Poly(ε-caprolactone)-banded spherulites and interaction with MC3T3-E1 cells

Maintenance of multipotency of bone marrow mesenchymal stem cells on poly(ε-caprolactone) nanoneedle arrays through the enhancement of cell-cell interaction

Mesenchymal stem cells (MSCs), with high self-renewal ability and multipotency, are commonly used as the seed cells for tissue engineering. However, the reduction and loss of multipotential ability after necessary expansion in vitro set up a heavy obstacle to the clinical application of MSCs. Here in this study, we exploit the autologous crystallization ability of biocompatible poly (ε-caprolactone) (PCL) to obtain uniformly distributed nanoneedle arrays. By controlling the molecular weight of PCL, nanoneedle with a width of 2 μm and height of 50 nm, 80 nm, and 100 nm can be successfully fabricated. After surface chemical modification with polydopamine (PDA), the water contact angle of the fabricated PCL nanoneedle arrays are reduced from 84° to almost 60° with no significant change of the nanostructure. All the fabricated substrates are cultured with bone marrow MSCs (BMMSCs), and the adhesion, spreading, proliferation ability and multipotency of cells on different substrates are investigated. Compared with the BMMSCs cultured on pure PCL nanoneedle arrays, the decoration of PDA can improve the adhesion and spreading of cells and further change them from aggregated distribution to laminar distribution. Nevertheless, the laminar distribution of cultured cells leads to a weak cell-cell interaction, and hence the multipotency of BMMSCs cultured on the PCL-PDA substrates is decimated. On the contrary, the pure PCL nanoneedle arrays can be used to maintain the multipotency of BMMSCs via clustered growth, and the PCL1 nanoneedle array with a height of 50 nm is more promising than the other 2 with regard to the highest proliferation rate and best multipotential differentiation ability of cultured cells. Interestingly, there is a positive correlation between the strength of cell-cell interaction and the multipotency of stem cells in vitro. In conclusion, we have successfully maintained the multipotency of BMMSCs by using the PCL nanoneedle arrays, especially the PCL1 nanoneedle array with a height of 50 nm, as the substrates for in vitro extension, and further revealed the importance of cell-cell interaction on the multipotency of MSCs. The study provides a theoretical basis for the behavioral regulation of MSCs, and is instructive to the design of tissue engineering scaffolds.

Effect of crystallinity and related surface properties on gene expression of primary fibroblasts

The biomaterial-cells interface is one of the most fundamental issues in tissue regeneration. Despite many years of scientific work, there is no clear answer to what determines the desired adhesion of cells and the synthesis of ECM proteins. Crystallinity is a characteristic of the structure that influences the surface and bulk properties of semicrystalline polymers used in medicine. The crystallinity of polycaprolactone (PCL) was varied by changing the molecular weight of the polymer and the annealing procedure. Measurements of surface free energy showed differences related to substrate crystallinity. Additionally, the water contact angle was determined to characterise surface wettability which was crucial in the analysis of protein absorption. X-ray photoelectron spectroscopy was used to indicate oxygen bonds amount on the surface. Finally, the impact of the crystallinity, and related properties were demonstrated on dermal fibroblasts' response. Cellular proliferation and expression of selected genes: α-SMA, collagen I, TIMP, integrin were analysed.

Crystallization-induced mechanofluorescence for visualization of polymer crystallization

The growth of lamellar crystals has been studied in particular for spherulites in polymeric materials. Even though such spherulitic structures and their growth are of crucial importance for the mechanical and optical properties of the resulting polymeric materials, several issues regarding the residual stress remain unresolved in the wider context of crystal growth. To gain further insight into micro-mechanical forces during the crystallization process of lamellar crystals in polymeric materials, herein, we introduce tetraarylsuccinonitrile (TASN), which generates relatively stable radicals with yellow fluorescence upon homolytic cleavage at the central C-C bond in response to mechanical stress, into crystalline polymers. The obtained crystalline polymers with TASN at the center of the polymer chain allow not only to visualize the stress arising from micro-mechanical forces during polymer crystallization via fluorescence microscopy but also to evaluate the micro-mechanical forces upon growing polymer lamellar crystals by electron paramagnetic resonance, which is able to detect the radicals generated during polymer crystallization.

