Self-assembled supramolecular gels of reverse poloxamers and cyclodextrins

Cyclodextrin-Induced Suppression of PEG Crystallization from the Melt in a PEG-Peptide Conjugate

The influence of alpha-cyclodextrin (αCD) on PEG crystallization is examined for a peptide-PEG conjugate, YYKLVFF-PEG3k comprising an amyloid peptide YYKLVFF linked to PEG with molar mass 3 kg mol-1. Remarkably, differential scanning calorimetry (DSC) and simultaneous synchrotron small-angle/wide-angle X-ray scattering (SAXS/WAXS) show that crystallization of PEG is suppressed by αCD, provided that the cyclodextrin content is sufficient. A hexagonal mesophase is formed instead. The αCD threading reduces the conformational flexibility of PEG, and hence suppresses crystallization. These results show that addition of cyclodextrins can be used to tune the crystallization of peptide-polymer conjugates and potentially other polymer/biomolecular hybrids.

Double-crosslinkable poly(urethane)-based hydrogels relying on supramolecular interactions and light-initiated polymerization: promising tools for advanced applications in drug delivery

Physical and chemical hydrogels are promising platforms for tissue engineering/regenerative medicine (TERM). In particular, physical hydrogels are suitable for use in the design of drug delivery systems owing to their reversibility and responsiveness to applied stimuli and external environment. Alternatively, the use of chemical hydrogels represents a better strategy to produce stable 3D constructs in the TERM field. In this work, these two strategies were combined to develop multi-functional formulations integrating both drug delivery potential and TERM approaches in a single device. Specifically, a novel photo-sensitive poly(ether urethane) (PEU) was developed to form supramolecular networks with α-cyclodextrins (α-CDs). The PEU was successfully synthesized using Poloxamer® 407, 1,6-diisocyanatohexane and 2-hydroxyethyl methacrylate, as assessed by infrared spectroscopy, size exclusion chromatography and proton nuclear magnetic resonance (1H NMR) spectroscopy. Subsequently, PEU thermo-responsiveness was characterized through critical micelle temperature evaluation and dynamic light scattering analyses, which suggested the achievement of a good balance between molecular mass and overall hydrophobicity. Consequently, the formation of supramolecular domains with α-CDs was demonstrated through X-ray diffraction and 1H NMR spectroscopy. Supramolecular hydrogels with remarkably fast gelation kinetics (i.e., few minutes) were designed using a low PEU concentration (≤5% w/v). All formulations were found to be cytocompatible according to the ISO 10993-5 regulation. Notably, the hydrogels were observed to possess mechanical properties and self-healing ability, according to rheological tests, and their fast photo-crosslinking was evidenced (<60 s) by photo-rheology. A high curcumin payload (570 μg mL-1) was encapsulated in the hydrogels, which was released with highly tunable and progressive kinetics in a physiological-simulated environment for up to 5 weeks. Finally, a preliminary evaluation of hydrogel extrudability was performed using an extrusion-based bioprinter, obtaining 3D-printed structures showing good morphological fidelity to the original design. Overall, the developed hydrogel platform showed promising properties for application in the emerging field of regenerative pharmacology as (i) easily injectable drug-loaded formulations suitable for post-application stabilization through light irradiation, and (ii) biomaterial inks for the fabrication of patient-specific drug-loaded patches.

Tuning the Solution Self-Assembly of a Peptide-PEG (Polyethylene Glycol) Conjugate with α-Cyclodextrin

Cyclodextrins are saccharide ring molecules which act as host cavities that can encapsulate small guest molecules or thread polymer chains. We investigate the influence of alpha-cyclodextrin (αCD) on the aqueous solution self-assembly of a peptide-polymer conjugate YYKLVFF-PEG3K previously studied by our group [Castelletto et al., Polym. Chem., 2010, 1, 453-459]. This conjugate comprises a designed amyloid-forming peptide YYKLVFF that contains the KLVFF sequence from Amyloid β peptide, Aβ16-20, along with two aromatic tyrosine residues to enhance hydrophobicity, as well as polyethylene glycol PEG with molar mass 3 kg mol-1 . The conjugate self-assembles into β-sheet fibrils in aqueous solution. Here we show that complexation with αCD instead generates free-floating nanosheets in aqueous solution (with a β-sheet structure). The nanosheets comprise a bilayer with a hydrophobic peptide core and highly swollen PEG outer layers. The transition from fibrils to nanosheets is driven by an increase in the number of αCD molecules threaded on the PEG chains, as determined by 1 H NMR spectroscopy. These findings point to the use of cyclodextrin additives as a powerful means to tune the solution self-assembly in peptide-polymer conjugates and potentially other polymer/biomolecular hybrids.

