Shape and size of highly concentrated micelles in CTAB/NaSal solutions by Small Angle Neutron Scattering (SANS)

Direct Printing of Disperse Dye Inks to Polyester Fabrics without Chemical Pretreatment

Direct inkjet digital printing is a relatively green and environmentally friendly textile printing method with a wide range of applications in the textile printing and dyeing industry. However, pretreatment of the fabric is required before digital printing, which will generate certain energy consumption and wastewater. In this study, a digital direct inkjet printing method was developed to improve the printing accuracy of poly(ethylene terephthalate) (PET) fabrics without any pretreatment. A kind of direct inkjet printing ink was prepared by the response change in temperature viscosity. The increase in viscosity inhibits ink bleeding on the fabric, thereby improving printing accuracy. A thermosensitive direct inkjet printing disperse dye ink was prepared by adding cetyltrimethylammonium bromide (CTAB) and 3-methylsalicylic acid (3MS) to the ink. By evaluating the changes in the ink particle size, shear viscosity, and temperature viscosity, it was found that this thermosensitive ink has an excellent average particle size and special changes in viscosity with increasing temperature. When this heat-sensitive ink is printed on a polyester fabric, the fabric does not need pretreatment to improve the clarity of printing, and the printed fabric has satisfactory color fastness to friction and washing.

Temperature-Derived Purification of Gold Nano-Bipyramids for Colorimetric Detection of Tannic Acid

Gold nanostructures have attracted broad attention. Among various nanostructures, gold nanobipyramids have shown great potential in sensing, biomedicine, environmental protection, chemical catalysis, and optics due to their unique physical and optical properties and ease of chemical functionalization. Compared with other plasmonic nanostructures, gold nanobipyramids possess narrow optical resonances, stronger plasmonic local field enhancement, and size- and shape-dependent surface plasmon resonance. However, the synthesis and purification of homogeneous gold nanobipyramids are very challenging. The gold nanobipyramids synthesized via the commonly used seed-mediated growth method have low yields and are often coproduced with spherical nanoparticles. In this study, we reported a temperature-derived purification method for the isolation of gold bipyramids. In the presence of salt, by altering the temperature of the solution, large gold bipyramids can be separated from small spherical nanoparticles. As a result, a yield of as high as 97% gold nanobipyramids can be achieved through a single round of purification, and correspondingly, the ratio between the longitudinal surface plasmon resonance (LSPR) and transverse SPR intensity significantly increases to as high as 6.7. The purified gold nanobipyramids can be used as a colorimetric probe in the detection of tannic acid with a detection limit of 0.86 μM and a linear detection range from 1.25 to 37.5 μM.

Mixed micellar solubilization for procion blue MxR entrapment and optimization of necessary parameters for micellar enhanced ultrafiltration

In this study, micellar enhanced ultrafiltration, MEUF, being an active methodology, has been employed to remove Procion Blue MxR (PBM) from synthetic effluent. MEUF is being applied to reduce the toxicity level of aqueous system using the micellar media of cationic surfactants i.e. Cetyl trimethylammonium bromide (CTAB) and cetylpyridinium chloride (CPC). Subsequently, the effect of addition of nonionic surfactant, Triton X-100 (TX-100), on solubilizing power of cationic surfactants is investigated. The values of partition coefficient and free energy of partition reflect the extent of interaction of the dye with the surfactants. Initially molecules of pollutants i.e. dye form ion pairs with ionic surfactants and, later on, the same is incorporated within micelle. Maximum value of free energy of partition ΔG_p has been found to be -55.49 kJmol^-1 and -50.43 kJmol in the presence of CPC and CTAB, respectively. The size of pollutant, thus, increases and, consequently, can be easily filtered. The effect of various factors i.e. concentration of surfactant, concentration of electrolyte (NaCl), transmembrane pressure, revolutions per minute (RPM) and pH, have been investigated to find the optimum conditions for maximum removal of PBM from aqueous system. The efficiency of MEUF has been assessed by calculating the values of rejection percentage and permeate flux. Both the surfactants were observed as strong candidates for PBM encapsulation but overall, maximum rejection percentage (R%) of 96.90% was attained by CPC.

