planar aggregates (lamellar or unilamellar vesicles, ULV) are observed for solution compositions rich in the nonionic surfactant (>80 mol % nonionic). Prior to the transition to planar aggregates, the micelle aggregation number increases with increasing nonionic composition. The lamellar-phase region is preceded by a narrow range of composition over which mixtures of micelles and small unilamellar vesicles coexist. The variation in surface absorption behavior with solution composition shows a strong surface partitioning of the more surface-active component, C(10)E(3). This pronounced departure from ideal mixing is not readily explained by existing surfactant mixing theories. In the presence of Ca(2+) ions, a more complex evolution of solution phase behavior with solution composition is observed. The lamellar-phase region occurs over a broader range of solution compositions at the expense of the small-vesicle phase. The phase boundaries are shifted to lower nonionic compositions, and the extent to which the solution-phase diagrams are modified increases with increasing calcium ion concentration. The SANS data for the large planar aggregates are consistent with large polydisperse flexible unilamellar vesicles. In the presence of Ca(2+) ions, the surface adsorption patterns become more consistent with ideal mixing in the nonionic-rich region of the surface-phase diagram. However, in the ABS-rich regions the surface behavior is more complex because of the spontaneous formation of more complex surface microstructures (bilayers to multilayers). Both in water and in the presence of Ca(2+) ions the variations in the surface adsorption behavior and in the solution mesophase structure do not appear to be closely correlated.
Collapse
Affiliation(s)
- I Tucker
- Unilever Research and Development Laboratory, Port Sunlight, Quarry Road East, Bebington, Wirral, UK.
| | | | | | | | | | | | | |
Collapse
|
29
|
Kristen N, Vüllings A, Laschewsky A, Miller R, von Klitzing R. Foam films from oppositely charged polyelectolyte/surfactant mixtures: effect of polyelectrolyte and surfactant hydrophobicity on film stability. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2010; 26:9321-9327. [PMID: 20229994 DOI: 10.1021/la1002463] [Citation(s) in RCA: 23] [Impact Index Per Article: 1.6] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/28/2023]
Abstract
The present study focuses on the stability control of foam films from oppositely charged polyelectrolyte/surfactant mixtures, namely, on the cationic surfactant dodecyl trimethyl ammonium bromide (C(12)TAB) mixed with highly negatively charged polyelectrolytes. The net charge of the system can be tuned by varying the polyelectrolyte concentration so that the film behavior around the isoelectric point (IEP) can be studied. The measurements of the disjoining pressure isotherms show that the polyelectrolyte/surfactant ratio has an important influence on film stability, with a stability minimum close to the IEP and very stable films above that point. However, in the concentration regime in which the most stable films are formed, the surface coverage is very low, implying that the net charge in the system dominates the film stability and not the complexes at the surface. Comparison with a previous work showed that the choice of surfactant plays an important role for tuning the foam stability while the type of polyelectrolyte has only a minor impact.
