Association of poly(4-hydroxystyrene)-block-poly(ethylene oxide) in aqueous solutions: block copolymer nanoparticles with intermixed blocks

Combining branched copolymers with additives generates stable thermoresponsive emulsions with in situ gelation upon exposure to body temperature

Branched copolymer surfactants (BCS) containing thermoresponsive polymer components, hydrophilic components, and hydrophobic termini allow the formation of emulsions which switch from liquid at room temperature to a gel state upon heating. These materials have great potential as in situ gel-forming dosage forms for administration to external and internal body sites, where the emulsion system also allows effective solubilisation of a range of drugs with different chemistries. These systems have been reported previously, however there are many challenges to translation into pharmaceutical excipients. To transition towards this application, this manuscript describes the evaluation of a range of pharmaceutically-relevant oils in the BCS system as well as evaluation of surfactants and polymeric/oligomeric additives to enhance stability. Key endpoints for this study are macroscopic stability of the emulsions and rheological response to temperature. The effect of an optimal additive (methylcellulose) on the nanoscale processes occurring in the BCS-stabilised emulsions is probed by small-angle neutron scattering (SANS) to better comprehend the system. Overall, the study reports an optimal BCS/methylcellulose system exhibiting sol-gel transition at a physiologically-relevant temperature without macroscopic evidence of instability as an in situ gelling dosage form.

Polyelectrolyte/Surfactant Mixtures: A Pathway to Smart Foams

This review deals with liquid foams stabilized by polyelectrolyte/surfactant (PS) complexes in aqueous solution. It briefly reviews all the important aspects of foam physics at several scales, from interfaces to macroscopic foams, needed to understand the basics of these complex systems, focusing on those particular aspects of foams stabilized by PS mixtures. The final section includes a few examples of smart foams based on PS complexes that have been reported recently in the literature. These PS complexes open an opportunity to develop new intelligent dispersed materials with potential in many fields, such as oil industry, environmental remediation, and pharmaceutical industry, among others. However, there is much work to be done to understand the mechanism involved in the stabilization of foams with PS complexes. Understanding those underlying mechanisms is vital to successfully formulate smart systems. This review is written in the hope of stimulating further work in the physics of PS foams and, particularly, in the search for responsive foams based on polymer-surfactant mixtures.

Thermo- and ROS-Responsive Self-Assembled Polymer Nanoparticle Tracers for 19F MRI Theranostics

Fluorine-19 magnetic resonance imaging (¹⁹F MRI) enables detailed in vivo tracking of fluorine-containing tracers and is therefore becoming a particularly useful tool in noninvasive medical imaging. In previous studies, we introduced biocompatible polymers based on the hydrophilic monomer N-(2-hydroxypropyl)methacrylamide (HPMA) and the thermoresponsive monomer N-(2,2-difluoroethyl)acrylamide (DFEA). These polymers have abundant magnetically equivalent fluorine atoms and advantageous properties as ¹⁹F MRI tracers. Furthermore, in this pilot study, we modified these polymers by introducing a redox-responsive monomer. As a result, our polymers changed their physicochemical properties once exposed to an oxidative environment. Reactive oxygen species (ROS)-responsive polymers were prepared by incorporating small amounts (0.9-4.5 mol %) of the N-[2-(ferrocenylcarboxamido)ethyl]acrylamide (FcCEA) monomer, which is hydrophobic and diamagnetic in the reduced electroneutral (Fe(II), ferrocene) state but hydrophilic and paramagnetic in the oxidized (Fe(III), ferrocenium cation) state. This property can be useful for theranostic purposes (therapy and diagnostic purposes), especially, in terms of ROS-responsive drug-delivery systems. In the reduced state, these nanoparticles remain self-assembled with the encapsulated drug but release the drug upon oxidation in ROS-rich tumors or inflamed tissues.

