A novel and universal route to SiO2-supported organic/inorganic hybrid noble metal nanomaterials via surface RAFT polymerization

Pyridine-bridged cobalt tetra-aminophthalocyanine to active peroxymonosulphate for efficient degrading carbamazepine

In this study, each cobalt tetra-aminophthalocyanine (CoTAPc) molecule was immobilised with four isonicotinic acid (INA) molecules by amide bonding, a novel and highly efficient catalyst pyridine-bridged cobalt tetra-aminophthalocyanine (CoTAPc-TINA) was synthesised. The introduction of INA molecules promoted CoTAPc to expose more active sites, and increased the electron cloud density of cobalt ions promoting O-O bond homolysis of PMS to generate more active species, which significantly enhanced catalytic activity. With the pharmaceutical of carbamazepine (CBZ) as model pollutant, 0.1 g/L CoTAPc-TINA in dark in the presence of 0.4 mM PMS, 98.8% CBZ was removed within 10 min. However, under the same conditions the removed of CBZ was only 58.9% by CoTAPc/PMS system. Radical capture experiments combined electron paramagnetic resonance technology demonstrate that hydroxyl radicals, sulphate radicals, superoxide radicals and singlet oxygen are the main active species in the CoTAPc-TINA/PMS system. As the reaction proceeded, all aromatic intermediates were transformed to small molecular acids by these active species. This investigation provided a new insight for application of metal phthalocyanine in wastewater treatment.

Hairy silica nanosphere supported metal nanoparticles for reductive degradation of dye pollutants

Hairy materials can act as a sort of scaffold for the fabrication of functional hybrid composites. In this work, silica nanospheres modified with covalently grafted poly(4-vinylpyridine) (P4VP) brushes, namely, "hairy" silica spheres, were utilized as a support for the anchorage of metal nanoparticles (MNPs), thus resulting in the hierarchical SiO₂@P4VP/MNP structure. In this triple-phase boundary heteronanostructure, the SiO₂-supported MNPs are well stabilized by the P4VP matrix to avoid aggregation and leaching. These SiO₂@P4VP/MNP nanocomposites exhibit good catalytic activity in the reductive degradation of organic dyes, i.e., 4-nitrophenol and rhodamine B and possess excellent stability and recyclability for five successive cycles.

Recent Advances in the Synthesis of Polymer-Grafted Low-K and High-K Nanoparticles for Dielectric and Electronic Applications

The synthesis of polymer-grafted nanoparticles (PGNPs) or hairy nanoparticles (HNPs) by tethering of polymer chains to the surface of nanoparticles is an important technique to obtain nanostructured hybrid materials that have been widely used in the formulation of advanced polymer nanocomposites. Ceramic-based polymer nanocomposites integrate key attributes of polymer and ceramic nanomaterial to improve the dielectric properties such as breakdown strength, energy density and dielectric loss. This review describes the "grafting from" and "grafting to" approaches commonly adopted to graft polymer chains on NPs pertaining to nano-dielectrics. The article also covers various surface initiated controlled radical polymerization techniques, along with templated approaches for grafting of polymer chains onto SiO2, TiO2, BaTiO3, and Al2O3 nanomaterials. As a look towards applications, an outlook on high-performance polymer nanocomposite capacitors for the design of high energy density pulsed power thin-film capacitors is also presented.

Hydrophobic Modification on the Surface of SiO2 Nanoparticle: Wettability Control

