Quaternary ammonium bromide surfactant adsorption on low-index surfaces of gold. 1. Au(111)

Mellitic Acid-Supported Synthesis of Anisotropic Nanoparticles Used as SERS Substrate

A method for the synthesis of a new SERS substrate-anisotropic silver nanoparticles using mellitic acid as a new capping agent is presented. The synthesis is free of toxic substances and does not require special temperature or lighting conditions. Moreover, it is fast, easy, and inexpensive. Depending on the concentration of silver ions and nanoparticle seeds, four different colloids were obtained, representing the evolution of nanoparticle growth along different paths from the first common stage. One of the synthesized colloids consists mainly of triangular nanoplates, while the other consists of polyhedral NPs. The analysis of the synthesis process together with the observation of TEM images and UV-vis extinction spectra enabled the proposal of the mechanism of interaction of mellitic acid molecules as the capping agent. The ability of mellitic acid molecules to form a hydrogen bond network, together with a ratio of silver ions to the mellitic acid concentration, turned out to be crucial for determining the shape of the NPs. All obtained colloids strongly enhance the Raman spectra of analyte molecules, thus proving their applicability as efficient new SERS substrates. For the one that enhanced the spectra the most, the detection limit was set at 10-9 M. Using it as a SERS substrate enables the identification of a trace amount of a designer drug, i.e., 4-chloromethcathinone (4-CMC, clephedrone). For the first time, SERS spectra of this substance, illegal in many countries, are presented.

Colloidal Synthesis of Metal Nanocrystals: From Asymmetrical Growth to Symmetry Breaking

Nanocrystals offer a unique platform for tailoring the physicochemical properties of solid materials to enhance their performances in various applications. While most work on controlling their shapes revolves around symmetrical growth, the introduction of asymmetrical growth and thus symmetry breaking has also emerged as a powerful route to enrich metal nanocrystals with new shapes and complex morphologies as well as unprecedented properties and functionalities. The success of this route critically relies on our ability to lift the confinement on symmetry by the underlying unit cell of the crystal structure and/or the initial seed in a systematic manner. This Review aims to provide an account of recent progress in understanding and controlling asymmetrical growth and symmetry breaking in a colloidal synthesis of noble-metal nanocrystals. With a touch on both the nucleation and growth steps, we discuss a number of methods capable of generating seeds with diverse symmetry while achieving asymmetrical growth for mono-, bi-, and multimetallic systems. We then showcase a variety of symmetry-broken nanocrystals that have been reported, together with insights into their growth mechanisms. We also highlight their properties and applications and conclude with perspectives on future directions in developing this class of nanomaterials. It is hoped that the concepts and existing challenges outlined in this Review will drive further research into understanding and controlling the symmetry breaking process.

SEEDING to Enable Sensitive Electrochemical Detection of Biomarkers in Undiluted Biological Samples

Electrochemical biosensors have shown great potential for simple, fast, and cost-effective point-of-care diagnostic tools. However, direct analysis of complex biological fluids such as plasma has been limited by the loss of sensitivity caused by biofouling. By increasing the surface area, the nanostructured electrode can improve detection sensitivity. However, like a double-edged sword, a large surface area increases the nonspecific adsorption of contaminating proteins. The use of nanoporous structures may prevent fouling proteins. However, there is no straightforward approach for creating nanostructured and nanoporous surfaces compatible with microfabricated thin-film electrodes. Herein, the preferential etching of chloride and surfactant-assisted anisotropic gold reduction to create homogeneous, nanostructured, and nanoporous gold electrodes is demonstrated, yielding a 190 ± 20 times larger surface area within a minute without using templates. This process, "surfactant-based electrochemical etch-deposit interplay for nanostructure/nanopore growth" (SEEDING), on electrodes enhances the sensitivity and antibiofouling capabilities of amperometric biosensors, enabling direct analysis of tumor-derived extracellular vesicles (tEVs) in complex biofluids with a limit of detection of 300 tEVs µL^-1  from undiluted plasma and good discrimination between patients with prostate cancer from healthy ones with an area under the curve of 0.91 in urine and 0.90 in plasma samples.

Crumpled Versus Flat Gold Nanosheets: Temperature-Regulated Synthesis and Their Plasmonic and Catalytic Properties

We report a high-yield synthesis of gold (Au) nanosheets with tunable size and surface morphology in the aqueous phase. In particular, crumpled and flat Au nanosheets with a thickness of ∼10 nm could be selectively produced in high purity when the reaction was conducted at room temperature and in an ice-water bath, respectively. Unlike Au nanoplates/nanoprisms in the form of well-defined triangles or hexagons documented in previous studies, the current products exhibit random in-plane branches or holes, together with wavy edges. Strong absorbance in the NIR region was observed for all the Au nanosheet products. When serving as electrocatalysts for the ethanol oxidation reaction, the current products exhibited an enhanced activity and operation stability, as compared to quasi-spherical counterparts.

