Multistimuli responsive micelles formed by a tetrathiafulvalene-functionalized amphiphile

The Story of the Little Blue Box: A Tribute to Siegfried Hünig

The tetracationic cyclophane, cyclobis(paraquat-p-phenylene), also known as the little blue box, constitutes a modular receptor that has facilitated the discovery of many host-guest complexes and mechanically interlocked molecules during the past 35 years. Its versatility in binding small π-donors in its tetracationic state, as well as forming trisradical tricationic complexes with viologen radical cations in its doubly reduced bisradical dicationic state, renders it valuable for the construction of various stimuli-responsive materials. Since the first reports in 1988, the little blue box has been featured in over 500 publications in the literature. All this research activity would not have been possible without the seminal contributions carried out by Siegfried Hünig, who not only pioneered the syntheses of viologen-containing cyclophanes, but also revealed their rich redox chemistry in addition to their ability to undergo intramolecular π-dimerization. This Review describes how his pioneering research led to the design and synthesis of the little blue box, and how this redox-active host evolved into the key component of molecular shuttles, switches, and machines.

Harnessing amphiphilic polymeric micelles for diagnostic and therapeutic applications: Breakthroughs and bottlenecks

Amphiphilic block copolymers are widely utilized in the design of formulations owing to their unique physicochemical properties, flexible structures and functional chemistry. Amphiphilic polymeric micelles (APMs) formed from such copolymers have gained attention of the drug delivery scientists in past few decades for enhancing the bioavailability of lipophilic drugs, molecular targeting, sustained release, stimuli-responsive properties, enhanced therapeutic efficacy and reducing drug associated toxicity. Their properties including ease of surface modification, high surface area, small size, and enhanced permeation as well as retention (EPR) effect are mainly responsible for their utilization in the diagnosis and therapy of various diseases. However, some of the challenges associated with their use are premature drug release, low drug loading capacity, scale-up issues and their poor stability that need to be addressed for their wider clinical utility and commercialization. This review describes comprehensively their physicochemical properties, various methods of preparation, limitations followed by approaches employed for the development of optimized APMs, the impact of each preparation technique on the physicochemical properties of the resulting APMs as well as various biomedical applications of APMs. Based on the current scenario of their use in treatment and diagnosis of diseases, the directions in which future studies need to be carried out to explore their full potential are also discussed.

The effect of π-Conjugation on the self-assembly of micelles and controlled cargo release

Here we presented a novel micelle self-assembled from amphiphiles with π-conjugated moieties (OEG-DPH). The π-conjugated structural integrity of the micelles enabled stable encapsulation of Nile Red (NR, model drug). The self-assembly behaviour of the amphiphiles and the release profile of NR loaded micelles were investigated. Spherical core-shell structured NR loaded micelles with low CMC of 57 μg/mL and the efficient intracellular delivery process was monitored. This research provided a way to fabricate stable polymeric micelles and develop a practical nanocarrier for therapeutics delivery.

Electroactive Amphiphiles for Addressable Supramolecular Nanostructures

In this focus review we aim to highlight an exciting class of materials, electroactive amphiphiles (EAAs). This class of functional amphiphilic molecules has been the subject of sporadic investigations over the last few decades, but little attempt has been made to date to gather or organise these investigations into a logical fashion. Here we attempted to gather the most important contributions, provide a framework in which to discuss them, and, more importantly, point towards the areas where we believe these EAAs will contribute to solving wider scientific problems and open new opportunities. Our discussions cover materials based on low molecular weight ferrocenes, viologens and anilines, as well as examples of polymeric and supramolecular EAAs. With the advances of modern analytical techniques and new tools for modelling and understanding optoelectronic properties, we believe that this area of research is ready for further exploration and exploitation.

Multi-modulation for self-assemblies of amphiphilic rigid-soft compounds through alteration of solution polarity and temperature

A new class of small molecule-based amphiphilic carbazole-containing compounds has been designed and synthesized. Detailed analysis of the temperature- and solvent-dependent UV-vis absorption spectra has provided insights into the cooperative self-assembly mechanism of the carbazole-containing compounds. Interestingly, the prepared amphiphilic rigid-soft compounds were also found to display a lower critical solution temperature (LCST) behavior in aqueous solution, which is relatively less explored in small molecule-based materials, leading to promising candidates for the design of a new class of thermo-responsive materials.

