Size and shape of micelles studied by means of SANS, PCS, and FCS

Depletion-driven antiferromagnetic, paramagnetic, and ferromagnetic behavior in quasi-two-dimensional buckled colloidal solids

We investigate quasi-two-dimensional buckled colloidal monolayers on a triangular lattice with tunable depletion interactions. Without depletion attraction, the experimental system provides a colloidal analog of the well-known geometrically frustrated Ising antiferromagnet [Y. Han et al., Nature 456, 898-903 (2008)]. In this contribution, we show that the added depletion attraction can influence both the magnitude and sign of an Ising spin coupling constant. As a result, the nearest-neighbor Ising "spin" interactions can be made to vary from antiferromagnetic to para- and ferromagnetic. Using a simple theory, we compute an effective Ising nearest-neighbor coupling constant, and we show how competition between entropic effects permits for the modification of the coupling constant. We then experimentally demonstrate depletion-induced modification of the coupling constant, including its sign, and other behaviors. Depletion interactions are induced by rod-like surfactant micelles that change length with temperature and thus offer means for tuning the depletion attraction in situ. Buckled colloidal suspensions exhibit a crossover from an Ising antiferromagnetic to paramagnetic phase as a function of increasing depletion attraction. Additional dynamical experiments reveal structural arrest in various regimes of the coupling-constant, driven by different mechanisms. In total, this work introduces novel colloidal matter with "magnetic" features and complex dynamics rarely observed in traditional spin systems.

Surfactant induced gelation of TEMPO-oxidized cellulose nanofibril dispersions probed using small angle neutron scattering

In this work, we studied TEMPO-oxidized cellulose nanofibril (OCNF) suspensions in the presence of diverse surfactants. Using a combination of small angle neutron scattering (SANS) and rheology, we compared the physical properties of the suspensions with their structural behavior. Four surfactants were studied, all with the same hydrophobic tail length but different headgroups: hexaethylene glycol mono-n-dodecyl ether (C₁₂EO₆, nonionic), sodium dodecyl sulfate (SDS, anionic), cocamidopropyl betaine (CapB, zwitterionic), and dodecyltrimethylammonium bromide (DTAB, cationic). Contrast variation SANS studies using deuterated version of C₁₂EO₆ or SDS, or by varying the D₂O/H₂O ratio of the suspensions (with CapB), allowed focusing only on the structural properties of OCNFs or surfactant micelles. We showed that, in the concentration range studied, for C₁₂EO₆, although the nanofibrils are concentrated thanks to an excluded volume effect observed in SANS, the rheological properties of the suspensions are not affected. Addition of SDS or CapB induces gelation for surfactant concentrations superior to the critical micellar concentration (CMC). SANS results show that attractive interactions between OCNFs arise in the presence of these anionic or zwitterionic surfactants, hinting at depletion attraction as the main mechanism of gelation. Finally, addition of small amounts of DTAB (below the CMC) allows formation of a tough gel by adsorbing onto the OCNF surface.

Single-Micelle and Single-Zinc-Particle Imaging Provides Insights into the Physical Processes Underpinning Organozinc Reactions in Water

Micelles on the surfaces of individual metallic zinc particles are imaged by fluorescence microscopy with sensitivity up to single micelles. These micelles are made fluorescent to enable imaging, through the incorporation of boron dipyrromethene fluorophores as representative organic molecular "cargo". Highlighting an advantage of this in situ and sensitive fluorescence technique, the same micelles are not visible by ex situ scanning electron microscopy/energy dispersive X-ray spectroscopy analysis. Examination of micellar solutions with zinc reveals an aging process: micelles do not immediately adhere to the zinc surfaces upon mixing but rather build up over time. Furthermore, at longer times, smaller zinc particles become fully encased in micelle "shells". Once adhered, micelles remain in the local regions of the zinc surface for the duration of the imaging experiments (>2 h). Single micelles are imaged in solution, and their molecular contents are characterized. Two-color fluorescence crossover experiments show that micelles adhered to the surface of the zinc exchange molecular contents with micelles in solution, achieving molecular exchange equilibrium in ∼2.5 h. Unique (non-ensemble averaged) exchange kinetics are displayed by micelles at different locations on the zinc surface, consistent with exchange kinetics of single micelles or small local clusters of micelles. The aging of the micellar solutions and the rate of exchange while on the surface of the zinc suggest that micelle mass transport processes may contribute to overall reaction barriers in sustainable organozinc cross-coupling reactions in micellar water. The observed aging of the system suggests routes for improvement of preparative, bench-scale synthetic reactions involving micellar preparations of organozinc compounds.

