What is the role of the interfacial interaction in the slow relaxation of nanometer-thick polymer melts on a solid surface?

Effect of Solid Substrates on the Molecular Structure of Ionic Liquid Nanofilms

Fundamental understandings of the interfacial molecular structure of solid-confined ionic liquids (ILs) have significant impacts on the development of many cutting-edge applications. Among the extensive studies on the molecular structure at the IL/solid interface, direct observation of a double-layering quantized growth of [C_nmim][FAP] on mica was recently reported. In the current work, the atomic force microscopy (AFM) results directly show that the growths of [Bmim][FAP] nanofilms on silica and amorphous carbon are different from the double-layering growth on mica. The growth of [Bmim][FAP] nanofilms on silica is dominated by the aggregation of the IL molecules, which can be attributed to the inadequate negative charging of the silica surface resulting in a weak electrostatic interaction between silica and the IL cation. [Bmim][FAP] on amorphous carbon shows a fairly smooth film for the thinner nanofilms, which can be attributed to the π-π⁺ parallel stacking between the cation imidazolium ring and the randomly distributed sp² carbon on the amorphous carbon surface. Our findings highlight the effect of different IL/solid interactions, among the several competing interactions at the interface, on the resulting molecular arrangements of various IL.

Intrinsic structure and dynamics of monolayer ring polymer melts

We present the general structural and dynamical characteristics of flexible ring polymers in narrowly confined two-dimensional (2D) melt systems using atomistic molecular dynamics simulations. The results are further analyzed via direct comparison with the 2D linear analogue as well as the three-dimensional (3D) ring and linear melt systems. It is observed that dimensional restriction in 2D confined systems results in an increase in the intrinsic chain stiffness of the ring polymer. Fundamentally, this arises from an entropic penalty on polymer chains along with a reduction in the available chain configuration states in phase space and spatial choices for individual segmental walks. This feature in combination with the intermolecular interactions between neighboring ring chains leads to an overall extended interpenetrated chain configuration for the 2D ring melt. In contrast to the generally large differences in structural and dynamical properties between ring and linear polymers in 3D melt systems, relatively similar local-to-global chain structures and dynamics are observed for the 2D ring and linear melts. This is attributed to the general structural similarity (i.e., extended double-stranded chain conformations), the less effective role of the chain ends, and the absence of complex topological constraints between chains (i.e., interchain entanglement and mutual ring threading) in the 2D confined systems compared with the corresponding 3D bulk systems.

Direct observation of the double-layering quantized growth of mica-confined ionic liquids

Since the interface between ionic liquids (ILs) and solids always plays a critical role in important applications such as coating, lubrication, energy storage and catalysis, it is essential to unravel the molecular structure and dynamics of ILs confined to solid surfaces. Here we report direct observation of a unique double-layering quantized growth of three IL (i.e. [Emim][FAP], [Bmim][FAP] and [Hmim][FAP]) nanofilms on mica. AFM results show that the IL nanofilms initially grow only by covering more surface areas at the constant film thickness of 2 monolayers (ML) until a quantized increase in the film thickness by another 2 ML occurs. Based on the AFM results, we propose a double-layering model describing the molecular structure of IL cations and anions on the mica surface. The interesting double-layering structure can be explained as the result of several competing interactions at the IL-mica interface. Meanwhile, the time-dependent AFM results indicate that the topography of IL nanofilms could change with time and mobility of the nanofilm is lower for ILs with longer alkyl chains, which can be attributed to the stronger solvophobic interaction. The findings here have important implications on the molecular structure and dynamics of ILs confined to solid surfaces.

3D-Printed Repeating Re-Entrant Topography to Achieve On-Demand Wettability and Separation

While it is difficult and expensive to fabricate a complicated surface structure via conventional techniques, three-dimensional (3D) printing serves as a time-efficient and cost-efficient alternative. In the current study, a novel repeating re-entrant topography is fabricated by two-photon polymerization 3D printing. The experimental results show that the repeating re-entrant surface enhances the desired on-demand surface wettability. Moreover, the 3D-printed membranes with the repeating re-entrant structures enable the efficient on-demand separation of liquid mixtures with high flux, which is critical for the wastewater treatment in the chemical industry.