Collapse
Affiliation(s)
- Nora Kristen
- Stranski-Laboratorium, Department of Chemistry, TU Berlin, Strasse des 17.Juni 124, 10623 Berlin, Germany
| | | | | | | | | |
Collapse
|
30
|
Polyelectrolyte–surfactant complexes on solid surface. J Colloid Interface Sci 2010; 344:547-55. [DOI: 10.1016/j.jcis.2009.12.038] [Citation(s) in RCA: 10] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/18/2009] [Revised: 12/18/2009] [Accepted: 12/19/2009] [Indexed: 11/21/2022]
|
31
|
Bain C, Claesson P, Langevin D, Meszaros R, Nylander T, Stubenrauch C, Titmuss S, von Klitzing R. Complexes of surfactants with oppositely charged polymers at surfaces and in bulk. Adv Colloid Interface Sci 2010; 155:32-49. [PMID: 20167304 DOI: 10.1016/j.cis.2010.01.007] [Citation(s) in RCA: 184] [Impact Index Per Article: 13.1] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/12/2009] [Revised: 01/14/2010] [Accepted: 01/15/2010] [Indexed: 11/28/2022]
Abstract
Addition of surfactants to aqueous solutions of polyelectrolytes carrying an opposite charge causes the spontaneous formation of complexes in the bulk phase in certain concentration ranges. Under some conditions, compact monodisperse multichain complexes are obtained in the bulk. The size of these complexes depends on the mixing procedure and it can be varied in a controlled way from nanometers up to micrometers. The complexes exhibit microstructures analogous to those of the precipitates formed at higher concentrations. In other cases, however, the bulk complexes are large, soft and polydisperse. In most cases, the dispersions are only kinetically stable and exhibit pronounced non-equilibrium features. Association at air-water interfaces readily occurs, even at very small concentrations. When the surfactant concentration is small, the surface complexes are usually made of a surfactant monolayer to which the polymer binds and adsorbs in a flat-like configuration. However, under some conditions, thicker layers can be found, with bulk complexes sticking to the surface. The association at solid-water interfaces is more complex and depends on the specific interactions between surfactants, polymers and the surface. However, the behaviour can be understood if distinctions between hydrophilic surfaces and hydrophobic surfaces are made. Note that the behaviour at air-water interfaces is closer to that of hydrophobic than that of hydrophilic solid surfaces. The relation between bulk and surface complexation will be discussed in this review. The emphasis will be given to the results obtained by the teams of the EC-funded Marie Curie RTN "SOCON".
Collapse
|
32
|
Cui Y, Pelton R, Cosgrove T, Richardson R, Dai S, Prescott S, Grillo I, Ketelson H, Meadows D. Not all anionic polyelectrolytes complex with DTAB. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2009; 25:13712-13717. [PMID: 19466812 DOI: 10.1021/la900563y] [Citation(s) in RCA: 9] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/27/2023]
Abstract
The influence of hydroxypropyl guar (HPG), with and without boric acid, on dodecyltrimethyl ammonium bromide (DTAB) micellization was characterized by surface tension measurements, isothermal titration calorimetry, and small-angle neutron scattering. Although HPG is a nonionic water-soluble polymer, borate ions form weak bonds with HPG, transforming it into an anionic polyelectrolyte, HPG-borate. Surprisingly, the three independent measurements showed that HPG-borate does not promote DTAB micellization or phase separation normally seen when mixing oppositely charged polyelectrolytes and surfactants. However, the neutron scattering results suggested that HPG-borate binds to and flocculates existing DTAB micelles. The unusual behavior of HPG-borate with DTAB was underscored by showing that carboxymethyl guar (CMG) formed precipitates with DTAB.
Collapse
Affiliation(s)
- Yuguo Cui
- Department of Chemical Engineering JHE-136, McMaster University, Hamilton, Ontario, Canada L8S 4L7
| | | | | | | | | | | | | | | | | |
Collapse
|
33
|
Şakar-Deliormanlı A. Interaction of Sodium Dodecyl Sulfate with Poly(ethyleneimine) in Bulk Solution and at the Air-Solution Interface. J DISPER SCI TECHNOL 2009. [DOI: 10.1080/01932690903123692] [Citation(s) in RCA: 5] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/20/2022]
|
34
|
Aberg C, Sparr E, Edler KJ, Wennerström H. Nonequilibrium phase transformations at the air-liquid interface. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2009; 25:12177-12184. [PMID: 19754062 DOI: 10.1021/la900867k] [Citation(s) in RCA: 9] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/28/2023]
Abstract
A theoretical model is presented for the formation of an ordered phase close to the air-liquid interface of an open binary aqueous solution. The chemical potential of water in the liquid phase is, in general, not equal to the chemical potential of water in the ambient atmosphere. There are therefore nonequilibrium conditions close to the air-liquid interface. There is also a gradient in the chemical potential of water, which could lead to the formation of a new interfacial phase. The formation of an interfacial phase is analyzed in terms of the equilibrium phase behavior corresponding to the local water chemical potential. The possibility of forming an interfacial phase is strongly dependent on the ambient conditions, bulk composition, and diffusive transport properties of the phases in question. Explicit calculations are presented for the formation of a lamellar liquid-crystalline phase close to the air-liquid interface of an isotropic surfactant solution with parameters chosen from the sodium bis(2-ethylhexyl)sulfosuccinate (AOT)/water system. We consider the relevance of the model to neutron reflectivity studies of the interface between air and surfactant/water systems, as well as to surfactant/polymer/water systems.