Periodic Fractal-Growth Branching to Nano-Structured Grating Aggregation in Phthalic Acid

Small-molecule phthalic acid (PA), confined in micrometer thin films, was crystallized in the presence of strongly interacting tannic acid (TA) to investigate crystal assembly and correlation between banded patterns and branching structures. Several compositions of the mixture of ethanol/water solutions and evaporation temperatures were also manipulated to investigate the kinetic effects on the morphology of PA crystals. With increasing evaporation rate, the morphology of PA crystals systematically changes from circular-banded spherulites to highly ordered grating-banded patterns. A unique periodic fractal-branch pattern with contrasted birefringent bands exists at intermediate evaporation rate, and this unique grating architecture has never been found in other banded crystals. Crystal assembly of these three periodic morphologies was analyzed by utilizing atomic-force microscopy (AFM) and scanning electron microscopy (SEM) to reveal the mechanisms of formation of hierarchical structures of PA. The detailed growth mechanisms of the novel fractal-branching assembly into circular- or grating-banded patterns are analyzed in this work.

Synthesis of Biodegradable Macroporous Poly(l-lactide)/Poly(ε-caprolactone) Blend Using Oil-in-Eutectic-Mixture High-Internal-Phase Emulsions as Template

We have demonstrated that l-lactide (LLA) forms a eutectic mixture with ε-caprolactone (CL) in a 30:70 mol ratio with a melting point of -19 °C. Taking advantage of the liquid nature and polarity at the LLA-CL eutectic mixture, we have formulated oil-in-eutectic-mixture high-internal-phase emulsions (HIPEs) by stepwise addition of the oil phase (tetradecane) into the continuous phase (mixture of surfactant and LLA-CL eutectic mixture) at room temperature and under stirring. The oil-in-LLA-CL-eutectic-mixture HIPEs were polymerized in the presence of both the organocatalysts 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU) and methanesulfonic acid (MSA) and the initiator benzyl alcohol (BnOH) at 37 °C and without the addition of any extra reagent or solvent in one single pot. The catalytic selectivities of DBU and MSA for the ring-opening polymerizations of LLA and CL, respectively, allowed the synthesis of macroporous poly(l-lactide)/poly(ε-caprolactone) blend materials. The resulting materials exhibited a macroporous morphology that resembled that of the HIPE internal-phase droplets used as templates. These materials proved effective as oil absorbents for oil/water separation with not only a noticeable performance, similar to that of conventional sorbents in terms of both selectivity and recyclability, but also unprecedented safe disposability, certainly of interest for applications in the cleanup of industrial oily wastewaters and oil spills, thanks to the biodegradable features of both poly(ε-caprolactone) and poly(l-lactide).

Poly(L-lactide) crystallization topography directs MC3T3-E1 cells response

Biomaterial surface topography significantly influences cellular form and function. Using poly(L-lactic acid) films with normal spherulites, banded spherulites, and amorphous surfaces as model substrates, we conducted a systematic assessment of the role for polymer crystallization induced surface morphologies on cell growth and contact guidance. Microscopy and image analysis showed that the MC3T3-E1 cells spread out in a random fashion on the amorphous substrate. At 24 h post-seeding, MC3T3-E1 cells on both types of spherulite surfaces were elongated and aligned along the spherulite radius direction. For the banded spherulite surface with radial stripes and coupling annular grooves, the cell orientation and cell nuclear localization were related to the grooves structure. With increasing time, this orientation preference was weaker. These results demonstrate that the patterning of polymer crystallization structure provide important signals for guiding cells to exhibit characteristic orientation and morphology especially in the early stages of regeneration.

