Calcium ions to cross-link supramolecular nanofibers to tune the elasticity of hydrogels over orders of magnitude

A Biomimetic Peptide-drug Supramolecular Hydrogel as Eyedrops Enables Controlled Release of Ophthalmic Drugs

The rapid clearance of instilled drugs from the ocular surface due to tear flushing and excretion results in low drug bioavailability, necessitating the development of new drug delivery routes. Here, we generated an antibiotic hydrogel eye drop that can extend the pre-corneal retention of a drug after topical instillation to address the risk of side effects (e.g., irritation and inhibition of enzymes), resulting from frequent and high-dosage administrations of antibiotics used to obtain the desired therapeutic drug concentration. The covalent conjugation of small peptides to antibiotics (e.g., chloramphenicol) first endows the self-assembly ability of peptide-drug conjugate to generate supramolecular hydrogels. Moreover, the further addition of calcium ions, which are also widely present in endogenous tears, tunes the elasticity of supramolecular hydrogels, making them ideal for ocular drug delivery. The in vitro assay revealed that the supramolecular hydrogels exhibited potent inhibitory activities against both gram-negative (e.g., Escherichia coli) and gram-positive (e.g., Staphylococcus aureus) bacteria, whereas they were innocuous toward human corneal epithelial cells. Moreover, the in vivo experiment showed that the supramolecular hydrogels remarkably increased pre-corneal retention without ocular irritation, thereby showing appreciable therapeutic efficacy for treating bacterial keratitis. This work, as a biomimetic design of antibiotic eye drops in the ocular microenvironment, addresses the current issues of ocular drug delivery in the clinic and further provides approaches to improve the bioavailability of drugs, which may eventually open new directions to resolve the difficulty of ocular drug delivery. STATEMENT OF SIGNIFICANCE: Herein, we present a biomimetic design for antibiotic hydrogel eye drops mediated by calcium ions (Ca²⁺) in the ocular microenvironment, which can extend the pre-corneal retention of antibiotics after topical instillation. The mediation of Ca²⁺ which is widely present in endogenous tears, tunes the elasticity of hydrogels, making them ideal for ocular drug delivery. Since increasing the ocular retention of antibiotic eye drops enhances its action and reduces its adverse effects, this work may lead to an approach of peptide-drug-based supramolecular hydrogel for ocular drug delivery in clinics to combat ocular bacterial infections.

Fmoc-diphenylalanine gelating nanoarchitectonics: A simplistic peptide self-assembly to meet complex applications

9-fluorenylmethoxycarbonyl-diphenylalanine (Fmoc-FF), has been has been extensively explored due to its ultrafast self-assembly kinetics, inherent biocompatibility, tunable physicochemical properties, and especially, the capability of forming self-sustained gels under physiological conditions. Consequently, various methodologies to develop Fmoc-FF gels and their corresponding applications in biomedical and industrial fields have been extensively studied. Herein, we systemically summarize the mechanisms underlying Fmoc-FF self-assembly, discuss the preparation methodologies of Fmoc-FF hydrogels, and then deliberate the properties as well as the diverse applications of Fmoc-FF self-assemblies. Finally, the contemporary shortcomings which limit the development of Fmoc-FF self-assembly are raised and the alternative solutions are proposed, along with future research perspectives.

Ca2+ and Ag+ orient low-molecular weight amphiphile self-assembly into "nano-fishnet" fibrillar hydrogels with unusual β-sheet-like raft domains

Low-molecular weight gelators (LMWGs) are small molecules (M_w < ∼1 kDa), which form self-assembled fibrillar network (SAFiN) hydrogels in water when triggered by an external stimulus. A great majority of SAFiN gels involve an entangled network of self-assembled fibers, in analogy to a polymer in a good solvent. In some rare cases, a combination of attractive van der Waals and repulsive electrostatic forces drives the formation of bundles with a suprafibrillar hexagonal order. In this work, an unexpected micelle-to-fiber transition is triggered by Ca²⁺ or Ag⁺ ions added to a micellar solution of a novel glycolipid surfactant, whereas salt-induced fibrillation is not common for surfactants. The resulting SAFiN, which forms a hydrogel above 0.5 wt%, has a "nano-fishnet" structure, characterized by a fibrous network of both entangled fibers and β-sheet-like rafts, generally observed for silk fibroin, actin hydrogels or mineral imogolite nanotubes, but not known for SAFiNs. The β-sheet-like raft domains are characterized by a combination of cryo-TEM and SAXS and seem to contribute to the stability of glycolipid gels. Furthermore, glycolipid is obtained by fermentation from natural resources (glucose, rapeseed oil), thus showing that naturally engineered compounds can have unprecedented properties, when compared to the wide range of chemically derived amphiphiles.

