Friction and adhesion forces of Bacillus thuringiensis spores on planar surfaces in atmospheric systems

Transparent superhydrophilic and superhydrophobic nanoparticle textured coatings: comparative study of anti-soiling performance

The anti-soiling (AS) performance of highly reflective, superhydrophilic (SPH, 0° water contact angle) coated mirrors was characterized and compared with that of superhydrophobic (SP, >165° water contact angle) coated mirrors. A simple one-step nanotextured silica nanoparticle coating on a mirror exhibited SPH properties associated with hydrophilic rough surfaces. Another mirror surface post-functionalized with low-surface-energy ligand molecules displayed SP behavior. Both coated mirrors, with no solar reflectance loss, demonstrated excellent AS performance because the engineered surface roughness reduced the adhesive force of dust particles. The daily degradation in solar reflectance induced by dust accumulation under outdoor field testing demonstrated that the SPH- and SP-coated mirrors, compared with an uncoated mirror, maintained higher solar reflectance, which was associated with the designed self-cleaning behavior and natural cleaning. However, over the long term, dust-moisture cementation-evidenced by organic hard water stains on the mirror-initiated unrecoverable reflectance loss on the SP-coated mirror after 3 months, whereas the SPH-coated mirror maintained higher reflectance for 7.5 months. Considering fabrication costs and maintenance, SPH-coated nanotextured mirrors offer potential benefits for application in solar energy harvesting.

A growing bacterial colony in two dimensions as an active nematic

How a single bacterium becomes a colony of many thousand cells is important in biomedicine and food safety. Much is known about the molecular and genetic bases of this process, but less about the underlying physical mechanisms. Here we study the growth of single-layer micro-colonies of rod-shaped Escherichiacoli bacteria confined to just under the surface of soft agarose by a glass slide. Analysing this system as a liquid crystal, we find that growth-induced activity fragments the colony into microdomains of well-defined size, whilst the associated flow orients it tangentially at the boundary. Topological defect pairs with charges \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\pm {\textstyle{1 \over 2}}$$\end{document}±12 are produced at a constant rate, with the \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$+ {\textstyle{1 \over 2}}$$\end{document}+12 defects being propelled to the periphery. Theoretical modelling suggests that these phenomena have different physical origins from similar observations in other extensile active nematics, and a growing bacterial colony belongs to a new universality class, with features reminiscent of the expanding universe.

Rod-shaped bacteria are an example of active matter. Here the authors find that a growing bacterial colony harbours internal cellular flows affecting orientational ordering in its interior and at the boundary. Results suggest this system may belong to a new active matter universality class.

The anti-soiling performance of highly reflective superhydrophobic nanoparticle-textured mirrors

The anti-soiling (AS) performance of solar mirrors coated with a highly transparent, superhydrophobic nanoparticle-textured coating has been characterized. The AS coatings were created on the mirror surface by depositing nano-textured silica nanoparticle layers of ∼250 nm thickness using a draw-down coating process, followed by fluorination of the nanoparticles in a molecular vapor deposition process. Highly uniform surface features of the AS-coated mirrors (20 × 30 cm2, no measurable loss in specular reflectance, and water contact angle >165°) provided an outstanding AS performance. A 4× reduction in the rate of dust accumulation as determined by gravimetric measurement of the accumulated dust on coated versus uncoated mirrors was observed. Additional evidence of a significant reduction in soiling rate was determined during measurements of specular reflectance in an outdoor environment test. The adhesion force between a model sand particle and nano-textured coatings in the hydrophobic to superhydrophobic range was also studied. A dramatic decrease in adhesive force acting on the particle was observed with increasing surface hydrophobicity. The results align well with the observed dust accumulation on the AS-coated mirrors. The AS-coated mirror maintains a high reflectivity by shedding dust and resisting dust accumulation, providing a potential benefit when applied to mirrors in the solar field of a concentrated solar power generation plant.

Implications for directionality of nanoscale forces in bacterial attachment

Adhesion and friction are closely related and play a predominant role in many natural processes. From the wall-clinging feet of the gecko to bacteria forming a biofilm, in many cases adhesion is a necessity to survive. The direction in which forces are applied has shown to influence the bond strength of certain systems tremendously and can mean the difference between adhesion and detachment. The spatula present on the extension of the feet of the gecko can either attach or detach, based on the angle at which they are loaded. Certain proteins are known to unfold at different loads, depending on the direction at which the load is applied and some bacteria have specific receptors which increase their bond strength in the presence of shear. Bacteria adhere to any man-made surface despite the presence of shear forces due to running fluids, air flow, and other causes. In bacterial adhesion research, however, adhesion forces are predominantly measured perpendicularly to surfaces, whereas other directions are often neglected. The angle of shear forces acting on bacteria or biofilms will not be at a 90° angle, as shear induced by flow is often along the surface. Measuring at different angles or even lateral to the surface will give a more complete overview of the adhesion forces and mechanism, perhaps even resulting in alternative means to discourage bacterial adhesion or promote removal.