Colloidal Synthesis of Metal Nanocrystals: From Asymmetrical Growth to Symmetry Breaking

Nanocrystals offer a unique platform for tailoring the physicochemical properties of solid materials to enhance their performances in various applications. While most work on controlling their shapes revolves around symmetrical growth, the introduction of asymmetrical growth and thus symmetry breaking has also emerged as a powerful route to enrich metal nanocrystals with new shapes and complex morphologies as well as unprecedented properties and functionalities. The success of this route critically relies on our ability to lift the confinement on symmetry by the underlying unit cell of the crystal structure and/or the initial seed in a systematic manner. This Review aims to provide an account of recent progress in understanding and controlling asymmetrical growth and symmetry breaking in a colloidal synthesis of noble-metal nanocrystals. With a touch on both the nucleation and growth steps, we discuss a number of methods capable of generating seeds with diverse symmetry while achieving asymmetrical growth for mono-, bi-, and multimetallic systems. We then showcase a variety of symmetry-broken nanocrystals that have been reported, together with insights into their growth mechanisms. We also highlight their properties and applications and conclude with perspectives on future directions in developing this class of nanomaterials. It is hoped that the concepts and existing challenges outlined in this Review will drive further research into understanding and controlling the symmetry breaking process.

A reverse Monte Carlo algorithm to simulate two-dimensional small-angle scattering intensities

Small-angle scattering (SAS) experiments are a powerful method for studying self-assembly phenomena in nanoscopic materials because of the sensitivity of the technique to structures formed by interactions on the nanoscale. Numerous out-of-the-box options exist for analysing structures measured by SAS but many of these are underpinned by assumptions about the underlying interactions that are not always relevant for a given system. Here, a numerical algorithm based on reverse Monte Carlo simulations is described to model the intensity observed on a SAS detector as a function of the scattering vector. The model simulates a two-dimensional detector image, accounting for magnetic scattering, instrument resolution, particle polydispersity and particle collisions, while making no further assumptions about the underlying particle interactions. By simulating a two-dimensional image that can be potentially anisotropic, the algorithm is particularly useful for studying systems driven by anisotropic interactions. The final output of the algorithm is a relative particle distribution, allowing visualization of particle structures that form over long-range length scales (i.e. several hundred nanometres), along with an orientational distribution of magnetic moments. The effectiveness of the algorithm is shown by modelling a SAS experimental data set studying finite-length chains consisting of magnetic nanoparticles, which assembled in the presence of a strong magnetic field due to dipole interactions.

Tracking Wormlike Micelle Formation in Solution: Unique Insight through Fluorescence Correlation Spectroscopic Study

Although worm-like micelles were invented 35 years ago, its formation pathway remains unclear. Inspired by the fact that a single molecular level experiment could provide meaningful and additional information, especially in a heterogeneous subpopulation, herein, we present a single molecular level study on the formation of wormlike micelles by cetyltrimethylammonium bromide (CTAB) and sodium salicylate (NaSal) in water. Our results indicated a coexistence of normal spherical micelles along with a big wormlike micelle in its formation path. More interestingly, we have two unique insights into the formation mechanism, which are inaccessible in ensemble averaged experiments: (i) at extremely low concentrations of the surfactant, [CTAB]/[NaSal] ∼ 0.06, the wormlike micelle attains the highest size; and (ii) the relative concentration of wormlike micelles is highest when [CTAB]/[NaSal] ∼ 2.

Effect of Morphologically Controlled Hematite Nanoparticles on the Properties of Fly Ash Blended Cement

Several types of hematite nanoparticles (α-Fe₂O₃) have been investigated for their effects on the structure and properties of fly ash (FA) blended cement. All synthesized nanoparticles were found to be of spherical shape, but of different particle sizes ranging from 10 to 195 nm depending on the surfactant used in their preparation. The cement hydration with time showed 1.0% α-Fe₂O₃ nanoparticles are effective accelerators for FA blended cement. Moreover, adding α-Fe₂O₃ nanoparticles in FA blended cement enhanced the compressive strength and workability of cement. Nanoparticle size and size distribution were important for optimal filling of various size of pores within the cement structure.