Self-Assembled Architectures of Alkynylplatinum(II) Amphiphiles and Their Structural Optimization: A Balance of the Interplay Among Pt···Pt, π-π Stacking, and Hydrophobic-Hydrophobic Interactions

A series of alkynylplatinum(II) terpyridine complexes with triethylene glycol units was synthesized, and their self-assembly properties were investigated in solution by UV-vis absorption, emission, and ¹H NMR spectroscopy. The aggregation behaviors of several water-soluble complexes were investigated in aqueous media. Some of them were found to give rise to uniform fibers, suggesting the important role that triethylene glycol units has in regulating their self-assembly properties. Further modifications of these structures through the incorporation of alkyl chains and changes in counter-anions have rendered the complexes more amphiphilic in nature, and the effect of their alkyl chain lengths was studied and optimized. The distinguishable color and spectral changes upon variations in solvent compositions might have potential applications in developing colorimetric and luminescent probes for the detection of microenvironment change. Furthermore, an optimum chain length, i.e., n-butyl chain, is required for the formation of stable and ordered nanostructures. This represents a delicate balance among Pt···Pt, π-π stacking, and hydrophobic-hydrophobic interactions and provides guiding principles into the construction of supramolecular materials with practical applications.

Dual-responsive vesicles formed by an amphiphile containing two tetrathiafulvalene units in aqueous solution

The first example of tetrathiafulvalene (TTF)-based vesicle fabricated in water solution with 1 vol.% tetrahydrofuran that could be prevented by chemical oxidant Fe(ClO4)3 or electron-deficient cyclobis(paraquat-p-phenylene) tetracation cyclophane (CBPQT(4+)) is described.

Amphiphilic polymeric micelles as microreactors: improving the photocatalytic hydrogen production of the [FeFe]-hydrogenase mimic in water

An amphiphilic polymeric micelle is utilized as a microreactor to load a hydrophobic [FeFe]-hydrogenase mimic for photocatalytic hydrogen production in water.

Crystalline Oligo(ethylene sulfide) Domains Define Highly Stable Supramolecular Block Copolymer Assemblies

With proper control over copolymer design and solvation conditions, self-assembled materials display impressive morphological variety that encompasses nanoscale colloids as well as bulk three-dimensional architectures. Here we take advantage of both hydrophobicity and crystallinity to mediate supramolecular self-assembly of spherical micellar, linear fibrillar, or hydrogel structures by a family of highly asymmetric poly(ethylene glycol)-b-oligo(ethylene sulfide) (PEG-OES) copolymers. Assembly structural polymorphism was achieved with modification of PEG-OES topology (linear versus multiarm) and with precise, monomer-by-monomer control of OES length. Notably, all three morphologies were accessed utilizing OES oligomers with degrees of polymerization as short as three. These exceptionally small assembly forming blocks represent the first application of ethylene sulfide oligomers in supramolecular materials. While the assemblies demonstrated robust aqueous stability over time, oxidation by hydrogen peroxide progressively converted ethylene sulfide residues to increasingly hydrophilic and amorphous sulfoxides and sulfones, causing morphological changes and permanent disassembly. We utilized complementary microscopic and spectroscopic techniques to confirm this chemical stimulus-responsive behavior in self-assembled PEG-OES colloidal dispersions and physical gels. In addition to inherent stimulus-responsive behavior, fibrillar assemblies demonstrated biologically relevant molecular delivery, as confirmed by the dose-dependent activation of murine bone marrow-derived dendritic cells following fibril-mediated delivery of the immunological adjuvant monophosphoryl lipid A. In physical gels composed of either linear or multiarm PEG-OES precursors, rheologic analysis also identified mechanical stimulus-responsive shear thinning behavior. Thanks to the facile preparation, user-defined morphology, aqueous stability, carrier functionality, and stimuli-responsive behaviors of PEG-OES supramolecular assemblies, our findings support a future role for these materials as injectable or implantable biomaterials.

A discrete amphiphilic organoplatinum(II) metallacycle with tunable lower critical solution temperature behavior

Oligo(ethylene glycol) (OEG)-decorated supramolecular assemblies are distinguished by their neutral character and macroscopic temperature-sensitive phase transition behavior. OEG functionalization is an emerging strategy to obtain thermoresponsive macrocyclic amphiphiles, although known methods organize the hydrophilic and hydrophobic segments by covalent bonding. Coordination-driven self-assembly offers an alternative route for organizing OEG-functionalized precursors into nanoscopic architectures, resulting in well-defined metallacycle cores surrounded by hydrophilic scaffolds to impart overall amphiphilic character. Here a tri(ethylene glycol)-functionalized thermosensitive amphiphilic metallacycle was prepared with high efficiency by means of the directional-bonding approach. The ensembles thus formed showed good lower critical solution temperature behavior with a highly sensitive phase separation and excellent reversibility. Moreover, the clouding point decreased with increasing metallacycle concentration and addition of K(+).