Cation-Induced Fibrillation of Microbial Glycolipid Biosurfactant Probed by Ion-Resolved In Situ SAXS

Biological amphiphiles are molecules with a rich phase behavior. Micellar, vesicular, and even fibrillar phases can be found for the same molecule by applying a change in pH or by selecting the appropriate metal ion. The rich phase behavior paves the way toward a broad class of soft materials, from carriers to hydrogels. The present work contributes to understanding the fibrillation of a microbial glycolipid, glucolipid G-C18:1, produced by Starmerella bombicola ΔugtB1 and characterized by a micellar phase at alkaline pH and a vesicular phase at acidic pH. Fibrillation and prompt hydrogelation is triggered by adding either alkaline earth, Ca²⁺, or transition metal, Ag⁺, Fe²⁺, Al³⁺, ions to a G-C18:1 micellar solution. A specifically designed apparatus coupled to a synchrotron SAXS beamline allows the performing of simultaneous cation- and pH-resolved in situ monitoring of the morphological evolution from spheroidal micelles to crystalline fibers, when Ca²⁺ is employed, or to wormlike aggregates, when Fe²⁺ or Al³⁺ solutions are employed. The fast reactivity of Ag⁺ and the crystallinity of Ca²⁺-induced fibers suggest that fibrillation is driven by direct metal-ligand interactions, while the shape transition from spheroidal to elongated micelles with Fe²⁺ or Al³⁺ rather suggest charge screening between the lipid and the hydroxylated cation species.

Hydrogen Bonding Stiffens Peptide Amphiphile Supramolecular Filaments by Aza-Glycine Residues

Peptide amphiphiles (PAs) are a class of molecules comprised of short amino acid sequences conjugated to hydrophobic moieties that may exhibit self-assembly in water into supramolecular structures. We investigate here how mechanical properties of hydrogels formed by PA supramolecular nanofibers are affected by hydrogen bond densities within their internal structure by substituting glycine for aza-glycine (azaG) residues. We found that increasing the number of PA molecules that contain azaG up to 5 mol% in PA supramolecular nanofibers increases their persistence length fivefold and decreases their diffusion coefficients as measured by fluorescence recovery after photobleaching. When these PAs are used to create hydrogels, their bulk storage modulus (G') was found to increase as azaG PA content in the supramolecular assemblies increases up to a value of 10 mol% and beyond this value a decrease was observed, likely due to diminished levels of nanofiber entanglement in the hydrogels as a direct result of increased supramolecular rigidity. Interestingly, we found that the bioactivity of the scaffolds toward dopaminergic neurons derived from induced pluripotent stem cells can be enhanced directly by persistence length independently of storage modulus. We hypothesize that this is due to interactions between the cells and the extracellular environment across different size scales: from filopodia adhering to individual nanofiber bundles to cell adhesion sites that interact with the hydrogel as a bulk substrate. Fine tuning of hydrogen bond density in self-assembling peptide biomaterials such as PAs provides an approach to control nanoscale stiffness as part of an overall strategy to optimize bioactivity in these supramolecular systems. supramolecular biomaterials. STATEMENT OF SIGNIFICANCE: Hydrogen bonding is an important driving force for the self-assembly of peptides in both biological and artificial systems. Here, we increase the amount of hydrogen bonding within self-assembled peptide amphiphile (PA) nanofibers by substituting glycine for an aza-glycine (azaG). We show that increasing the molar concentration of azaG increases the internal order of individual nanofibers and increases their persistence length. We also show that these changes are sufficient to increase survival and tyrosine hydroxylase expression in induced pluripotent stem cell-derived dopaminergic neurons cultured in 3D gels made of these materials. Our strategy of tuning the number of hydrogen bonds in a supramolecular assembly provides mechanical customization for 3D cell culture and tissue engineering.

Metal Cation Triggered Peptide Hydrogels and Their Application in Food Freshness Monitoring and Dye Adsorption

Metal-ligand interactions have emerged as an important tool to trigger and modulate self-assembly, and to tune the properties of the final supramolecular materials. Herein, we report the metal-cation induced self-assembly of a pyrene-peptide conjugate to form hydrogels. The peptide has been rationally designed to favor the formation of β-sheet 1D assemblies and metal coordination through the Glu side chains. We studied in detail the self-assembly process in the presence of H+, Li+, Na+, K+, Ca2+, Ni2+, Cu2+, Zn2+, Cd2+, Co2+, Fe3+, and Cr3+ and found that the morphology and mechanical properties of the hydrogels are ion-dependent. Moreover, thanks to the presence of the metal, new applications could be explored. Cu2+ metallogels could be used for amine sensing and meat freshness monitoring, while Zn2+ metallogels showed good selectivity for cationic dye adsorption and separation.

