Trends in the adsorption of volatile organic compounds in a large-pore metal-organic framework, IRMOF-1

Effect of Ligand Aromaticity on Cyclohexane and Benzene Sorption in IRMOFs: A Computational Study

A series of four isoreticular MOFs (IRMOF-1, -10, -14, and -16) were selected for a computational investigation of the effect of ligand aromaticity on the adsorption capacity of an aromatic VOC (benzene) compared to its nonaromatic analog (cyclohexane). The affinity of the adsorbates was evaluated by calculating Henry's constants and adsorption enthalpies. It has been evidenced that while KH values decrease with ligand elongation (IRMOF-10 and -16), inserting a pyrene core into the MOF structure (IRMOF-14) increases both the cyclohexane and benzene adsorption efficiency by ∼290 and 54%, respectively. To elucidate host-guest interactions, we sought to locate preferential adsorption sites in MOF structures for the two VOCs studied by using the GCMC method. It appears that benzene interacts with the metal center (Zn4O clusters) and most of the ligand while cyclohexane tends to localize preferentially only near the Zn4O clusters. Coadsorption isotherms (equimolar mixture of benzene and cyclohexane) demonstrated the preferential adsorption of cyclohexane due to the stronger affinity for the MOF structure. On the other hand, for other isoreticular structures, the ligand elongation leads to a shift of the adsorption curve of cyclohexane caused by pore size increase and therefore less interactions with the walls. This phenomenon is counterbalanced in the case of IRMOF-14 due to stronger interactions between the cyclohexane and pyrene groups. The present results thus open perspectives in the design of promising MOF candidates for high-performing separation and sorption/detection of hydrocarbon VOCs.

A promising sensing platform for explosive markers: Zeolite-like metal-organic framework based monolithic composite as a case study

Preconcentration for on-site detection or subsequent determination is a promising technique for selective sensing explosive markers at low concentrations. Here, we report divinylbenzene monolithic polymer in its blank form (neat-DVB) and as a composite incorporated with sodalite topology zeolite-like metal-organic frameworks (3-ZMOF@DVB), as a sensitive, selective, and cost-effective porous preconcentrator for aliphatic nitroalkanes in the vapor phase as explosive markers at infinite dilution. The developed materials were fabricated as 18 cm gas chromatography (GC) monolithic capillary columns to study their separation performance of nitroalkane mixture and the subsequent physicochemical study of adsorption using the inverse gas chromatography (IGC) technique. A strong preconcentration effect was indicated by a specific retention volume adsorption/desorption ratio equal to 3 for nitromethane on the neat-DVB monolith host-guest interaction, and a 14% higher ratio was observed using the 3-ZMOF@DVB monolithic composite despite the low percentage of 0.7 wt.% of sod-ZMOF added. Furthermore, Incorporating ZMOF resulted in a higher percentage of micropores, increasing the degree of freedom more than bringing stronger adsorption and entropic-driven interaction more than enthalpic. The specific free energy of adsorption (ΔGS) values increased for polar probes and nitroalkanes, denoting that adding ZMOFs earned the DVB monolithic matrix a more specific character. Afterward, Lewis acid-base properties were calculated, estimating the electron acceptor (KA) and electron donor (KB) constants. The neat-DVB was found to have a Lewis basic character with KB/KA = 7.71, and the 3-ZMOF@DVB had a less Lewis basic character with KB/KA = 3.82. An increased electron-accepting nature can be directly related to incorporating sod-ZMOF into the DVB monolithic matrix. This work considers the initial step in presenting a portable explosives detector or preconcentrating explosive markers trace prior to more sophisticated analysis. Additionally, the IGC technique allows for understanding the factors that led to the superior adsorption of nitroalkanes for the developed materials.