Collapse
|
35
|
Zarbakhsh A, Webster JRP, Wojciechowski K. Neutron reflectivity study of alkylated azacrown ether at the air-liquid and the liquid-liquid interfaces. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2009; 25:11569-11575. [PMID: 19618924 DOI: 10.1021/la901485w] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/28/2023]
Abstract
We report the neutron reflectometry study of partially deuterated di-hexadecyl-diaza-18-crown-6 ether (d-ACE-16) at the air-water and the oil-water interfaces. At the air-water interface, the thickness of the monolayer is smaller than that for a fully stretched d-ACE-16 molecule, suggesting a tilt of the alkyl chains with respect to the normal. At the oil-water interface, the same molecules were found to form a more diffuse layer distribution stretching across both sides of the interface. On the oil side, the molecules are densely packed within a thickness of 17 A, the hydrophilic part of the molecule with the azacrown ether ring being immersed in the adjacent aqueous side of the interface. The latter consists of a thick 38 A layer comprising staggered, loosely adsorbed d-ACE-16 molecules. With increasing spread amount, the adsorbed layer density increases at the oil side until saturation at ca. 2.25 x 10(-6) mol m(-2), above which the layer collapses.
Collapse
Affiliation(s)
- A Zarbakhsh
- School of Biological & Chemical Sciences, Queen Mary, University of London, Walter Basent Building, Mile End Road, London E1 4NS, UK.
| | | | | |
Collapse
|
36
|
Mezei A, Abrahám A, Pojják K, Mészáros R. The impact of electrolyte on the aggregation of the complexes of hyperbranched poly(ethyleneimine) and sodium dodecyl sulfate. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2009; 25:7304-7312. [PMID: 19563222 DOI: 10.1021/la9003388] [Citation(s) in RCA: 15] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/28/2023]
Abstract
The aggregation of the negatively charged complexes of hyperbranched poly(ethylenimine) (PEI) and sodium dodecyl sulfate (SDS) has been investigated at different sodium chloride (NaCl) concentrations using coagulation kinetics, electrophoretic mobility and dynamic light scattering measurements. The observed variation of the initial rate of coagulation with NaCl concentration indicates the formation of kinetically stable colloid dispersions in the investigated composition and pH range. These dispersions are electrostatically stabilized due to the adsorption of excess dodecyl sulfate ions on the surface of the polyelectrolyte/surfactant particles. Because of the enhanced adsorption of the anionic surfactant, the kinetic stability of the PEI/SDS dispersions increases with increasing SDS concentration and decreasing pH. Finally, we rationalize the effect of salt on the phase behavior and surface properties of polyelectrolyte/surfactant mixtures in terms of the salt-induced aggregation features of polyelectrolyte/surfactant particles.