Good control of the morphology, particle size, and wettability of silica nanoparticles is of increasing importance to their use in a variety of fields. Here, we propose a strategy to tune the surface wettability of nanosilica by changing the dosage of a chemical modifier. A series of measurements, including scanning electron microscopy (SEM), laser scatting technique, Fourier transform infrared (FTIR) spectroscopy, thermogravimetry, and surface hydroxyl number and water contact angle measurement, were conducted to verify the surface chemistry and wettability of these nanoparticles. Through controlled chemical modification, the contact angle of the treated nanoparticles increases from 34.7 to 155° with increasing amount of dichlorodimethylsilane (DCDMS) within a molar ratio (MR) between DCDMS and nanoparticles of 5.17. The number of hydroxyl groups covered on the particle surface decreases gradually from 1.79 to 0.47, and the surface grafting rate could reach 73.7%. As the addition of dichlorodimethylsilane equals MR 5.17, the contact angle reaches the maximum value of 155°, which displays excellent superhydrophobicity. After surpassing the point of MR 5.17, the contact angle does not increase but starts to decrease, ultimately remaining stable at 135°. It can be concluded that the surface wettability of nano-SiO₂ particles can be precisely modulated by varying the amounts of the modifier. Furthermore, the modulating mechanism of the process occurring on the surface of SiO₂ particles has been investigated at the molecular level.

Solvent Quality-Mediated Regioselective Modification of Gold Nanorods with Thiol-Terminated Polymers

Modification of nanorods (NRs) with functional polymer ligands is of great significance to enhance their surface chemistry and prompt their applications in many fields (e.g., photothermal therapy, bioimaging, and catalysis). However, the regioselective modification of AuNRs still remains a great challenge. Herein, we introduce a facile yet versatile strategy to achieve the regioselective modification of AuNRs through a solvent quality-mediated strategy. By employing a poor solvent of the original ligand cetyltrimethylammonium bromide (CTAB) as the medium in the modification, polymer ligands would selectively graft onto the two ends of AuNRs, while polymer ligands would graft onto the entire surface when employing a good solvent. This strategy demonstrates good reproducibility and is applicable to both hydrophilic and hydrophobic polymer ligand modifications. Moreover, by combing our strategy with the preoccupation route, the two ends and sidewall of AuNRs modified by two different polymers form an "ABA"-type building block, which can further self-assemble into well-ordered superstructures. Our finding provides a new opportunity for multifunctionalization of NRs.

Self-assembly of strawberry-like organic–inorganic hybrid particle clusters with directionally distributed bimetal and facile transformation of the core and corona

Controllable structure of organic–inorganic hybrid particle clusters were successfully fabricated by self-assembly which derived from the strong interaction between carboxyl groups of the organic particles and amino groups of the inorganic particles.

High-Valent Iron-Oxo Complexes as Dominant Species to Eliminate Pharmaceuticals and Chloride-Containing Intermediates by the Activation of Peroxymonosulfate Under Visible Irradiation

Abstract

Generally, the sulfate (SO4·−) and hydroxyl (HO·) radicals are the dominant active species in most catalytic oxidation processes with peroxymonosulfate (PMS). However, the existence of various natural organic and inorganic matters in aquatic environments might influence the oxidation efficiency of these radicals, and/or form more toxic and refractory intermediates than the parent, especially in chlorine-ion-containing conditions. Here, we constructed a novel visible-light catalytic system with PMS based on iron hexadecachlorophthalocyanine-poly (4-vinylpyridine)/polyacrylonitrile nanofibers through pyridine ligands to generate high-valent iron-oxo (Fe(IV)=O) species as the main active species. The coordination structure was characterized by UV–Vis diffuse reflection, X-ray photoelectron spectroscopy, etc. The high-valent iron-oxo generation from peroxysulfate O–O bond heterolytic cleavage was proved by high-definition electrospray ionization mass spectrometer. Ultra-performance liquid chromatography coupled with high-definition mass spectrometry showed that the photocatalytic system was efficient for the degradation of carbamazepine and the chlorinated intermediates by iron-oxo active species in chlorine-ion-containing conditions.