Micro-mesoporous submicron silica particles with pore size tunable in a wide range: synthesis, properties and prospects for LED manufacturing

An approach has been developed that allows the synthesis of submicron spherical silica particles with a controlled micro-mesoporous structure possessing a large specific surface area (up to 1300 m²g^-1). Particle synthesis is carried out by the hydrolysis of a mixture of various organosilanes mostly associated either with CTAB or with each other. A change in the concentration of CTAB in the reaction mixture apparently leads to a change in the formation mechanism of nuclei for the silica particle growth, which allows for varying the diameter of the synthesized particles in the range from 40-450 nm. The effect of the composition of the silica precursor ([3-(methacryloyloxy)propyl]trimethoxysilane, (3-aminopropyl)triethoxysilane and tetraethoxysilane) on the formation process and porosity of the resulting particles is studied. It was shown that by simply varying the ratio of organosilanes in the composition of the precursor, one can control the pore diameter of the particles in a wide range from 0.6-15 nm. The large-pore (up to 15 nm) silica particles are used as a matrix for the spatial distribution of luminescent carbon dots. The incorporation of carbon dots into SiO₂particles prevents their aggregation leading to emission quenching after drying, thus allowing us to obtain highly luminescent composite particles. LEDs based on the obtained composite material show bright visible luminescence with spectral characteristics similar to that of a commercial cold white LED.

Complex by design: Hydrotrope-induced micellar growth in deep eutectic solvents

HYPOTHESIS

The self-assembly of ionic surfactants in deep eutectic solvents has recently been demonstrated, opening up new possibilities in terms of the development of formulated products and templating of nanostructured materials. As it occurs in an aqueous environment, the solvophobic effect drives the formation of micelles in these solvents and specific-ion interactions alter the resulting structures. We hypothesized that the presence of hydrotropic salts would greatly affect the micellar structure in deep eutectic solvents, ultimately leading to the formation of worm-like aggregates.

EXPERIMENTS

A systematic investigation performed on hydrotrope-surfactant assemblies in neat and hydrated 1:2 choline chloride:glycerol is presented. The effect of choline salicylate on the micellization of hexadecyltrimethylammonium chloride at different hydrotrope-to-surfactant ratios was probed by contrast variation small-angle neutron scattering.

FINDINGS

Here the first investigation on salt-induced micellar growth in deep eutectic solvents is presented. The microscopic characterization of the system shows that the micelle-hydrotrope interaction in pure and hydrated deep eutectic solvents results in a significant increase in micelle elongation. The condensation of the hydrotrope on the micelle, which alters the effective monomer packing, leads to the formation of worm-like micelles with tunable morphology and flexibility. The results presented here present new possibilities in terms of self-assembly and co-assembly in neoteric solvents, where micelle morphology can be controlled through surfactant-salt interactions.

In Situ Nanostructural Analysis of Concentrated Wormlike Micellar Fluids Comprising Sodium Laureth Sulfate and Cocamidopropyl Betaine Using Small-Angle Neutron Scattering

Concentrated wormlike micellar fluids form the basis for a vast array of formulated products, from liquid soaps and shampoos to drag reduction and drilling fluids. Typically, these systems are analyzed using bulk rheological measurements to determine their flow properties and cryo-microscopy to detect their nanostructure. Small-angle neutron scattering provides an opportunity to directly and nonperturbatively analyze nanostructure in situ but is complicated for concentrated systems by correlations from interparticle volume exclusion. Here, we use small-angle and ultra-small-angle neutron scattering to probe directly for the first time the nanostructure of concentrated wormlike micellar fluids composed of the widely used surfactant pair sodium laureth sulfate and cocamidopropyl betaine in aqueous electrolytes. Obtained data are analyzed using different approaches to determine scattering contributions from the wormlike particles themselves and interactions between them. It is found that approximating worms as locally rigid cylinders offers some insight into their aggregation dimensions at short length scales, and both volume exclusion and screened Coulombic interaction potentials describe interactions reasonably well. Using the semi-empirical polymer reference interaction site model (PRISM) gives excellent agreement with observed scattering, and physical insight obtained using this approach is discussed in detail. A drawback of this method is the significant complexity in coding the model in order to fit data, so to facilitate this for future researchers, we provide with this paper a fully operational, open-source code to utilize this model.