Collapse
Affiliation(s)
- Amália Mezei
- Laboratory of Interfaces and Nanosized Systems, Institute of Chemistry, Eötvös Loránd University, 1117 Budapest, Hungary
| | | | | | | |
Collapse
|
37
|
Kristen N, Simulescu V, Vüllings A, Laschewsky A, Miller R, von Klitzing R. No Charge Reversal at Foam Film Surfaces after Addition of Oppositely Charged Polyelectrolytes? J Phys Chem B 2009; 113:7986-90. [DOI: 10.1021/jp902369d] [Citation(s) in RCA: 35] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
Affiliation(s)
- Nora Kristen
- Stranski-Laboratorium, Department of Chemistry, TU Berlin, Strasse des 17.Juni 124, 10623 Berlin, Germany, West University Timisoara, V. Parvan no. 4, Timisoara 300223, Romania, Fraunhofer Institute for Applied Polymer Research, Geiselbergstrasse 69, 14476 Potsdam-Golm, Germany, Max Planck Institute of Colloids and Interfaces, Am Mühlenberg 1, 14476 Postdam-Golm, Germany
| | - Vasile Simulescu
- Stranski-Laboratorium, Department of Chemistry, TU Berlin, Strasse des 17.Juni 124, 10623 Berlin, Germany, West University Timisoara, V. Parvan no. 4, Timisoara 300223, Romania, Fraunhofer Institute for Applied Polymer Research, Geiselbergstrasse 69, 14476 Potsdam-Golm, Germany, Max Planck Institute of Colloids and Interfaces, Am Mühlenberg 1, 14476 Postdam-Golm, Germany
| | - Andrea Vüllings
- Stranski-Laboratorium, Department of Chemistry, TU Berlin, Strasse des 17.Juni 124, 10623 Berlin, Germany, West University Timisoara, V. Parvan no. 4, Timisoara 300223, Romania, Fraunhofer Institute for Applied Polymer Research, Geiselbergstrasse 69, 14476 Potsdam-Golm, Germany, Max Planck Institute of Colloids and Interfaces, Am Mühlenberg 1, 14476 Postdam-Golm, Germany
| | - André Laschewsky
- Stranski-Laboratorium, Department of Chemistry, TU Berlin, Strasse des 17.Juni 124, 10623 Berlin, Germany, West University Timisoara, V. Parvan no. 4, Timisoara 300223, Romania, Fraunhofer Institute for Applied Polymer Research, Geiselbergstrasse 69, 14476 Potsdam-Golm, Germany, Max Planck Institute of Colloids and Interfaces, Am Mühlenberg 1, 14476 Postdam-Golm, Germany
| | - Reinhard Miller
- Stranski-Laboratorium, Department of Chemistry, TU Berlin, Strasse des 17.Juni 124, 10623 Berlin, Germany, West University Timisoara, V. Parvan no. 4, Timisoara 300223, Romania, Fraunhofer Institute for Applied Polymer Research, Geiselbergstrasse 69, 14476 Potsdam-Golm, Germany, Max Planck Institute of Colloids and Interfaces, Am Mühlenberg 1, 14476 Postdam-Golm, Germany
| | - Regine von Klitzing
- Stranski-Laboratorium, Department of Chemistry, TU Berlin, Strasse des 17.Juni 124, 10623 Berlin, Germany, West University Timisoara, V. Parvan no. 4, Timisoara 300223, Romania, Fraunhofer Institute for Applied Polymer Research, Geiselbergstrasse 69, 14476 Potsdam-Golm, Germany, Max Planck Institute of Colloids and Interfaces, Am Mühlenberg 1, 14476 Postdam-Golm, Germany
| |
Collapse
|
38
|
Penfold J, Thomas RK, Zhang XL, Taylor DJF. Nature of amine-surfactant interactions at the air-solution interface. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2009; 25:3972-3980. [PMID: 19714886 DOI: 10.1021/la8024843] [Citation(s) in RCA: 16] [Impact Index Per Article: 1.1] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/28/2023]
Abstract
The surface tension and adsorption behavior of polymer/surfactant mixtures of polyethyleneimine (PEI)/sodium dodecyl sulfate (SDS) is strongly dependent on pH. At both low and high pH, a strong PEI/SDS interaction gives rise to surface polymer/surfactant complex formation that results in significantly enhanced SDS adsorption at very low SDS concentrations and in multilayer formation at the interface. At low pH, this strong PEI/SDS interaction is dominated by the electrostatic attraction between the two oppositely charged species. However, at high pH the PEI is essentially neutral, and the origin of the "hydrophobic" interaction, or interaction of nonelectrostatic origin, is less clear. To investigate the origins of this interaction further, we have used