Solid implantable devices for sustained drug delivery

Implantable drug delivery systems (IDDS) are an attractive alternative to conventional drug administration routes. Oral and injectable drug administration are the most common routes for drug delivery providing peaks of drug concentrations in blood after administration followed by concentration decay after a few hours. Therefore, constant drug administration is required to keep drug levels within the therapeutic window of the drug. Moreover, oral drug delivery presents alternative challenges due to drug degradation within the gastrointestinal tract or first pass metabolism. IDDS can be used to provide sustained drug delivery for prolonged periods of time. The use of this type of systems is especially interesting for the treatment of chronic conditions where patient adherence to conventional treatments can be challenging. These systems are normally used for systemic drug delivery. However, IDDS can be used for localised administration to maximise the amount of drug delivered within the active site while reducing systemic exposure. This review will cover current applications of IDDS focusing on the materials used to prepare this type of systems and the main therapeutic areas of application.

Preparation of stereocomplex and pseudo-polyrotaxane with various cyclodextrins as wheel components using triblock copolymer of poly(ethylene glycol) and polylactide

The ABA-type triblock-copolymers (BCPs) of polylactide (PLA) and poly(ethylene glycol) (PEG) were synthesized as axle components for rotaxane formation. It is known that α-cyclodextrin (CD) exists near the PEG moiety in pseudo-polyrotaxane (PPRX), and the PLA moiety can form a stereocomplex (SC), by mixing with L- and D-isomers. In this study, various CDs, including β-CD and γ-CD, were used as wheel components, and effects of CD structures on both PPRX and SC formations were studied. The solubility of CDs is influenced to form the PPRX, resulting in differing numbers of CDs in the axle. PPRX structures were investigated by ¹H NMR, NOESY, and DOSY, and SC structures were investigated by FT-IR and XRD. Their thermal properties were also evaluated by DSC and TGA, to consider the physical properties of the simultaneous formation of PPRX and SC. This study gave insight into the complicated host-guest and polymer-polymer interactions.

Inclusion Complexes of Rifampicin with Native and Derivatized Cyclodextrins: In Silico Modeling, Formulation, and Characterization

Inclusion complexation of rifampicin (RIF) with several types of cyclodextrins (βCD, hydroxypropyl-βCD, γCD, hydroxypropyl-γCD) in aqueous solutions at different pH values was investigated to assess the interactions between RIF and cyclodextrins (CDs). Molecular modeling was performed to determine the possible interactions between RIF and CDs at several pH values. The inclusion complexes were characterized by differential scanning calorimetry, Fourier transform infrared spectroscopy, powder X-ray diffractometry, and scanning electron microscopy. Moreover, this study evaluated the dissolution profile and antibacterial activity of the formed complexes. Phase solubility analysis suggested the formation of RIF-CD affirmed 1:1 stoichiometry at all pH values (except RIF-βCD at pH 4.0 and both βCD and γCD at pH 9.0). The inclusion complexation of RIF with CD successfully increased the percentage of RIF released in in vitro studies. The inclusion complexes of RIF exhibited more than 60% of RIF released in 2 h which was significantly higher (p < 0.05) than release of pure RIF, which was only less than 10%. Antibacterial activity of RIF-CD complexes (measured by the minimum inhibitory concentration of RIF against Staphylococcus aureus and methicillin-resistant Staphylococcus aureus) was lower for both RIF-βCD and RIF-HPγCD at pH 7.0 to pure RIF suspension. In conclusion, this work reports that both βCD and γCD can be used to enhance the solubility of RIF and thus, improve the effectivity of RIF by decreasing the required daily dose of RIF for the treatment of bacterial infections.

