FRET detection of proteins using fluorescently doped electrospun nanofibers and pattern recognition

Recent advances in FRET-Based biosensors for biomedical applications

Fluorescence resonance energy transfer (FRET)-based biosensors are effective analytical tools extensively used in fields of biomedicine, pharmacology, toxicology, and food sciences. Ratiometric imaging of substantial cellular processes, molecular components, and biological interactions is widely performed by these biosensors. A variety of FRET-based biosensors have provided comprehensive insights into underlying mechanisms of pathological conditions in live cells, tissues, and organisms. Moreover, integration of FRET-based biosensors with the current bioanalytical techniques allows for accurate, rapid, and sensitive diagnosis and proposes the advanced strategies for treatment. Precise analysis of ligand-receptor interactions by FRET-based biosensors has presented a basis for determination of novel therapeutic agents. Therefore, this study was designed to review the recent developments in FRET-based biosensors and their biomedical applications. In addition, characteristics, challenges, and outlooks of these biosensors were discussed.

Time-resolved photoluminescence of 6-thienyl-lumazine fluorophores in cellulose acetate nanofibers for detection of mercury ions

Time-resolved photoluminescence measurements were used to characterize the photophysical properties of 6-thienyllumazine (TLm) fluorophores in cellulose acetate nanofibers (NFs) in the presence and absence of mercuric acetate salts. In solution, excited-state proton transfer (ESPT) from TLm to water molecules was investigated at pH from 2 to 12. The insertion of thienyl group into lumazine introduces cis and trans conformers while keeping the same tautomerization structures. Global and target analyses were employed to resolve the true emission spectra of all prototropic, tautomeric, and rotameric species for TLm in water. The results support the premise that only the cis conformers are related to the ESPT process. However, no ESPT from TLm to a nearby water molecule was observed in NFs. The addition of NFs increases the excited-state lifetime of TLm in the solid state because of combined polarity/confinement effects. The solid-state fluorescence of TLm (in NFs) was quenched by mercuric acetate through different mechanisms-dynamic and static-depending on the applied pressure-atmospheric and vacuum, respectively. The new solid-state sensor is simple, ecofriendly, and instantly fabricated. TLM-loaded NFs can detect mercuric ions at a concentration of 50 picomolar. The formation of non-fluorescent ground-state complex between TLm molecules and mercuric ions inside the pores of NFs was achieved under vacuum condition.

Electrospun cellulose acetate doped with astaxanthin derivatives from Haematococcus pluvialis for in vivo anti-aging activity

This research aims to study the release, in vivo anti-aging activity against Caenorhabditis elegans and stability of astaxanthins in a crude acetone extract of Haematococcus pluvialis from electrospun cellulose acetate (CA) nanofibers. The content and 2,2-diphenyl-1-picryl-hydrazyl-hydrate (DPPH) radical scavenging activity of astaxanthins in the crude extract were also determined. The content of astaxanthins was reported in terms of total carotenoid content (TCC) and found to be 10.75 ± 0.16 mg gcE-1. IC50 of DPPH radical scavenging activity for astaxanthins was 233.33 ± 4.18 μg mL-1. It has been well known that astaxanthins are very unstable under environmental conditions, so the electrospinning technique was used to enhance their stability. In order to fabricate CA nanofibers containing a crude acetone extract of H. pluvialis, various solvent systems and percent loading of the crude acetone extract were studied. The optimal solvent system for fabrication of CA nanofibers was the acetone/dimethylformamide (DMF) system (2 : 1 v/v) with incorporation of 0.25% v/v Tween80, resulting in good morphology of CA nanofibers with av. 420 nm diameter. The loading efficiency (%) of the crude astaxanthins extract was 5% w/w of CA. With regard to the results of the in vivo oxidative stress assay, C. elegans pre-treated with 200 μg mL-1 of the crude extract had a survival percent of 56 after administration of 250 mM of paraquat for 8 h. Under phosphate-buffered saline (pH 7.4) containing 10% v/v acetone, the release of astaxanthins from the CA nanofibers loaded with the crude extract exhibited a prolonged profile. The stability of astaxanthins in electrospun CA nanofibers was examined using the freeze-thaw cycle testing through a DPPH radical scavenging assay. It was found that their stability was significantly different (P < 0.05) after the 12th freeze-thaw cycle compared with the crude extract.