Graphic Abstract

Design, Synthesis and Architectures of Hybrid Nanomaterials for Therapy and Diagnosis Applications

Hybrid nanomaterials based on inorganic nanoparticles and polymers are highly interesting structures since they combine synergistically the advantageous physical-chemical properties of both inorganic and polymeric components, providing superior functionality to the final material. These unique properties motivate the intensive study of these materials from a multidisciplinary view with the aim of finding novel applications in technological and biomedical fields. Choosing a specific synthetic methodology that allows for control over the surface composition and its architecture, enables not only the examination of the structure/property relationships, but, more importantly, the design of more efficient nanodevices for therapy and diagnosis in nanomedicine. The current review categorizes hybrid nanomaterials into three types of architectures: core-brush, hybrid nanogels, and core-shell. We focus on the analysis of the synthetic approaches that lead to the formation of each type of architecture. Furthermore, most recent advances in therapy and diagnosis applications and some inherent challenges of these materials are herein reviewed.

Surface modification of carbon nanotubes by using iron-mediated activators generated by electron transfer for atom transfer radical polymerization

Herein, a surface-initiated activator generated by electron transfer for an atom transfer radical polymerization (AGET ATRP) system was developed on the surface of multiwall carbon nanotubes (MWCNTs) by using FeCl3·6H2O as the catalyst, tris-(3,6-dioxoheptyl) amine (TDA-1) as the ligand and ascorbic acid (AsAc) as the reducing agent. A wide range of polymers, such as polystyrene (PS), poly(methyl methacrylate) (PMMA) and poly(poly(ethylene glycol) methyl ether methacrylate) (PPEGMA), were successfully grafted onto the surfaces. The core-shell structure of MWCNTs@PS was observed by TEM. Both Raman spectra and the results of hydrolysis of MWCNTs@PS (after extraction by THF) confirmed that the PS chains were covalently tethered onto the surfaces of the MWCNTs. Due to superior biocompatibility of the iron catalyst, the strategy of modification of MWCNTs via iron-mediated AGET ATRP provided a promising method for the controllable and biocompatible modification of nanomaterials.

Fried egg-like Au mesostructures grown on poly(4-vinylpyridine) brushes grafted onto graphene oxide

Hierarchical Au mesostructures as SERS-active substrates were facilely fabricated by the reduction of HAuCl₄-loaded poly(4-vinylpyridine) brushes with ascorbic acid.

Monomer Protonation-Dependent Surface Polymerization to Achieve One-Step Grafting Cross-Linked Poly(4-Vinylpyridine) Onto Core-Shell Fe3 O4 @SiO2 Nanoparticles

Functional polymer-grafting silica nanoparticles hold great promise in diverse applications such as molecule recognition, drug delivery, and heterogeneous catalysis due to high density and uniform distribution of functional groups and their tunable spatial distance. However, conventional grafting methods from monomers mainly consist of one or more extra surface modification steps and a subsequent surface polymerization step. A monomer protonation-dependent surface polymerization strategy is proposed to achieve one-step uniform surface grafting of cross-linked poly(4-vinylpyridine) (P4VP) onto core-shell Fe₃ O₄ @SiO₂ nanostructures. At an approximate pH, partially protonated 4VP sites in aqueous solution can be strongly adsorbed onto deprotonated silanol groups (SiO^- ) onto Fe₃ O₄ @SiO₂ nanospheres to ensure prior polymerization of these protonated 4VP sites exclusively onto Fe₃ O₄ @SiO₂ nanoparticles and subsequent polymerization of other 4VP and divinylbenzene monomers harvested by these protonated 4VP monomers onto Fe₃ O₄ @SiO₂ nanoparticles, thereby achieving direct grafting of cross-linked P4VP macromolecules onto Fe₃ O₄ @SiO₂ nanoparticles.

