The role of growth temperature in the adhesion and mechanics of pathogenic L. monocytogenes: an AFM study

Impact of sodium nitroprusside concentration added to batch cultures of Escherichia coli biofilms on the c-di-GMP levels, morphologies and adhesion of biofilm-dispersed cells

Biofilm dispersion can be triggered by the application of dispersing agents such as nitric oxide (NO)-donors, resulting in the release of biofilm-dispersed cells into the environment. In this work, biofilm-dispersed cells were obtained by adding different concentrations of NO-donor sodium nitroprusside (0.5, 5, 50 µM, and 2.5 mM of SNP) to batch cultures of pre-formed Escherichia coli biofilms. Except for those dispersed by 5 µM of SNP, biofilm-dispersed cells were found to be wider and longer than the planktonic cells and to have higher c-di-GMP levels and greater adhesion forces to silicon nitride surfaces in water as measured by atomic force microscope. Consequently, the optimum concentration of SNP to disperse E. coli biofilms was found to be 5 µM of SNP, whose addition to batch cultures resulted in a significant biofilm dispersion and the dispersed cells having c-di-GMP levels, morphologies and adhesion strengths similar to their planktonic counterparts.

Innovative Perspectives on Biofilm Interactions in Poultry Drinking Water Systems and Veterinary Antibiotics Used Worldwide

Prudent use of antibiotics in livestock is widely considered to be important to prevent antibiotic resistance. This study aimed to evaluate the interactions between biofilms and veterinary antibiotics in therapeutic concentrations administrated via drinking water through a standardized experimental setup. In this context, two biofilms formed by pseudomonads (Pseudomonas (P.) aeruginosa or P. fluorescens) and a susceptible Escherichia (E.) coli strain were developed in a nutrient-poor medium on the inner surface of polyvinyl chloride pipe pieces. Subsequently, developing biofilms were exposed to sulfadiazine/trimethoprim (SDZ/TMP) or tylosin A (TYL A) in dosages recommended for application in drinking water for 5 or 7 days, respectively. Various interactions were detected between biofilms and antibiotics. Microbiological examinations revealed that only TYL A reduced the number of bacteria on the surface of the pipes. Additionally, susceptible E. coli survived both antibiotic treatments without observable changes in the minimum inhibitory concentration to 13 relevant antibiotics. Furthermore, as demonstrated by HPLC-UV, the dynamics of SDZ/TMP and TYL A in liquid media differed between the biofilms of both pseudomonads over the exposure period. We conclude that this approach represents an innovative step toward the effective evaluation of safe veterinary antibiotic use.

Atomic Force Microscopy Investigation of the Contributions of Listeria monocytogenes Cell-Wall Biomacromolecules to Their Adherence and Mechanics

In this work, the contributions of the pathogenic Listeria monocytogenes cell-wall biomacromolecules to the bacterial mechanics and adhesion to a model inert surface of silicon nitride in water were investigated by atomic force microscopy. Chemical ethylenediaminetetraacetic acid (EDTA) and biological enzymatic trypsin treatments of cells were performed to partially or totally remove the bacterial cell-wall proteins and carbohydrates. Removal of 48.2% proteins and 29.2% of carbohydrates from the cell-wall of the bacterium by the EDTA treatment resulted in a significant decrease in the length of the bacterial cell-wall biomacromolecules and an increase in the rigidity of the bacterial cells as predicted from fitting a model of steric repulsion to the force-distance approach data and classic Hertz model to the indentation-force data, respectively. In comparison, removal of almost all the cell-wall proteins (99.5% removal) and 8.6% of cell-wall carbohydrates by the trypsin treatment resulted in an increase in the elasticity of the bacterial cells, an increase in the extension of the cell-wall biomacromolecules, and a significant decrease in their apparent grafting densities. In addition, adhesion strength of native-untreated L. monocytogenes to silicon nitride in water decreased by 30% on average after the EDTA treatment and further decreased by 60% on average after the trypsin treatment, showing a positive correlation with the% removal of cell-wall proteins by the EDTA and trypsin treatments, respectively.