Synthesis and self-assembly of a carborane-containing ABC triblock terpolymer: morphology control on a dual-stimuli responsive system

Amphiphilic triblock terpolymers have attractive applications in the preparation of nanoparticles with controlled morphology.

Effect of Dilution on the Nonequilibrium Polyelectrolyte/Surfactant Association

Polyelectrolyte (PE)/surfactant (S) mixtures play a distinguished role in the efficacy of shampoos and toiletries primarily due to the deposition of PE/S precipitates on the hair surface upon dilution of the formulations. The classical interpretation of this phenomenon is a simple composition change during which the system enters the two-phase region. Recent studies, however, indicated that the phase properties of PE/S mixtures could be strongly affected by the applied solution preparation protocols. In the present work, we aimed at studying the impact of dilution on the nonequilibrium aggregate formation in the sodium poly(styrenesulfonate) (NaPSS)/dodecyltrimethylammonium bromide (DTAB)/NaCl system. Mixtures prepared with hundredfold dilution of concentrated NaPSS/DTAB/NaCl solutions in water were compared with those ones made by rapid mixing of dilute NaPSS/NaCl and DTAB/NaCl solutions. The study revealed that the phase-separation concentration range as well as the composition, morphology, and visual appearance of the precipitates were remarkably different in the two cases. These observations clearly demonstrate that the dilution/deposition process is also related to the nonequilibrium phase properties of PE/S systems, which can be used to modulate the efficiency of various commercial applications.

Preparation of Gold Nanocomposites with Tunable Charge and Hydrophobicity via the Application of Polymer/Surfactant Complexation

During the synthesis of gold nanoparticle (NP) assemblies, the interfacial charge and hydrophobicity of the primary particles play a distinguished role. In the present article, we demonstrate that the association of poly(ethyleneimine) (PEI) capped gold NPs with sodium alkyl sulfates provide a powerful route for the manipulation of these interfacial properties. Dynamic light-scattering, electrophoretic mobility, UV-vis-near-infrared spectroscopy, nanoparticle tracking analysis, and transmission electron microscopy measurements were used to characterize the PEI/surfactant/gold nanoassemblies. The results indicate the formation of gold NPs surrounded by a PEI/surfactant shell with composition-dependent charge and hydrophobicity. The mean size and the aggregation of the nanoassemblies can be fine tuned by the amount of surfactant bound to the primary gold NPs as well as by the application of controlled mixing methods. The specific features of the prepared nanocomposites may be further exploited in next-generation applications.

Electro-optic Kerr effect in the study of mixtures of oppositely charged colloids. The case of polymer-surfactant mixtures in aqueous solutions

In this review I highlight a very sensitive experimental technique for the study of polymer-surfactant complexation: The electro-optic Kerr effect. This review does not intend to be exhaustive in covering the Kerr Effect nor polymer-surfactant systems, instead it aims to call attention to an experimental technique that, even if applied in a qualitative manner, could give very rich and unique information about the structures and aggregation processes occurring in mixtures of oppositely charged colloids. The usefulness of electric birefringence experiments in the study of such systems is illustrated by selected results from literature in hope of stimulating the realization of more birefringence experiments on similar systems. This review is mainly aimed at, but not restricted to, researchers working in polyelectrolyte-surfactant mixtures in aqueous solutions, Kerr effect is a powerful experimental tool that could be used in the study of many systems in diverse areas of colloidal physics.