Adsorption and Degradation of Volatile Organic Compounds by Metal-Organic Frameworks (MOFs): A Review

Volatile organic compounds (VOCs) are a major threat to human life and health. The technologies currently used to remove VOCs mainly include adsorption and photocatalysis. Adsorption is the most straightforward strategy, but it cannot ultimately eliminate VOCs. Due to the limited binding surface, the formaldehyde adsorption on conventional photocatalysts is limited, and the photocatalytic degradation efficiency is not high enough. By developing novel metal-organic framework (MOF) materials that can catalytically degrade VOCs at room temperature, the organic combination of new MOF materials and traditional purification equipment can be achieved to optimize adsorption and degradation performance. In the present review, based on the research on the adsorption and removal of VOCs by MOF materials in the past 10 years, starting from the structure and characteristics of MOFs, the classification of which was described in detail, the influencing factors and mechanisms in the process of adsorption and removal of VOCs were summarized. In addition, the research progress of MOF materials was summarized, and its future development in this field was prospected.

Experimental and Simulation Studies of the Adsorption of Methylbenzene by Fe(III)-Doped NU-1000 (Zr)

Metal-organic framework (MOF) materials, NU-1000(Zr) and Fe(III)-doped NU-1000(Zr), were prepared through the hydrothermal method and used to remove methylbenzene in this work. The pore structure, crystal structure, adsorption capacity, adsorption heat, and adsorption density of Fe(III)-doped NU-1000(Zr) were analyzed based on the experimental and Giant Canonical Monte Carlo (GCMC) simulation methods. The results show that Fe³⁺ has a uniform distribution and a stable structure after NU-1000(Zr) was modified with Fe³⁺. The adsorption-penetration experiments of NU-1000 doped with different concentrations of Fe³⁺ have shown that the adsorption capacity of methylbenzene on the material surface is up to 231 mg g^-1 at Fe/Zr = 0.1, which is due to the less doping of Fe elements and more defective sites in the structure. The GCMC simulation shows that NU-1000(Zr) and Fe(III)-NU-1000(Zr) adsorbed methylbenzene through π-π interaction, and the adsorption effect is good and close to the experimental result. The conclusions of this paper provide important support for the modification of MOF materials and the removal of methylbenzene.

Synthesis of Silanol-Rich MCM-48 with Mixed Surfactants and Their Application in Acetone Adsorption: Equilibrium, Kinetic, and Thermodynamic Studies

Mesoporous silica MCM-48 with rich silanol was prepared using polyvinylpyrrolidone (PVP) and cetyltrimethylammonium bromide (CTAB) as mixed templates, and the dynamic adsorption performance of acetone was evaluated by testing breakthrough curves. The mixed micelle formed by CTAB and PVP, as well as the hydrogen bond between the carbonyl group of PVP and silanol group affected the condensation process of Si-OH group during the formation of mesoporous structure, resulting in the increase of Si-OH group number on the surface of MCM-48. Compared with MCM-48 synthesized by single template (CTAB), the acetone adsorption capacity of MCM-48 (1:3) synthesized by mixed templates (PVP:CTAB = 1:3) improved by 23.86%, which was attributed to the increase of silanol group amount and the decrease of pore size. In addition, Bangham model had the highest goodness of fit to describe the adsorption process among four kinetic models for the adsorbents, conforming to the mechanism of pore diffusion. The Langmuir and Freundlich models were used to fit the adsorption isotherm data, and the Freundlich model could better describe the adsorption of acetone. Freundlich model fitting results showed that MCM-48 with rich silanol had a strong affinity for acetone, and the adsorption of acetone on MCM-48 belonged to multilayer adsorption. The thermodynamic results showed that the adsorption of MCM-48 for acetone was physical adsorption, and the adsorption behavior was exothermic. This work provided insight into how the inherent properties of an adsorbent and environmental factors (including initial concentration and adsorption temperature) affected the adsorption performance of ketones, thus more ideas could be provided for the accurate design of adsorbents. Furthermore, silanol-rich MCM-48 synthesized by mixed templates is expected to be a promising adsorbent for acetone removal.