Surface-Initiated Controlled Radical Polymerization: State-of-the-Art, Opportunities, and Challenges in Surface and Interface Engineering with Polymer Brushes

The generation of polymer brushes by surface-initiated controlled radical polymerization (SI-CRP) techniques has become a powerful approach to tailor the chemical and physical properties of interfaces and has given rise to great advances in surface and interface engineering. Polymer brushes are defined as thin polymer films in which the individual polymer chains are tethered by one chain end to a solid interface. Significant advances have been made over the past years in the field of polymer brushes. This includes novel developments in SI-CRP, as well as the emergence of novel applications such as catalysis, electronics, nanomaterial synthesis and biosensing. Additionally, polymer brushes prepared via SI-CRP have been utilized to modify the surface of novel substrates such as natural fibers, polymer nanofibers, mesoporous materials, graphene, viruses and protein nanoparticles. The last years have also seen exciting advances in the chemical and physical characterization of polymer brushes, as well as an ever increasing set of computational and simulation tools that allow understanding and predictions of these surface-grafted polymer architectures. The aim of this contribution is to provide a comprehensive review that critically assesses recent advances in the field and highlights the opportunities and challenges for future work.

Preparation of core–shell attapulgite particles by redox-initiated surface reversible addition–fragmentation chain transfer polymerization via a “graft from” approach

Polymethyl methacrylate layer was grown uniformly from attapulgite by using surface-initiated reversible addition–fragmentation chain transfer polymerization via redox initiation system.

Hybrid nanostructures for SERS: materials development and chemical detection

This review focuses on recent developments in hybrid and nanostructured substrates for SERS (surface-enhanced Raman scattering) studies. Thus substrates composed of at least two distinct types of materials, in which one is a SERS active metal, are considered here aiming at their use as platforms for chemical detection in a variety of contexts. Fundamental aspects related to the SERS effect and plasmonic behaviour of nanometals are briefly introduced. The materials described include polymer nanocomposites containing metal nanoparticles and coupled inorganic nanophases. Chemical approaches to tailor the morphological features of these substrates in order to get high SERS activity are reviewed. Finally, some perspectives for practical applications in the context of chemical detection of analytes using such hybrid platforms are presented.

Oriented immobilization of Au nanoparticles on C@P4VP core–shell microspheres and their catalytic performance

A highly efficient inorganic–organic hybrid catalyst C@P4VP–Au is synthesized by the seeded emulsion polymerization and immobilization process.

Surface-initiated controlled radical polymerizations from silica nanoparticles, gold nanocrystals, and bionanoparticles

This review summarizes recent progress in surface-initiated controlled radical polymerizations from silica nanoparticles, gold nanocrystals, and bionanoparticles.

Barbituric acid-based magnetic N-halamine nanoparticles as recyclable antibacterial agents

Novel recyclable bactericidal materials, barbituric acid-based magnetic N-halamine nanoparticles (BAMNH NPs), were fabricated by coating of magnetic silica nanoparticles (MS NPs) with barbituric acid-based N-halamine by the aid of the radical polymerization. The sterilizing effect on the bacterial strain is investigated by incubating Gram-negative bacteria (Escherichia coli and Pseudomonas aeruginosa) and Gram-positive bacteria (Staphylococcus aureus and Bacillus subtilis). The as-prepared BAMNH NPs exhibit higher biocidal activity than the bulk powder barbituric acid-based N-halamine due to the high activated surface area. The structural effect of N-halamine on antimicrobial performance was fully clarified through the comparison between BAMNH NPs and hydantoin-based magnetic N-halamine nanoparticles (HMNH NPs). BAMNH NPs exhibited promising stability toward repeated washing and long-term storage. BAMNH NPs with different chlorine content were comparatively chosen to investigate the influence of chlorine content on the antimicrobial activity. An antibacterial recycle experiment revealed that no significant change occurred in the structure and antibacterial efficiency of BAMNH NPs after five recycle experiments. The combination of barbituric acid-based N-halamine with magnetic component results in an obvious synergistic effect and facilitates the repeated antibacterial applications, providing potential and ideal candidates for sterilization or even for the control of disease.