neutron reflectivity and surface tension to study the pH dependence of the surface adsorption of different anionic surfactants-SDS, lithium dodecyl sulfate (LiDS), and sodium dodecyl benzene sulfonate (LAS)--in the presence of a range of small amine molecules (from ethylenediamine to pentaethylenehexamine). Analogous to that observed in PEI/SDS mixtures, the presence of amine molecules induces a strong enhancement in the surfactant adsorption at both low and high pH, which can result in extreme cases in multilayer formation at the interface. At high pH, the adsorption is highly dependent upon the amine molecular weight and is equivalent to that observed at low pH by the time the molecular weight of the amine has increased to that of pentaethylenehexamine. We attribute this nonelectrostatic interaction observed at high pH to the combined effect of a dipole-dipole interaction between the sulfate (or sulfonate) headgroup and the amine nitrogens and a cooperative hydrophobic interaction between the chains of the attached surfactants. At high pH and when there are at least six amine groups present, this effect appears to be equivalent in strength to the electrostatic attraction that dominates at low pH. These results are significant in the context of understanding the unusual nature of the PEI/surfactant interaction and of using small molecular weight additives rather than much larger molecular weight polymers to manipulate adsorption properties.
Collapse
Affiliation(s)
- J Penfold
- ISIS, STFC, Rutherford Appleton Laboratory, Chilton, Didcot, OXON, UK.
| | | | | | | |
Collapse
|
39
|
Tonigold K, Varga I, Nylander T, Campbell RA. Effects of aggregates on mixed adsorption layers of poly(ethylene imine) and sodium dodecyl sulfate at the air/liquid interface. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2009; 25:4036-4046. [PMID: 19714890 DOI: 10.1021/la8028325] [Citation(s) in RCA: 49] [Impact Index Per Article: 3.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/28/2023]
Abstract
We have exploited the spatial and kinetic resolution of ellipsometry to monitor the lateral movement of inhomogeneous patches of material in mixed adsorption layers of poly(ethylene imine) and sodium dodecyl sulfate at the air/liquid interface. We show that the choice of sample preparation methods can have a profound effect on the state of the interface for chemically equivalent samples. The extent of aggregation in the bulk solution on relevant time scales is affected by specific details of the polymer/surfactant mixing process, which produces varying numbers of aggregates that can become trapped in the interfacial layer, resulting in an enhanced and fluctuating ellipsometry signal. It can be beneficial to apply the surface-cleaning method of aspiration prior to physical measurements to remove trapped aggregates through the creation of a fresh interface. At low pH, the ellipsometry signal of samples prepared with surface cleaning is remarkably constant over a factor of >500 in the bulk composition below charge equivalence, which is discussed in terms of possible adsorption mechanisms. At high pH, through observing temporal fluctuations in the ellipsometry signal of samples prepared with surface cleaning, we reveal two important processes: there is the spontaneous adsorption of aggregates > 0.2 microm in diameter into the interfacial layer, and with time there is the fusion of smaller aggregates to generate new large surface aggregates. We attribute the favorability of the adsorption and fusion processes at high pH to reduced electrostatic barriers resulting from the low surface charge density of the aggregates. It is inappropriate in this case to consider the interface to comprise a homogeneous adsorption layer that is in dynamic equilibrium with the bulk solution. Our work shows that it can be helpful to consider whether there are macroscopic particles embedded in molecular layers at the air/liquid interface for systems where there is prior knowledge of aggregation in the bulk phase.
