Changes of the molecular structure in polyelectrolyte multilayers under stress

Photo-and Heat-Induced Dismantlable Adhesion Interfaces Prepared by Layer-by-Layer Deposition

The development of a dismantlable adhesion technology that allows switching between bonding and debonding states using external stimuli is important for realizing renewable and sustainable material cycles. Controlling the adhesion interface is an effective approach to manipulate the adhesion strength; however, research on dismantlable systems focusing on the interface has not been proceeded. Recently, we demonstrated a novel dismantlable system based on a stimuli-responsive molecular layer comprising cleavable anthracene dimers, which strengthen the initial adhesive force by forming chemical bonds between the substrate and adhesive and can be dismantled when required via stimulation-induced bond breaking. Here, we evaluate the use of the anthracene-based molecular layer with different components for verifying its versatility in the adhesive/dismantling system. The formation of the cleavable molecular layer by the stacking of relevant molecules enabled its usage with two types of adhesives, an epoxy adhesive and a silane-modified polymer adhesive. The initial adhesive strengths were improved in both types of molecular layers by creating chemical bonds at the adhesion interfaces. Light irradiation or heating stimuli for 1 min reduced the peel strength by up to 65%, and dismantling occurred in the cleavable photodimer layer. This study expands the versatile applicability of the molecular layer-based dismantling system.

Highly stretchable ionically crosslinked acrylate elastomers inspired by polyelectrolyte complexes

Dynamic bonds are a powerful approach to tailor the mechanical properties of elastomers and introduce shape-memory, self-healing, and recyclability. Among the library of dynamic crosslinks, electrostatic interactions among oppositely charged ions have been shown to enable tough and resilient elastomers and hydrogels. In this work, we investigate the mechanical properties of ionically crosslinked ethyl acrylate-based elastomers assembled from oppositely charged copolymers. Using both infrared and Raman spectroscopy, we confirm that ionic interactions are established among polymer chains. We find that the glass transition temperature of the complex is in between the two individual copolymers, while the complex demonstrates higher stiffness and more recovery, indicating that ionic bonds can strengthen and enhance recovery of these elastomers. We compare cycles to increasing strain levels at different strain rates, and hypothesize that at fast strain rates ionic bonds dynamically break and reform while entanglements do not have time to slip, and at slow strain rates ionic interactions are disrupted and these entanglements slip significantly. Further, we show that a higher ionic to neutral monomer ratio can increase the stiffness, but its effect on recovery is minimal. Finally, taking advantage of the versatility of acrylates, ethyl acrylate is replaced with the more hydrophilic 2-hydroxyethyl acrylate, and the latter is shown to exhibit better recovery and self-healing at a cost of stiffness and strength. The design principles uncovered for these easy-to-manufacture polyelectrolyte complex-inspired bulk materials can be broadly applied to tailor elastomer stiffness, strength, inelastic recovery, and self-healing for various applications.

Assessment of Layer-By-Layer Modified Nanofiltration Membrane Stability in Phosphoric Acid

Nanofiltration (NF) can enable P recovery from waste streams via retaining multivalent impurities from spent pickling acid. However, with the currently available membranes, an economically feasible process is impossible. Layer-by-layer modified NF membranes are a promising solution for the recovery of P from acidic leachate. LbL membranes show a high level of versatility in terms of fine tuning for ion retention, which is necessary to achieve sufficient phosphorus yields. However, the stability of layer-by-layer modified membranes during phosphoric acid (H₃PO₄) filtration needs to be further investigated. In our study, we show that a polyethersulfone hollow fiber membrane modified with four or eight bi-layers was stable during immersing and filtering of a 15% H₃PO₄ solution. A sulfonated polyethersulfone (sPES)-based hollow fiber LbL membrane was only stable during filtration. Thus, we show the importance of applying real process conditions to evaluate membranes. Another important aspect is the influence of the high ionic strength of the feed solution on the membrane. We show that a high ionic strength led to a decrease in Mg retention, which could be increased to 85% by adjusting the process parameters.