Elastin-inspired supramolecular hydrogels: a multifaceted extracellular matrix protein in biomedical engineering

The phenomenal advancement in regenerative medicines has led to the development of bioinspired materials to fabricate a biomimetic artificial extracellular matrix (ECM) to support cellular survival, proliferation, and differentiation. Researchers have diligently developed protein polymers consisting of functional sequences of amino acids evolved in nature. Nowadays, certain repetitive bioinspired polymers are treated as an alternative to synthetic polymers due to their unique properties like biodegradability, easy scale-up, biocompatibility, and non-covalent molecular associations which imparts tunable supramolecular architecture to these materials. In this direction, elastin has been identified as a potential scaffold that renders extensibility and elasticity to the tissues. Elastin-like polypeptides (ELPs) are artificial repetitive polymers that exhibit lower critical solution temperature (LCST) behavior in a particular environment than synthetic polymers and hence have gained extensive interest in the fabrication of stimuli-responsive biomaterials. This review discusses in detail the unique structural aspects of the elastin and its soluble precursor, tropoelastin. Furthermore, the versatility of elastin-like peptides is discussed through numerous examples that bolster the significance of elastin in the field of regenerative medicines such as wound care, cardiac tissue engineering, ocular disorders, bone tissue regeneration, etc. Finally, the review highlights the importance of exploring short elastin-mimetic peptides to recapitulate the structural and functional aspects of elastin for advanced healthcare applications.

Dehydropeptide Supramolecular Hydrogels and Nanostructures as Potential Peptidomimetic Biomedical Materials

Supramolecular peptide hydrogels are gaining increased attention, owing to their potential in a variety of biomedical applications. Their physical properties are similar to those of the extracellular matrix (ECM), which is key to their applications in the cell culture of specialized cells, tissue engineering, skin regeneration, and wound healing. The structure of these hydrogels usually consists of a di- or tripeptide capped on the N-terminus with a hydrophobic aromatic group, such as Fmoc or naphthalene. Although these peptide conjugates can offer advantages over other types of gelators such as cross-linked polymers, they usually possess the limitation of being particularly sensitive to proteolysis by endogenous proteases. One of the strategies reported that can overcome this barrier is to use a peptidomimetic strategy, in which natural amino acids are switched for non-proteinogenic analogues, such as D-amino acids, β-amino acids, or dehydroamino acids. Such peptides usually possess much greater resistance to enzymatic hydrolysis. Peptides containing dehydroamino acids, i.e., dehydropeptides, are particularly interesting, as the presence of the double bond also introduces a conformational restraint to the peptide backbone, resulting in (often predictable) changes to the secondary structure of the peptide. This review focuses on peptide hydrogels and related nanostructures, where α,β-didehydro-α-amino acids have been successfully incorporated into the structure of peptide hydrogelators, and the resulting properties are discussed in terms of their potential biomedical applications. Where appropriate, their properties are compared with those of the corresponding peptide hydrogelator composed of canonical amino acids. In a wider context, we consider the presence of dehydroamino acids in natural compounds and medicinally important compounds as well as their limitations, and we consider some of the synthetic strategies for obtaining dehydropeptides. Finally, we consider the future direction for this research area.

The pH- and salt-controlled self-assembly of [1]benzothieno[3,2-b][1]-benzothiophene–peptide conjugates in supramolecular hydrogels

Salt- and pH-triggered supramolecular hydrogels were obtained from a novel [1]benzothieno[3,2-b][1]benzothiophene (BTBT)-peptide hybrid.

Linker-Regulated H2S Release from Aromatic Peptide Amphiphile Hydrogels

Controlled release is an essential requirement for delivery of hydrogen sulfide (H₂S) because of its reactive nature, short half-life in biological fluids, and toxicity at high concentrations. In this context, H₂S delivery via hydrogels may be beneficial as they can deliver H₂S locally at the site of interest. Herein, we employed hydrogels based on aromatic peptide amphiphiles (APAs) with tunable mechanical properties to modulate the rates of H₂S release. The APAs contained an aromatic S-aroylthiooxime (SATO) H₂S donor attached with a linker to a short IAVEEE hexapeptide. Linker units included carbonyl, substituted O-methylenes, alkenyl, and alkyl segments with the goal of evaluating the role of linker structure on self-assembly, capacity for hydrogelation, and H₂S release rate. We studied each peptide by transmission electron microscopy, circular dichroism spectroscopy, and rheology, and we measured H₂S release rates from each gel, triggering SATO decomposition and release of H₂S by addition of cysteine (Cys). Using an H₂S-selective electrode probe as well as a turn-on fluorescent H₂S probe in the presence of H9C2 cardiomyocytes, we found that the rate of H₂S release from the hydrogels depended on the rate of Cys penetration into the nanofiber core with stiffer gels showing longer overall release.

