Miscibility behavior and nanostructure of monolayers of the main phospholipids of Escherichia coli inner membrane

Tunable biomimetic bacterial membranes from binary and ternary lipid mixtures and their application in antimicrobial testing

The reconstruction of accurate yet simplified mimetic models of cell membranes is a very challenging goal of synthetic biology. To date, most of the research focuses on the development of eukaryotic cell membranes, while reconstitution of their prokaryotic counterparts has not been fully addressed, and the proposed models do not reflect well the complexity of bacterial cell envelopes. Here, we describe the reconstitution of biomimetic bacterial membranes with an increasing level of complexity, developed from binary and ternary lipid mixtures. Giant unilamellar vesicles composed of phosphatidylcholine (PC) and phosphatidylethanolamine (PE); PC and phosphatidylglycerol (PG); PE and PG; PE, PG and cardiolipin (CA) at varying molar ratios were successfully prepared by the electroformation method. Each of the proposed mimetic models focuses on reproducing specific membrane features such as membrane charge, curvature, leaflets asymmetry, or the presence of phase separation. GUVs were characterized in terms of size distribution, surface charge, and lateral organization. Finally, the developed models were tested against the lipopeptide antibiotic daptomycin. The obtained results showed a clear dependency of daptomycin binding efficiency on the amount of negatively charged lipid species present in the membrane. We anticipate that the models proposed here can be applied not only in antimicrobial testing but also serve as platforms for studying fundamental biological processes in bacteria as well as their interaction with physiologically relevant biomolecules.

Interactions of Linear Analogues of Battacin with Negatively Charged Lipid Membranes

The increasing resistance of bacteria to available antibiotics has stimulated the search for new antimicrobial compounds with less specific mechanisms of action. These include the ability to disrupt the structure of the cell membrane, which in turn leads to its damage. In this context, amphiphilic lipopeptides belong to the class of the compounds which may fulfill this requirement. In this paper, we describe two linear analogues of battacin with modified acyl chains to tune the balance between the hydrophilic and hydrophobic portion of lipopeptides. We demonstrate that both compounds display antimicrobial activity with the lowest values of minimum inhibitory concentrations found for Gram-positive pathogens. Therefore, their mechanism of action was evaluated on a molecular level using model lipid films mimicking the membrane of Gram-positive bacteria. The surface pressure measurements revealed that both lipopeptides show ability to bind and incorporate into the lipid monolayers, resulting in decreased ordering of lipids and membrane fluidization. Atomic force microscopy (AFM) imaging demonstrated that the exposure of the model bilayers to lipopeptides leads to a transition from the ordered gel phase to disordered liquid crystalline phase. This observation was confirmed by attenuated total reflection Fourier-transform infrared spectroscopy (ATR-FTIR) results, which revealed that lipopeptide action causes a substantial increase in the average tilt angle of lipid acyl chains with respect to the surface normal to compensate for lipopeptide insertion into the membrane. Moreover, the peptide moieties in both molecules do not adopt any well-defined secondary structure upon binding with the lipid membrane. It was also observed that a small difference in the structure of a lipophilic chain, altering the balance between hydrophobic and hydrophilic portion of the molecules, results in different insertion depth of the active compounds.

The impact of antibacterial peptides on bacterial lipid membranes depends on stage of growth

Impact of maculatin 1.1 on supported lipid bilayers (SLBs) derived from early growth phase (EGP) or stationary growth phase (SGP) E. coli lipid extracts, monitored by atomic force microscopy which images bilayer morphology in real time.

Physicochemical and Biological Characterization of Novel Membrane-Active Cationic Lipopeptides with Antimicrobial Properties

We have designed and synthesized new short lipopeptides composed of tetrapeptide conjugated to fatty acids with different chain lengths. The amino acid sequence of the peptide moiety included d-phenylalanine, two residues of l-2,4-diaminobutyric acid and l-leucine. To explore the possible mechanism of lipopeptide action, we have provided a physicochemical characterization of their interactions with artificial lipid membranes. For this purpose, we have used monolayers and bilayers composed of lipids representative of Gram-negative and Gram-positive bacterial membranes. Using surface pressure measurements and atomic force microscopy, we were able to monitor the changes occurring within the films upon exposure to lipopeptides. Our experiments revealed that all lipopeptides can penetrate the lipid membranes and affect their molecular ordering. The latter results in membrane thinning and fluidization. However, the effect is stronger in the lipid films mimicking Gram-positive bacterial membranes. The results of the physicochemical characterization were compared with the biological activity of lipopeptides. The effect of lipopeptides on bacterial growth was tested on several strains of bacteria. It was revealed that lipopeptides show stronger antimicrobial activity against Gram-positive bacteria. At the same time, all tested compounds display relatively low hemolytic activity.

Influence of Cationic Phosphatidylcholine Derivative on Monolayer and Bilayer Artificial Bacterial Membranes

An increasing number of bacterial infections and the rise in antibiotic resistance of a number of bacteria species forces one to search for new antibacterial compounds. The latter facts motivate the investigations presented herein and are aimed at studying the influence of a cationic lipid, 1-palmitoyl-2-oleoyl- sn-glycero-3-ethylphosphocholine (EPOPC), on model (mono- and bilayer) membranes. The monolayer experiments involved the analysis of the interactions of EPOPC with bacterial membrane lipids in one component and mixed systems as well as Brewster angle microcopy studies. The properties of liposomes were analyzed based on the results of dynamic light scattering (DLS) and zeta potential measurements as well as on the experiments concerning the release of calcein entrapped in liposomes after titration with surfactant solution and steady-state fluorescence anisotropy of DPH. The obtained results evidenced that EPOPC, even at low concentrations, strongly changes organization of model systems making them less condensed. Moreover, EPOPC decreases the hydrodynamic diameter of liposomes, increases their zeta potential, and destabilizes model membranes, increasing their fluidity and permeability. Also, the in vitro tests performed on Escherichia coli (Gram-negative) and Staphylococcus aureus (Gram-positive) strains prove that EPOPC has some bacteriostatic properties which seem to be stronger toward Gram-negative than Gram-positive bacteria. All these findings allow one to conclude that EPOPC mode of action may be directly connected with the interactions of EPOPC molecules with bacterial membranes.