Evaluation of Chemical Interactions between Small Molecules in the Gas Phase Using Chemical Force Microscopy

Chemical force microscopy analyzes the interactions between various chemical/biochemical moieties in situ. In this work we examined force-distance curves and lateral force to measure the interaction between modified AFM tips and differently functionalized molecular monolayers. Especially for the measurements in gas phase, we investigated the effect of humidity on the analysis of force-distance curves and the images in lateral force mode. Flat chemical patterns composed of different functional groups were made through micro-contact printing and lateral force mode provided more resolved analysis of the chemical patterns. From the images of 1-octadecanethiol/11-mercapto-1-undecanoic acid patterns, the amine group functionalized tip brought out higher contrast of the patterns than an intact silicon nitride tip owing to the additional chemical interaction between carboxyl and amine groups. For more complex chemical interactions, relative chemical affinities toward specific peptides were assessed on the pattern of 1-octadecanethiol/phenyl-terminated alkanethiol. The lateral image of chemical force microscopy reflected specific preference of a peptide to phenyl group as well as the hydrophobic interaction.

The role of mechanical forces in the planar-to-bulk transition in growing Escherichia coli microcolonies

Mechanical forces are obviously important in the assembly of three-dimensional multicellular structures, but their detailed role is often unclear. We have used growing microcolonies of the bacterium Escherichia coli to investigate the role of mechanical forces in the transition from two-dimensional growth (on the interface between a hard surface and a soft agarose pad) to three-dimensional growth (invasion of the agarose). We measure the position within the colony where the invasion transition happens, the cell density within the colony and the colony size at the transition as functions of the concentration of the agarose. We use a phenomenological theory, combined with individual-based computer simulations, to show how mechanical forces acting between the bacterial cells, and between the bacteria and the surrounding matrix, lead to the complex phenomena observed in our experiments—in particular the observation that agarose concentration non-trivially affects the colony size at transition. Matching these approaches leads to a prediction for how the friction between the bacteria and the agarose should vary with agarose concentration. Our experimental conditions mimic numerous clinical and environmental scenarios in which bacteria invade soft matrices, as well as shedding more general light on the transition between two- and three-dimensional growth in multicellular assemblies.

Influence of surface potential on the adhesive force of radioactive gold surfaces

Radioactive particles may acquire surface potential through self-charging, and thus can behave differently from natural aerosols in atmospheric systems with respect to aggregation, deposition, resuspension, and transport to areas surrounding a radioactive source. This work focuses on the adhesive force between radioactive particles and metallic surfaces, which relates to the deposition and resuspension of particles on surrounding surfaces. Scanning surface potential microscopy was employed to measure the surface potential of radioactive gold foil. Atomic force microscopy was used to investigate the adhesive force for gold that acquired surface charge either by irradiation or by application of an equivalent electrical bias. Overall, the adhesive force increases with increasing surface potential or relative humidity. However, a behavior that does not follow the general trend was observed for the irradiated gold at a high decay rate. A comparison between experimental measurements and calculated values revealed that the surface potential promotes adhesion. The contribution of the electrostatic force at high levels of relative humidity was lower than the one found using theoretical calculations due to the effects caused by enhanced adsorption rate of water molecules under a high surface charge density. The results of this study can be used to provide a better understanding of the behavior of radioactive particles in atmospheric systems.

Simple physical approach to reducing frictional and adhesive forces on a TiO2 surface via creating heterogeneous nanopores

A simple physical strategy to reduce the frictional and adhesive forces on TiO(2) films was proposed by constructing mesoporous TiO(2) films with heterogeneously distributed nanopores on the film surfaces. In comparison, TiO(2) films with densely packed nanoparticles were also prepared. The crystal structure and morphology of the films were characterized with Raman spectroscopy, field emission scanning electron microscopy (FESEM), and atomic force microscopy (AFM). It was found that the TiO(2)(B) phase exists in the mesoporuos TiO(2) films but not in the densely packed films. The existence of TiO(2)(B) plays a significant role in creating and maintaining the nanopores in the mesoporous TiO(2) films. The frictional and adhesive forces were measured on both films using AFM. The mesoporous films exhibit two typical adhesion forces of around 3 and 12 nN in the force distribution profile whereas the densely packed films show only one around 12 nN. The frictional coefficients were 2.6 × 10(-3) and 6.7 × 10(-2) for the mesoporous and densely packed TiO(2) films, respectively. A model based on the atomic structures of a thin film of water molecules adsorbed on TiO(2) surfaces leading to hydrophobic effects was proposed to understand the lower frictional and adhesive forces observed on the mesoporous TiO(2) films. This simple physical approach to reducing the frictional and adhesive forces on TiO(2) films could have broad applications to a variety of surface coatings.