Porous three-dimensional carbon nanotube scaffolds for tissue engineering

Assembly of carbon nanomaterials into three-dimensional (3D) architectures is necessary to harness their unique physiochemical properties for tissue engineering and regenerative medicine applications. Herein, we report the fabrication and comprehensive cytocompatibility assessment of 3D chemically crosslinked macrosized (5-8 mm height and 4-6 mm diameter) porous carbon nanotube (CNT) scaffolds. Scaffolds prepared via radical initiated thermal crosslinking of single- or multiwalled CNTs (SWCNTs and MWCNTs) possess high porosity (>80%), and nano-, micro-, and macroscale interconnected pores. MC3T3 preosteoblast cells on MWCNT and SWCNT scaffolds showed good cell viability comparable to poly(lactic-co-glycolic) acid (PLGA) scaffolds after 5 days. Confocal live cell and immunofluorescence imaging showed that MC3T3 cells were metabolically active and could attach, proliferate, and infiltrate MWCNT and SWCNT scaffolds. SEM imaging corroborated cell attachment and spreading and suggested that cell morphology is governed by scaffold surface roughness. MC3T3 cells were elongated on scaffolds with high surface roughness (MWCNTs) and rounded on scaffolds with low surface roughness (SWCNTs). The surface roughness of scaffolds may be exploited to control cellular morphology and, in turn, govern cell fate. These results indicate that crosslinked MWCNTs and SWCNTs scaffolds are cytocompatible, and open avenues toward development of multifunctional all-carbon scaffolds for tissue engineering applications.

"Cross-linked fibrous" spherulites formed from a low molecular weight compound, Fmoc-functionalized phenolic amino acid

While biomacromolecules such as proteins are shown to form fibrous spherulites, which are generally "semicrystalline" in nature, here we show that a simple, low molecular weight compound such as fluorenylmethoxycarbonyl-functionalized phenolic amino acid (Fmoc-l-tyrosine) can form "fibrous" spherulites with highly "cross-linked" microfibrils using the supramolecular self-assembly process.

Combination of positive charges and honeycomb pores to promote MC3T3-E1 cell behaviour

Symmetric poly(l-lactide) (PLLA)-based dendritic l-lysine copolymer, with the PLLA block as the core and the lysine dendrons in the two ends, was prepared through a divergent method. The honeycomb pores on this copolymer film significantly enhanced the MC3T3-E1 cell functions.

In vitro cytocompatibility of one-dimensional and two-dimensional nanostructure-reinforced biodegradable polymeric nanocomposites

This study investigates the in vitro cytocompatibility of one-dimensional and two-dimensional (1D and 2D) carbon and inorganic nanomaterial reinforced polymeric nanocomposites fabricated using biodegradable polymer poly (propylene fumarate), crosslinking agent N-vinyl pyrrolidone (NVP) and following nanomaterials: single and multiwalled carbon nanotubes, single and multiwalled graphene oxide nanoribbons, graphene oxide nanoplatelets, molybdenum disulfide nanoplatelets, or tungsten disulfide nanotubes dispersed between 0.02 and 0.2 wt% concentrations in the polymer. The extraction media of unreacted components, crosslinked nanocomposites and their degradation products were examined for effects on viability and attachment using two cell lines: NIH3T3 fibroblasts and MC3T3 preosteoblasts. The extraction media of unreacted PPF/NVP elicited acute dose-dependent cytotoxicity attributed to leaching of unreacted components into cell culture media. However, extraction media of crosslinked nanocomposites showed no dose dependent adverse effects. Further, all crosslinked nanocomposites showed high viability (78-100%), high cellular attachment (40-55%), and spreading that was confirmed by confocal and scanning electron microscopy. Degradation products of nanocomposites showed a mild dose-dependent cytotoxicity possibly due to acidic degradation components of PPF. In general, compared to PPF control, none of the nanocomposites showed significant differences in cellular response to unreacted components, crosslinked nanocomposites and their degradation products. Initial minor cytotoxic response and lower cell attachment numbers were observed only for a few nanocomposite groups; these effects were absent at later time points for all PPF nanocomposites. The favorable cytocompatibility results for all the nanocomposites opens avenues for in vivo safety and efficacy studies for bone tissue engineering applications.