Responses of Acinetobacter baumannii Bound and Loose Extracellular Polymeric Substances to Hyperosmotic Agents Combined with or without Tobramycin: An Atomic Force Microscopy Study

In this work, contributions of extracellular polymeric substances (EPS) to the nanoscale mechanisms through which the multidrug-resistant Acinetobacter baumannii responds to antimicrobial and hyperosmotic treatments were investigated by atomic force microscopy. Specifically, the adhesion strengths to a control surface of silicon nitride (Si₃N₄) and the lengths of bacterial surface biopolymers of bound and loose EPS extracted from A. baumannii biofilms were quantified after individual or synergistic treatments with hyperosmotic agents (NaCl and maltodextrin) and an antibiotic (tobramycin). In the absence of any treatment, the loose EPS were significantly longer in length and higher in adhesion to Si₃N₄ than the bound EPS. When used individually, the hyperosmotic agents and tobramycin collapsed the A. baumannii bound and loose EPS. The combined treatment of maltodextrin with tobramycin collapsed only the loose EPS and did not alter the adhesion of both bound and loose EPS to Si₃N₄. In addition, the combined treatment was not as effective in collapsing the EPS molecules as when tobramycin was applied alone. Finally, the effects of treatments were dose-dependent. Altogether, our findings suggest that a sequential treatment could be effective in treating A. baumannii biofilms, in which a hyperosmotic agent is used first to collapse the EPS and limit the diffusion of nutrients into the biofilm, followed by the use of an antibiotic to kill the bacterial cells that escape from the biofilm because of starvation.

Analyzing the effect of pH on microalgae adhesion by identifying the dominant interaction between cell and surface

Microalgae adhesion plays a critical role in developing effective photobioreactors for large-scale production of microalgae biofuel. This study focused on elucidating the influencing mechanism of liquid medium pH on microalgae adhesion by identifying the dominant interactions between cell and substratum using a criterion. Herein, the adhesion of three microalgae onto two substrata at a series of pH was observed using a flow chamber. The results indicated that the adhesion of freshwater Chlorella sp. onto PVC and glass and marine Chlorella sp. and N. oculata onto glass decreased with increasing pH, because these adhesions were dominated by the EL interaction, and the pH would influence the adhesion primarily by affecting the ζ potential of the cell and substratum. Whereas, the adhesion of marine Chlorella sp. and N. oculata onto PVC increased with increasing pH, because these adhesions were dominated by Lewis acid-base (AB) interaction, and the pH would influence the adhesion primarily by affecting the components of surface free energy of cell. The study demonstrated that the influencing mechanism of pH on adhesion can be conclusively elucidated by identifying the dominant interaction between the cell and the surface, and may have significant implications for predicting cell adhesion in various applications.

Quantitative Criterion to Predict Cell Adhesion by Identifying Dominant Interaction between Microorganisms and Abiotic Surfaces

Cell adhesion is ubiquitous and plays an important role in various scientific and engineering problems. Herein, a quantitative criterion to predict cell adhesion was proposed by identifying the dominant interaction between microorganisms and abiotic surfaces. According to the criterion, the dominant interaction in cell adhesion could be identified as a Lewis acid-base (AB) interaction or electrostatic (EL) interaction via comparison of two expressions containing the electron-donor characteristics of the microorganism (γ_mv^-) and abiotic surface (γ_sv^-) and their ζ potentials (ζ_m, ζ_s). The results revealed that when dominated by the AB interaction, adhesion would decrease with increasing [Formula: see text]. However, when the EL interaction was dominant, adhesion would decrease with increasing (ζ_m + ζ_s)². We have verified the criterion based on the adhesion of microalgae, bacteria, and fungi onto various surfaces obtained via our experiments and available in literature studies. The results demonstrated that the criterion had important implications in the prediction of cell adhesion in various applications.

The Effects of β-Lactam Antibiotics on Surface Modifications of Multidrug-Resistant Escherichia coli: A Multiscale Approach

Possible multidrug-resistant (MDR) mechanisms of four resistant strains of Escherichia coli to a model β-lactam, ampicillin, were investigated using contact angle measurements of wettability, crystal violet assays of permeability, biofilm formation, fluorescence imaging, and nanoscale analyses of dimensions, adherence, and roughness. Upon exposure to ampicillin, one of the resistant strains, E. coli A5, changed its phenotype from elliptical to spherical, maintained its roughness and biofilm formation abilities, decreased its length and surface area, maintained its cell wall integrity, increased its hydrophobicity, and decreased its nanoscale adhesion to a model surface of silicon nitride. Such modifications are suggested to allow these cells to conserve energy during metabolic dormancy. In comparison, resistant strains E. coli D4, A9, and H5 elongated their cells, increased their roughness, increased their nanoscale adhesion forces, became more hydrophilic, and increased their biofilm formation upon exposure to ampicillin. These results suggest that these strains resisted ampicillin through biofilm formation that possibly introduces diffusion limitations to antibiotics. Investigations of how MDR bacterial cells modify their surfaces in response to antibiotics can guide research efforts aimed at designing more effective antibiotics and new treatment strategies for MDR bacterial infections.