Bubble Coalescence at Wormlike Micellar Solution-Air Interfaces

Surfactants in aqueous solutions self-assemble in the presence of salt, to form long, flexible, wormlike micelles (WLM). WLM solutions exhibit viscoelastic properties and are used in many applications, such as for cosmetic products, drag reduction, and hydraulic fracturing. Understanding the coalescence stability of bubbles in WLM solutions is important for the development of WLM based products that require a stable dispersion of bubbles. In this paper, we investigate the thin film drainage dynamics leading up to the coalescence of bubbles at flat WLM solution-air interfaces. The salts and surfactant type and concentrations were chosen so as to have the viscoelastic properties of the tested WLM solutions span over 2 orders of magnitude in moduli and relaxation times. The various stages in drainage and coalescence, the formation of a thick region at the apex (a dimple), the thinning and washout of this dimple, and the final stages of drainage before rupture, are modified by the viscoelasticity of the wormlike micellar solutions. As a result of the unique viscoelastic properties of the WLM solutions, we also observe a number of interesting fluid dynamic phenomena during the drainage processes including elastic recoil, thin film ripping, and single-step terminal drainage.

Dynamic Surface Tension of Surfactants in the Presence of High Salt Concentrations

We study the influence of high NaCl concentrations on the equilibrium and dynamic surface tensions of ionic (CTAB) and nonionic (Tween 80) surfactant solutions. Equilibrium surface tension measurements show that NaCl significantly reduces the critical micellar concentration (CMC) of CTAB but has no effect on the CMC of Tween 80. Dynamic surface tension measurements allow comparing the surface tension as a function of time for pure surfactant solutions and in the presence of NaCl. For the ionic surfactant, the dynamics agree with the usual diffusion-limited interfacial adsorption kinetics; however, the kinetics become orders of magnitude slower when NaCl is present. Sum-frequency generation spectroscopy experiments and the equilibrium adsorption measurements show that the presence of NaCl in CTAB solution leads to the formation of ion pairs at the surface, thereby neutralizing the charge of the head group of CTAB. This change, however, is not able to account for the slowing down of adsorption dynamics; we find that it is rather the decreases in the monomer concentration (CMC) in the presence of salt which has the major influence. For the nonionic surfactant, the kinetics of interfacial tension is seen to be already very slow, and the addition of salt does not influence it further. This also correlates very well to the very low CMC of Tween 80.

Thermal property and shear wave speed indicators of phase transitions in a micellar fluid

High concentration (>100 mM) wormlike micellar (WM) fluids are non-Newtonian with micelle lengths in the tens of nanometers. The viscoelastic properties of the fluid are affected by the structure and entanglement of the micelles and thus structural phase transitions can be indirectly studied using mechanical shear waves. Although these structural phase transitions have been extensively studied as a function of concentration, comparably less work is available on the temperature dependence. In this study, shear wave speeds (SWS) were studied as a function of temperature in a cetyltrimethylammonium bromide (CTAB) and sodium salicylate (NaSal)-based wormlike micellar fluid as an indicator of micellar structural changes. The heat capacity and thermal conductivity were also measured as these can be expected to change with structural phase transitions. Discontinuities in SWS were observed between 12 °C and 14 °C indicating the existence of a possible structural phase transition at this temperature. Gradual variation of the thermal properties was observed during controlled heating and cooling, while during autonomous heating from crystallization to fluid, a dramatic increase in both thermal properties peaking near 13.5 °C was observed.

Impact of Aromatic Counter-Ions Charge Delocalization on the Micellization Behavior of Surface-Active Ionic Liquids