Development and validation of a high-performance liquid chromatography method for levothyroxine sodium quantification in plasma for pre-clinical evaluation of long-acting drug delivery systems

Levothyroxine (LEVO) sodium is an FDA-approved drug that is used to treat underactive thyroid (hypothyroidism) and other conditions. It is generally used as a thyroid-stimulating hormone administered orally. However, this approach has some drawbacks such as this drug should be taken every day 30 min to 1 h prior to breakfast with an empty stomach, moreover, some food interactions must be monitored. Thus, alternative innovative approaches capable of providing sustained LEVO release should be developed. Our research was designed to establish a simple quantitative determination method for LEVO in rat plasma for pre-clinical evaluation of long acting formulations using a high-performance liquid chromatography method, to validate the analytical method according to ICH guidelines and to characterise its pharmacokinetic behavior in rats. After simple protein precipitation with acetonitrile, LEVO was eluted on a Xselect CSH™ C18 column (Waters, 3.0 × 150 mm) with a particle size of 3.5 μm using a mobile phase of water and acetonitrile at a ratio of 65 : 35% v/v, including 0.1% v/v of trifluoracetic acid. The calibration standards used for plasma ranged between 0.5-1000 ng mL^-1 with a correlation coefficient (r²) of ≥0.998. The limit of detection was 0.44 ng mL^-1 and the lower limit of quantitation was 1.33 ng mL^-1. The extraction recovery of LEVO in rat plasma samples by this method was between 80 and 85%. The method was selective, sensitive, accurate and precise for detecting and quantifying LEVO in a pharmacokinetic study carried out in rats for pre-clinical evaluation of long acting formulations. The validated HPLC method meets the ICH established requirements and therefore offers a wide range of potential applications in pre-clinical therapeutic drug monitoring, pharmacokinetics and toxicology.

HPLC method for levothyroxine quantification in long-acting drug delivery systems. Validation and evaluation of bovine serum albumin as levothyroxine stabilizer

Deficiency of thyroid hormones (hypothyroidism) is treated with oral levothyroxine (LEVO). However, the effectiveness of oral administration is highly dependent on the co-administration of food and other drugs. This factor, in combination with the chronic nature of this condition, mean that there are concerns with patient compliance. Development of long acting formulations to treat hypothyroidism could potentially solve this problem. However, LEVO instability in solution could be problematic. In order to develop long acting LEVO delivery systems in vitro drug release experiments should be carried out. However, short term LEVO stability in aqueous solution will prevent this. BSA was used as a stabiliser for LEVO; extending the stability of the drug in aqueous solutions from a few hours to 2 weeks. In order to achieve this, the required concentration of the protein was 0.1% w/v. Subsequently, an HPLC method capable of separating LEVO from the protein was developed and validated following ICH guidelines. The analysis was carried out using a reverse phase HPLC method on an Agilent 1220 Infinity II LC system. The column used to achieve separation was a Zorbax Eclipse plus C18 (95 Å pore size, 250 mm length x 4.6 mm internal diameter; 5 μm particle size). The mobile phase used was composed of acetonitrile and 0.1% trifluoroacetic acid at a ratio of 50:50% v/v. UV detection of LEVO sodium was carried out at 225 nm. The retention time for the drug was 6.6 minutes. The method showed a limit of detection of 0.03 μg/mL and a limit of quantification of 0.09 μg/mL. Finally, this method was used to evaluate the release from implants containing 20% w/w of LEVO. These devices were prepared using a solvent casting method with poly(caprolactone) and LEVO. These devices showed an initial burst release over the first 3 days. Subsequently, they were capable of providing a linear release rate over the following 25 days.

Supramolecular hydrogels based on custom-made poly(ether urethane)s and cyclodextrins as potential drug delivery vehicles: design and characterization

A library of poly(ether urethane)-based supramolecular hydrogels was designed, showing quick gelation, no phase separation, remarkable mechanical and self-healing properties.