Photo-crosslinkable elastomeric protein-derived supramolecular peptide hydrogel with controlled therapeutic CO-release

As an attempt to establish a method for efficient and safe administration of therapeutic carbon monoxide (CO) to the human body, supramolecular nanoplatforms incorporated with CO-releasing molecules (CORMs) have recently been developed. In particular, hydrogel scaffolds have attracted considerable attention due to the possibility of site-specific and controlled liberation of CO. However, it would be greatly beneficial to enhance the mechanical strength of hydrogels to widen their applicability in biomedical, pharmaceutical, and surgical sectors. Herein, we report a visible light-mediated crosslinkable supramolecular CO-releasing hydrogel (CORH), based on the fibrillar assembly of elastomeric protein-derived tyrosine-containing short peptides. A photo-driven dimerization of tyrosine moieties located on the fibrillar surface of CORH, accelerated by a Ru-based catalyst, results in the entanglement and bundling of nanofibrils that significantly increases the mechanical strength and stability of the CORH, which allows prolonged CO-liberation through limiting the contact of CORMs with water molecules. The contact probability of a CORM with water determined by the spatial position of the CORM on the fibrils containing a crosslinkable tyrosine moiety that affects CO-releasing behavior was confirmed by adjusting the CORM position closer to or farther from the tyrosine in the peptide sequence. A bulky CORM closely located to the tyrosine in a peptide inhibited the effective dityrosine formation of tyrosine on the fibril surface, resulting in loose bundling of nanofibrils in the CORH and facilitating the release of CO through the exchange with water. The photo-crosslinked CORH demonstrated a potent cytoprotective effect on oxidatively stressed cardiomyocytes, as expected. This work could provide a useful insight for the practical application of gasotransmitters as functional nanomaterials in pharmaceutical and biomedical fields.

Recent advances of self-assembling peptide-based hydrogels for biomedical applications

Peptide-based hydrogels have been proven to be preeminent biomedical materials due to their high water content, tunable mechanical stability, great biocompatibility and excellent injectability. The ability of peptide-based hydrogels to provide extracellular matrix-mimicking environments opens up opportunities for their biomedical applications in fields such as drug delivery, tissue engineering, and wound healing. In this review, we first describe several methods commonly used for the fabrication of robust peptide-based hydrogels, including spontaneous hydrogelation, enzyme-controlled hydrogelation and cross-linking-enhanced hydrogelation. We then introduce some representative studies on their applications in drug delivery and antitumor therapy, antimicrobial and wound healing materials, and 3D bioprinting and tissue engineering. We hope that this review facilitates the advances of hydrogels in biomedical applications.

An injectable dipeptide-fullerene supramolecular hydrogel for photodynamic antibacterial therapy

Photodynamic therapy (PDT) is a promising treatment against multiantibiotic-resistant bacteria with the advantage of a low tendency towards antibiotic resistance. Due to their high PDT efficiencies and superior chemical stabilities, fullerenes have been proposed as effective photosensitizers for the photodynamic inactivation of bacteria. However, the biomedical applications of fullerenes are hindered by their limited aqueous solubility and apparent tendency to undergo aggregation. Herein, we report a hybrid supramolecular hydrogel prepared by the peptide-modulated self-assembly of fullerenes for targeted and sustained photodynamic antibacterial therapy. Aggregation of the fullerene in the hydrogel is largely inhibited through the non-covalent interactions between the peptide and the fullerene. Consequently, the PDT efficiency of the peptide-fullerene hydrogel is highly improved as compared to the untreated fullerene. The incorporation of fullerene profoundly improves the mechanical properties of the hydrogel, making the peptide-fullerene hydrogel a better injectable formulation for biomedical applications. In vitro and in vivo antibacterial results indicate that the peptide-fullerene hydrogels can effectively inhibit multiantibiotic-resistant Staphylococcus aureus and promote wound healing. This study offers a promising paradigm to adapt self-assembling small peptides with integration of multiple functions for biomedical applications.

