Direct photochemical functionalization of Si(111) with undecenol

Adsorption of Homotrifunctional 1,2,3-Benzenetriol on a Ge(100)-2 × 1 Surface

The adsorption of the homotrifunctional 1,2,3-benzenetriol on Ge(100)-2 × 1 has been investigated by density functional theory calculations, Fourier transform infrared spectroscopy, and X-ray-photoelectron spectroscopy. The results show that the adsorption can occur through OH dissociation of all three hydroxyl groups, and that all three reaction pathways are kinetically and thermodynamically favorable. A coverage-dependent analysis shows that at low coverage, the molecule reacts to form a mix of trifold and dually bound adsorbates. As the coverage increases, the reactions are limited to dissociative adsorption through single and dual attachments. Calculations on the three possible dually bound configurations further reveals that the dissociative adsorption of the third hydroxyl group is limited by geometrical constraints to only two reaction channels. Finally, the proximity between OH-groups in the molecule favors intra- and intermolecular hydrogen bonding, which stabilizes singly and dually bound adsorbate configurations and limits the reactivity of the functional groups.

Surface-Initiated Controlled Radical Polymerization: State-of-the-Art, Opportunities, and Challenges in Surface and Interface Engineering with Polymer Brushes

The generation of polymer brushes by surface-initiated controlled radical polymerization (SI-CRP) techniques has become a powerful approach to tailor the chemical and physical properties of interfaces and has given rise to great advances in surface and interface engineering. Polymer brushes are defined as thin polymer films in which the individual polymer chains are tethered by one chain end to a solid interface. Significant advances have been made over the past years in the field of polymer brushes. This includes novel developments in SI-CRP, as well as the emergence of novel applications such as catalysis, electronics, nanomaterial synthesis and biosensing. Additionally, polymer brushes prepared via SI-CRP have been utilized to modify the surface of novel substrates such as natural fibers, polymer nanofibers, mesoporous materials, graphene, viruses and protein nanoparticles. The last years have also seen exciting advances in the chemical and physical characterization of polymer brushes, as well as an ever increasing set of computational and simulation tools that allow understanding and predictions of these surface-grafted polymer architectures. The aim of this contribution is to provide a comprehensive review that critically assesses recent advances in the field and highlights the opportunities and challenges for future work.

Rapid Covalent Modification of Silicon Oxide Surfaces through Microwave-Assisted Reactions with Alcohols

We demonstrate the method of a rapid covalent modification of silicon oxide surfaces with alcohol-containing compounds with assistance by microwave reactions. Alcohol-containing compounds are prevalent reagents in the laboratory, which are also relatively easy to handle because of their stability against exposure to atmospheric moisture. The condensation of these alcohols with the surfaces of silicon oxides is often hindered by slow reaction kinetics. Microwave radiation effectively accelerates this condensation reaction by heating the substrates and/or solvents. A variety of substrates were modified in this demonstration, such as silicon oxide films of various thicknesses, glass substrates such as microscope slides (soda lime), and quartz. The monolayers prepared through this strategy demonstrated the successful formation of covalent surface modifications of silicon oxides with water contact angles of up to 110° and typical hysteresis values of 2° or less. An evaluation of the hydrolytic stability of these monolayers demonstrated their excellent stability under acidic conditions. The techniques introduced in this article were successfully applied to tune the surface chemistry of silicon oxides to achieve hydrophobic, oleophobic, and/or charged surfaces.

