New insights into the structure of PAMAM dendrimer/gold nanoparticle nanocomposites

The interaction of size-selected Ru3 clusters with TiO2: depth-profiling of encapsulated clusters

Ru is a metal of interest in catalysis. Monodisperse Ru3 clusters as catalytic sites are relevant for the development of catalysts because clusters use significantly lower amounts of precious materials for forming active sites due to the small size of the cluster. However, retaining the mono-dispersity of the cluster size after deposition is a challenge because surface energy could drive both agglomeration and encapsulation of the clusters. In the present work Ru3 clusters are deposited by chemical vapor deposition (CVD) of Ru3(CO)12 and cluster source depositions of bare Ru3 onto radio frequency sputter-deposited TiO2 (RF-TiO2) substrates, TiO2(100), and SiO2. When supported on RF-TiO2, bare Ru3 is encapsulated by a layer of titania substrate material during deposition with a cluster source. Ligated Ru3(CO)12 is also encapsulated by a layer of titania when deposited onto sputter-treated RF-TiO2, but only through heat treatment which is required to remove most of the ligands. The titania overlayer thickness was determined to be 1-2 monolayers for Ru3(CO)12 clusters on RF-TiO2, which is thin enough for catalytic or photocatalytic reactions to potentially occur even without clusters being part of the very outermost layer. The implication for catalysis of the encapsulation of Ru3 into the RF-TiO2 is discussed. Temperature-dependent X-ray photoelectron spectroscopy (XPS), angle-resolved XPS, and temperature-dependent low energy ion scattering (TD-LEIS) are used to probe how the cluster-surface interaction changes due to heat treatment and scanning transmission electron microscopy (STEM) was used to image the depth of the surface from side-on.

Effect of Electric Fields on Silicon-Based Monolayers

Electric fields can induce bond breaking and bond forming, catalyze chemical reactions on surfaces, and change the structure of self-assembled monolayers on electrode surfaces. Here, we study the effect of electric fields supplied either by an electrochemical potential or by conducting atomic force microscopy (C-AFM) on Si-based monolayers. We report that typical monolayers on silicon undergo partial desorption followed by the oxidation of the underneath silicon at +1.5 V vs Ag/AgCl. The monolayer loses 28% of its surface coverage and 55% of its electron transfer rate constant (k_et) when +1.5 V electrochemical potential is applied on the Si surface for 10 min. Similarly, a bias voltage of +5 V applied by C-AFM induces complete desorption of the monolayer at specific sites accompanied by an average oxide growth of 2.6 nm when the duration of the bias applied is 8 min. Current-voltage plots progressively change from rectifying, typical of metal-semiconductor junctions, to insulating as the oxide grows. These results define the stability of Si-based organic monolayers toward electric fields and have implication in the design of silicon-based monolayers, molecular electronics devices, and on the interpretation of charge-transfer kinetics across them.

Experimental and Computational Characterization of the Interaction between Gold Nanoparticles and Polyamidoamine Dendrimers

Dendrimers provide a means to control the synthesis of gold nanoparticles and stabilize their suspensions. However, design of improved dendrimers for this application is hindered by a lack of understanding how the dendrimers and synthesis conditions determine nanoparticle morphology and suspension stability. In the present work, we evaluate the effect of polyamidoamine (PAMAM) dendrimers terminated with different functional groups (-OH or -NH₃⁺) and different synthesis conditions on the morphology of the resulting gold nanoparticles and their stability in solution. We leverage molecular dynamics (MD) simulations to identify the atomic interactions that underlie adsorption of PAMAM dendrimers to gold surface and how the thermodynamics of this adsorption depends on the terminal functional groups of the dendrimers. We find that gold nanoparticles formed with hydroxyl-terminated PAMAM (PAMAM-OH) rapidly aggregate, whereas those formed with PAMAM-NH₃⁺ are stable in solution for months of storage. Synthesis under ultrasound sonication is shown to be more rapid than that under agitation, with sonication producing smaller nanoparticles. Free-energy calculations in MD simulations show that all dendrimers have a high affinity for the gold surface, although PAMAM-OH and its oxidized aldehyde form (PAMAM-CHO) have a greater affinity for the nanoparticle surface than PAMAM-NH₃⁺. Although adsorption of PAMAM-OH and PAMAM-CHO has both favorable entropy and enthalpy, adsorption of PAMAM-NH₃⁺ is driven by a strong enthalpic component subject to an unfavorable entropic component.