DNA-assembled visible nanodandelions with explosive hydrogen-bond breakage achieving uniform intra-tumor distribution (UITD)-guided photothermal therapy

Photothermal therapy (PTT) has received increasing attention for treating tumors. However, a long-standing challenge in PTT is non-uniform distribution of photothermal agents (PAs) in tumor tissues, resulting in limited therapeutic efficiency. Herein, inspired by dandelions blowing away by the wind, we have designed a DNA-assembled visible GRS-DNA-CuS nanodandelion, which can achieve uniform intra-tumor distribution (UITD) of PAs, thus enhancing the photothermal therapeutic efficiency. GRS-DNA-CuS is featured by the formation of hydrogen bond between the core of single-strand DNA-modified Raman nanoprobes (GRS) and the shell of complementary single-strand DNA-modified CuS PAs. Under Raman imaging-guided 1st NIR irradiation, hydrogen bond in GRS-DNA-CuS is explosively broken, resulting in large-sized GRS-DNA-CuS (∼135 nm) be completely dissociated into GRS and ultra-small CuS PAs (∼12 nm) within 1 min. Such an explosive dissociation instantly enhances the local concentration of ultra-small CuS PAs and slightly rises intra-tumor temperature, thus increasing the diffusion coefficient of PAs and promoting their UITD. This UITD of CuS PAs enhances the photothermal anti-tumor effects. Three out of five tumors are completely eliminated under photoacoustic imaging-guided 2nd NIR irradiation. Overall, this study provides one UITD-guided PTT strategy for highly effective tumor treatment by exerting explosive breakage property of hydrogen bond, broadening the application scope of DNA-assembly technique in oncology field.

Aqueous phase behavior of the PEO-containing non-ionic surfactant C12E6: A molecular dynamics simulation study

HYPOTHESIS

Non-ionic surfactants containing polyethylene oxide (PEO) chains are widely used in drug formulations, cosmetics, paints, textiles and detergents. High quality molecular dynamics models for PEO surfactants can give us detailed, atomic-scale information about the behavior of surfactant/water mixtures.

SIMULATIONS

We used two molecular dynamics force fields (FFs), 2016H66 and 53A6_DBW, to model the simple non-ionic PEO surfactant, hexaoxyethylene dodecyl ether (C₁₂E₆). We investigated surfactant/water mixtures that span the phase diagram of starting from randomly distributed arrangements. In some cases, we also started with prebuilt, approximate models. The simulations results were compared with the experimentally observed phase behavior.

FINDINGS

Overall, this study shows that the spontaneous self-assembly of PEO non-ionic surfactants into different colloidal structures can be accurately modeled with MD simulations using the 2016H66 FF although transitions to well-formed hexagonal phase are slow. Of the two FFs investigated, the 2016H66 FF better reproduces the experimental phase behavior across all regions of the C₁₂E_6/water phase diagram.

Antagonistic mixing in micelles of amphiphilic polyoxometalates and hexaethylene glycol monododecyl ether

HYPOTHESIS

Polyoxometalates (POMs) are metal oxygen clusters with a range of interesting magnetic and catalytic properties. POMs with attached hydrocarbon chains show amphiphilic behaviour so we hypothesised that mixtures of a nonionic surfactant and anionic surfactants with a polyoxometalate cluster as headgroup would form mixed micelles, giving control of the POM density in the micelle, and which would differ in size and shape from micelles formed by the individual surfactants. Due to the high charge and large size of the POM, we suggested that these would be nonideal mixtures due to the complex interactions between the two types of surfactants. The nonideality and the micellar composition may be quantified using regular solution theory. With supplementary information provided by small-angle neutron scattering (SANS), an understanding of this unusual binary surfactant system can be established.