A critical review on VOCs adsorption by different porous materials: Species, mechanisms and modification methods

Volatile organic compounds (VOCs) have attracted world-wide attention regarding their serious hazards on ecological environment and human health. Industrial processes such as fossil fuel combustion, petrochemicals, painting, coatings, pesticides, plastics, contributed to the large proportion of anthropogenic VOCs emission. Destructive methods (catalysis oxidation and biofiltration) and recovery methods (absorption, adsorption, condensation and membrane separation) have been developed for VOCs removal. Adsorption is established as one of the most promising strategies for VOCs abatement thanks to its characteristics of cost-effectiveness, simplicity and low energy consumption. The prominent progress in VOCs adsorption by different kinds of porous materials (such as carbon-based materials, oxygen-contained materials, organic polymers and composites is carefully summarized in this work, concerning the mechanism of adsorbate-adsorbent interactions, modification methods for the mentioned porous materials, and enhancement of VOCs adsorption capacity. This overview is to provide a comprehensive understanding of VOCs adsorption mechanisms and up-to-date progress of modification technologies for different porous materials.

A lanthanide metal–organic framework (MOF-76) for adsorbing dyes and fluorescence detecting aromatic pollutants

A series of nano-sized luminescent lanthanide metal–organic frameworks (Ln-MOFs) are developed for application in dye adsorption and fluorescence sensing for monoaromatic hydrocarbons (BTEX).

Multifunctional metal-organic frameworks: from academia to industrial applications

After three decades of intense and fundamental research on metal-organic frameworks (MOFs), is there anything left to say or to explain? The synthesis and properties of MOFs have already been comprehensively described elsewhere. It is time, however, to prove the nature of their true usability: technological applications based on these extended materials require development and implementation as a natural consequence of the up-to-known intensive research focused on their design and preparation. The current large number of reviews on MOFs emphasizes practical strategies to develop novel networks with varied crystal size, shape and topology, being mainly devoted to academic concerns. The present survey intends to push the boundaries and summarise the state-of-the-art on the preparation of promising (multi)functional MOFs in worldwide laboratories and their use as materials for industrial implementation. This review starts, on the one hand, to describe several tools and striking examples of remarkable and recent (multi)functional MOFs exhibiting outstanding properties (e.g., in gas adsorption and separation, selective sorption of harmful compounds, heterogeneous catalysis, luminescent and corrosion protectants). On the other hand, and in a second part, it intends to use these examples of MOFs to incite scientists to move towards the transference of knowledge from the laboratories to the industry. Within this context, we exhaustively review the many efforts of several worldwide commercial companies to bring functional MOFs towards the daily use, analysing the various patents and applications reported to date. Overall, this review goes from the very basic concepts of functional MOF engineering and preparation ending up in their industrial production on a large scale and direct applications in society.

DFT-Derived Force Fields for Modeling Hydrocarbon Adsorption in MIL-47(V)

Generic force fields such as UFF and DREIDING are widely used for predicting molecular adsorption and diffusion in metal-organic frameworks (MOFs), but the accuracy of these force fields is unclear. We describe a general framework for developing transferable force fields for modeling the adsorption of alkanes in a nonflexible MIL-47(V) MOF using periodic density functional theory (DFT) calculations. By calculating the interaction energies for a large number of energetically favorable adsorbate configurations using DFT, we obtain a force field that gives good predictions of adsorption isotherms, heats of adsorption, and diffusion properties for a wide range of alkanes and alkenes in MIL-47(V). The force field is shown to be transferable to related materials such as MIL-53(Cr) and is used to calculate the free-energy differences for the experimentally observed phases of MIL-53(Fe).

A surface second harmonic generation investigation of volatile organic compound adsorption on a liquid mercury surface

Adsorption of benzene and toluene vapor on a liquid mercury surface, as probed by SHG spectroscopy, exhibit a non-Langmuirian behavior with lateral interaction being a major component of the adsorption mechanism.

Porous anionic indium-organic framework with enhanced gas and vapor adsorption and separation ability

A three-dimensional microporous anionic metal-organic framework (MOF) (Et4N)3[In3(TATB)4] (FJI-C1, H3TATB=4,4',4''-s-triazine-2,4,6-triyltribenzoic acid) with large unit cell volume has been synthesized. Assisted by the organic cation group Et4N in the pores of the compound, FJI-C1 not only shows high adsorption uptakes of C2 and C3 hydrocarbons, but also exhibits highly selective separation of propane, acetylene, ethane, and ethylene from methane at room temperature. Furthermore, it also exhibits high separation selectivity for propane over C2 hydrocarbons and acetylene can be readily separated from their C2 hydrocarbons mixtures at low pressure due to the high selectivity for C2H2 in comparison to C2H4 and C2H6. In addition, FJI-C1 with hydrophilic internal pores surfaces shows highly efficient adsorption separation of polar molecules from nonpolar molecules. Notably, it exhibits high separation selectivity for benzene over cyclohexane due to the π-π interactions between benzene molecules and s-triazine rings of the porous MOF.