Using the dendritic polymer PAMAM to form gold nanoparticles in the protein cage thermosome

The chaperonin thermosome (THS) is a protein cage that lacks binding sites for metal ions and inorganic nanoparticles. However, when poly(amidoamine) (PAMAM) is encapsulated into THS, gold nanoparticles (AuNP) can be prepared in the THS. The polymer binds HAuCl4. Subsequent reduction yields nanoparticles with narrow size distribution in the protein-polymer conjugate.

Synergistic Effects of Gold-Palladium Nanoalloys and Reducible Supports on the Catalytic Reduction of 4-Nitrophenol

Herein we report on the catalytic activity of mesoporous nickel, iron, cerium, cobalt, and manganese oxides prepared using KIT-6 as a hard template via evaporation-assisted precipitation. The mesoporous metal oxides (MMOs) were characterized and used as heterogeneous catalysts in the reduction of 4-nitrophenol (4-Nip) by sodium borohydride (BH₄^-). Furthermore, polyamidoamide (PAMAM) dendrimers were used to synthesize gold-palladium nanoalloy particles. The size of AuPd/PAMAM was found to be 3.5 ± 0.8 nm in diameter before being immobilized on the aforementioned mesoporous metal oxides and used as catalysts in the reduction of 4-Nip. Prior to catalytic evaluation, the reduction profiles of the mesoporous metal oxides were investigated by hydrogen-temperature-programmed reduction (H₂-TPR) and showed that mesoporous metal oxides can be easily reduced at lower temperatures and that the immobilization of gold-palladium nanoalloy particles lowers their reduction temperatures. Mesoporous cobalt and manganese oxides showed catalytic activity toward 4-Nip reduction, and the activity was enhanced after immobilization of the gold-palladium nanoalloys. Isolation of nanoparticles activity was achieved by immobilization of the gold-palladium nanoalloys on the inert silica support. From this we postulated an electron relay mechanism for the reduction of 4-nitrophenol. With the use of power rate law we showed that 4-Nip reduction follows pseudo-first-order kinetics.

Highly functionalized heterogeneous dendrigraft catalysts with peripheral copper moieties for the facile synthesis of 2-substituted benzimidazoles and 2,2-disubstituted benzimidazoles

A highly functionalized heterogeneous copper loaded dendrigraft amidoamine catalyst for the synthesis of 2-substituted and 2,2-disubstituted benzimidazoles is reported.

Synthesis of PEGylated low generation dendrimer-entrapped gold nanoparticles for CT imaging applications

Dendrimer-entrapped gold nanoparticles (Au DENPs) can be formed using low-generation dendrimers pre-modified by polyethylene glycol (PEG). The formed PEGylated Au DENPs with desirable stability, cytocompatibility, and X-ray attenuation properties enable efficient computed tomography imaging of the heart and tumor model of mice.

Investigation of self-assembling proline- and glycine-rich recombinant proteins and peptides inspired by proteins from a symbiotic fungus using atomic force microscopy and circular dichroism spectroscopy

Fiber-forming proteins and peptides are being scrutinized as a promising source of building blocks for new nanomaterials. Arabinogalactan-like (AGL) proteins expressed at the symbiotic interface between plant roots and arbuscular mycorrhizal fungi have novel sequences, hypothesized to form polyproline II (PPII) helix structures. The functional nature of these proteins is unknown but they may form structures for the establishment and maintenance of fungal hyphae. Here we show that recombinant AGL1 (rAGL1) and recombinant AGL3 (rAGL3) are extended proteins based upon secondary structural characteristics determined by electronic circular dichroism (CD) spectroscopy and can self-assemble into fibers and microtubes as observed by atomic force microscopy (AFM) and scanning electron microscopy (SEM). CD spectroscopy results of synthetic peptides based on repeat regions in AGL1, AGL2 and AGL3 suggest that the synthetic peptides contain significant amounts of extended PPII helices and that these structures are influenced by ionic strength and, at least in one case, by concentration. Point mutations of a single residue of the repeat region of AGL3 resulted in altered secondary structures. Self-assembly of these repeats was observed by means of AFM and optical microscopy. Peptide (APADGK)(6) forms structures with similar morphology to rAGL1 suggesting that these repeats are crucial for the morphology of rAGL1 fibers. These novel self-assembling sequences may find applications as precursors for bioinspired nanomaterials.