Effect of incubation duration, growth temperature, and abiotic surface type on cell surface properties, adhesion and pathogenicity of biofilm-detached Staphylococcus aureus cells

The goal of this study was to investigate the effect of growth conditions such as the temperature (20, 30 and 37 °C), incubation duration (24 and 48 h) and surface type (stainless steel and polycarbonate) on the cell surface physicochemical properties and adhesion to abiotic surfaces of biofilm-detached and planktonic Staphylococcus aureus cells. This study tested also the hypothesis that S. aureus planktonic cells exhibit distinct pathogenic properties compared with their sessile counterparts. The results showed that the changes of the growth conditions promoted changes in the zeta potential, hydrophobicity, electron donor/acceptor character of the studied cell populations. Biofilm-detached cells showed a greater adhesion to stainless steel and polycarbonate compared with planktonic cells. Compared with planktonic cells, sessile ones showed higher cytotoxic effect against HeLa cells, DNase activity, and siderophore levels. The higher cytotoxic effect and production of DNase and siderophore increased with the increase of temperature and duration of incubations. Based on the obtained data, the S. aureus biofilm-detached cells were found to be distinct in many physiological properties compared with their planktonic counterparts.

Piezoelectric tuning fork biosensors for the quantitative measurement of biomolecular interactions

The quantitative measurement of biomolecular interactions is of great interest in molecular biology. Atomic force microscopy (AFM) has proved its capacity to act as a biosensor and determine the affinity between biomolecules of interest. Nevertheless, the detection scheme presents certain limitations when it comes to developing a compact biosensor. Recently, piezoelectric quartz tuning forks (QTFs) have been used as laser-free detection sensors for AFM. However, only a few studies along these lines have considered soft biological samples, and even fewer constitute quantified molecular recognition experiments. Here, we demonstrate the capacity of QTF probes to perform specific interaction measurements between biotin-streptavidin complexes in buffer solution. We propose in this paper a variant of dynamic force spectroscopy based on representing adhesion energies E (aJ) against pulling rates v (nm s(-1)). Our results are compared with conventional AFM measurements and show the great potential of these sensors in molecular interaction studies.

Citrate-Coated Silver Nanoparticles Interactions with Effluent Organic Matter: Influence of Capping Agent and Solution Conditions

Fate and transport studies of silver nanoparticles (AgNPs) discharged from urban wastewaters containing effluent organic matter (EfOM) into natural waters represent a key knowledge gap. In this study, EfOM interfacial interactions with AgNPs, and their aggregation kinetics were investigated by atomic force microscopy (AFM) and time-resolved dynamic light scattering (TR-DLS), respectively. Two well-characterized EfOM isolates, i.e., wastewater humic (WW humic) and wastewater colloids (WW colloids, a complex mixture of polysaccharides-proteins-lipids), and a River humic isolate of different characteristics were selected. Citrate-coated AgNPs were selected as representative capped-AgNPs. Citrate-coated AgNPs showed a considerable stability in Na(+) solutions. However, Ca(2+) ions induced aggregation by cation bridging between carboxyl groups on citrate. Although the presence of River humic increased the stability of citrate-coated AgNPs in Na(+) solutions due to electrosteric effects, they aggregated in WW humic-containing solutions, indicating the importance of humics characteristics during interactions. Ca(2+) ions increased citrate-coated AgNPs aggregation rates in both humic solutions, suggesting cation bridging between carboxyl groups on their structures as a dominant interacting mechanism. Aggregation of citrate-coated AgNPs in WW colloids solutions was significantly faster than those in both humic solutions. Control experiments in urea solution indicated hydrogen bonding as the main interacting mechanism. During AFM experiments, citrate-coated AgNPs showed higher adhesion to WW humic than to River humic, evidencing a consistency between TR-DLS and AFM results. Ca(2+) ions increased citrate-coated AgNPs adhesion to both humic isolates. Interestingly, strong WW colloids interactions with citrate caused AFM probe contamination (nanoparticles adsorption) even at low Na(+) concentrations, indicating the impact of hydrogen bonding on adhesion. These results suggest the importance of solution conditions and capping agents on the stability of AgNPs in solution. However, the characteristics of organics would play a crucial role in the fate and transport of these nano contaminants in urban wastewaters and natural water systems.