EXPERIMENTS

A systematic study was performed on mixed surfactant systems containing polyoxometalate-headed amphiphiles (K₁₀[P₂W₁₇O₆₁OSi₂(C_nH_2n+1)₂], abbreviated as P₂W₁₇-2C_n, where n = 12, 14 or 16) and hexaethylene glycol monododecyl ether (C₁₂EO₆). Critical micelle concentrations (CMCs) of these mixtures were measured and used to calculate the interaction parameters based on regular solution theory, enabling prediction of micellar composition. Predictions were compared to micelle structures obtained from SANS. A phase diagram was also established.

FINDINGS

The CMCs of these mixtures suggest unusual unfavourable interactions between the two species, despite formation of mixed micelles. Micellar compositions obtained from SANS concurred with those calculated using the averaged interaction parameters for P₂W₁₇-2C_n/C₁₂EO₆ (n = 12 and 14). We attribute the unfavourable interactions to a combination of different phenomena: counterion-mediated interactions between P₂W₁₇ units and the unfolding of the ethylene oxide headgroups of the nonionic surfactant, yet micelles still form in these systems due to the hydrophobic interactions between surfactant tails.

Synthesis, Colloidal Characterization and Targetability of Phenylboronic Acid Functionalized α-Tocopheryl Polyethylene Glycol Succinate in Cancer Cells

This study reports targetable micelles developed after covalent functionalization of α-tocopheryl polyethylene glycol succinate (TPGS) with amino phenylboronic acid (APBA). Nuclear magnetic resonance (NMR) and infrared (IR) spectroscopic results showed successful attachment of APBA to the hydrophilic segment of TPGS. Dynamic light scattering and small-angle neutron scattering studies revealed that the conjugate self-assembled in water to produce spherical core-shell micelles (14–20 nm) which remained stable against temperature (ca. 25–45 °C) and pH changes. The micelles could solubilize a high payload of paclitaxel (PLX) without exhibiting changes in the average size. However, at the saturation solubility, drug molecules migrated from the core to the shell region and engaged with APBA groups via π–π stacking interaction. Confocal microscopy and cell sorting analyses verified the effective translocation ability of TPGS-APBA micelles in sialic acid (SA) expressing MDA-MB-453 cells. At equivalent PLX dose, TPGS-APBA micelles showed about a twofold improvement in apoptotic death among the cells exposed for 2 h. Our findings indicate that the attachment of APBA can be a potential strategy for improving the intra-cellular localization of carriers among cancer cells expressing SA residues.

Balancing Enzyme Encapsulation Efficiency and Stability in Complex Coacervate Core Micelles

Encapsulation of charged proteins into complex coacervate core micelles (C3Ms) can be accomplished by mixing them with oppositely charged diblock copolymers. However, these micelles tend to disintegrate at high ionic strength. Previous research showed that the addition of a homopolymer with the same charge sign as the protein improved the stability of protein-containing C3Ms. In this research, we used fluorescence correlation spectroscopy (FCS) and dynamic light scattering (DLS) to study how the addition of the homopolymer affects the encapsulation efficiency and salt stability of the micelles. We studied the encapsulation of laccase spore coat protein A (CotA), a multicopper oxidase, using a strong cationic-neutral diblock copolymer, poly(N-methyl-2-vinyl-pyridinium iodide)-block-poly(ethylene oxide) (PM2VP128-b-PEO477), and a negatively charged homopolymer, poly(4-styrenesulfonate) (PSS215). DLS indeed showed an improved stability of this three-component C3M system against the addition of salt compared to a two-component system. Remarkably, FCS showed that the release of CotA from a three-component C3M system occurred at a lower salt concentration and over a narrower concentration range than the dissociation of C3Ms. In conclusion, although the addition of the homopolymer to the system leads to micelles with a higher salt stability, CotA is excluded from the C3Ms already at lower ionic strengths because the homopolymer acts as a competitor of the enzyme for encapsulation.