Understanding the Interplay between Self-Assembling Peptides and Solution Ions for Tunable Protein Nanoparticle Formation

Protein-based nanomaterials are gaining importance in biomedical and biosensor applications where tunability of the protein particle size is highly desirable. Rationally designed proteins and peptides offer control over molecular interactions between monomeric protein units to modulate their self-assembly and thus particle formation. Here, using an example enzyme-peptide system produced as a single construct by bacterial expression, we explore how solution conditions affect the formation and size of protein nanoparticles. We found two independent routes to particle formation, one facilitated by charge interactions between protein-peptide and peptide-peptide exemplified by pH change or the presence of NO₃^- or NH₄⁺ and the second route via metal-ion coordination ( e.g., Mg²⁺) within peptides. We further demonstrate that the two independent factors of pH and Mg²⁺ ions can be combined to regulate nanoparticle size. Charge interactions between protein-peptide monomers play a key role in either promoting or suppressing protein assembly; the intermolecular contact points within protein-peptide monomers involved in nanoparticle formation were identified by chemical cross-linking mass spectrometry. Importantly, the protein nanoparticles retain their catalytic activities, suggesting that their native structures are unaffected. Once formed, protein nanoparticles remain stable over long periods of storage or with changed solution conditions. Nevertheless, formation of nanoparticles is also reversible-they can be disassembled by desalting the buffer to remove complexing agents ( e.g., Mg²⁺). This study defines the factors controlling formation of protein nanoparticles driven by self-assembly peptides and an understanding of complex ion-peptide interactions involved within, offering a convenient approach to tailor protein nanoparticles without changing amino acid sequence.

Calcium ion coordinated dexamethasone supramolecular hydrogel as therapeutic alternative for control of non-infectious uveitis

Supramolecular hydrogels formed by the self-assembly of therapeutic agents have received considerable attention due to their high drug payload and carrier-free features. Herein, we constructed a dexamethasone sodium phosphate (Dex) supramolecular hydrogel in combination with Dex and calcium ion (Ca²⁺) and further demonstrated its therapeutic efficacy in the control of ocular inflammation. The developed supramolecular hydrogel was thoroughly characterized by rheology, TEM, FTIR and XRD. Calcium ions and Dex concentration had a marked influence on the sol-gel transition behaviour of hydrogel and the proposed Dex supramolecular hydrogel displayed thixotropic properties. The drug release rate from Dex supramolecular hydrogel was dependent on the Ca²⁺ concentration. In comparison with Dex aqueous solution, single intravitreal injections of Dex supramolecular hydrogel up to 30μg/eye were well tolerated without causing undesirable complications of fundus blood vessel tortuosity and lens opacity, as indicated by electroretinograms (ERGs), fundus photography and histopathology. Moreover, the administration by Dex supramolecular hydrogel exhibited a comparable anti-inflammatory efficacy to native Dex solution on an experimental autoimmune uveitis (EAU) model induced in Lewis rats with IRBP peptide and the therapeutic efficacy had in a dosage-dependent manner. Histological observation and cytokines measurements indicated that both Dex solution and Dex supramolecular hydrogel (30μg/eye) treatment could significantly attenuate the inflammatory response in both anterior and posterior chambers via the downregulation of Th1 and Th17 effector responses. All these data suggested that the developed Dex supramolecular hydrogel might be a therapeutic alternative for non-infectious uveitis with minimal risk of the induction of lens opacity and fundus blood vessel tortuosity.

STATEMENT OF SIGNIFICANCE

A facile ionic cross-linking strategy was exploited to construct a dexamethasone sodium phosphate (Dex) supramolecular hydrogel composed of Dex and calcium ion. Intravitreal injection of Dex hydrogel displayed excellent intraocular biocompatibility without causing the complications of fundus blood vessel tortuosity and lens opacity. More importantly, the proposed Dex hydrogel exhibited a comparative anti-inflammatory response to native Dex formulation on an experimental autoimmune uveitis (EAU) model via the downregulation of Th1 and Th17 effector responses.

Supramolecular biofunctional materials

This review discusses supramolecular biofunctional materials, a novel class of biomaterials formed by small molecules that are held together via noncovalent interactions. The complexity of biology and relevant biomedical problems not only inspire, but also demand effective molecular design for functional materials. Supramolecular biofunctional materials offer (almost) unlimited possibilities and opportunities to address challenging biomedical problems. Rational molecular design of supramolecular biofunctional materials exploit powerful and versatile noncovalent interactions, which offer many advantages, such as responsiveness, reversibility, tunability, biomimicry, modularity, predictability, and, most importantly, adaptiveness. In this review, besides elaborating on the merits of supramolecular biofunctional materials (mainly in the form of hydrogels and/or nanoscale assemblies) resulting from noncovalent interactions, we also discuss the advantages of small peptides as a prevalent molecular platform to generate a wide range of supramolecular biofunctional materials for the applications in drug delivery, tissue engineering, immunology, cancer therapy, fluorescent imaging, and stem cell regulation. This review aims to provide a brief synopsis of recent achievements at the intersection of supramolecular chemistry and biomedical science in hope of contributing to the multidisciplinary research on supramolecular biofunctional materials for a wide range of applications. We envision that supramolecular biofunctional materials will contribute to the development of new therapies that will ultimately lead to a paradigm shift for developing next generation biomaterials for medicine.