Functionalization of Gold Nanostars with Cationic β-Cyclodextrin-Based Polymer for Drug Co-Loading and SERS Monitoring

Gold nanostars (AuNSs) exhibit modulated plasmon resonance and have a high SERS enhancement factor. However, their low colloidal stability limits their biomedical application as a nanomaterial. Cationic β-cyclodextrin-based polymer (CCD/P) has low cytotoxicity, can load and transport drugs more efficiently than the corresponding monomeric form, and has an appropriate cationic group to stabilize gold nanoparticles. In this work, we functionalized AuNSs with CCD/P to load phenylethylamine (PhEA) and piperine (PIP) and evaluated SERS-based applications of the products. PhEA and PIP were included in the polymer and used to functionalize AuNSs, forming a new AuNS-CCD/P-PhEA-PIP nanosystem. The system was characterized by UV–VIS, IR, and NMR spectroscopy, TGA, SPR, DLS, zeta potential analysis, FE-SEM, and TEM. Additionally, Raman optical activity, SERS analysis and complementary theoretical studies were used for characterization. Minor adjustments increased the colloidal stability of AuNSs. The loading capacity of the CCD/P with PhEA-PIP was 95 ± 7%. The physicochemical parameters of the AuNS-CCD/P-PhEA-PIP system, such as size and Z potential, are suitable for potential biomedical applications Raman and SERS studies were used to monitor PhEA and PIP loading and their preferential orientation upon interaction with the surface of AuNSs. This unique nanomaterial could be used for simultaneous drug loading and SERS-based detection.

Electric Fields at Metal-Surfactant Interfaces: A Combined Vibrational Spectroscopy and Capacitance Study

Surfactants modulate interfacial processes. In electrochemical CO₂ reduction, cationic surfactants promote carbon product formation and suppress hydrogen evolution. The interfacial field produced by the surfactants affects the energetics of electrochemical intermediates, mandating their detailed understanding. We have used two complementary tools-vibrational Stark shift spectroscopy which probes interfacial fields at molecular length scales and electrochemical impedance spectroscopy (EIS) which probes the entire double layer-to study the electric fields at metal-surfactant interfaces. Using a nitrile as a probe, we found that at open-circuit potentials, cationic surfactants produce larger effective interfacial fields (∼-1.25 V/nm) when compared to anionic surfactants (∼0.4 V/nm). At a high bulk surfactant concentration, the surface field reaches a terminal value, suggesting the formation of a full layer, which is also supported by EIS. We propose an electrostatic model that explains these observations. Our results help in designing tailored surfactants for influencing electrochemical reactions via the interfacial field effect.

Growth Mechanism of Gold Nanorods: the Effect of Tip-Surface Curvature As Revealed by Molecular Dynamics Simulations

An understanding of the anisotropic growth mechanism of gold nanorods (AuNRs) during colloidal synthesis is critical for controlling the nanocrystal size and shape and thus has implications in tuning the properties for applications in a wide range of research and technology fields. In order to investigate the role of the cetyltrimethylammonium bromide (CTAB) coating in the anisotropic growth mechanism of AuNRs, we used molecular dynamics (MD) simulations and built a computational model that considered explicitly the effect of the curvature of the gold surface on CTAB adsorption and therefore differentiated between the CTAB arrangements on flat and curved surfaces, representing the lateral and tip facets of growing AuNRs, respectively. We verified that on a curved surface, a lower CTAB coverage density and larger intermicellar channels are generated compared to those on a flat surface. Using umbrella sampling simulations, we measured the free energy profile and verified that the environment around a curved surface corresponds to an easier migration from the solution to the gold surface for the [AuBr₂]^- species than does a flat surface. Long unbiased molecular dynamics simulations also corroborated the umbrella sampling results. Therefore, the [AuBr₂]^- diffusion through the environment of the tips is much more favorable than that in the case of lateral facets. This shows that the surface curvature is an essential component of the anisotropic growth mechanism.

Electrochemical investigations of metal nanostructure growth with single crystals

Control over the nanoscopic structure of a material allows one to tune its properties for a wide variety of applications. Colloidal synthesis has become a convenient way to produce anisotropic metal nanostructures with a desired set of properties, but in most syntheses, the facet-selective surface chemistry causing anisotropic growth is not well-understood. This review highlights the recent use of electrochemical methods and single-crystal electrodes to investigate the roles of organic and inorganic additives in modulating the rate of atomic addition to different crystal facets. Differential capacitance and chronocoulometric techniques can be used to extract thermodynamic data on how additives selectively adsorb, while mixed potential theory can be used to observe the effect of additives on the rate of atomic addition to a specific facet. Results to date indicate that these experimental methods can provide new insights into the role capping agents and halides play in controlling anisotropic growth.