Excess entropy and long-time diffusion in colloidal fluids with short-range interparticle attraction

Liquid structure and dynamics are experimentally investigated in colloidal suspensions with short-range depletion attraction. The colloidal fluid samples consist of hard-sphere colloidal particles suspended along with rodlike depletants based on surfactant micelles. The spheres have a range of surface chemistries, diameters, and packing fractions, and the rodlike micelle length depends on the temperature. Thus, the combination of hard-spheres and depletants generates a sample wherein short-range interparticle attraction can be temperature-tuned in situ. Video optical microscopy and particle tracking techniques are employed to measure particle trajectories from which structural and dynamical quantities are derived, including the particle pair correlation function [g(r)], mean square displacement, long-time diffusion coefficient, and the sample two-body excess entropy (S₂). The samples with stronger short-range attractions exhibit more order, as characterized by g(r) and S₂. The stronger short-range attractions are also observed to lead to slower long-time diffusion and more heterogeneous dynamics at intermediate time scales. Finally, the excess entropy scaling law prediction, i.e., the exponential relationship between two-body excess entropy and long-time diffusivity, is observed across the full range of samples.

Polarization induced control of optical trap potentials in binary liquids

We illustrate control of a polarized laser optical trapping potential landscape through the nonideal mixing of binary liquids. The inherent trapping potential asymmetry (ITPA) present in the trapping region results from the asymmetric intensity distribution in focal volume due to the high numerical aperture objective lens. Experimentally, we show that this ITPA effect can be modified and/or removed by the use of binary liquid mixtures. From our femtosecond optical tweezers experiments, we determine the topograph of the trapping potential base on the fluctuation-dissipation theorem. Additionally, the Brownian motion of the trapped bead is sensitive to the frictional force (FF) of the surroundings that is exerted by clusters of water and alcohol binary mixture through extended hydrogen bonding. Thus, using these two effects, ITPA and FF of the medium, we have shown that one can indeed modify the effective trapping potential landscape. Water-alcohol binary mixtures display a nonlinear dependence on the microrheological properties of the solvent composition as a result of rigid cluster formation. Volumetrically, at about 30% methanol in water binary mixture, the trapping asymmetry is minimal. In this particular binary mixture composition, the hydrophobic part of the methanol molecule is surrounded by ‘cages’ of water molecules. Enhanced H-bonding network of water molecules results in higher viscosity, which contributes to the higher frictional force. Increased viscosity decreases the degree of anisotropy due to hindered dipolar rotation. However, at higher methanol concentrations, the methanol molecules are no longer contained within the water cages and are free to move, which decrease their overall bulk viscosity. Thus, for pure solvents, experimentally measured anisotropy matches quite well with the theoretical prediction, but this fails in case of the binary mixtures due to the increased frictional force exerted by binary mixtures that result from the formation of cage-like structures.

Small Angle Scattering for Pharmaceutical Applications: From Drugs to Drug Delivery Systems

The sub-nanometer scale provided by small angle neutron and X-ray scattering is of special importance to pharmaceutical and biomedical investigators. As drug delivery devices become more functionalized and continue decreasing in size, the ability to elucidate details on size scales smaller than those available from optical techniques becomes extremely pertinent. Information gathered from small angle scattering therefore aids the endeavor of optimizing pharmaceutical efficacy at its most fundamental level. This chapter will provide some relevant examples of drug carrier technology and how small angle scattering (SAS) can be used to solve their mysteries. An emphasis on common first-step data treatments is provided which should help clarify the contents of scattering data to new researchers. Specific examples of pharmaceutically relevant research on novel systems and the role SAS plays in these studies will be discussed. This chapter provides an overview of the current applications of SAS in drug research and some practical considerations for selecting scattering techniques.

Bulk properties of aqueous graphene oxide and reduced graphene oxide with surfactants and polymers: adsorption and stability

Aqueous dispersions of graphene oxide and reduced graphene oxide are combined with carefully chosen surfactants and polymers to investigate adsorption and bulk properties in these systems.