Probing the surface chemistry of self-assembled peptide hydrogels using solution-state NMR spectroscopy

The surface chemistry of self-assembled hydrogel fibres - their charge, hydrophobicity and ion-binding dynamics - is recognised to play an important role in determining how the gels develop as well as their suitability for different applications. However, to date there are no established methodologies for the study of this surface chemistry. Here, we demonstrate how solution-state NMR spectroscopy can be employed to measure the surface chemical properties of the fibres in a range of hydrogels formed from N-functionalised dipeptides, an effective and versatile class of gelator that has attracted much attention. By studying the interactions with the gel fibres of a diverse range of probe molecules and ions, we can simultaneously study a number of surface chemical properties of the NMR invisible fibres in an essentially non-invasive manner. Our results yield fresh insights into the materials. Most notably, gel fibres assembled using different tiggering methods bear differing amounts of negative charge as a result of a partial deprotonation of the carboxylic acid groups of the gelators. We also demonstrate how chemical shift imaging (CSI) techniques can be applied to follow the formation of hydrogels along chemical gradients. We apply CSI to study the binding of Ca²⁺ and subsequent gelation of peptide assemblies at alkaline pH. Using metal ion-binding molecules as probes, we are able to detect the presence of bound Ca²⁺ ions on the surface of the gel fibres. We briefly explore how knowledge of the surface chemical properties of hydrogels could be used to inform their practical application in fields such as drug delivery and environmental remediation.

Tuning hydrogels through metal-based gelation triggers

N-terminal capped tripeptides self-assemble into hydrogels with tuneable properties depending on gelation trigger, giving differences in structure, stiffness and biocompatibility.

Amino acid-based amphiphilic hydrogels: metal ion induced tuning of mechanical and thermal stability

A phenylalanine based gelator was found to form a hydrogel in phosphate buffer solution. Its mechanical properties are influenced by a range of metal ions.

Stabilizing bubble and droplet interfaces using dipeptide hydrogels

Hydrophobic dipeptide molecules can be used to create interfacial films covering bubbles and droplets made from a range of oils.

Doxorubicin-loaded mesoporous silica nanoparticle composite nanofibers for long-term adjustments of tumor apoptosis

There is a high local recurrence (LR) rate in breast-conserving therapy (BCT) and enhancement of the local treatment is promising as a way to improve this. Thus we propose a drug delivery system using doxorubicin (DOX)-loaded mesoporous silica nanoparticle composite nanofibers which can release anti-tumor drugs in two phases-burst release in the early stage and sustained release at a later stage-to reduce the LR of BCT. In the present study, we designed a novel composite nanofibrous scaffold to realize the efficient release of drugs by loading both DOX and DOX-loaded mesoporous silica nanoparticles into an electrospun PLLA nanofibrous scaffold. In vitro results demonstrated that this kind of nanomaterial can release DOX in two phases, and the results of in vivo experiments showed that this hybrid nanomaterial significantly inhibited the tumor growth in a solid tumor model. Histopathological examination demonstrated that the apoptosis of tumor cells in the treated group over a 10 week period was significant. The anti-cancer effects were also accompanied with decreased expression of Bcl-2 and TNF-α, along with up-regulation of Bax, Fas and the activation of caspase-3 levels. The present study illustrates that the mesoporous silica nanoparticle composite nanofibrous scaffold could have anti-tumor properties and could be further developed as adjuvant therapeutic protocols for the treatment of cancer.

Influence of C-H···O Hydrogen Bonds on Macroscopic Properties of Supramolecular Assembly

For CH···O hydrogen bonds in assembled structures and the applications, one of the critical issues is how molecular spatial structures affect their interaction modes as well as how to translate the different modes into the macroscopic properties of materials. Herein, coumarin-derived isomeric hydrogelators with different spatial structures are synthesized, where only nitrogen atoms locate at the ortho, meso, or para position in the pyridine ring. The gelators can self-assemble into single crystals and nanofibrous networks through CH···O interactions, which are greatly influenced by nitrogen spatial positions in the pyridine ring, leading to the different self-assembly mechanisms, packing modes, and properties of the nanofibrous networks. Typically, different cell proliferation rates are obtained on the different CH···O bonds driving nanofibrous structures, implying that tiny variation of the stereo-position of nitrogen atoms can be sensitively detected by cells. The study paves a novel way to investigate the influence of isomeric molecular assembly on macroscopic properties and functions of materials.

