Novel synthesis of stable polypyrrole nanospheres using ozone

Morphology and size control of an amorphous conjugated polymer network containing quinone and pyrrole moieties via precipitation polymerization

Morphology and size control of insoluble and infusible conjugated polymers are significant for their applications. Development of a precipitation polymerization route without using a surface stabilizer is preferred to control the reaction, morphology, and size. In the present work, precipitation polymerization for an amorphous conjugated polymer network, a new type of polymerized structure containing functional units, was studied for the size and morphology control in the solution phase at low temperature. The random copolymerization of benzoquinone (BQ) and pyrrole (Py) monomers formed microspheres of the BQ-Py network polymers as the precipitates in the solution phase. The particle diameter was controlled in the range of 70 nm and 1 μm by changing the pH of the solution and concentration of the monomers. The resultant nanoparticles were applied to a metal-free electrocatalyst for the hydrogen evolution reaction (HER). The catalytic activity of the BQ-Py nanoparticles was higher than that of the bulk micrometer-sized particles. The results imply that the morphology and size of amorphous conjugated polymer networks can be controlled by precipitation polymerization.

Colloidally Stable Polypyrrole Nanoparticles Synthesized by Surfactant-Free Coupling Polymerization

Surfactant-free polypyrrole (PPy) nanoparticles, which were colloidally stable in aqueous medium, were successfully synthesized by coupling polymerization of pyrrole using Fe(NO3)3 solids in the absence of any colloidal stabilizer. The pyrrole monomers were gradually supplied from the vapor phase, and the coupling reaction of the monomers could proceed to generate PPy in a water medium. The resulting PPy nanoparticles were extensively characterized in terms of diameter, bulk chemical composition, surface chemistry, and colloidal stability by dynamic light scattering, electron microscopy, elemental microanalysis, Fourier transform infrared spectroscopy, Raman spectroscopy, electrophoresis, and X-ray photoelectron spectroscopy. The characterization results indicated that the PPy nanoparticles can be colloidally stable based on the electrostatic stabilization mechanism due to cationic charges generated on the PPy molecules by doping during the polymerization. General chemical oxidative polymerization in aqueous medium using the Fe(NO3)3 oxidant without a colloidal stabilizer as a control experiment resulted in generation of atypical PPy aggregates with over a micrometer size, indicating that the polymerization at low ionic strength is essential for colloidal particle formation. Finally, it was demonstrated that the PPy nanoparticles worked as a surfactant-free black-colored particulate emulsifier by adsorption at the oil-water interface to stabilize Pickering-type oil-in-water emulsions.

Polypyrrole Nanomaterials: Structure, Preparation and Application

In the past decade, nanostructured polypyrrole (PPy) has been widely studied because of its many specific properties, which have obvious advantages over bulk-structured PPy. This review outlines the main structures, preparation methods, physicochemical properties, potential applications, and future prospects of PPy nanomaterials. The preparation approaches include the soft micellar template method, hard physical template method and templateless method. Due to their excellent electrical conductivity, biocompatibility, environmental stability and reversible redox properties, PPy nanomaterials have potential applications in the fields of energy storage, biomedicine, sensors, adsorption and impurity removal, electromagnetic shielding, and corrosion resistant. Finally, the current difficulties and future opportunities in this research area are discussed.

Antibiofilm and antimicrobial efficacy evaluation of polypyrrole nanotubes embedded in aminated gum acacia based nanocomposite

The sustainable development of natural polysaccharide-based hybrid composites is highly important for the effective replacement of metal nanoparticles in diverse applications. Here, polypyrrole nanotubes (PPyNTs) were embedded on the surface of aminated gum acacia (AGA) to produce ecofriendly nanocomposites for biomedical applications. The morphology of a PPyNT-enhanced AGA (PPyNT@AGA) hybrid nanocomposite was studied by scanning electron microscopy and transmission electron microscopy and their affirmed interactions were characterised by X-ray diffraction, Raman, Fourier transform-infrared and UV-visible spectroscopy. Interestingly, the prepared PPyNT@AGA nanocomposite exhibited 90% biofilm inhibition against gram-negative Pseudomonas aeruginosa, gram-positive Streptococcus pneumoniae and fungal strain Candida albicans with promising antimicrobial performance. This study establishes the good inhibition of a PPyNT@AGA hybrid composite against various microorganisms. The stability of the nanocomposite coupled with antimicrobial activity enables an effective strategy for diagnosing and controlling pathogens.