Elastic to Plastic Deformation in Uniaxially Stressed Polylelectrolyte Multilayer Films

Polyelectrolyte multilayer (PEM) are thin polymeric films produced by alternating adsorption of positively and negatively charged polyelectrolytes (PE) on a substrate. These films are considered drug delivery agents as well as coating material for implants, due to their antibiofouling and biologically benign properties. For these reasons the film mechanical properties as well as response to mechanical stress are important measurement parameters. Especially intriguing is the correlation of the mechanical properties of PEM on macroscopic level with the structure of PEM on molecular level, which is addressed here for the first time. This study investigates PEM from PDADMA/PSS produced by spraying technique with neutron and X-ray reflectometry. Reflectometry technique provides precise information on thickness and density (i.e., electron density or scattering length density, respectively), and, this way, allows to conclude on changes in film composition. Thus, neutron and X-ray reflectometry technique is suitable to investigate the overall and the internal transformations, which PEM films might undergo upon exposure to mechanical load. During uniaxial elongation two regimes of PEM-deformation can be observed: An elastic regime at small elongations (below ca. 0.2%), which is characterized by a reversible change of film thickness, and a plastic regime with a permanent change above this limit. Both regimes have in common, that the mechanical load induces an increase of the film thickness, which is accompanied by an uptake of water from the surrounding atmosphere. The strain causes a molecular rearrangement within the PEM-structure of stratified layers, which, even in elastic regime, is permanent, although the thickness change remains reversible.

Tunable Interfacial Properties in Silk Ionomer Microcapsules with Tailored Multilayer Interactions

Microencapsulation techniques represent a critical step in realizing highly controlled transport of functional materials in multiphase systems. The first demonstration of microcapsules prepared from minimally grafted silk ionomers (silk fibroin modified with cationic/anionic charge groups) are presented here. These tailored biomacromolecules have shown significantly increased biocompatibility over traditional polyelectrolytes and heavily grafted silk ionomers, but the low grafting density had previously limited attempts to fabricate stable microcapsules. In addition, the first microcapsules from polyethylene-glycol-grafted silk ionomers are fabricated and the corresponding impact on microcapsule behavior is demonstrated. The materials are shown to exhibit pH-responsive properties, with the microcapsules demonstrating an approx. tenfold decrease in stiffness and an approx. threefold change in diffusion coefficient when moving from acidic to basic buffer. Finally, the effect of assembly conditions of the microcapsules are shown to play a large role in determining final properties, with microcapsules prepared in acidic buffers showing lower roughness, stiffness, and an inversion in transport behavior (i.e., permeability decreases at higher pH).

Polylactic Acid Sealed Polyelectrolyte Multilayer Microchambers for Entrapment of Salts and Small Hydrophilic Molecules Precipitates

Efficient depot systems for entrapment and storage of small water-soluble molecules are of high demand for wide variety of applications ranging from implant based drug delivery in medicine and catalysis in chemical processes to anticorrosive systems in industry where surface-mediated active component delivery is required on a time and site specific manner. This work reports the fabrication of individually sealed hollow-structured polyelectrolyte multilayer (PEM) microchamber arrays based on layer-by-layer self-assembly as scaffolds and microcontact printing. These PEM chambers are composed out of biocompatible polyelectrolytes and sealed by a monolayer of hydrophobic biocompatible and biodegradable polylactic acid (PLA). Coating the chambers with hydrophobic PLA allows for entrapment of a microair-bubble in each chamber that seals and hence drastically reduces the PEM permeability. PLA@PEM microchambers are proven to enable prolonged subaqueous storage of small hydrophilic salts and molecules such as crystalline NaCl, doxicycline, and fluorescent dye rhodamine B. The presented microchambers are able to entrap air bubbles and demonstrate a novel strategy for entrapment, storage, and protection of micropackaged water-soluble substances in precipitated form. These chambers allow triggered release as demonstrated by ultrasound responsiveness of the chambers. Low-frequency ultrasound exposure is utilized for microchamber opening and payload release.