CQDs-Doped Magnetic Electrospun Nanofibers: Fluorescence Self-Display and Adsorption Removal of Mercury(II)

This paper reports the carbon quantum dots-doped magnetic electrospinning nanofibers for the self-display and removal of Hg(II) ions from water. The fluorescent carbon quantum dots and magnetic Fe₃O₄ nanoparticles were pre-prepared successfully, and they appeared to be homogeneously dispersed in nanofibers via electrospinning. During the sorption of Hg(II) ions, the significant fluorescence signals of nanofibers gradually declined and exhibited a good linear relationship with cumulative adsorption capacity, which could be easily recorded by the photoluminescence spectra. The sorption performance of mercury ions onto the nanofibers was investigated in terms of different experimental factors including contact time, solution pH value, and initial ion concentration. Considering the actual parameters, the nanofibers were sensitive self-display adsorption system for Hg(II) ions in the existence of other cation. The sorption data were described by different kinetic models, which indicate that the whole sorption was controlled by chemical adsorption. The intraparticle diffusion mass transfer was not obvious in this system, which further proved the uniform adsorption and even fluorescence quenching in nanofibers. Additionally, the nanocomposite fiber could regenerate in several cycles with no significant loss of adsorption capacity and fluorescence intensity. Thus, the nanofibers are promising alternatives for environmental pollution incidents. It is especially competent due to its high efficiency for self-display and removal of high concentration of mercury ions.

Turn-on fluorescent sensor for the detection of cyanide based on a novel dicyanovinyl phenylacetylene

A novel phenylacetylene derivative (3) was successfully synthesized via Sonogashira coupling and a Knoevenagel reaction for cyanide ion detection.

Ultrasensitive protein concentration detection on a micro/nanofluidic enrichment chip using fluorescence quenching

A micro/nanofluidic enrichment device combined with the Förster resonance energy transfer (FRET) technique has been developed for sensitive detection of trace quantities of protein. In this approach, sample protein is first adsorbed on gold nanoparticles (AuNPs) to occupy part of the AuNP surface. Then, dye-labeled protein is added, which adsorbs to the residual active sites of the AuNP surface, saturating the AuNP surface with protein molecules. The unadsorbed dye-labeled protein remains in a free state in the system. Keeping a fixed amount of dye-labeled protein, a high concentration of sample protein leads to more free dye-labeled protein molecules remaining in the system, and thus a larger photoluminescence signal. Under the action of an electric field, the free dye-labeled protein molecules can be efficiently enriched in front of the nanochannel of a micro/nanofluidic chip, which greatly amplifies the magnitude of the photoluminescence and improves the detection sensitivity. As a demonstration, bovine serum albumin (BSA) and fluorescein isothiocyanate-labeled dog serum albumin (FITC-DSA) are used as sample and fluorescent proteins, respectively. Using the proposed strategy, a detection limit of BSA as low as 2.5 pg/mL can be achieved, which is more than 10(3) times lower than the reported minimums in most sensitive commercial protein quantification methods.

Application of PAMAM dendrimers in optical sensing

In this review, recent advances have been reported in those PAMAM dendrimer-based optical sensors that are used for the detection of pH, cations, and other analyte.

FRET detection of DNA sequence via electrostatic interaction of polycationic phenyleneethynylene dendrimer with DNA/PNA hybrid

Interaction between a polycationic compound and DNA is a useful phenomenon for development of a new DNA sensing system. In this work, dendritic polycationic phenyleneethynylene fluorophores are investigated as a Förster resonance energy transfer (FRET) donor for the detection of DNA hybridization in conjunction with a fluorescein-labeled pyrrolidinyl peptide nucleic acid (Fl-acpcPNA) probe. The first generation dendrimer is an efficient energy donor for the fluorescein acceptor but also shows non-specific FRET signal with Fl-acpcPNA. The addition of N-methyl 2-pyrrolidone can virtually completely remove the non-specific interaction between Fl-acpcPNA and the dendrimer. Under the optimal condition, the complementary DNA gives a distinctively high FRET ratio (1.42) comparing with those of the non-complementary (0.26) and singly mismatched (0.51) DNAs. The FRET ratio responses linearly with the DNA concentration with the detection limit lower than 1nM. The FRET ratio is even higher for the complementary target DNAs with extra hanging nucleotide sequences, which is a more frequently encountered scenario in real applications.