The nature of counter-ions governs the micellar and structural characteristics of surface-active ionic liquids (SAILs). Especially, the introduction of aromatic counter-ions significantly increases their surface adsorption and induces the formation of various types of aggregates like prolate ellipsoidal micelles, rodlike micelles, vesicles, lamellars, etc. The present study reports the role of charge delocalization of two different aromatic counter-ions in the micellization behavior of their respective SAILs in aqueous medium. For this purpose, we have synthesized two SAILs, namely, 1-tetradecyl-3-methylimidzolium phenolate [C₁₄mim][PO] and 1-tetradecyl-3-methylimidzolium benzoate [C₁₄mim][BZ]. The O-atom of phenolate (PO^-) possesses negative charge, which is delocalized on its phenyl ring. Conversely, the negative charge of benzoate (BZ^-) is not delocalized on its phenyl ring. The more hydrophobic BZ^- counter-ion increases the hydrophobic interactions and reduces the electrostatic repulsions more efficiently as compared to PO^-, which results in a lower critical micelle concentration (cmc) of [C₁₄mim][BZ] than that of [C₁₄mim][PO]. Interfacial properties obtained by tensiometry reveal better surface activity and absorption efficiency of [C₁₄mim][BZ] as compared to [C₁₄mim][PO]. The increase of cmc and degree of counter-ion binding (β) with the rise of temperature for both SAILs has been observed by conductometry. The decrease in the polarity of pyrene microenvironment explains the higher compactness of [C₁₄mim][BZ] aggregates than that of [C₁₄mim][PO], observed by fluorimetry. The position of PO^- and BZ^- is in the stern and palisade layers of C₁₄mim⁺ aggregates, respectively, located by ¹H NMR. The existence of prolate ellipsoidal micelles for both SAILs has been established by small-angle neutron scattering measurements. Thus, the interfacial and bulk properties of [C₁₄mim][PO] lie somewhere in between those of the SAILs having perfect aromatic counter-ions, [C₁₄mim][BZ], and the SAILs having regular inorganic counter-ions like Cl^-, Br^-, etc.

Dynamic Landscape in Self-Assembled Surfactant Aggregates

A process in which a disordered system of pre-existing molecules generates an organized structure through specific, local interactions among the molecules themselves is termed molecular self-assembly. Micelles, microemulsions, and vesicles are examples of such self-assembled systems where amphiphilic molecules are involved. As the functional properties of these systems (such as wetting and emulsification, release of solubilized drugs, etc.) are dictated by the dynamic behavior of the surfactants at the molecular level, it is of immense interest to investigate these systems for the same. The dynamics in soft matter systems is quite complex, involving different time and length scales. We used a combination of neutron scattering and molecular dynamics simulation studies in probing the dynamic landscape in various self-assembled surfactant aggregates. Neutron scattering experiments were carried out using several spectrometers covering a wide dynamic range to probe motions on different time scales. The interaction between the surfactants can be varied by changing the molecular architecture, counterion concentration, temperature, and so forth. It is important to study the effect of these parameters on the dynamics of surfactants in these aggregates. We have carried out experiments on various ionic (anionic as well as cationic) micelles with varied counterion concentrations, vesicles, and lipid bilayers to unravel the complex dynamic features present in these systems. In this feature article, we will discuss some important results of our recent work on dynamics in these self-assembled surfactant aggregates.

Structural properties of the evolution of CTAB/NaSal micelles investigated by SANS and rheometry

Surfactants are amphiphilic molecules that spontaneously self-assemble in aqueous solution into various ordered and disordered phases. Under certain conditions, one-dimensional structures in the form of long, flexible wormlike micelles can develop. Cetyltrimethylammonium bromide (CTAB) is one of the most widely studied surfactants, and in the presence of sodium salicylate (NaSal), wormlike micelles can form at very dilute concentrations of surfactant. We carry out a systematic study of the structures of CTAB/NaSal over a surfactant concentration range of 2.5-15 mM and at salt-to-surfactant molar ratios of 0.5-10. Using small-angle neutron scattering (SANS), we qualitatively and quantitatively characterize the equilibrium structures of CTAB/NaSal, mapping the phase behavior of CTAB/NaSal at low concentrations within the region of phase space where nascent wormlike micelles transition into long and entangled structures. Complementary rheological assessments not only demonstrate the significant influence of the inter-micellar Coulombic interaction on the micellar structure but also suggest the potential existence of a hierarchical structure which is beyond the accessibility of the SANS technique.

Monitoring the death of single BaF3 cells under plasmonic photothermal heating induced by ultrasmall gold nanorods

Morphological changes and trypan-blue staining are temporally tracked in single cells via optical microscopy after plasmonic photothermal heating.