Nanomechanical Behavior of High Gas Barrier Multilayer Thin Films

Nanoindentation and nanoscratch experiments were performed on thin multilayer films manufactured using the layer-by-layer (LbL) assembly technique. These films are known to exhibit high gas barrier, but little is known about their durability, which is an important feature for various packaging applications (e.g., food and electronics). Films were prepared from bilayer and quadlayer sequences, with varying thickness and composition. In an effort to evaluate multilayer thin film surface and mechanical properties, and their resistance to failure and wear, a comprehensive range of experiments were conducted: low and high load indentation, low and high load scratch. Some of the thin films were found to have exceptional mechanical behavior and exhibit excellent scratch resistance. Specifically, nanobrick wall structures, comprising montmorillonite (MMT) clay and polyethylenimine (PEI) bilayers, are the most durable coatings. PEI/MMT films exhibit high hardness, large elastic modulus, high elastic recovery, low friction, low scratch depth, and a smooth surface. When combined with the low oxygen permeability and high optical transmission of these thin films, these excellent mechanical properties make them good candidates for hard coating surface-sensitive substrates, where polymers are required to sustain long-term surface aesthetics and quality.

A new biomimetic route to engineer enzymatically active mechano-responsive materials

Using modified β-galactosidase covalently linked to cross-linked polyelectrolyte multilayers (PEM), catalytically active materials have been designed. Their enzymatic activity can be modulated, partially in a reversible way, simply by stretching. This strategy, based on enzyme conformational changes, constitutes a new tool for the development of biocatalytic mechano-responsive materials.

Photocontrolled adsorption of polyelectrolyte molecules on a silicon substrate

We report on a change in the properties of monomolecular films of polyelectrolyte molecules, induced by illuminating the silicon substrate on which they adsorb. It was found that under illumination the thickness of the adsorbed layer decreases by at least 27% and at the same time the roughness is significantly reduced in comparison to a layer adsorbed without irradiation. Furthermore, the homogeneity of the film topography and the surface potential is shown to be improved by illumination. The effect is explained by a change in surface charge density under irradiation of n- and p-type silicon wafers. The altered charge density in turn induces conformational changes of the adsorbing polyelectrolyte molecules. Their photocontrolled adsorption opens new possibilities for selective manipulation of adsorbed films. This possibility is of potential importance for many applications such as the production of well-defined coatings in biosensors or microelectronics.

Cyto-mechanoresponsive polyelectrolyte multilayer films

Cell adhesion processes take place through mechanotransduction mechanisms where stretching of proteins results in biological responses. In this work, we present the first cyto-mechanoresponsive surface that mimics such behavior by becoming cell-adhesive through exhibition of arginine-glycine-aspartic acid (RGD) adhesion peptides under stretching. This mechanoresponsive surface is based on polyelectrolyte multilayer films built on a silicone sheet and where RGD-grafted polyelectrolytes are embedded under antifouling phosphorylcholine-grafted polyelectrolytes. The stretching of this film induces an increase in fibroblast cell viability and adhesion.

Dynamic aspects of films prepared by a sequential deposition of species: perspectives for smart and responsive materials

The deposition of surface coatings using a step-by-step approach from mutually interacting species allows the fabrication of so called "multilayered films". These coatings are very versatile and easy to produce in environmentally friendly conditions, mostly from aqueous solution. They find more and more applications in many hot topic areas, such as in biomaterials and nanoelectronics but also in stimuli-responsive films. We aim to review the most recent developments in such stimuli-responsive coatings based on layer-by-layer (LBL) depositions in relationship to the properties of these coatings. The most investigated stimuli are based on changes in ionic strength, temperature, exposure to light, and mechanical forces. The possibility to induce a transition from linear to exponential growth in thickness and to change the charge compensation from "intrinsic" to "extrinsic" by controlling parameters such as temperature, pH, and ionic strength are the ways to confer their responsiveness to the films. Chemical post-modifications also allow to significantly modify the film properties.