Single-bacterium nanomechanics in biomedicine: unravelling the dynamics of bacterial cells

The use of the atomic force microscope (AFM) in microbiology has progressed significantly throughout the years since its first application as a high-resolution imaging instrument. Modern AFM setups are capable of characterizing the nanomechanical behaviour of bacterial cells at both the cellular and molecular levels, where elastic properties and adhesion forces of single bacterium cells can be examined under different experimental conditions. Considering that bacterial and biofilm-mediated infections continue to challenge the biomedical field, it is important to understand the biophysical events leading towards bacterial adhesion and colonization on both biological and non-biological substrates. The purpose of this review is to present the latest findings concerning the field of single-bacterium nanomechanics, and discuss future trends and applications of nanoindentation and single-cell force spectroscopy techniques in biomedicine.

Thermodynamic prediction of growth temperature dependence in the adhesion of Pseudomonas aeruginosa and Staphylococcus aureus to stainless steel and polycarbonate

This study investigated the effect of growth temperature changes (20, 30, and 37°C) on the adhesion behavior of Pseudomonas aeruginosa and Staphylococcus aureus to stainless steel and polycarbonate. Adhesion assays were performed under static conditions at 20°C. In addition, the validity of the thermodynamic and extended Derjaguin, Landau, Verwey, and Overbeek theories as predictive tools of bacterial adhesion were studied. The surface properties of the bacterial cells and the substrates of attachment were characterized, and atomic force microscopy was used to analyze the surface topography. The results indicated that the highest adhesion rate of P. aeruginosa and S. aureus on both surfaces was observed when the cells were grown at 37°C. The bacterial adhesion to stainless steel was found to be two times higher than to polycarbonate for both bacteria, whatever the condition used. The present study underlined that the thermodynamic and the extended Derjaguin, Landau, Verwey, and Overbeek theories were able to partially predict the empirical results of P. aeruginosa adhesion. However, these theories failed to predict the adhesion behavior of S. aureus to both surfaces when the growth temperature was changed. The results of the microbial adhesion to solvent indicated that the adhesion rate to abiotic surfaces may correlate with the hydrophobicity of bacterial surfaces. The effect of surface topography on bacterial adhesion showed that surface roughness, even on the very low nanometer scale, has a significant effect on bacterial adhesion behavior.

Biofilm formation and persistence on abiotic surfaces in the context of food and medical environments

The biofilm formation on abiotic surfaces in food and medical sectors constitutes a great public health concerns. In fact, biofilms present a persistent source for pathogens, such as Pseudomonas aeruginosa and Staphylococcus aureus, which lead to severe infections such as foodborne and nosocomial infections. Such biofilms are also a source of material deterioration and failure. The environmental conditions, commonly met in food and medical area, seem also to enhance the biofilm formation and their resistance to disinfectant agents. In this regard, this review highlights the effect of environmental conditions on bacterial adhesion and biofilm formation on abiotic surfaces in the context of food and medical environment. It also describes the current and emergent strategies used to study the biofilm formation and its eradication. The mechanisms of biofilm resistance to commercialized disinfectants are also discussed, since this phenomenon remains unclear to date.

Success and failure of colloidal approaches in adhesion of microorganisms to surfaces

Biofilms are communities of cells attached to surfaces, their contributions to biological process may be either a benefit or a threat depending on the microorganism involved and on the type of substrate and environment. Biofilm formation is a complex series of steps; due to the size of microorganisms, the initial phase of biofilm formation, the bacterial adhesion to the surface, has been studied and modeled using theories developed in colloidal science. In this review the application of approaches such as Derjaguin, Landau, Verwey, Overbeek (DLVO) theory and its extended version (xDLVO), to bacterial adhesion is described along with the suitability and applicability of such approaches to the investigation of the interface phenomena regulating cells adhesion. A further refinement of the xDLVO theory encompassing the brush model is also discussed. Finally, the evidences of phenomena neglected in colloidal approaches, such as surface heterogeneity and fluid flow, likely to be the source of failure are defined.

A new approach to decoupling of bacterial adhesion energies measured by AFM into specific and nonspecific components

A new method to decoupling of bacterial interactions measured by atomic force microscopy (AFM) into specific and nonspecific components is proposed. The new method is based on computing the areas under the approach and retraction curves. To test the efficacy of the new method, AFM was used to probe the repulsion and adhesion energies present between L. monocytogenes cells cultured at five pH values (5, 6, 7, 8 and 9) and silicon nitride (Si3N4). Overall adhesion energy was then decoupled into its specific and nonspecific components using the new method as well as using Poisson statistical approach. Poisson statistical method represents the most commonly used approach to decouple bacterial interactions into their components. For all pH conditions investigated, specific energies dominated the adhesion and a transition in adhesion and repulsion energies for cells cultured at pH 7 was observed. When compared, the differences in the specific and nonspecific energies obtained using Poisson analysis and the new method were on average 2.2% and 6.7%, respectively. The relatively close energies obtained using the two approaches demonstrate the efficacy of the new method as an alternative way to decouple adhesion energies into their specific and nonspecific components.