Impact of Polyelectrolyte Chemistry on the Thermodynamic Stability of Oppositely Charged Macromolecule/Surfactant Mixtures

The complexation between hexadecyl- and dodecyltrimethylammonium bromides (CTAB and DTAB) with sodium poly[(vinyl alcohol)-co-(vinyl sulfate)] (PVAS) copolymer of low charge density has been investigated using pyrene fluorescence spectroscopy, electrophoretic mobility, turbidity, and dynamic light scattering measurements. The results indicate that the binding of the cationic surfactant occurs in three steps. At low surfactant concentrations, the cationic amphiphile binds to the vinyl sulfate groups. Above charge neutralization, surfactant binding may occur on the surface of the hydrophobic vinyl sulfate/CnTAB nanoassemblies. At even higher concentrations, the surfactant binds on the nonionic vinyl alcohol units of the polyion which reswells the PVAS/CnTAB complexes and makes them highly soluble in water. In earlier studies on oppositely charged ionic surfactants and homopolyelectrolytes the impact of mixing protocols was found remarkable, especially at surfactant excess, where these systems can be trapped in the charge stabilized colloidal dispersion state. In contrast, in the case of PVAS/CnTAB mixtures the effect of mixing is less pronounced and diminishes with increasing ionic strength or decreasing alkyl chain length of the surfactant. These findings are rationalized by taking into account the different binding mechanism of surfactants on oppositely charged homopolyelectrolytes and double hydrophilic copolymers.

Fine-tuning the nonequilibrium behavior of oppositely charged macromolecule/surfactant mixtures via the addition of nonionic amphiphiles

The various commercial applications of oppositely charged polyelectrolytes (P) and ionic surfactants (S) with added nonionic amphiphiles initiated intensive research on the polyion/mixed surfactant interaction. A large group of earlier studies revealed that one of the major effects of the nonionic cosurfactants is the suppression of the associative phase separation of P/S systems. In contrast, recent studies indicated that in the dilute surfactant concentration range the added uncharged amphiphile enhances the precipitation concentration range. In order to rationalize these observations, the mixtures of poly(diallyldimethylammonium chloride) (PDADMAC), sodium dodecyl sulfate (SDS), and dodecyl maltoside (C12G2) are investigated using a variety of experimental methods. It is shown that the nonionic cosurfactant has two distinct and competing impacts on the mixed surfactant binding onto the polyions. The composition dependent variation of the chemical potentials of the amphiphiles determines which of these effects is the dominant one, explaining the seemingly diverse earlier observations and their interpretations. We also demonstrate that the nonionic amphiphile affects considerably the nonequilibrium features of polyion/ionic surfactant complexation. Namely, the presence of the uncharged surfactant can destabilize the colloidal dispersion of P/S nanoparticles formed in the two-phase composition range. However, at the same concentration range highly stable dispersions of polyion/mixed surfactant nanoparticles can be produced through the application of a new two-step solution preparation technique. This method is based on the order of addition effect of the two surfactants which can be utilized in future scientific and industrial applications.

Progress in the characterization of bio-functionalized nanoparticles using NMR methods and their applications as MRI contrast agents

Significant progress has been made over the last three decades in the field of NMR, a technique which has proven to have a variety of applications in many scientific disciplines, including nanotechnology. Herein we describe how NMR enables the characterization of nanosystems at different stages of their formation and modification (raw materials, bare or functionalized nanosystems), even making it possible to study in vivo nanoparticle interactions, thereby importantly contributing to nanoparticle design and subsequent optimization. Furthermore, the unique characteristics of nanosystems can open up new prospects for site-targeted, more specific contrast agents, contributing to the development of certain nuclear magnetic resonance applications such as MRI.

The impact of nonionic surfactant additives on the nonequilibrium association between oppositely charged polyelectrolytes and ionic surfactants

The effect of uncharged surfactant additives on the oppositely charged polyion/ionic surfactant complexation is usually described as a direct equilibrium association between the polyelectrolyte molecules and free mixed micelles analogous to the polyion/colloidal particle interactions. This approach predicts that the binding of the ionic surfactant to the polyelectrolyte molecules can be completely suppressed by increasing the nonionic-to-ionic surfactant ratio. In the present work, it is shown that the addition of nonionic surfactants to poly(diallyldimethylammonium chloride)/sodium dodecyl sulfate mixtures considerably enhances the binding of the anionic surfactant to the polycation in the dilute surfactant concentration regime. The dynamic light scattering, turbidity, electrophoretic mobility and fluorescence spectroscopic measurements are consistent with the synergic binding of the ionic and nonionic surfactants to the polyelectrolyte molecules. The enhanced surfactant binding could be utilized for the preparation of stable colloidal dispersions of novel polyion/mixed surfactant nanoparticles over a wide composition range provided that adequate mixing protocols are used. These results clearly indicate that the nonionic surfactant additives can be successfully used to tune the nonequilibrium association of oppositely charged macromolecules and amphiphiles.