The Enzyme-instructed assembly of the core of yeast prion Sup35 to form supramolecular hydrogels

Based on the self-assembly capability of the core segment (GNNQQNY) of yeast prion Sup35, we design and synthesis a series of structurally related precursors for enzymatic formation of hydrogels. We found that, with the catalysis of alkaline phosphatase, the precursor becomes a hydrogelator that self-assembles in water to form nanofibers with an average width less than ten nanometers. Interestingly, the introduction of amyloid segment into a cytotoxic precursor (N'ffyp: D-1P) is able to abrogate the cytotoxicity of the precursor, making the resulting peptide to be cell compatible. This work contributes a new insight to the use of enzyme to form cell compatible hydrogels of peptides cross-β spine.

Supramolecular nanofibers of self-assembling peptides and DDP to inhibit cancer cell growth

The addition of cis-dichlorodiamineplatinum(ii) to a taxol-peptide amphiphile results in hydrogelations.

Supramolecular Hydrogelators and Hydrogels: From Soft Matter to Molecular Biomaterials

In this review we intend to provide a relatively comprehensive summary of the work of supramolecular hydrogelators after 2004 and to put emphasis particularly on the applications of supramolecular hydrogels/hydrogelators as molecular biomaterials. After a brief introduction of methods for generating supramolecular hydrogels, we discuss supramolecular hydrogelators on the basis of their categories, such as small organic molecules, coordination complexes, peptides, nucleobases, and saccharides. Following molecular design, we focus on various potential applications of supramolecular hydrogels as molecular biomaterials, classified by their applications in cell cultures, tissue engineering, cell behavior, imaging, and unique applications of hydrogelators. Particularly, we discuss the applications of supramolecular hydrogelators after they form supramolecular assemblies but prior to reaching the critical gelation concentration because this subject is less explored but may hold equally great promise for helping address fundamental questions about the mechanisms or the consequences of the self-assembly of molecules, including low molecular weight ones. Finally, we provide a perspective on supramolecular hydrogelators. We hope that this review will serve as an updated introduction and reference for researchers who are interested in exploring supramolecular hydrogelators as molecular biomaterials for addressing the societal needs at various frontiers.

Dehydrodipeptide Hydrogelators Containing Naproxen N-Capped Tryptophan: Self-Assembly, Hydrogel Characterization, and Evaluation as Potential Drug Nanocarriers

In this work, we introduce dipeptides containing tryptophan N-capped with the nonsteroidal anti-inflammatory drug naproxen and C-terminal dehydroamino acids, dehydrophenylalanine (ΔPhe), dehydroaminobutyric acid (ΔAbu), and dehydroalanine (ΔAla) as efficacious protease resistant hydrogelators. Optimized conditions for gel formation are reported. Transmission electron microscopy experiments revealed that the hydrogels consist of networks of micro/nanosized fibers formed by peptide self-assembly. Fluorescence and circular dichroism spectroscopy indicate that the self-assembly process is driven by stacking interactions of the aromatic groups. The naphthalene groups of the naproxen moieties are highly organized in the fibers through chiral stacking. Rheological experiments demonstrated that the most hydrophobic peptide (containing C-terminal ΔPhe) formed more elastic gels at lower critical gelation concentrations. This gel revealed irreversible breakup, while the C-terminal ΔAbu and ΔAla gels, although less elastic, exhibited structural recovery and partial healing of the elastic properties. A potential antitumor thieno[3,2-b]pyridine derivative was incorporated (noncovalently) into the gel formed by the hydrogelator containing C-terminal ΔPhe residue. Fluorescence and Förster resonance energy transfer measurements indicate that the drug is located in a hydrophobic environment, near/associated with the peptide fibers, establishing this type of hydrogel as a good drug-nanocarrier candidate.