Interactions between rotavirus and natural organic matter isolates with different physicochemical characteristics

Interaction forces between rotavirus and Suwanee River natural organic matter (SRNOM) or Colorado River NOM (CRNOM) were studied by atomic force microscopy (AFM) in NaCl solutions and at unadjusted pH (5.7-5.9). Compared to CRNOM, SRNOM has more aromatic carbon and phenolic/carboxylic functional groups. CRNOM is characterized with aliphatic structure and considerable presence of polysaccharide moieties rich in hydroxyl functional groups. Strong repulsive forces were observed between rotavirus and silica or mica or SRNOM. The interaction decay length derived from the approaching curves for these systems involving rotavirus in high ionic strength solution was significantly higher than the theoretical Debye length. While no adhesion was observed for rotavirus and SRNOM, attraction was observed between CRNOM and rotavirus during approach and adhesion during retraction. Moreover, these adhesion forces decreased with increasing ionic strength. Interactions due to ionic hydrogen bonding between deprotonated carboxyl groups on rotavirus and hydroxyl functional groups on CRNOM were suggested as the dominant interaction mechanisms between rotavirus and CRNOM.

Thermo-regulated adhesion of the Streptococcus thermophilus Δrgg0182 strain

The physicochemical determinants governing the temperature-dependent adhesion of Streptococcus thermophilus to abiotic surfaces are identified under physiological condition for cells either lacking or not the Rgg0182 transcriptional regulator involved in their thermal adaptation. For that purpose, the wild type LMG18311 strain and Δrgg0182 mutant were imaged using highly resolved atomic force microscopy (AFM) at various cell growth temperatures (42 to 55 °C). The corresponding hydrophobic/hydrophilic balance of the cells was quantitatively addressed via the measurement by chemical force microcopy of their adhesion to a reference hydrophobic surface. Analysis of force-separation distance curves further allowed us to discriminate cell surfaces according to the presence or absence of biopolymers. These results were interpreted in relation to the measured adhesion of the Δrgg0182 mutant onto the hydrophobic wall of microwells in the temperature range from 46 to 52 °C. It is evidenced that the viscoelastic Δrgg0182 cell envelop behaves as a thermo-responsive film whose hydrophobicity increases with increasing temperature, thereby favoring cell attachment to hydrophobic surfaces. Regardless cell growth temperature, wild-type cells do not attach to hydrophobic surfaces and the presence of the Rgg0182 transcriptional regulator is associated with the synthesis of hydrophilic cell surface biopolymers. Throughout, the impact of electrostatics on bioadhesion is ruled out upon examination of electrohydrodynamic cell properties at 50 °C.

Combined Poisson and soft-particle DLVO analysis of the specific and nonspecific adhesion forces measured between L. monocytogenes grown at various temperatures and silicon nitride

Adhesion forces between pathogenic L. monocytogenes EGDe and silicon nitride (Si(3)N(4)) were measured using atomic force microscopy (AFM) under water and at room temperature for cells grown at five different temperatures (10, 20, 30, 37, and 40 °C). Adhesion forces were then decoupled into specific (hydrogen bonding) and nonspecific (electrostatic and Lifshitz-van der Waals) force components using Poisson statistical analysis. The strongest specific and nonspecific attraction forces were observed for cells grown at 30 °C, compared to those observed for cells grown at higher or lower temperatures, respectively. By combining the results of Poisson analysis with the results obtained through soft-particle Derjaguin-Landau-Verwey-Overbeek (DLVO) analysis, the contributions of the Lifshitz-van der Waals and electrostatic forces to the overall nonspecific interaction forces were determined. Our results showed that the Lifshitz-van der Waals attraction forces dominated the total nonspecific adhesion forces for all investigated thermal conditions. However, irrespective of the temperature of growth investigated, hydrogen bonding forces were always stronger than the nonspecific forces. Finally, by combining Poisson analysis with soft-particle analysis of DLVO forces, the closest separation distances where the irreversible bacterial adhesion takes place can be determined relatively easily. For all investigated thermal conditions, the closest separation distances were <1 nm.