Three-dimensional visualization of defects formed during the synthesis of metal-organic frameworks: a fluorescence microscopy study

Imperfections in the spotlight: fluorescence microscopy was used to detect defects in metal-organic frameworks formed during synthesis. In contrast to currently available techniques, confocal fluorescence microscopy offers the advantage of three-dimensional imaging at the single-crystal level combined with the sensitivity required to study the start of defect formation.

Probing the adsorption characteristic of metal-organic framework MIL-101 for volatile organic compounds by quartz crystal microbalance

As volatile organic compounds (VOCs) are a major group of air pollutants, development of materials for efficient adsorption and removal of VOCs is of great significance in both environmental and analytical sciences. Here we report metal-organic frameworks (MOFs) MIL-101 for the effective adsorption of VOCs at atmospheric pressure. A simple device was designed for quartz crystal microbalance (QCM), and six VOCs with various functional groups and polarities, i.e., n-hexane, toluene, methanol, butanone, dichloromethane, and n-butylamine, were chosen as targets to probe the adsorption properties of MIL-101. The developed device allows measurement of the adsorption isotherms and monitoring of the dynamic process for the adsorption of VOCs on MOFs, and also provides a useful tool for characterization of MOFs. The adsorption isotherms of the VOCs on MIL-101 followed the Dubinin-Astakhov equation with the characteristic energy from 5.70 (methanol) to 9.13 kJ mol(-1) (n-butylamine), Astakhov exponent from 0.50 (n-butylamine) to 3.03 (n-hexane), and the limiting adsorption capacity from 0.08 (n-hexane) to 12.8 (n-butylamine) mmol g(-1). MIL-101 exhibited the strongest affinity to n-butylamine, but the weakest affinity to n-hexane. The determined Astakhov exponents and the isosteric heats of adsorption revealed the energetic heterogeneity of MIL-101. MIL-101 showed the most energetically homogeneous for n-hexane, but the most energetically heterogeneous for n-butylamine. The dynamic process of adsorption monitored by the QCM system demonstrated the distribution of the sorption sites within MIL-101. The metal sites within the MIL-101 were vital in adsorption process. MIL-101 gave much higher affinity and bigger adsorption capacity to VOCs than activated carbon, offering great potential for real applications in the adsorption and removal of VOCs.

Effects of molecular sieving and electrostatic enhancement in the adsorption of organic compounds on the zeolitic imidazolate framework ZIF-8

In this work, the adsorption behavior of a range of organic vapors and gases on the zeolitic imidazolate framework, ZIF-8, is investigated using an inverse gas chromatography (IGC) methodology at the zero-coverage limit and elevated temperatures. The measured thermodynamic values and surface energies for the adsorption of n-alkanes on ZIF-8 are found to be reduced from those previously reported for IRMOF-1. This reduction is most likely an effect of the predominately organic accessible surface of ZIF-8 and the resulting weaker interactions in comparison to IRMOF-1. The pore aperture size of ZIF-8, which is significantly reduced from that of IRMOF-1, is seen to introduce molecular sieving effects for branched alkanes, aromatics, and heavily halogenated compounds. Deformation polarizabilities of the adsorbates were used to calculate the specific adsorption free energy, and it is determined that the specific effects account for around 1-5 kJ/mol, or between 10% and 70% of the total free energy of adsorption for the sorbates studied (at 250 °C). The importance of electrostatic forces was seen in the significantly enhanced adsorption of propylene and ethylene in comparison to their respective alkanes and in the direct correlation shown between the specific components of the free energy of adsorption and the adsorbate's dipole moment.