AOT Bilayer Adsorption on Gold Surfaces: A Molecular Dynamics Study

A molecular dynamics study was done to reveal the adsorption properties of sodium dioctyl sulfosuccinate (AOT) bilayers on gold Au(111) surfaces. Examining the rotational mobility of AOT molecules, we track that the correlation time of AOT molecules on the adsorbed layer is much higher. The data estimating the diffusive motion of AOT molecule show a substantially lower rate of diffusion (∼10^-10 cm²/s) in the adsorbed layers in comparison to other ones. The results show that an adsorbed layer is more rigid, whereas the outer layers undergo considerable lateral and vertical fluctuations.

Understanding the Seed-Mediated Growth of Gold Nanorods through a Fractional Factorial Design of Experiments

Since the development of simple, aqueous protocols for the synthesis of anisotropic metal nanoparticles, research into many promising, valuable applications of gold nanorods has grown considerably, but a number of challenges remain, including gold-particle yield, robustness to minor impurities, and precise control of gold nanorod surface chemistry. Herein we present the results of a composite fractional factorial series of experiments designed to screen seven additional potential avenues of control and to understand the seed-mediated silver-assisted synthesis of gold nanorods. These synthesis variables are the amount of sodium borohydride used and the rate of stirring when producing seed nanoparticles, the age of and the amount of seeds added, the reaction temperature, the amounts of silver nitrate and ascorbic acid added, and the age of the reduced growth solution before seed nanoparticles are added to initiate rod formation. This statistical experimental design and analysis method, besides determining which experimental variables are important and which are not when synthesizing gold nanorods (and quantifying their effects), gives further insight into the mechanism of growth by measuring the degree to which variables interact with each other by mapping out their mechanistic connections. This work demonstrates that when forming gold nanorods by the reduction of auric ions by ascorbic acid onto seed nanoparticles, ascorbic acid determines how much gold is reduced, and the amount of seeds determine how it is divided, yet both influence the intrinsic growth rates, in both width and length, of the forming nanorods. Furthermore, this work shows that the reduction of gold proceeds via direct reduction on the surface of seeds and not through a disproportionation reaction. Further control over the length of gold nanorods can be achieved by tuning the amount of silver nitrate or the reaction temperature. This work shows that silver does not directly influence rod length or width, and a new primary role for silver is proposed as a catalyst promoting the reduction of gold on the ends of forming nanorods. Furthermore, this silver catalyst is removed from the reaction by adsorption onto the surface of the growing nanorod. This work also demonstrates the importance of freshly prepared silver nitrate and ascorbic acid solutions, free from even a few hours of photodegradation, in preparing gold nanorods with high shape purity and gold yield.

The role of halide ions in the anisotropic growth of gold nanoparticles: a microscopic, atomistic perspective

We provide a microscopic view of the role of halides in controlling the anisotropic growth of gold nanorods through a combined computational and experimental study. Atomistic molecular dynamics simulations unveil that Br(-) adsorption is not only responsible for surface passivation, but also acts as the driving force for CTAB micelle adsorption and stabilization on the gold surface in a facet-dependent way. The partial replacement of Br(-) by Cl(-) decreases the difference between facets and the surfactant density. Finally, in the CTAC solution, no halides or micellar structures protect the gold surface and further gold reduction should be uniformly possible. Experimentally observed nanoparticle's growth in different CTAB/CTAC mixtures is more uniform and faster as the amount of Cl(-) increases, confirming the picture from the simulations. In addition, the surfactant layer thickness measured on nanorods exposed to CTAB and CTAC quantitatively agrees with the simulation results.

Cyanophenyl vs. pyridine substituent: impact on the adlayer structure and formation on HOPG and Au(111)

A new cyano substituted bis(terpyridine) derivative CN-BTP was synthesized and its adsorption on highly oriented pyrolytic graphite (HOPG) and Au(111) was investigated. CN-BTP is closely related to the previously investigated 2,4'-BTP, where the cyanophenyl groups are replaced by pyridine moieties. The scanning tunneling microscopy (STM) investigation of CN-BTP at the liquid|HOPG interface shows a highly ordered herringbone structure that is stabilized by double weak intermolecular C-HN hydrogen bonds, partially through the -CN substituents, which is different from the most stable square structure of 2,4'-BTP. The adsorption processes were investigated using cyclic voltammetry (CV) on Au(111) in a neutral phosphate buffer. A fast and full adlayer formation could be observed with CN-BTP, whereas an extremely slow process with 2,4'-BTP under the same conditions was found. Our data show that the CN substituents on BTP not only change the structure of the monolayer at the liquid|HOPG interface, but also accelerate the phase transition process in the electrolyte dramatically. This could be explained by the adlayer-substrate interactions, which is supported by DFT calculations. Our findings might be extended more generally to further pyridine comprising self-assembling molecules to fine-tune the adlayer structure and phase transition/adsorption kinetics by replacing pyridine by cyanophenyl moieties.