Adhesion and friction in polymer films on solid substrates: conformal sites analysis and corresponding surface measurements

In this work, we present a statistical mechanical analysis to elucidate the molecular-level factors responsible for the static and dynamic properties of polymer films. This analysis, which we term conformal sites theory, establishes that three dimensionless parameters play important roles in determining differences from bulk behavior for thin polymer films near to surfaces: a microscopic wetting parameter, α_wx, defined as the ratio of polymer-substrate interaction to polymer-polymer interaction; a dimensionless film thickness, H*; and dimensionless temperature, T*. The parameter α_wx introduced here provides a more fundamental measure of wetting than previous metrics, since it is defined in terms of intermolecular forces and the atomic structure of the substrate, and so is valid at the nanoscale for gas, liquid or solid films. To test this theoretical analysis, we also report atomic force microscopy measurements of the friction coefficient (μ), adhesion force (F_A) and glass transition temperature (T_g) for thin films of two polymers, poly(methyl methacrylate) (PMMA) and polystyrene (PS), on two planar substrates, graphite and silica. Both the friction coefficient and the glass transition temperature are found to increase as the film thickness decreases, and this increase is more pronounced for the graphite than for the silica surface. The adhesion force is also greater for the graphite surface. The larger effects encountered for the graphite surface are attributed to the fact that the microscopic wetting parameter, α_wx, is larger for graphite than for silica, indicating stronger attraction of polymer chains to the graphite surface.

Fabricating Nanometer-Thick Simultaneously Oleophobic/Hydrophilic Polymer Coatings via a Photochemical Approach

The simultaneously oleophobic/hydrophilic coatings are highly desirable in antifogging, oil-water separation, and detergent-free cleaning. However, such coatings require special chemical structure, i.e., perfluorinated backbone and polar end-groups, and are too expensive for real-life application. Here, we have developed an UV-based photochemical approach to make nanometer-thick perfluoropolyethers without polar end-groups, which are not intrinsically simultaneously oleophobic/hydrophilic but cost-effective, become simultaneously oleophobic/hydrophilic. The contact angle, ellipsometry, and X-ray photoelectron spectroscopy (XPS) results indicated that the UV irradiation results in the covalent bonding between the polymer and the substrate, which renders more ordered packing of polymer chains and thus the appropriately small interchain distance. As a result, the small water molecules penetrate the polymer network while large oil molecules do not. As a result, the oil contact angle is larger than the water contact angle and the coating shows the simultaneous oleophobicity/hydrophilicity. Moreover, we also demonstrated that this nanometer-thick simultaneously oleophobic/hydrophilic coating has improved long-term antifogging performance and detergent-free cleaning capability and is mechanically robust. The photochemical approach established here potentially can be applied on many other polymers and greatly accelerate the development and application of simultaneously oleophobic/hydrophilic coatings.

Molecularly thin fluoro-polymeric nanolubricant films: tribology, rheology, morphology, and applications

Molecularly thin perfluoropolyether (PFPE) has been used extensively as a high-performance lubricant in various applications and, more importantly, on carbon overcoats to enhance the reliability and lubrication of micro-/nanoelectro-mechanical systems, where the tribological performance caused by its molecular architecture is a critical issue, as are its physical properties and rheological characteristics. This Highlight addresses recent trends in the development of fluoro-polymeric lubricant films with regard to their tribology, rheology, and physio-chemical properties as they relate to heat-assisted magnetic recording. Nanorheology has been employed to examine the dynamic response of nonfunctional and functional PFPEs, while the viscoelastic properties of nanoscale PFPE films and the relaxation processes as a function of molecular structure and end-group functionality were analyzed experimentally; furthermore, the characteristics of binary blends were reported.

Effect of π-π+ stacking on the layering of ionic liquids confined to an amorphous carbon surface

In the current paper, AFM studies were conducted on nanometer-thick ionic liquids (ILs) confined to an amorphous carbon (AC) surface, which is critical to the design of the next-generation media lubricant for hard disk drives (HDDs). The results indicated that the existence of the delocalized ring in the cation is critical to layering of ILs. Extended layering was observed only when there is imidazolium ring in the cation. When the imidazolium ring is replaced by an aliphatic moiety, "drop-on-layer" (dewetting) structure was observed. On the basis of the experimental results, we proposed that π-π+ stacking between sp(2) carbon in the AC and the imidazolium cation in the ILs is the key to the extended layering of ILs at the ILs/AC interface.