Local Light-Induced Modification of the Inside of Microfluidic Glass Chips

The ability to locally functionalize the surface of glass allows for myriad biomedical and chemical applications. This would be the case if the surface functionalization can be induced using light with wavelengths for which standard glass is almost transparent. To this aim, we present the first example of a photochemical modification of hydrogen-terminated glass (H-glass) with terminal alkenes. Both flat glass surfaces and the inside of glass microchannels were modified with a well-defined, covalently attached organic monolayer using a range of wavelengths, including sub-band-gap 302 nm ultraviolet light. A detailed characterization thereof was conducted by measurements of the static water contact angle, X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and scanning Auger microscopy (SAM). Germanium attenuated total reflection Fourier transform infrared (GATR-FTIR) indicates that the mechanism of the surface modification proceeds via an anti-Markovnikov substitution. Reacting H-glass with 10-trifluoro-acetamide-1-decene (TFAAD) followed by basic hydrolysis affords the corresponding primary amine-terminated monolayer, enabling additional functionalization of the substrate. Furthermore, we show the successful formation of a photopatterned amine layer by the specific attachment of fluorescent nanoparticles in very discrete regions. Finally, a microchannel was photochemically patterned with a functional linker allowing for surface-directed liquid flow. These results demonstrate that H-glass can be modified with a functional tailor-made organic monolayer, has highly tunable wetting properties, and displays significant potential for further applications.

UV-initiated hydrosilylation on hydrogen-terminated silicon (111): rate coefficient increase of two orders of magnitude in the presence of aromatic electron acceptors

UV-initiated (254 nm) hydrosilylation of hexadecene on Si(111)-H has been studied in the presence of various aliphatic and aromatic molecules (additives). Many of these additives cause an enhancement in the pseudo-first-order rate coefficient (k(obs)) of hydrosilylation, some up to 200× faster than observed in neat hexadecene. It is proposed that these additives capture the photoejected electron from the surface, thereby increasing the probability of reaction of the alkene with the surface hole (h(+)), leading to Si-C bond formation. While the ability of these additives to increase k(obs) is related to their reduction potential, aromatic additives are particularly efficient; we suspect this is due to the relatively strong physisorption of the aromatic molecules leading to a favorable geometry for electron transfer. The presence of these additives permits the use of a much lower intensity of UV light (~30 μW/cm(2)), reducing the probability of photodegradation of the monolayer, and maximum coverage can be reached within minutes.

Influence of the molecular design on the antifouling performance of poly(ethylene glycol) monolayers grafted on (111) Si

Various poly(ethylene glycol) monomethyl ether moieties were grafted onto hydrogenated silicon surfaces in order to investigate the influence of the molecular design on the antifouling performance of such coatings. The grafted chains were either oligo(ethylene oxide) chains (EG)(n)OMe bound to silicon via Si-O-C covalent bonds, or hybrid alkyl/oligo(ethylene oxide) chains C(p)(EG)(n)OMe bound via Si-C covalent bonds (from home-synthesized precursors). Quantitative IR spectroscopy gave the molecular coverage of the grafted layers, and AFM imaging demonstrated that a proper surfactinated rinse yields C(p)(EG)(n)OMe layers free of unwanted residues. The protein-repellent character of these grafted layers (here, toward BSA) was studied by IR and AFM imaging. C(p)(EG)(n)OMe layers exhibit a lower surface concentration than (EG)(n)OMe layers, because of the presence of a solvent in the grafting solution; they however demonstrate high resistance against BSA adsorption for high values of the n/p ratio and a higher stability than (EG)(n)OMe. This behavior is consistently explained by the poor ordering capability of the alkyl part of the layer, contrary to what is observed for similar layers on Au, and the key role of an entangled arrangement of the ethylene oxide chains which forms when these chains are long enough.

Hybrids of organic molecules and flat, oxide-free silicon: high-density monolayers, electronic properties, and functionalization

Since the first report of Si-C bound organic monolayers on oxide-free Si almost two decades ago, a substantial amount of research has focused on studying the fundamental mechanical and electronic properties of these Si/molecule surfaces and interfaces. This feature article covers three closely related topics, including recent advances in achieving high-density organic monolayers (i.e., atomic coverage >55%) on oxide-free Si(111) substrates, an overview of progress in the fundamental understanding of the energetics and electronic properties of hybrid Si/molecule systems, and a brief summary of recent examples of subsequent functionalization on these high-density monolayers, which can significantly expand the range of applicability. Taken together, these topics provide an overview of the present status of this active area of research.