Biomimetic calcium carbonate concentric microgrooves with tunable widths for promoting MC3T3-E1 cell functions

Biomimetic, self-assembled calcium carbonate (CaCO(3) ) concentric microgrooves with groove widths of 5.0 and 10 μm were fabricated through simply controlling incubation temperature. Mouse pre-osteoblastic MC3T3-E1 cells were cultured on flat and microgrooved substrates of CaCO(3) and their adhesion, spreading, proliferation, alkaline phosphatase activity, and calcium content were remarkably enhanced by the microgrooves, in particular, the narrower ones. Furthermore, focal adhesions and actin filaments of MC3T3-E1 cells could be aligned on both 5.0-μm and 10-μm-wide CaCO(3) grooves. Compared with the original round nuclei on the flat substrates and expanded round nuclei on the narrower microgrooves, the MC3T3-E1 cell nuclei on 10-μm-wide CaCO(3) grooves demonstrated preferred entrapment in the grooves and significant alignment with a smaller area after two-day culture.

Regulating MC3T3-E1 cells on deformable poly(ε-caprolactone) honeycomb films prepared using a surfactant-free breath figure method in a water-miscible solvent

Honeycomb poly(ε-caprolactone) (PCL) films with tunable pore diameters of 3.5, 6.0, and 10 μm were fabricated directly from solutions in water-miscible, relatively nontoxic tetrahydrofuran using the breath-figure method without assistance of a surfactant. These honeycomb PCL films were characterized in terms of structures and enhanced hydrophobicity. Aiming at fostering bone tissue engineering outcomes, we cultured mouse preosteoblastic MC3T3-E1 cells on these honeycomb films as well as on the flat control, and evaluated their adhesion, spreading, proliferation, alkaline phosphatase (ALP) activity, and calcium content. These cell behaviors were further correlated with the expression levels of integrin subunits of α(1), α(2), β(1), and bone-specific gene markers of ALP, collagen type I (COL I), osteocalcin (OCN), and osteopontin (OPN). Honeycomb PCL films remarkably promoted MC3T3-E1 cell adhesion, spreading, proliferation, differentiation, and gene expression. This effect was more prominent when the pore diameter was smaller in the studied range. In addition, honeycomb PCL films were stretched into groove-like structures, on which MC3T3-E1 cells were aligned with a smaller cell area, a higher percentage of aligned cells, and a higher cell elongation ratio when the pores were smaller.

Biodegradable photo-crosslinked polymer substrates with concentric microgrooves for regulating MC3T3-E1 cell behavior

Both intrinsic material properties and topographical features are critical in influencing cell-biomaterial interactions. We present a systematic investigation of regulating mouse pre-osteoblastic MC3T3-E1 cell behavior on biodegradable polymer substrates with distinct mechanical properties and concentric microgrooves. The precursors for fabricating substrates used here were two poly(ϵ-caprolactone) triacrylates (PCLTAs) synthesized from poly(ϵ-caprolactone) triols with molecular weights of ∼7000 and ∼10000 g mol(-1) . These two PCLTAs were photo-crosslinked into PCL networks with distinct thermal, rheological, and mechanical properties at physiological temperature because of their different crystallinities and melting temperatures. Microgrooved substrates with four groove widths of 7.5, 16.1, 44.2, and 91.2 μm and three groove depths of 0.2, 1, and 10 μm were prepared through replica molding, i.e., photo-crosslinking PCLTA on micro-fabricated silicon wafers with pre-designed concentric groove patterns. MC3T3-E1 cell attachment and proliferation could be better supported by the stiffer substrates while not significantly influenced by the microgrooves. Microgroove dimensions could regulate MC3T3-E1 cell alignment, nuclear shape and distribution, mineralization, and gene expression. Among the microgrooves with a fixed depth of 10 μm, the smallest width of 7.5 μm could align and elongate the cytoskeleton and nuclei most efficiently. Strikingly, higher mineral deposition and upregulation of osteocalcin gene expression were found in the narrower microgrooves when the groove depth was 10 μm.