Interactive Studies on Synthetic Nanopolymer decorated with Edible Biopolymer and its Selective Electrochemical determination of L-Tyrosine

Herein, an edible biopolymer amine Modified Gum Acacia (MGA), successfully encumbered with Electron Beam irradiated Polypyrrole Nanospheres (EB-PPy NSs), was investigated for the effective role in L-Tyrosine (Tyr) biosensing application. The morphology of EB-PPy NSs decorated MGA (EB-PPy/MGA) hybrid nanobiocomposite has been studied by Scanning electron microscopy and its affirmed interactions were characterized by X-ray diffraction, Raman, FT-IR spectroscopy, UV-Visible spectroscopy, Thermo Gravimetric Analysis and Vibrating Sample Magnetometer. The hybrid nanobiocomposite manifested diamagnetic behavior with reduced saturation magnetization (Ms = 1.412 × 10-4 emu/g) to produce more adhesive surface. Amine chains in EB-PPy NSs and hydroxyl groups of MGA contributed to effective immobilization, thus enabling suitable orientation for Tyr determination. The electrochemical analysis illustrated that the proposed nanobiocomposite based sensor exhibited an excellent electrocatalytic activity toward selective determination of Tyr in the linear range of 0.4 to 600 µM with a lower detection limit of 85 nM, low oxidation potential of 0.72 V and good selectivity. Finally, the reliability of the constructed EB-PPy/MGA for Tyr detection was demonstrated in real samples.

Nanocomposite based on restacked crystallites of β-NiS and Ppy for the determination of theophylline and uric acid on screen-printed electrodes

We synthesized calcinated β-NiS with a highly crystalline porous nature and mixed it with Ppy to prepare a nanocomposite, which exhibited high electrocatalytic activity and this was then used to detect theophylline and uric acid with high sensitivity and stability.

Radiolytic method as a novel approach for the synthesis of nanostructured conducting polypyrrole

In this study, a novel and extremely facile method for the synthesis of conducting polypyrrole (PPy) was achieved in aqueous solution. This radiolytic method is totally free of template and environmentally friendly compared with traditional chemical methods. According to ultraviolet-visible (UV-vis) spectroscopy and Fourier transform infrared (FTIR) spectroscopy analysis, pyrrole (Py) monomers were polymerized into PPy thanks to their oxidation by HO(•) radicals produced by the radiolysis of water when exposed to γ irradiation. The morphology of PPy was characterized by cryo-transmission electron microscopy (cryo-TEM) in aqueous solution and by scanning electron microscopy (SEM) after deposition. In an original way, high-resolution atomic force microscopy, coupled with infrared nanospectroscopy, was used to probe the local chemical composition of PPy nanostructures. The results demonstrated that spherical and chaplet-like PPy nanostructures were formed by γ-radiolysis. Thermogravimetric analysis (TGA) and electronic conductivity measurements showed that radiosynthesized PPy had good thermal stability and an electrical conductivity higher than that of chemically synthesized PPy.

Aptamer-functionalized hybrid carbon nanofiber FET-type electrode for a highly sensitive and selective platelet-derived growth factor biosensor

Precise selectivity and rapid responses to target biomolecules are important in the development of biosensors. In particular, highly sensitive and selective biosensors have been used in clinical treatment to detect factors such as cancer oncoproteins and endocrine disruptors. Herein, highly sensitive liquid electrolyte field-effect transistor (FET) system biosensors were fabricated to detect platelet-derived growth factor (PDGF) using a PDGF-B binding aptamer conjugated with carboxylic polypyrrole-coated metal oxide-decorated carbon nanofibers (CPMCNFs) as the signal transducer. First, CPMCNFs were fabricated using vapor deposition polymerization (VDP) of the carboxylic pryrrole monomer (CPy) on metal oxide-decorated carbon nanofiber (MCNF) surfaces with no treatment for carbon surface functionalization. Furthermore, a 3 nm thick uniformly coated carboxylic polypyrrole (CPPy) layer was formed without aggregation. The CPMCNFs were integrated with the PDGF-B binding aptamer and immobilized on the interdigitated array substrate by covalent anchoring to produce a FET-type biosensor transducer. The PDGF-B binding aptamer conjugated CPMCNF (CPB-Apt) FET sensor was highly sensitive (5 fM) and extremely selective for isoforms of PDGFs. Additionally, the CPB-Apt FET sensor could be reused over a few weeks.