α-Cyclodextrin-Based Polypseudorotaxane Hydrogels

Supramolecular hydrogels that are based on inclusion complexes between α-cyclodextrin and (co)polymers have gained significant attention over the last decade. They are formed via dynamic noncovalent bonds, such as host-guest interactions and hydrogen bonds, between various building blocks. In contrast to typical chemical crosslinking (covalent linkages), supramolecular crosslinking is a type of physical interaction that is characterized by great flexibility and it can be used with ease to create a variety of "smart" hydrogels. Supramolecular hydrogels based on the self-assembly of polypseudorotaxanes formed by a polymer chain "guest" and α-cyclodextrin "host" are promising materials for a wide range of applications. α-cyclodextrin-based polypseudorotaxane hydrogels are an attractive platform for engineering novel functional materials due to their excellent biocompatibility, thixotropic nature, and reversible and stimuli-responsiveness properties. The aim of this review is to provide an overview of the current progress in the chemistry and methods of designing and creating α-cyclodextrin-based supramolecular polypseudorotaxane hydrogels. In the described systems, the guests are (co)polymer chains with various architectures or polymeric nanoparticles. The potential applications of such supramolecular hydrogels are also described.

Hydrogenation of hydrophobic substrates catalyzed by gold nanoparticles embedded in Tetronic/cyclodextrin-based hydrogels

Hydrogenation of alkenes, alkynes and aldehydes was investigated under biphasic conditions using Au nanoparticles (AuNP) embedded into combinations of α-cyclodextrin (α-CD) and a poloxamine (Tetronic®90R4).

Hydrogels based on poly(methyl vinyl ether-co-maleic acid) and Tween 85 for sustained delivery of hydrophobic drugs

Hydrogels based on poly(methyl vinyl ether-co-maleic acid) and Tween 85 were prepared for hydrophobic drug delivery. The hydrogels were synthesized following a simple procedure carried out in solid state. The process did not require the use of any solvent and, as it is based on an esterification reaction, no toxic by-products were obtained. The resulting hydrogels contained Tween 85 inside the structure and due to the amphiphilic nature of this compound, hydrophobic domains within the hydrogel structure were formed. The obtained hydrogels showed good swelling capacities ranging from 100% to 600%. The esterification reaction that took place between poly(methyl vinyl ether-co-maleic acid) and Tween 85 was confirmed by infrared spectroscopy. Hydrogels were loaded with a hydrophobic drug model, Curcumin (CUR), showing that the hydrogels were able to retain up to 36 mg of CUR per g of hydrogel. Additionally, the synthesized hydrogels provided in vitro sustained CUR release over periods of up to 30 days. Finally, and due to the mucoadhesive nature of the prepared materials, one of the hydrogels was tested in vitro as an oral drug delivery system. For this purpose, the selected material was milled into microparticles (45-90 µm diameter). The release of CUR from the microparticles was evaluated under simulated gastric and intestinal conditions. The microparticles were able to release their cargos in 7 h. However, further work is required to optimize this system for oral drug delivery applications.

Cyclodextrin-based host–guest supramolecular hydrogel and its application in biomedical fields

CD-based host–guest supramolecular hydrogels and their potential biomedical application.

Weak Bond-Based Injectable and Stimuli Responsive Hydrogels for Biomedical Applications

Here we define hydrogels crosslinked by weak bonds as physical hydrogels. They possess unique features including reversible bonding, shear thinning and stimuli-responsiveness. Unlike covalently crosslinked hydrogels, physical hydrogels do not require triggers to initiate chemical reactions for in situ gelation. The drug can be fully loaded in a pre-formed hydrogel for delivery with minimal cargo leakage during injection. These benefits make physical hydrogels useful as delivery vehicles for applications in biomedical engineering. This review focuses on recent advances of physical hydrogels crosslinked by weak bonds: hydrogen bonds, ionic interactions, host-guest chemistry, hydrophobic interactions, coordination bonds and π-π stacking interactions. Understanding the principles and the state of the art of gels with these dynamic bonds may give rise to breakthroughs in many biomedical research areas including drug delivery and tissue engineering.

Tetronics/cyclodextrin-based hydrogels as catalyst-containing media for the hydroformylation of higher olefins

The rhodium-catalyzed hydroformylation of alkenes has been investigated under biphasic conditions using combinations of α-cyclodextrin (α-CD) and poloxamines (Tetronics®).