Demonstration of a Novel Charge-Free Reverse Wormlike Micelle System

We demonstrate a novel charge-free reverse wormlike micelle (RWLM) consisting of a ternary mixture of a nonionic amphiphilic block copolymer, fatty acid alkyl ester oil, and water under ambient conditions. Nonionic amphiphile tetra-[poly(oxyethylene)-poly(oxybutylene)]pentaerythrityl ether (TEBPE) self-assembled into spheroid-type micelles in nonaqueous media isopropyl myristate (IPM) with viscosity comparable to that of IPM. The addition of water increases viscosity only slightly up to a certain concentration of water and then drastically, demonstrating the sphere-to-wormlike micelle transition as confirmed by small-angle X-ray scattering. Further increase in water decreases the viscosity after attaining a maximum value. The zero shear viscosity (η₀) of the 10 wt % TEBPE/IPM system reached the maximum at 2.6 wt % water and ca. 56 Pa·s, which is ∼fivefold higher than that of water. Dynamic rheological measurements on the highly viscous solutions confirmed the viscoelastic behavior and could be described by the Maxwell model. Conductivity, measured in the presence of a conductive probe, 1-ethyl-3-methylimidazolium tetrafluoroborate, was found to be higher for viscous samples compared to the nonviscous samples, suggesting the static percolation caused by the RWLM formation. Decrease in η₀ and conductivity beyond a maximum suggests the shortening of reverse micelles. A similar behavior has been observed in other fatty acid alkyl ester oils of different alkyl chain lengths. Note that most of the RWLM systems previously reported are based on phosphatidylcholine (PC). Formulation and structure-properties related to non-PC-based RWLMs have been rarely explored. Non-PC-based RWLMs using chemically stable and low-cost synthetic molecules can be applied not only in pharmaceuticals and cosmetics but also in a wide range of applications including drag reduction agents for nonaqueous fluids and as a template for nanomaterial synthesis.

Anion Exchange on Cationic Surfactant Micelles, and a Speciation Model for Estimating Anion Removal on Micelles during Ultrafiltration of Water

Surfactant micelles combined with ultrafiltration can partially, or sometimes nearly completely, separate various ionic and nonionic pollutants from water. To this end, the selectivity of aqueous micelles composed of either cetyltrimethylammonium (CTA⁺) bromide or cetylpyridinium (CP⁺) chloride toward many environmentally relevant anions (IO₃^-, F^-, Cl^-, HCO₃^-, NO₂^-, Br^-, NO₃^-, H₂PO₄^-, HPO₄^2-, SO₄^2-, and CrO₄^2-) was investigated. Selectivity coefficients of CTA⁺ micelles (with respect to Br^-) and CP⁺ micelle (with respect to Cl^-) for these anions were evaluated using a simple thermodynamic ion exchange model. The sequence of anion affinity for the CTA⁺ micelles and for the CP⁺ micelles were the same, with decreasing affinity occurring in the order of: CrO₄^2- > SO₄^2- > HPO₄^2- > NO₃^- > Br^- > NO₂^- > Cl^- > HCO₃^- > H₂PO₄^- ≈ F^-. From the associated component mass balance and ion exchange (i.e., mass action) equations, an overall speciation model was developed to predict the distribution of all anions between the aqueous and micellar pseudophase for complex ionic mixtures. Experimental results of both artificial and real surface waters were in good agreement to model predictions. Further, the results indicated that micelles combined with ultrafiltration may be a potential technology for nutrient and other pollutant removal from natural or effluent waters.

Effects of Hydrotropic Salt on the Nanoscopic Dynamics of DTAB Micelles

Effects of a hydrotropic salt, sodium salicylate (NaSal), on the dynamic behavior of cationic dodecyltrimethylammonium bromide (DTAB) micelles as studied using dynamic light scattering (DLS) and quasielastic neutron scattering (QENS) techniques are reported here. DLS study showed that the addition of NaSal leads to a decrease in the apparent diffusion coefficient of the whole micelle indicating micellar growth. QENS data analysis suggested that observed dynamics involves two distinct motions, lateral motion of the surfactant over the curved micellar surface and localized segmental motion of the surfactant. It is found that the addition of NaSal slows down the lateral motion of DTAB while the localized segmental motion of the DTAB chain is not affected much. An atomistic molecular dynamics (MD) simulation was performed to gain further insight into the underlying phenomena. MD simulation results are found to be consistent with the experimental observations. MD simulation revealed that location of the salicylate ions on the micellar surface and their strong electrostatic association with their oppositely charged surfactant headgroup are the major factors in slowing down the lateral motion of the DTAB molecule. In the present work, a quantitative description of the effects of NaSal on the nanoscopic dynamics of DTAB micelles and its correlation with the microstructure of the micelle is provided.