Determination of equilibrium and rate constants for complex formation by fluorescence correlation spectroscopy supplemented by dynamic light scattering and Taylor dispersion analysis

The equilibrium and rate constants of molecular complex formation are of great interest both in the field of chemistry and biology. Here, we use fluorescence correlation spectroscopy (FCS), supplemented by dynamic light scattering (DLS) and Taylor dispersion analysis (TDA), to study the complex formation in model systems of dye-micelle interactions. In our case, dyes rhodamine 110 and ATTO-488 interact with three differently charged surfactant micelles: octaethylene glycol monododecyl ether C₁₂E₈ (neutral), cetyltrimethylammonium chloride CTAC (positive) and sodium dodecyl sulfate SDS (negative). To determine the rate constants for the dye-micelle complex formation we fit the experimental data obtained by FCS with a new form of the autocorrelation function, derived in the accompanying paper. Our results show that the association rate constants for the model systems are roughly two orders of magnitude smaller than those in the case of the diffusion-controlled limit. Because the complex stability is determined by the dissociation rate constant, a two-step reaction mechanism, including the diffusion-controlled and reaction-controlled rates, is used to explain the dye-micelle interaction. In the limit of fast reaction, we apply FCS to determine the equilibrium constant from the effective diffusion coefficient of the fluorescent components. Depending on the value of the equilibrium constant, we distinguish three types of interaction in the studied systems: weak, intermediate and strong. The values of the equilibrium constant obtained from the FCS and TDA experiments are very close to each other, which supports the theoretical model used to interpret the FCS data.

Dielectric Analysis for the Spherical and Rodlike Micelle Aggregates Formed from a Gemini Surfactant: Driving Forces of Micellization and Stability of Micelles

The self-aggregation behavior of Gemini surfactant 12-2-12 (ethanediyl-1,2-bis(dimethyldodecylammonium bromide)) in water was investigated by dielectric relaxation spectroscopy (DRS) over a frequency range from 40 Hz to 110 MHz. Dielectric determination shows that well-defined spherical micelles formed when the concentration of the surfactant was above a critical micelle concentration CMC1 of 3 mM and rodlike micelles formed above CMC2, 16 mM. The formation mechanism of the spherical micelles and their transition mechanism to clubbed micelles were proposed by calculating the degree of counterion binding of the micelles. The interactions between the head groups and the hydrophobic chains of the surfactant led to the formation of the micelles, whereas the transition is mainly attributed to the interaction among the hydrophobic chains. By analyzing the dielectric relaxation observed at about 10(7) Hz based on the interface polarization theory, the permittivity and conductivity of micelle aggregates (spherical and clubbed) and volume fraction of micelles were calculated theoretically as well as the electrical properties of the solution medium. Furthermore, we also calculated the electrokinetic parameters of the micelle particle surface, surface conductivity, surface charge density, and zeta potential, using the relaxation parameters and phase parameters. On the basis of these results, the balance of forces controlling morphological transitions, interfacial electrokinetic properties, and the stability of the micelle aggregates was discussed.

Tunable depletion potentials driven by shape variation of surfactant micelles

Depletion interaction potentials between micron-sized colloidal particles are induced by nanometer-scale surfactant micelles composed of hexaethylene glycol monododecyl ether (C_{12}E_{6}), and they are measured by video microscopy. The strength and range of the depletion interaction is revealed to arise from variations in shape anisotropy of the surfactant micelles. This shape anisotropy increases with increasing sample temperature. By fitting the colloidal interaction potentials to theoretical models, we extract micelle length and shape anisotropy as a function of temperature. This work introduces shape anisotropy tuning as a means to control interparticle interactions in colloidal suspensions, and it shows how the interparticle depletion potentials of micron-scale objects can be employed to probe the shape and size of surrounding macromolecules at the nanoscale.

Fluorescent liquid pyrene derivative-in-water microemulsions

Using a liquid pyrene derivative as the oil, stable oil-in-water microemuslions are prepared, with tunable fluorescence emission via droplet size.