Supramolecular Nanostructures Based on Cyclodextrin and Poly(ethylene oxide): Syntheses, Structural Characterizations and Applications for Drug Delivery

Cyclodextrins (CDs) have been extensively studied as drug delivery carriers through host⁻guest interactions. CD-based poly(pseudo)rotaxanes, which are composed of one or more CD rings threading on the polymer chain with or without bulky groups (or stoppers), have attracted great interest in the development of supramolecular biomaterials. Poly(ethylene oxide) (PEO) is a water-soluble, biocompatible polymer. Depending on the molecular weight, PEO can be used as a plasticizer or as a toughening agent. Moreover, the hydrogels of PEO are also extensively studied because of their outstanding characteristics in biological drug delivery systems. These biomaterials based on CD and PEO for controlled drug delivery have received increasing attention in recent years. In this review, we summarize the recent progress in supramolecular architectures, focusing on poly(pseudo)rotaxanes, vesicles and supramolecular hydrogels based on CDs and PEO for drug delivery. Particular focus will be devoted to the structures and properties of supramolecular copolymers based on these materials as well as their use for the design and synthesis of supramolecular hydrogels. Moreover, the various applications of drug delivery techniques such as drug absorption, controlled release and drug targeting based CD/PEO supramolecular complexes, are also discussed.

Selective tuning of the self-assembly and gelation of a hydrophilic poloxamine by cyclodextrins

Complexes formed between cyclodextrins (CDs) and polymers - pseudopolyrotaxanes (PPRs) - are the starting point of a multitude of supramolecular structures, which are proposed for a wide range of biomedical and technological applications. In this work, we investigate the complexation of a range of cyclodextrins with Tetronic T1307, a four-arm block copolymer of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) with a pH-responsive central ethylene diamine spacer, and its impact on micellization and the sol-gel transition. At low concentrations, small-angle neutron scattering (SANS) combined with dynamic light scattering (DLS) measurements show the presence of spherical micelles with a highly hydrated shell and a dehydrated core. Increasing the temperature leads to more compact micelles and larger aggregation numbers, whereas acidic conditions induce a shrinking of the micelles, with fewer unimers per micelle and a more hydrated corona. At high concentrations, T1307 undergoes a sol-gel transition, which is suppressed at pH below the pKa,1 (4.6). SANS data analysis reveals that the gels result from a random packing of the micelles, which have an increasing aggregation number and increasingly dehydrated shell and hydrated core with the temperature. Native CDs (α, β, γ-CD) can complex T1307, resulting in the precipitation of a PPR. Instead, modified CDs compete with micellization to an extent that is critically dependent on the nature of the substitution. (1)H and ROESY NMR combined with SANS demonstrate that dimethylated β-CD can thread onto the polymer, preferentially binding to the PO units, thus hindering self-aggregation by solubilizing the hydrophobic block. The various CDs are able to modulate the onset of gelation and the extent of the gel phase, and the effect correlates with the ability of the CDs to disrupt the micelles, with the exception of a sulfated sodium salt of β-CD, which, while not affecting the CMT, is able to fully suppress the gel phase.

Modulating the self-assembly of amphiphilic X-shaped block copolymers with cyclodextrins: structure and mechanisms

Inclusion complexes between cyclodextrins and polymers-so-called pseudopolyrotaxanes (PPR)-are at the origin of fascinating supramolecular structures, which are finding increasing uses in biomedical and technological fields. Here we explore the impact of both native and a range of modified cyclodextrins (CD) on the self-assembly of X-shaped poly(ethylene oxide)-poly(propylene oxide) block copolymers, so-called Tetronics or poloxamines, by focusing on Tetronic 904 (T904, Mw 6700). The effects are markedly dependent on the type and arrangement of the substituents on the macrocycle. While native CDs drive the formation of a solid PPR, most substituted CDs induce micellar breakup, with dimethylated β-CD (DIMEB) having the strongest impact and randomly substituted CDs a much weaker disruptive effect. Using native α-CD as a "molecular trap", we perform competitive binding experiments-where two types of CDs thread together onto the polymer chains-to establish that DIMEB indeed has the highest propensity to form an inclusion complex with the polymer, while hydroxypropylated CDs do not thread. 1D (1)H NMR and ROESY experiments confirm the formation of a soluble PPR with DIMEB in which the CD binds preferentially to the PO units, thus providing the drive for the observed demicellization. A combination of dynamic light scattering (DLS) and small-angle neutron scattering (SANS) is used to extract detailed structural parameters on the micelles. A binding model is proposed, which exploits the chemical shifts of selected protons from the CD in conjunction with the Hill equation, to prove that the formation of the PPR is a negatively cooperative process, in which threaded DIMEBs hamper the entrance of subsequent macrocycles.