Anisotropic Nanoparticles and Anisotropic Surface Chemistry

Anisotropic nanoparticles are powerful building blocks for materials engineering. Unusual properties emerge with added anisotropy-often to an extraordinary degree-enabling countless new applications. For bottom-up assembly, anisotropy is crucial for programmability; isotropic particles lack directional interactions and can self-assemble only by basic packing rules. Anisotropic particles have long fascinated scientists, and their properties and assembly behavior have been the subjects of many theoretical studies over the years. However, only recently has experiment caught up with theory. We have begun to witness tremendous diversity in the synthesis of nanoparticles with controlled anisotropy. In this Perspective, we highlight the synthetic achievements that have galvanized the field, presenting a comprehensive discussion of the mechanisms and products of both seed-mediated and alternative growth methods. We also address recent breakthroughs and challenges in regiospecific functionalization, which is the next frontier in exploiting nanoparticle anisotropy.

Electrochemical Investigations of 4-Methoxypyridine Adsorption on Au(111) Predict Its Suitability for Stabilizing Au Nanoparticles

A thermodynamic analysis of the adsorption of 4-methoxypyridine (MOP) on Au(111) surfaces is presented in an effort to determine its propensity to stabilize metal nanoparticles. The adsorption of MOP is compared and contrasted to the adsorption of 4-dimethylaminopyridine (DMAP), the latter of which is well-known to form stable Au nanoparticles. Electrochemical studies show that MOP, like most pyridine derivatives, can exhibit two different adsorption states. The electrical state of the metal, the pH of the solution, and the surface crystallography determine whether MOP adopts a low-coverage, π-bonded orientation or a high-coverage, σ-type orientation. A modified Langmuir adsorption isotherm is used to extract free energies of adsorption which are roughly 10% stronger for DMAP compared to MOP at equivalent conditions when expressed on a rational basis. The higher adsorption strength is attributed to DMAP's greater Lewis basicity. Qualitatively, MOP and DMAP adsorption are found to be completely analogous, implying that MOP-protected gold particles should be stable under conditions that favor the high-coverage adsorption state. Using a previously reported, single-phase synthesis, this is shown to be the case.

Gap separation-controlled nanogap electrodes by molecular ruler electroless gold plating

Molecular ruler electroless plated (MoREP) nanogap electrodes: gap separation can be controlled between 2.5 and 3.3 nm by surfactant C_nTAB.

Recovery and redispersion of gold nanoparticles using the self-assembly of a pH sensitive zwitterionic amphiphile

The pH-responsive self-assembly of a zwitterionic amphiphile was expanded to the recovery of gold (Au) nanoparticles. Multilayered lamellae were incorporated into the nanoparticles. Redispersion of nanoparticles was achieved by the transition of self-assembly based on pH.

Cu(ii)–alkyl amine complex mediated hydrothermal synthesis of Cu nanowires: exploring the dual role of alkyl amines

The complex formation of Cu²⁺ ions with alkyl amines is a prerequisite for Cu nanowire synthesis. Slow reduction of this complex allows for the generation of twinned seeds, which are later grown into nanowires.

A joint experimental and computational search for authentic nano-electrocatalytic effects: electrooxidation of nitrite and L-ascorbate on gold nanoparticle-modified glassy carbon electrodes

The investigation of electrocatalytic nanoeffects is tackled via joint electrochemical measurements and computational simulations. The cyclic voltammetry of electrodes modified with metal nanoparticles is modeled considering the kinetics of the electrochemical process on the bulk materials of the different regions of the electrode, that is, the substrate (glassy carbon) and the nanoparticles (gold). Comparison of experimental and theoretical results enables the detection of changes in the electrode kinetics at the nanoscale due to structural and/or electronic effects. This approach is applied to the experimental assessment of electrocatalytic effects by gold nanoparticles (Au NPs) in the electrooxidation of nitrite and L-ascorbate. Glassy carbon electrode is modified with Au NPs via seed-mediated growth method. Divergence between the kinetics of these processes on gold macroelectrodes and gold nanoparticles is examined. Whereas claimed catalytic effects are not observed in the electrooxidation of nitrite, electrocatalytic nanoeffects are verified in the case of L-ascorbate. This is probably due to that the electron transfer process follows an adsorptive mechanism. The combination of simulation with experiments is commended as a general strategy of authentification, or not, of nanoelectrocatalytic effects.