Collapse
Affiliation(s)
- Katrin Tonigold
- Department of Physical Chemistry 1, Lund University, P.O. Box 124, S-221 00 Lund, Sweden
| | | | | | | |
Collapse
|
40
|
Nizri G, Makarsky A, Magdassi S, Talmon Y. Nanostructures formed by self-assembly of negatively charged polymer and cationic surfactants. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2009; 25:1980-1985. [PMID: 19143559 DOI: 10.1021/la8031013] [Citation(s) in RCA: 35] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/27/2023]
Abstract
The formation of nanoparticles by interaction of an anionic polyelectrolyte, sodium polyacrylate (NaPA), was studied with a series of oppositely charged surfactants with different chain lengths, alkyltrimethylammonium bromide (CnTAB). The binding and formation of nanoparticles was characterized by dynamic light scattering, zeta-potential, and self-diffusion NMR. The inner nanostructure of the particles was observed by direct-imaging cryogenic-temperature transmission electron microscopy (cryo-TEM), indicating aggregates of hexagonal liquid crystal with nanometric size.
Collapse
Affiliation(s)
- G Nizri
- Casali Institute of Applied Chemistry, The Hebrew University of Jerusalem, Jerusalem 91904, Israel
| | | | | | | |
Collapse
|
41
|
Kundu S, Langevin D, Lee LT. Neutron reflectivity study of the complexation of DNA with lipids and surfactants at the surface of water. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2008; 24:12347-12353. [PMID: 18828609 DOI: 10.1021/la801465p] [Citation(s) in RCA: 18] [Impact Index Per Article: 1.1] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/26/2023]
Abstract
Complexation of lipids and surfactants with short DNA fragments at the air-water interface has been studied by neutron reflectivity. Complexation with zwitterionic lipids occurs in the presence of divalent cations, and ion specificity has been demonstrated (binding is less effective with Ba2+ than with Mg2+ or Ca2+). One and two DNA layers have been observed for dilute and more compact lipid monolayers, respectively. Two DNA layers have also been found with the soluble cationic surfactant dodecyltrimethylammonium bromide (DTAB), except close to the precipitation boundary. This result is opposite to that found in ellipsometry where very thick layers are found in this region. It is possible that the ellipsometry signal is due to highly hydrated bulk complexes adsorbing at the surface, not seen by neutrons because of unfavorable contrast conditions. Long DNA was found to be less keen to form surface complexes than short DNA fragments.
Collapse
Affiliation(s)
- S Kundu
- Laboratoire de Physique des Solides, Université Paris Sud, CNRS, UMR, Orsay, France
| | | | | |
Collapse
|
42
|
Nizri G, Lagerge S, Kamyshny A, Major DT, Magdassi S. Polymer-surfactant interactions: binding mechanism of sodium dodecyl sulfate to poly(diallyldimethylammonium chloride). J Colloid Interface Sci 2008; 320:74-81. [PMID: 18255091 DOI: 10.1016/j.jcis.2008.01.016] [Citation(s) in RCA: 66] [Impact Index Per Article: 4.1] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/21/2007] [Revised: 01/10/2008] [Accepted: 01/11/2008] [Indexed: 10/22/2022]
Abstract
The binding mechanism of poly(diallyldimethylammonium chloride), PDAC, and sodium dodecyl sulfate, SDS, has been comprehensively studied by combining binding isotherms data with microcalorimetry, zeta potential, and conductivity measurements, as well as ab initio quantum mechanical calculations. The obtained results demonstrate that surfactant-polymer interaction is governed by both electrostatic and hydrophobic interactions, and is cooperative in the presence of salt. This binding results in the formation of nanoparticles, which are positively or negatively charged depending on the molar ratio of surfactant to PDAC monomeric units. From microcalorimetry data it was concluded that the exothermic character of the interaction diminishes with the increase in the surfactant/polymer ratio as well as with an increase in electrolyte concentration.
Collapse
Affiliation(s)
- Gilat Nizri
- Casali Institute of Applied Chemistry, The Hebrew University of Jerusalem, Jerusalem 91904, Israel
| | | | | | | | | |
Collapse
|