Layer-by-layer assembly of thiol-capped au nanoparticles on a water surface and their deposition on H-terminated Si(001) by the Langmuir-Blodgett method

Macroscopic two-dimensional monolayer films of gold nanoparticles: fabrication strategies, surface engineering and functional applications

In the last few decades, two-dimensional monolayer films of gold nanoparticles (2D MFGS) have attracted increasing attention in various fields, due to their superior attributes of macroscopic size and accessible fabrication, controllable electromagnetic enhancement, distinctive optical harvesting and electron transport capabilities. This review will focus on the recent progress of 2D monolayer films of gold nanoparticles in construction approaches, surface engineering strategies and functional applications in the optical and electric fields. The research challenges and prospective directions of 2D MFGS are also discussed. This review would promote a better understanding of 2D MFGS and establish a necessary bridge among the multidisciplinary research fields.

25th anniversary article: what can be done with the Langmuir-Blodgett method? Recent developments and its critical role in materials science

The Langmuir-Blodgett (LB) technique is known as an elegant method for fabrication of well-defined layered structures with molecular level precision. Since its discovery the LB method has made an indispensable contribution to surface science, physical chemistry, materials chemistry and nanotechnology. However, recent trends in research might suggest the decline of the LB method as alternate methods for film fabrication such as layer-by-layer (LbL) assembly have emerged. Is LB film technology obsolete? This review is presented in order to challenge this preposterous question. In this review, we summarize recent research on LB and related methods including (i) advanced design for LB films, (ii) LB film as a medium for supramolecular chemistry, (iii) LB technique for nanofabrication and (iv) LB involving advanced nanomaterials. Finally, a comparison between LB and LbL techniques is made. The latter reveals the crucial role played by LB techniques in basic surface science, current advanced material sciences and nanotechnologies.

Synchrotron X-ray studies of rapidly evolving morphology of self-assembled nanoparticle films under lateral compression

Interfacial nanostructures represent a class of systems that are highly relevant to studies of quasi-2D phases, chemical self-assembly, surfactant behavior, and biologically relevant membranes. Previous studies have shown that under lateral compression a Langmuir film of gold (Au) nanoparticles assembled at the liquid-air interface exhibits rich mechanical behavior: it undergoes a rapid structural and morphological evolution from a monolayer to a trilayer via an intermediate hash-like phase. We report the results of studying this structural evolution using grazing incidence X-ray off-specular scattering (GIXOS). We utilize GIXOS to obtain a quantitative mapping of electron density profile normal to the liquid surface with a subnanometer resolution and follow the structural evolution of the Au nanoparticle film under lateral compression with a subminute temporal resolution. As the surface pressure is increased, the self-assembled nanoparticle monolayer first crinkles into a double-layer phase before forming a trilayer. This study reveals the existence of a transient bilayer phase and provides a microscopic picture of the particle-level crinkling phenomena of ultrathin films. These studies were previously impossible due to the relatively short time scales involved in crinkling formation of these transient phases and their intrinsically inhomogeneous nature.

Detection of layer-by-layer self-assembly multilayer films by low-temperature plasma mass spectrometry

The detection of layer-by-layer self-assembly multilayer films was carried out using low-temperature plasma (LTP) mass spectrometry (MS) under ambient conditions. These multilayer films have been prepared on quartz plates through the alternate assembling of oppositely charged 4-aminothiophenol (4-ATP) capped Au particles and thioglycolic acid (TGA) capped Ag particles. An LTP probe was used for direct desorption and ionization of chemical components on the films. Without the complicated sample preparation, the structure information of 4-ATP and TGA on films was studied by LTP-MS. Characteristic ions of 4-ATP (M) and TGA (F), including [M](+•), [M-NH(2)](+), [M-HCN-H](+), and [F + H](+), [F-H](+), [F-OH](+), [F-COOH](+) were recorded by LTP-MS on the films. However, [M-CS-H](+) and [F-SH](+) could not be observed on the film, which were detected in the neat sample. In addition, the semi-quantitative analysis of chemical components on monolayer film was carried out, and the amounts of 4-ATP and TGA on monolayer surface were 45 ng/mm(2) and 54 ng/mm(2), respectively. This resulted the ionization efficiencies of 72% for 4-ATP and 54% for TGA. In order to evaluate the reliability of present LTP-MS, the correlations between this approach and some traditional methods, such as UV-vis spectroscopy, atomic force microscope and X-ray photoelectron spectroscopy were studied, which resulted the correlation coefficients of higher than 0.9776. The results indicated that this technique can be used for analyzing the films without any pretreatment, which possesses great potential in the studies of self-assembly multilayer films.

Chloroform-enhanced incorporation of hydrophobic gold nanocrystals into dioleoylphosphatidylcholine (DOPC) vesicle membranes

Vesicles of dioleoylphosphatidylcholine (DOPC) formed by extrusion (liposomes) with hydrophobic alkanethiol-capped Au nanocrystals were studied. Dodecanethiol-capped 1.8-nm-diameter Au nanocrystals accumulate in the lipid bilayer, but only when dried lipid-nanocrystal films were annealed with chloroform prior to hydration. Without chloroform annealing, the Au nanocrystals phase separate from DOPC and do not load into the liposomes. Au nanocrystals with slightly longer capping ligands of hexadecanethiol or with a larger diameter of 4.1 nm disrupted vesicle formation and created lipid assemblies with many internal lamellar attachments.

Nonequilibrium phases of nanoparticle Langmuir films

We report on an in-situ observation of the colloidal silver nanoparticle self-assembly into a close-packed monolayer at the air/water interface followed by a 2D to 3D transition. Using the fast tracking GISAXS technique, we were able to observe the immediate response to the compression of the self-assembled nanoparticle layer at the air/water interface and to identify all relevant intermediate stages including those far from the equilibrium. In particular, a new nonequilibrium phase before the monolayer collapse via the 2D to 3D transition was found that is inaccessible by the competing direct space imaging techniques such as the scanning and transmission electron microscopies due to the high water vapor pressure and surface tension.

Properties and structure of interfacial layers formed by hydrophilic silica dispersions and palmitic acid

The properties and structure of different types of interfacial layers obtained from aqueous dispersions of nanometric silica and palmitic acid (PA) have been studied and characterized by different diagnostics and measurements. The investigations concern PA monolayers spread on the silica dispersions, dispersions in contact with PA solutions in oil and silica dispersions containing PA, aiming at elucidating the role of the PA interaction with the particles and investigating the surface-activity of the originated silica-PA complexes. Drop shape tensiometry was utilized to measure the dynamic surface and interfacial tension while a Langmuir trough apparatus was used to obtain compression isotherms of the spread PA layers and to measure the dilational viscoelasticity according to the oscillating barrier method. Brewster angle microscopy and ellipsometry were utilized to investigate the lateral and vertical structure of the interfacial layers. From this multifold approach emerges a complex picture of the features of these interfacial layers that can be rationalized on the basis of the adsorption of PA on the particle surface. The results evidence a threshold in PA adsorption above which particles change from hydrophilic to partially hydrophobic, promoting their incorporation into the interfacial layer.