Intermicellar Interactions and the Viscoelasticity of Surfactant Solutions: Complementary Use of SANS and SAXS

In ionic surfactant micelles, basic interactions among distinct parts of surfactant monomers, their counterion, and additives are fundamental to tuning molecular self-assembly and enhancing viscoelasticity. Here, we investigate the addition of sodium salicylate (NaSal) to hexadecyltrimethylammonium chloride and bromide (CTAC and CTAB) and 1-hexadecylpyridinium chloride and bromide (CPyCl and CPyBr), which have distinct counterions and headgroup structures but the same hydrophobic tail. Different contrasts are obtained from small-angle neutron scattering (SANS), which probes differences between the nucleus of atoms, and X-rays SAXS, which probes differences in electron density. If combined, this contrast allows us to define specific intramicellar length scales and intermicellar interactions. SANS signals are sensitive to the contrast between the solvent (D₂O) and the hydrocarbonic tails in the micellar core (hydrogen), and SAXS can access the inner structure of the polar shell because the headgroups, counterions, and penetrated salt have higher electron densities compared to the solvent and to the micellar core. The number density, intermicellar distances, aggregation number, and inter/intramicellar repulsions are discussed on the basis of the dependence of the structure factor and form factor on the micellar aggregate morphology. Therefore, we confirm that micellar growth can be tuned by variations in the flexibility and size of the the headgroup as well as the ionic dissociation rate of its counterion. Additionally, we show that the counterion binding is even more significant to the development of viscoelasticity than the headgroup structure of a surfactant molecule. This is a surprising finding, showing the importance of electrostatic charges in the self-assembly process of ionic surfactant molecules.

Electron paramagnetic resonance and transmission electron microscopy study of the interactions between asbestiform zeolite fibers and model membranes

Different asbestiform zeolite fibers of the erionite (termed GF1 and MD8, demonstrated carcinogenic) and offretite (termed BV12, suspected carcinogenic) families were investigated by analyzing the electron paramagnetic resonance (EPR) spectra of selected surfactant spin probes and transmission electron microscopy (TEM) images in the presence of model membranes-cetyltrimethylammonium (CTAB) micelles, egg-lecithin liposomes, and dimyristoylphosphatidylcholine (DMPC) liposomes. This was undertaken to obtain information on interactions occurring at a molecular level between fibers and membranes which correlate with entrance of fibers into the membrane model or location of the fibers at the external or internal membrane interfaces. For CTAB micelles, all fibers were able to enter the micelles, but the hair-like structure and chemical surface characteristics of GF1 modified the micelle structure toward a bilayer-like organization, while MD8 and BV12, being shorter fibers and with a high density of surface interacting groups, partially destroyed the micelles. For liposomes, GF1 fibers partially penetrated the core solution, but DMPC liposomes showed increasing rigidity and organization of the bilayer. Conversely, for MD8 and BV12, the fibers did not cross the membrane demonstrating a smaller membrane structure perturbation. Scolecite fibers (termed SC1), used for comparison, presented poor interactions with the model membranes. The carcinogenicity of the zeolites, as postulated in the series SC1<BV12<MD8<GF1, may be related to the structural modifications of the model membranes when interacting with these zeolite fibers.

The role of the binding salt sodium salicylate in semidilute ionic cetylpyridinium chloride micellar solutions: a rheological and scattering study

The viscosity varies as a consequence of binding, first, and screening, later, action of the penetrating salt.

Hydrotrope induced structural modifications in CTAB/butanol/water/isooctane reverse micellar systems

SAXS and NMR studies to gain insight of structural alterations in reverse micellar nanotemplates in presence of hydrotropes.