The synthesis of well-defined poly(vinylbenzyl chloride)-grafted nanoparticles via RAFT polymerization

We describe the use of one of the most advanced radical polymerization techniques, the reversible addition fragmentation chain transfer (RAFT) process, to produce highly functional core–shell particles based on a silica core and a shell made of functional polymeric chains with very well controlled structure. The versatility of RAFT polymerization is illustrated by the control of the polymerization of vinylbenzyl chloride (VBC), a highly functional monomer, with the aim of designing silica core–poly(VBC) shell nanoparticles. Optimal conditions for the control of VBC polymerization by RAFT are first established, followed by the use of the “grafting from” method to yield polymeric brushes that form a well-defined shell surrounding the silica core. We obtain particles that are monodisperse in size, and we demonstrate that the exceptional control over their dimensions is achieved by careful tailoring the conditions of the radical polymerization.

Fabrication of magnetic-antimicrobial-fluorescent multifunctional hybrid microspheres and their properties

Novel magnetic-antimicrobial-fluorescent multifunctional hybrid microspheres with well-defined nanostructure were synthesized by the aid of a poly(glycidyl methacrylate) (PGMA) template. The hybrid microspheres were fully characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared (FTIR), X-ray diffraction (XRD) and digital fluorescence microscope. The as-synthesized microspheres PGMA, amino-modified PGMA (NH₂-PGMA) and magnetic PGMA (M-PGMA) have a spherical shape with a smooth surface and fine monodispersity. M-PGMA microspheres are super-paramagnetic, and their saturated magnetic field is 4.608 emu·g⁻¹, which made M-PGMA efficiently separable from aqueous solution by an external magnetic field. After poly(haxemethylene guanidine hydrochloride) (PHGH) functionalization, the resultant microspheres exhibit excellent antibacterial performance against both Gram-positive and Gram-negative bacteria. The fluorescence feature originating from the quantum dot CdTe endowed the hybrid microspheres with biological functions, such as targeted localization and biological monitoring functions. Combination of magnetism, antibiosis and fluorescence into one single hybrid microsphere opens up the possibility of the extensive study of multifunctional materials and widens the potential applications.

Bifunctional nanoparticles with fluorescence and magnetism via surface-initiated AGET ATRP mediated by an iron catalyst

Fluorescent/magnetic nanoparticles are of interest in many applications in biotechnology and nanomedicine for its living detection. In this study, a novel method of surface modification of nanoparticles was first used to modify a fluorescent monomer on the surfaces of magnetic nanoparticles directly. This was achieved via iron(III)-mediated atom-transfer radical polymerization with activators generated by electron transfer (AGET ATRP). Fluorescent monomer 9-(4-vinylbenzyl)-9H-carbazole (VBK) was synthesized and was grafted from magnetic nanoparticles (ferroferric oxide) via AGET ATRP using FeCl(3)·6H(2)O as the catalyst, tris(3,6-dioxaheptyl)amine (TDA-1) as the ligand, and ascorbic acid (AsAc) as the reducing agent. The initiator for ATRP was modified on magnetic nanoparticles with the reported method: ligand exchange with 3-aminopropyltriethoxysilane (APTES) and then esterification with 2-bromoisobutyryl bromide. After polymerization, a well-defined nanocomposite (Fe(3)O(4)@PVBK) was yielded with a magnetic core and a fluorescent shell (PVBK). Subsequently, well-dispersed bifunctional nanoparticles (Fe(3)O(4)@PVBK-b-P(PEGMA)) in water were obtained via consecutive AGET ATRP of hydrophilic monomer poly(ethylene glycol) methyl ether methacrylate (PEGMA). The chemical composition of the magnetic nanoparticles' surface at different surface modification stages was investigated with Fourier transform infrared (FT-IR) spectra. The magnetic and fluorescent properties were validated with a vibrating sample magnetometer (VSM) and a fluorophotometer. The Fe(3)O(4)@PVBK-b-P(PEGMA) nanoparticles showed an effective imaging ability in enhancing the negative contrast in magnetic resonance imaging (MRI).