Size of Submicrometer Particles Measured by FCS: Correction of the Confocal Volume

When fluorescence correlation spectroscopy (FCS) in combination with a confocal microscope is used to determine the hydrodynamic radius a of particles comparable to or larger than the linear size σ of the confocal volume of the microscope, a correction must be used that depends on the a(2)/σ(2) ratio and the distribution of the dye within the particle. Here we present the experimental validation of the theoretically predicted approximate correction necessary for appropriate measurements of the size of uniformly fluorescently labeled spheres of radius comparable to the size of the confocal volume. We also test the approximate correction formula for different ranges of the a/σ ratio and propose a simple procedure to obtain the correct nanoparticle size from such a measurement.

Polymer films removed from solid surfaces by nanostructured fluids: microscopic mechanism and implications for the conservation of cultural heritage

Complex fluids based on amphiphilic formulations are emerging, particularly in the field of conservation of works of art, as effective and safe liquid media for the removal of hydrophobic polymeric coatings. The comprehension of the cleaning mechanism is key to designing tailored fluids for this purpose. However, the interaction between nanostructured fluids and hydrophobic polymer films is still poorly understood. In this study, we show how the combination of confocal laser scanning microscopy (CLSM) and atomic force microscopy (AFM) provides interesting and complementary insight into this process. We focused on the interaction between an ethyl methacrylate/methyl acrylate 70:30 copolymer film deposited onto a glass surface and a water/nonionic surfactant/2-butanone (MEK) ternary system, with MEK being a good solvent and water being a nonsolvent for the polymer. Our results indicate a synergy between the organic solvent and the surfactant assemblies: MEK rapidly swells the outer layers of the polymer film allowing for the subsequent diffusion of solvent molecules, while the amphiphile decreases the interfacial energy between the polymeric coating and the liquid phase, favoring dewetting and dispersion of swollen polymer droplets in the aqueous phase. The chemical nature of the surfactant and the microstructure of the assemblies determine both the kinetics and the overall efficiency of polymer removal, as assessed by comparing the behavior of similar formulations containing an anionic surfactant (sodium dodecyl sulfate, SDS).

Nanostructured fluids from degradable nonionic surfactants for the cleaning of works of art from polymer contaminants

Nanostructured fluids containing anionic surfactants are among the best performing systems for the cleaning of works of art. Though efficient, their application may result in the formation of a precipitate, due to the combination with divalent cations that might leach out from the artifact. We propose here two new aqueous formulations based on nonionic surfactants, which are non-toxic, readily biodegradable and insensitive to the presence of divalent ions. The cleaning properties of water-nonionic surfactant-2-butanone (MEK) were assessed both on model surfaces and on a XIII century fresco that could not be cleaned using conventional methods. Structural information on nanofluids has been gathered by means of small-angle neutron scattering, dynamic light scattering and nuclear magnetic resonance with diffusion monitoring. Beside the above-mentioned advantages, these formulations turned out to be considerably more efficient in the removal of polymer coatings than those based on anionic surfactants. Our results indicate that the cleaning process most likely consists of two steps: initially, the polymer film is swollen by the MEK dissolved in the continuous domain of the nanofluid; in the second stage, surfactant aggregates come into play by promoting the removal of the polymer film with a detergency-like mechanism. The efficiency can be tuned by the composition and nature of amphiphiles and is promoted by working as close as possible to the cloud point of the formulation, where the second step proceeds at maximum rate.

Micelle structure and molecular self-diffusion in isononylphenol ethoxylate-water systems

The structure and dynamic properties of micellar solutions of nonionic surfactants of a series of isononylphenol ethoxylates, C9H19C6H4O(C2H4O)(n)H (where n = 6,8,9,10, and 12), were studied by NMR diffusometry, dynamic light scattering, and viscosimetry. The sizes of the micelles were determined for different surfactants and at different surfactant concentrations. The numbers of water molecules bound by a micelle and by one oxyethylene group of the surfactant were estimated.