A general route to nanocrystal kebabs periodically assembled on stretched flexible polymer shish

Assembling nanoparticles into one-dimensional (1D) nanostructures with precisely controlled size and shape renders the exploration of new properties and construction of 1D miniaturized devices possible. The physical properties of such nanostructures depend heavily on the size, chemical composition, and surface chemistry of nanoparticle constituents, as well as the close proximity of adjacent nanoparticles within the 1D nanostructure. Chemical synthesis provides an intriguing alternative means of creating 1D nanostructures composed of self-assembled nanoparticles in terms of material diversity, size controllability, shape regularity, and low-cost production. However, this is an area where progress has been slower. We report an unconventional yet general strategy to craft an exciting variety of 1D nanonecklace-like nanostructures comprising uniform functional nanodiscs periodically assembled along a stretched flexible polymer chain by capitalizing on judiciously designed amphiphilic worm-like diblock copolymers as nanoreactors. These nanostructures can be regarded as organic-inorganic shish-kebabs, in which nanodisc kebabs are periodically situated on a stretched polymer shish. Simulations based on self-consistent field theory reveal that the formation of organic-inorganic shish-kebabs is guided by the self-assembled elongated star-like diblock copolymer constituents constrained on the highly stretched polymer chain.

Release of β-galactosidase from poloxamine/α-cyclodextrin hydrogels

All mammals lose their ability to produce lactase (β-galactosidase), the enzyme that cleaves lactose into galactose and glucose, after weaning. The prevalence of lactase deficiency (LD) spans from 2 to 15% among northern Europeans, to nearly 100% among Asians. Following lactose consumption, people with LD often experience gastrointestinal symptoms such as abdominal pain, bowel distension, cramps and flatulence, or even systemic problems such as headache, loss of concentration and muscle pain. These symptoms vary depending on the amount of lactose ingested, type of food and degree of intolerance. Although those affected can avoid the uptake of dairy products, in doing so, they lose a readily available source of calcium and protein. In this work, gels obtained by complexation of Tetronic 90R4 with α-cyclodextrin loaded with β-galactosidase are proposed as a way to administer the enzyme immediately before or with the lactose-containing meal. Both molecules are biocompatible, can form gels in situ, and show sustained erosion kinetics in aqueous media. The complex was characterized by FTIR that evidenced an inclusion complex between the polyethylene oxide block and α-cyclodextrin. The release profiles of β-galactosidase from two different matrices (gels and tablets) of the in situ hydrogels have been obtained. The influence of the percentage of Tetronic in media of different pH was evaluated. No differences were observed regarding the release rate from the gel matrices at pH 6 (t₅₀ = 105 min). However, in the case of the tablets, the kinetics were faster and they released a greater amount of 90R4 (25%, t₅₀ = 40–50 min). Also, the amount of enzyme released was higher for mixtures with 25% Tetronic. Using suitable mathematical models, the corresponding kinetic parameters have been calculated. In all cases, the release data fit quite well to the Peppas–Sahlin model equation, indicating that the release of β-galactosidase is governed by a combination of diffusion and erosion processes. It has been observed that the diffusion mechanism prevails over erosion during the first 50 minutes, followed by continued release of the enzyme due to the disintegration of the matrix.

Supramolecular hydrogels of α-cyclodextrin/reverse poloxamines/carbon-based nanomaterials and its multi-functional application

Supramolecular hydrogels were prepared using α-cyclodextrin (α-CD) and a poloxamine (reverse Tetronic 90R4, T90R4) which has four diblock arms with a poly(propylene oxide)–poly(ethylene oxide) (PPO–PEO) structure.

Supramolecular cyclodextrin-based drug nanocarriers

Hosting of polymers, lipids and drug conjugates makes cyclodextrins suitable to prepare biocompatible, targetable and stimuli-responsive supramolecular drug nanocarriers.