Effect of linear nonionic polymer additives on the kinetic stability of dispersions of poly(diallyldimethylammonium chloride)/sodium dodecylsulfate nanoparticles

In this article, the impact of different neutral polymers on the kinetic stability of charge-stabilized poly(diallyldimethylammonium chloride) (PDADMAC)/sodium dodecylsulfate (SDS) colloidal dispersions is analyzed using dynamic light scattering, electrophoretic mobility, turbidity, and coagulation kinetics measurements. Poly(ethyleneoxide) (PEO), poly(vinylpyrrolidone) (PVP), and dextran of comparable molecular masses as well as a higher-molecular-weight dextran sample were tested as nonionic additives. The light scattering and mobility data indicate that the PEO and PVP molecules may adsorb on the surface of the PDADMAC/SDS nanoparticles formed in the presence of excess surfactant. The primary effect of these additives is manifested in enhanced coagulation of the PDADMAC/SDS nanoparticles due to bridging at lower polymer concentrations and depletion flocculation at higher polymer concentrations. These findings are in sharp contrast to the earlier published effect of the same nonionic polymers on the poly(ethyleneimine) (PEI)/SDS colloidal dispersions, which can be sterically stabilized at appropriate PEO or PVP concentrations. However, the adsorption of the investigated dextran samples is negligible on the PDADMAC/SDS nanoparticles. Therefore, dextran molecules may cause only depletion flocculation in the PDADMAC/SDS system in the vicinity of the critical overlap concentration.

Endothelial targeting of polymeric nanoparticles stably labeled with the PET imaging radioisotope iodine-124

Targeting of therapeutics or imaging agents to the endothelium has the potential to improve specificity and effectiveness of treatment for many diseases. One strategy to achieve this goal is the use of nanoparticles (NPs) targeted to the endothelium by ligands of protein determinants present on this tissue, including cell adhesion molecules, peptidases, and cell receptors. However, detachment of the radiolabel probes from NPs poses a significant problem. In this study, we devised polymeric NPs directly labeled with radioiodine isotopes including the positron emission tomography (PET) isotope (124)I, and characterized their targeting to specific endothelial determinants. This approach provided sizable, targetable probes for specific detection of endothelial surface determinants non-invasively in live animals. Direct conjugation of radiolabel to NPs allowed for stable longitudinal tracking of tissue distribution without label detachment even in an aggressive proteolytic environment. Further, this approach permits tracking of NP pharmacokinetics in real-time and non-invasive imaging of the lung in mice using micro-PET imaging. The use of this strategy will considerably improve investigation of NP interactions with target cells and PET imaging in small animals, which ultimately can aid in the optimization of targeted drug delivery.

Unimolecular Janus Micelles by Microenvironment-Induced, Internal Complexation

A noncentrosymmetric, star-shaped polymeric system is presented, which forms unimolecular micelles upon complexation of poly(propylene oxide) (PPO) with poly(dimethylaminoethyl methacrylate) (PDMAEMA). The influence of macromolecular architecture on the hydrophobicity of PPO and its interaction with PDMAEMA is investigated. Within stars, a complex between PPO and PDMAEMA is formed, lowering the interfacial tension of the hydrophobic domain (PDMAEMA acts as a "microsurfactant" for PPO). This leads to a pronounced drop in aggregation number compared to similar diblock copolymers, as corroborated by a scaling approach.