Hydrodynamic modelling of protein conformation in solution: ELLIPS and HYDRO

The last three decades has seen some important advances in our ability to represent the conformation of proteins in solution on the basis of hydrodynamic measurements. Advances in theoretical modeling capabilities have been matched by commensurate advances in the precision of hydrodynamic measurements. We consider the advances in whole-body (simple ellipsoid-based) modeling—still useful for providing an overall idea of molecular shape, particularly for those systems where only a limited amount of data is available—and outline the ELLIPS suite of algorithms which facilitates the use of this approach. We then focus on bead modeling strategies, particularly the surface or shell–bead approaches and the HYDRO suite of algorithms. We demonstrate how these are providing great insights into complex issues such as the conformation of immunoglobulins and other multi-domain complexes.

Formation of nanostructured silica materials templated with nonionic fluorinated surfactant followed by in situ SAXS

The formation of two-dimensional (2D)-hexagonal (p6m) silica-based hybrid materials from concentrated micellar solutions (10 wt %) of two nonionic fluorinated surfactants, R(7)(F)(EO)(8) and R(8)(F)(EO)(9), is investigated in situ using synchrotron time-resolved small angle X-ray scattering (SAXS). The two surfactants form direct micelles with different structures prior to the silica precursor addition as demonstrated by SAXS and SANS. R(8)(F)(EO)(9) gives spherical micelles and R(7)(F)(EO)(8) more complex ones, modeled here as short wormlike micelles. The in situ SAXS experiments reveal that both surfactants form well-ordered 2D-hexagonal hybrid materials after the addition of the silica precursor, in coexistence with an excess of surfactant micelles. The structures of both 2D-hexagonal phases are compared just after precipitation, and it is found that more robust and larger silica walls are formed for R(8)(F)(EO)(9) than for R(7)(F)(EO)(8). This could explain why only the material obtained with R(8)(F)(EO)(9) is stable upon washing, as observed previously. Moreover, it is proposed that in both cases, only a part of the micelles interact with the silica oligomers and undergo structural modifications before forming the 2D-hexagonal mesophase. The obtained results are finally discussed in the more general framework of the templating mechanism for nonionic surfactants.

Sucrose monoester micelles size determined by Fluorescence Correlation Spectroscopy (FCS)

One of the several uses of sucrose detergents, as well as other micelle forming detergents, is the solubilization of different membrane proteins. Accurate knowledge of the micelle properties, including size and shape, are needed to optimize the surfactant conditions for protein purification and membrane characterization. We synthesized sucrose esters having different numbers of methylene subunits on the substituent to correlate the number of methylene groups with the size of the corresponding micelles. We used Fluorescence Correlation Spectroscopy (FCS) and two photon excitation to determine the translational D of the micelles and calculate their corresponding hydrodynamic radius, R_h. As a fluorescent probe we used LAURDAN (6-dodecanoyl-2-dimethylaminonaphthalene), a dye highly fluorescent when integrated in the micelle and non-fluorescent in aqueous media. We found a linear correlation between the size of the tail and the hydrodynamic radius of the micelle for the series of detergents measured.

Comparative analysis of viscosity of complex liquids and cytoplasm of mammalian cells at the nanoscale

We present a scaling formula for size-dependent viscosity coefficients for proteins, polymers, and fluorescent dyes diffusing in complex liquids. The formula was used to analyze the mobilities of probes of different sizes in HeLa and Swiss 3T3 mammalian cells. This analysis unveils in the cytoplasm two length scales: (i) the correlation length ξ (approximately 5 nm in HeLa and 7 nm in Swiss 3T3 cells) and (ii) the limiting length scale that marks the crossover between nano- and macroscale viscosity (approximately 86 nm in HeLa and 30 nm in Swiss 3T3 cells). During motion, probes smaller than ξ experienced matrix viscosity: η(matrix) ≈ 2.0 mPa·s for HeLa and 0.88 mPa·s for Swiss 3T3 cells. Probes much larger than the limiting length scale experienced macroscopic viscosity, η(macro) ≈ 4.4 × 10(-2) and 2.4 × 10(-2) Pa·s for HeLa and Swiss 3T3 cells, respectively. Our results are persistent for the lengths scales from 0.14 nm to a few hundred nanometers.