Influence of Acyl Chain Saturation on the Membrane-Binding Activity of a Short Antimicrobial Peptide

Different bacterial types and their living environments can lead to different saturations in the chains of their membrane lipids. Such structural differences may influence the efficacy of antibiotics that target bacterial membranes. In this work, the effects of acyl chain saturation on the binding of an antimicrobial peptide G₄ have been examined as a function of the packing density of lipid monolayers by combining external reflection Fourier transform infrared (ER-FTIR) spectroscopy and neutron reflection (NR) measurements. Langmuir monolayers were formed from 1,2-dipalmitoyl-sn-glycero-3-phospho-(1'-rac-glycerol) (DPPG) and 1-palmitoyl-2-oleoyl-sn-glycero-3-phospho-(1'-rac-glycerol) (POPG), respectively, with the initial surface pressures controlled at 8 and 28 mN/m. A reduction in the order of the acyl chains associated with the increase in the layer thickness upon G₄ binding was revealed from ER-FTIR spectroscopy, with peptide binding reaching equilibration faster in POPG than in DPPG monolayers. Whereas the dynamic DPPG-binding process displayed a steady increase in the amide I band area, the POPG-binding process showed little change in the amide area after the initial period. The peptide amide I area from ER-FTIR spectroscopy could be linearly correlated with the adsorbed G₄ amount from NR, irrespective of time, initial pressure, or chain saturation, with clearly more peptide incorporated into the DPPG monolayer. Furthermore, NR revealed that although the peptide was associated with both POPG and DPPG lipid monolayers, it was more extensively distributed in the latter, showing that acyl chain saturation clearly promoted peptide binding and structural disruption.

Interaction of the Antimicrobial Peptides Rhesus θ-Defensin and Porcine Protegrin-1 with Anionic Phospholipid Monolayers

A combination of Langmuir isotherm, Brewster angle microscopy (BAM), and neutron reflectivity studies have been performed to gain insight into the effects on model bacterial cell membranes of the antimicrobial peptides, Rhesus θ-defensin 1 (RTD-1), and porcine protegrin 1 (PG-1). The peptides were interacted with monolayers spread at the air-water interface and prepared from a 3:1 molar mixture of phosphatidylethanolamine and phosphatidylglycerol used to approximate the cell membranes of Gram positive bacteria. The Langmuir film balance measurements show that both peptides perturb the lipid monolayers causing an increase in surface pressure, and the BAM studies show that each results in the formation of small domains within the lipid films, around 5 μm diameter. The overall change in monolayer surface pressure caused by PG-1, however, is a little more pronounced than that due to RTD-1 (+8.5 mN·m(-1) vs +5.5 mN·m(-1)), and the rate of its initial interaction with the monolayer is a little more rapid than that for RTD-1. The neutron reflectivity studies also show differences for PG-1 and RTD-1, with the model fits to these data showing that the more amphiphilic PG-1 becomes fully embedded within the lipid film-causing an extension of the lipid acyl chains but leaving the thickness of the lipid headgroup layer unaffected-while RTD-1 is seen to insert less deeply-causing the same extension of the lipid acyl chains as PG-1 but also causing a significant increase in thickness of the lipid headgroup layer. The various differing effects of the two peptides on anionic lipid monolayers are discussed in the context of their differing hemolytic activities, and their proposed differing propensities to form transmembrane pores.

Surface behavior of peptides from E1 GBV-C protein: Interaction with anionic model membranes and importance in HIV-1 FP inhibition

The interaction between a peptide sequence from GB virus C E1 protein (E1P8) and its structural analogs (E1P8-12), (E1P8-13), and (E1P8-21) with anionic lipid membranes (POPG vesicles and POPG, DPPG or DPPC/DPPG (2:1) monolayers) and their association with HIV-1 fusion peptide (HIV-1 FP) inhibition at the membrane level were studied using biophysical methods. All peptides showed surface activity but leakage experiments in vesicles as well as insertion kinetics in monolayers and lipid/peptide miscibility indicated a low level of interaction: neither E1P8 nor its analogs induced the release of vesicular content and the exclusion pressure values (πe) were clearly lower than the biological membrane pressure (24-30 mN m(-1)) and the HIV-1 FP (35 mN m(-1)). Miscibility was elucidated in terms of the additivity rule and excess free energy of mixing (GE). E1P8, E1P8-12 and E1P8-21 (but not E1P8-13) induced expansion of the POPG monolayer. The mixing process is not thermodynamically favored as the positive GE values indicate. To determine how E1 peptides interfere in the action of HIV-1 FP at the membrane level, mixed monolayers of HIV-1 FP/E1 peptides (2:1) and POPG were obtained. E1P8 and its derivative E1P8-21 showed the greatest HIV-1 FP inhibition. The LC-LE phase lipid behavior was morphologically examined via fluorescence microscopy (FM) and atomic force microscopy (AFM). Images revealed that the E1 peptides modify HIV-1 FP-lipid interaction. This fact may be attributed to a peptide/peptide interaction as indicated by AFM results. Finally, hemolysis assay demonstrated that E1 peptides inhibit HIV-1 FP activity.