Zinc-triggered hydrogelation of self-assembled small molecules to inhibit bacterial growth

There is a significant need to develop antibacterial materials that could be applied locally and directly to the places surrounded by large amount of bacteria, in order to address the problems of bacterial antibiotic-resistance or irreversible biofilm formation. Hydrogels are thought to be suitable candidates due to their versatile applications in biomedical field. Among them, small molecular hydrogels have been paid lots of attention because they are easy to design and fabricate and often sensitive to external stimuli. Meanwhile, the antibacterial activity of metal ions are attracting more and more attention because resistance to them are not yet found within bacteria. We therefore designed the zinc ion binding peptide of Nap-GFFYGGGHGRGD, who can self-assemble into hydrogels after binds Zn(2+) and inhibit the growth of bacteria due to the excellent antibacterial activity of Zn(2+). Upon the addition of zinc ions, solutions containing Nap-GFFYGGGHGRGD transformed into supramolecular hydrogels composed of network of long nano-fibers. Bacterial tests revealed an antibacterial effect of the zinc triggered hydrogels on E. coli. The studied small molecular hydrogel shows great potential in locally addressing bacterial infections.

A novel pH-responsive hydrogel based on natural polysaccharides for controlled release of protein drugs

A biocompatible and biodegradable hydrogel based on a natural polysaccharide was prepared, characterized and confirmed to be an effective and “smart” carrier for controlled protein delivery.

Self-assembly of short peptides to form hydrogels: design of building blocks, physical properties and technological applications

Hydrogels are unique supramolecular solid-like assemblies composed mainly of water molecules that are held by molecular networks. Physical hydrogels that are formed by a set of non-covalent interactions to establish a well-ordered scaffold devoid of any chemical cross-linking are especially intriguing for various biotechnological and medical applications. Peptides are particularly interesting building blocks of physical gels because of the role of polypeptides as structural elements in biological systems, the extensive ability for their chemical and biological decoration and functionalization, and the facile synthesis of natural and modified peptides. This review describes the assembly and properties of physical hydrogels that have been formed by the self-association of very simple peptide building blocks. Natural short peptides, as short as dipeptides, can form ordered gel assemblies. Moreover, in the case of N-terminal protection, even a protected amino acid can serve as an efficient hydrogelator. Further elucidation of hydrogelators' assembly, as well as the characterization of their physical properties, can guide the rational design of building blocks for a desired application. The possible mechanism of self-assembly is discussed in line with the chemical nature of the short peptides. Different methods have been used to induce hydrogel assembly, which may significantly affect the mechanical characteristics of the resulting gels. Here, special emphasis is given to methods that allow either spatial control of hydrogel formation or modulation of physical properties of the gel. Finally, the parameters that influence hydrogelation are described, and insights for their design are provided.

Exceptionally strong hydrogels through self-assembly of an indole-capped dipeptide

A dipeptide bearing an indole capping group forms exceptionally strong, hydrogels, with a storage modulus of ∼0.3 MPa. these hydrogels exhibit a minimal fibre-branching, with strong lateral association of fibrils.

Short-peptide-based molecular hydrogels: novel gelation strategies and applications for tissue engineering and drug delivery

Molecular hydrogels hold big potential for tissue engineering and controlled drug delivery. Our lab focuses on short-peptide-based molecular hydrogels formed by biocompatible methods and their applications in tissue engineering (especially, 3D cell culture) and controlled drug delivery. This feature article firstly describes our recent progresses of the development of novel methods to form hydrogels, including the strategy of disulfide bond reduction and assistance with specific protein-peptide interactions. We then introduce the applications of our hydrogels in fields of controlled stem cell differentiation, cell culture, surface modifications of polyester materials by molecular self-assembly, and anti-degradation of recombinant complex proteins. A novel molecular hydrogel system of hydrophobic compounds that are only formed by hydrolysis processes was also included in this article. The hydrogels of hydrophobic compounds, especially those of hydrophobic therapeutic agents, may be developed into a carrier-free delivery system for long term delivery of therapeutic agents. With the efforts in this field, we believe that molecular hydrogels formed by short peptides and hydrophobic therapeutic agents can be practically applied for 3D cell culture and long term drug delivery in near future, respectively.

On crystal versus fiber formation in dipeptide hydrogelator systems

Naphthalene dipeptides have been shown to be useful low-molecular-weight gelators. Here we have used a library to explore the relationship between the dipeptide sequence and the hydrogelation efficiency. A number of the naphthalene dipeptides are crystallizable from water, enabling us to investigate the comparison between the gel/fiber phase and the crystal phase. We succeeded in crystallizing one example directly from the gel phase. Using X-ray crystallography, molecular modeling, and X-ray fiber diffraction, we show that the molecular packing of this crystal structure differs from the structure of the gel/fiber phase. Although the crystal structures may provide important insights into stabilizing interactions, our analysis indicates a rearrangement of structural packing within the fibers. These observations are consistent with the fibrillar interactions and interatomic separations promoting 1D assembly whereas in the crystals the peptides are aligned along multiple axes, allowing 3D growth. This observation has an impact on the use of crystal structures to determine supramolecular synthons for gelators.