Photo-induced conversion from supramolecular to covalently linked polymers based on anthracene-appended amphiphiles

A photo-induced conversion from supramolecular to covalent polymers was achieved based on anthracene-appended amphiphiles.

First preparation of a triterpenoid-based supramolecular hydrogel in physiological phosphate buffered saline

A glycyrrhetinic acid-based supramolecular hydrogel was attained in physiological phosphate buffered saline for the first time.

A novel and effective surface design: conducting polymer/β-cyclodextrin host-guest system for cholesterol biosensor

The combination of supramolecules and conducting polymers (CPs) has gained much attention for the development of new immobilization matrices for biomolecules. Herein, an amperometric biosensor based on a novel conducting polymer, poly(2-(2-octyldodecyl)-4,7-di(selenoph-2-yl)-2H-benzo[d][1,2,3]triazole)) (PSBTz) and β-cyclodextrin (β-CD) for the detection of cholesterol, was constructed. The PSBTz film with β-CD was deposited on a graphite electrode by electropolymerization technique to achieve a suitable matrix for enzyme immobilization. Moreover, to justify the immobilization, alkyl chain containing conducting polymer (PSBTz) was designed, synthesized and electrochemically polymerized on the transducer surface. Alkyl chains in the structure of SBTz and hydroxyl groups of β-CD contributed to effective immobilization while protecting the suitable orientation of the biomolecule. Cholesterol oxidase (ChOx) was covalently immobilized onto the modified surface using N,N′-carbonyldiimidazole (CDI) as the cross-linking agent. After successful immobilization, amperometric biosensor responses were recorded at −0.7 V vs Ag/AgCl in phosphate buffer (pH 7.0). The apparent Michaelis-Menten constant (KM(app)), maximum current (Imax), limit of detection (LOD), and sensitivity values were determined: 28.9 μM, 12.1 μA, 0.005 μM, and 5.77 μA/μM cm(2), respectively. The fabricated biosensor was characterized using scanning electron microscopy (SEM) and cyclic voltammetry (CV) techniques. Finally, the prepared biosensor was successfully applied for the determination of cholesterol in blood samples.

Non-covalent hydrogels of cyclodextrins and poloxamines for the controlled release of proteins

Different types of gels were prepared by combining poloxamines (Tetronic), i.e. poly(ethylene oxide)/poly(propylene oxide) (PEO/PPO) octablock star copolymers, and cyclodextrins (CD). Two different poloxamines with the same molecular weight (ca. 7000) but different molecular architectures were used. For each of their four diblock arms, direct Tetronic 904 presents PEO outer blocks while in reverse Tetronic 90R4 the hydrophilic PEO blocks are the inner ones. These gels were prepared by combining α-CD and poloxamine aqueous solutions. The physicochemical properties of these systems depend on several factors such as the structure of the block copolymers and the Tetronic/α-CD ratio. These gels were characterized using differential scanning calorimetry (DSC), viscometry and X-ray diffraction measurements. The 90R4 gels present a consistency that makes them suitable for sustained drug delivery. The resulting gels were easily eroded: these complexes were dismantled when placed in a large amount of water, so controlled release of entrapped large molecules such as proteins (Bovine Serum Albumin, BSA) is feasible and can be tuned by varying the copolymer/CD ratio.

A dual-modality photoswitchable supramolecular polymer

Covalent or noncovalent linked polymers with stimuli-responsive properties have been well researched as a kind of advanced functional materials. However, little effort has been devoted to establishing a bridge for switching between covalent polymers and noncovalent polymers. Actually, such unitive system is promising because it can combine their chemical advantages of two types of polymers in a single and tunable platform. Herein, by taking advantage of reversible photodimerization of coumarins and host-guest assemblies with γ-cyclodextrin (γ-CD), we demonstrate a simple and effective way to construct a dual-modality supramolecular polymer, which can be switched between a noncovalent polymer and its corresponding covalent polymer in response to light stimuli. Moreover, this unique switchable polymer can also be employed to construct a dual-stimuli responsive supramolecular hydrogel with the surfactant cetyl trimethylammonium bromide (CTAB). This methodology establishes a bridge between the two "polymer mansions" and is promising to open a new class of photoswitchable materials.